yeah, it would be nice if we could create a new project inspired by dude as an opensource. This way we wouldn't be dependent of mikrotik will to develop the software. Maybe a kickstarter projetct to fund it. Something that big as open source? Yeah, not going to happen. The industry is flooded with ...

Happens fairly often for me, seem to be something to do with Capsman, and only my one AP does it the other AP's seem ok. Rebooting my RB2011 seems to fix it but only for a few hours.

ether10: bridge port received packet with own address as source address (4c:5e:0c:00:00:00), probably loop

The LED's are very bright, means I can't run it in any room where someone is going to sleep at all. While tape works it shouldn't be the answer. From my 2011's to my CCR they all have very bright blue LED's.

• Firewall
• Switch1
• Switch2
• SwitchEast
• SwitchFloor1

You don't have to get too creative. : - )

Best naming convention in a business. Don't want to confuse others that has to work on that network as well.

Have you ruled out the speedtest server as a possible issue?

Have you tried to connect another computer to WAN and test the throughput using a tool like iperf?

I have a setup where my Mikrotik is connected to my network via Eth1. On the network I have a bridge which bridges an ADSL modem into my network (using Vlans via a different router). From Eth 1 I do a PPPoE connection which works as expected and I can receive my traffic. Forwarding the traffic back ...

Has anyone gotten one of these yet? How is the build quality? How well does it run The Dude? Worth buying?

Good, there is a product for that. https://mikrotik.com/product/crs317_1g_16s_rm Great, does it support PoE Out for my home devices? :) I think your answer is No ... :) :) :) And why should I have SFP+ at home in such quantity - this is crazy . SFP+ - technology for SMB / Enterprise! R&D isn't ...

Really now? CCR isnt the kind of router intended for what you are looking for.

No. explane how your nas or gaming station use the 10 ge interface better than 1gig interface. How fast do you write to diks in the nas? How fast does the game machine receive packets - and last - how fast is your internet connection. :) There is no need for more than 1 gig connection at anny homes...

Want to set up a PtP link, the distance is 50M, what speed can one expect between two DISC Lite5 ac over that distance?

Already people are suggesting a hEX with 10 Gbps. This is getting more and more ridiculous! The router you want is A DIFFERENT MODEL. NOT a hEX. You should look in de MikroTik product gamma (or elsewhere) for the router you need, not suggest that the hEX is redesigned to be that router. For the peo...

So the next RC is what will address the long list of issues discussed in this thread ? So no security patched 41.4 ? What issues will be addressed ? WIll Netwatch be put back ? When is the scheduled next RC going to be released ? Does 42.1 stay as the current stable ? Or does it get withdrawn ? Hav...

Userman for ARM? Thank you Mikrotik.

Sent from my WAS-LX1 using Tapatalk

Does no one have suggestions?

Sent from my WAS-LX1 using Tapatalk

I have an IP address that is a public IP (let's call it 192.168.1.1/32 for demonstration purposes). Said IP address is forwarded via a tunnel with a Private IP address in the 10.0.0.0/8 range. All incoming traffic to 192.168.1.1 get forwarded to my 10.0.0.0/8 IP address over an PPPoE interface. I ha...

I'm to lazy to read all the posts, but seen one with the same issue I have in 6.40.1 LCD screen flashes after a power cycle, if I make a change to anything like, " read only mode on or off, the screen stops flashing. It will flash on and off after a power up if read only was left check or unch...

Anyone have an idea?

I have a private IP address of 192.168.1.3/32. I have a NATted static IP address of (1.1.1.1). The traffic to the static IP gets sent to 192.168.1.3/32. Which rules do I need to get my Mikrotik to accept traffic as the static IP? I set the static IP as an IP address but it doesn't seem to accept tra...

Have an issue on my 2011, the LCD screen stays on after a reboot showing "Starting services". Only way to get it off is by enabling and disabling the LCD screen. Started happening on the first RC that implemented the new bridges.

Sent from my HUAWEI VNS-L31 using Tapatalk

The LCD screen on my 2011UiAS-RM seems to be stuck on "starting services" on boot. Only way to get it off is to enable the LCD and then Disable it again. Started happening on the first 6.40RC release that implemented the new bridges.

because my isp work only PPPoE

Can put the modem in bridge and use the Mikrotik to do the PPPoE connection.

Sent from my SM-G900H using Tapatalk

I seem to recall that removing the bridge on my RB3011 resolved my port flapping issue.

Same here. CRS125. 8% cpu usage for Management. Nothing special set up, using ether 1 as master, and ether 2 - 24 as slaves of ether1.

None of my other RB'S do that.

Look at the crimping, patch panel and the wall boxes. They might have a broken connection somewhere.

Why not go fibre? Copper is really not worth rolling out, most customers will prefer Fibre anyway. Even for back bone links Fibre will work better.

+1 for udp.

Hi, Ok, so I have a CRS 125 (I plan on getting a CRS 112, but before I get a 112, I need a little bit of help. On my CRS 125 I can't seem to get PPPoE running over VLANS. I've tried using the switch chip as well as the cpu for vlans, and no matter what, I didn't get it to work (the vlans work, but t...

Hello, I'm not sure if this is the right place to ask, so if it isn't, please move it mods. I currently have a RB750GL. To this 750 I have my modem connected to Ethernet 1, to Ethernet 2 I have a switch connected,and to Ethernet 3 I have my Unify AP connected. My network subnets are as follow: 10.0....