Community discussions

MUM Europe 2020

Search found 28 matches

by biting77
Tue Mar 25, 2008 8:50 pm
Forum: RouterBOARD hardware
Topic: RB150 firmware upgrade problem
Replies: 8
Views: 3226

Re: RB150 firmware upgrade problem

thanks for the reply normis, i'm already trying the way you suggest i'm using mk version 3.6 after upgrade the router tell me to reboot, but after reboot the firmware is still 2.6 :( , is it possible that the write signal to the flash rom has been blocked? so the flash rom is only readable but not w...
by biting77
Tue Mar 25, 2008 12:44 pm
Forum: RouterBOARD hardware
Topic: RB150 firmware upgrade problem
Replies: 8
Views: 3226

RB150 firmware upgrade problem

i have RB150 with firmware version 2.6 and i want to upgrade to version 2.12, i'm using xterm for uploading new firmware but after reboot the firmware is still version 2.6 even int he terminal says firmware upgraded sucessful. any suggestion how to upgrade this rb150 firmware ?
by biting77
Wed Apr 25, 2007 11:51 am
Forum: General
Topic: filtering IPV6
Replies: 4
Views: 920

waw this not good :((... some one in my hot spot station using ipv6 for tunnelling and this affected my queue rules, the queue rules doesn't work. any idea to aviod this?
by biting77
Wed Apr 25, 2007 11:15 am
Forum: General
Topic: filtering IPV6
Replies: 4
Views: 920

filtering IPV6

any one know how to filtering ipv6 packet? i'm using mk2.9.42
by biting77
Sat Feb 24, 2007 3:16 pm
Forum: RouterBOARD hardware
Topic: RB 150 clock
Replies: 1
Views: 1154

RB 150 clock

hi all
i have a problem with rb150 clock is always back to jan 1st 2000. any one have this problem solved?
by biting77
Sat May 27, 2006 7:12 am
Forum: General
Topic: ip gateway hijacked
Replies: 10
Views: 1918

i have tried to set the arp in reply only mode and add arp list manually, it doesnt work because that dummy gateway using xp box and it has it own dhcp server. so set this to static it doesnt help and make my network totaly jam :(
by biting77
Fri May 26, 2006 11:03 am
Forum: General
Topic: ip gateway hijacked
Replies: 10
Views: 1918

now i move my ip gateway address to another ip, hope this works, if is still doesn work, i will find that person who did this and kick his butt... :evil:
by biting77
Fri May 26, 2006 8:25 am
Forum: General
Topic: ip gateway hijacked
Replies: 10
Views: 1918

it dosn't work....if this dummy gateway show's up my network is going down again :(
by biting77
Thu May 25, 2006 8:03 am
Forum: General
Topic: ip gateway hijacked
Replies: 10
Views: 1918

ok i will try it, thx
by biting77
Wed May 24, 2006 1:56 pm
Forum: General
Topic: ip gateway hijacked
Replies: 10
Views: 1918

ip gateway hijacked

hi i have a problem, my internal network ip address gateway (192.168.0.1) being hijacked, im using mk2.8.15 and dhcp server for my internal address. any one have any suggestion to aviod this happen again, i really hate this, this problem ruin my entire vacation :evil:
by biting77
Wed Nov 09, 2005 10:24 am
Forum: General
Topic: firewall problem with ip6
Replies: 1
Views: 846

firewall problem with ip6

hi guys have you ever get a problem with mk firewall rules with ip6? it looks mk firewall doesn't block any traffic from ip6, im using mk 2.8.28, i just find out this problem when i check my traffic. mr normis do you have any suggestion? or this problem fixed in mk2.9 ?
by biting77
Wed Nov 09, 2005 10:12 am
Forum: General
Topic: p2p passthrough and limited bandwidth
Replies: 4
Views: 1595

that rule should be blocking all p2p in 192.168.10.0/24 subnet except ip 192.168.10.25, if your ip address is not 192.168.10.25 then mk will drop your p2p connection
by biting77
Mon Nov 07, 2005 9:14 am
Forum: General
Topic: p2p passthrough and limited bandwidth
Replies: 4
Views: 1595

it would be very helpful if you give more specific information, to block p2p you can add firewall rule in forward section to drop all p2p except ip you let to pass. say you want to pass ip 192.168.0.5 to pass p2p rule and drop the rest of ip. code: ip firewall rule forward add src-address=!192.168.0...
by biting77
Wed Oct 26, 2005 4:42 pm
Forum: General
Topic: WHat is the Best ethernet interface card
Replies: 13
Views: 2727

for soho i use DLINK nic i already use it for 1,5 year without probem, i use DLINK because INTEL nic is too expensive in indonesia :D
by biting77
Wed Oct 26, 2005 4:36 pm
Forum: General
Topic: splitting traffic up and down in different connection
Replies: 2
Views: 924

