I can't either.

About the future CRS318-16P-2S+ will all the 16 ports have POE+ ?

Today I went back to the customer I tried once more to NAT ports 1723 and 8291 on the ISP's router, it worked. Now I can access from outise the Winbox and the VPN. But I have another problem that I can't solve it. This mangle rules I first post is wrong: /ip firewall mangle add action=mark-routing c...

Sorry I was not clear on that. So, I have the ISP router connected to the internet with public IP. The private IP of the this router is 192.168.10.1. I have another router with another public IP and with private IP 192.168.20.1. Each of this routers connect to WAN1 and WAN2 ports on MikroTik router.

I tried to NAT port 8291 (Winbox) too and doesn't work as well.

Enviado do meu ONEPLUS A3003 através do Tapatalk

Hi, I have a customer that needed 2 different WAN connecting to 2 different LAN. I installed a 16 port managed switch with 2 VLAN (VLAN1,VLAN2). From port 1 to 8 is VLAN1, from port 9 to15 is VLAN2 untagged. On port 16 I have VLAN1 and VLAN2 tagged. Then I installed an RB750Gr3 with this port config...

Any new release dates from MikroTik for LtAP mini and LtAP?

Can the new LtAP mini be used inside a bus for providing Wi-Fi access to internet to the passengeres? Can the GPS information be read remotley to determine the bus location?

I was talking about the NAT masquerade rule, but then I found out that I should replace it with the one you told me. on the VLAN20 interface I need to have both IP's, because if I only have the 110.64.22.218 I can't access the router or anything else in side the network. Hoping I can help anyone wit...

I have to try it. Should I replace the src-nat masquarade with this NAT in the firewall or where will I put it?

Here's my configuration (Public IP's are fictional): Ether1 is WAN Ether2 is LAN /interface vlan add interface=ether1 name=vlan20 vlan-id=20 /ip hotspot profile set [ find default=