splitting traffic up and down in different connection

hi guys i recently obtaining a internet link via vsat but for down link only and for the uplink i use leased line connection. the leased line bw is 64K for up and down, i'm planning to use the vsat for my primary downlink i use mk2.8.28 for routing, so far i still can't split traffic from my interna...
by biting77
Mon Sep 26, 2005 1:21 pm
Forum: General
Topic: Mangle and Queue only works for outgoing traffic
Replies: 3
Views: 1345

use winbox, onmax limit box enter 256000/256000 that will work to limit 256k down and 256 up
by biting77
Tue Jun 21, 2005 1:37 pm
Forum: General
Topic: 2 gateways problem
Replies: 4
Views: 1062

thx normis, now my mk runing using 3 gateways from different isp. thx man
by biting77
Tue Jun 21, 2005 1:29 pm
Forum: General
Topic: problem with multiple gateways
Replies: 1
Views: 739

problem with multiple gateways

hi. recently i have been installed mk2.8.15 with 3 different gateways from 3 different isp and 1 internal network, it work well but i had a problem to access mk from outside, from internal network i can access my mk but from outside i can't reach my mk router and if i ping 1 of three public ip insta...
by biting77
Tue Jun 07, 2005 12:03 pm
Forum: General
Topic: 2 gateways problem
Replies: 4
Views: 1062

yup, is it really can do with mk? because i have 2 isp connection and i want to split my load to 2 isp each 128k
by biting77
Tue Jun 07, 2005 8:58 am
Forum: General
Topic: 2 gateways problem
Replies: 4
Views: 1062

2 gateways problem

hi guys i have a problem in spilting my network into 2 gateways,i'm using mk2.8.15and i want to split ip 192.168.0.2-30 thru gateway 10.10.15.101 and ip 192.168.0.31-60 thru gateway 15.15.10.21, each public ip came from different isp my internal network using ip 192.168.0.0/26 and using dhcp. adding...
by biting77
Fri Jun 03, 2005 3:34 pm
Forum: General
Topic: ip v6
Replies: 1
Views: 914

ip v6

hi guy's
i want to know how to block packet which use ip v6 on mikrotik. say i want to block ip 192.168.201 on all port except port 80, one day i found someone on my network open windows pseudo tunnelling and it seem mikrotik unable to block this traffic. any suggestion maybe ?
by biting77
Mon Apr 04, 2005 5:22 am
Forum: General
Topic: A Newbie Question about managing bandwidth
Replies: 4
Views: 1081

use simple queue and enter the ip address u want to limit for example 192.168.22.10 and enter the limit u want to use 16000 for 16k, hope this help
by biting77
Tue Mar 29, 2005 12:43 pm
Forum: General
Topic: firewall problem
Replies: 1
Views: 594

firewall problem

hi there..
i have a problem with firewall, i want to blok all port in 1 ip addres but allow some port, for example ip 192.168.0.11 except port 80,443,1900,5050 and 5100 all dropped. any one maybe ha a suggestion?
by biting77
Tue Mar 15, 2005 1:10 pm
Forum: General
Topic: adding serial port on mk 2.8.12
Replies: 2
Views: 941

adding serial port on mk 2.8.12

hi a have a problem, im running mk 2.8.12 and i want to add a ppp dial out using serial modem, but my mobo just only have 1 serial port so i add a new add on pci to serial using chipset from netmos Nm9835CV but it seem mk didn't recognize my new serial card. any one maybe have the same problem can h...
by biting77
Mon Oct 25, 2004 2:38 pm
Forum: General
Topic: 2 isp connection
Replies: 14
Views: 4106

2 isp connection

hi all, i have a problem, i have 2 isp connection and i want to use both of them in mk so if 1 isp is down then the other take the route and when both of them available i need mk as load balancing. any one has done this with mk???
by biting77
Wed Sep 22, 2004 7:40 am
Forum: General
Topic: configuring 2 same ethernet card
Replies: 5
Views: 1654

thx mag.
about my smc card i had fix it yesterday. just onl need a bit playing with my mb bios he he he
by biting77
Tue Sep 21, 2004 5:48 am
Forum: General
Topic: configuring 2 same ethernet card
Replies: 5
Views: 1654

under /interface i only got 1 interface. so i dont know wheres the other one?. about my smc ethernet card is working ok if i use another brand for 2nd or 3rd ethenet
by biting77
Mon Sep 20, 2004 12:09 pm
Forum: General
Topic: configuring 2 same ethernet card
Replies: 5
Views: 1654

configuring 2 same ethernet card

hello there, i had a problem in configuring 2 ethernet card in mikrotik, when i use 2 different brand ex smc and intel in the driver list shows that i have 2 interface, but if i use same brand smc & smc or intel with intel, in the driver list just shows 1 interface, any one can help me solve this pr...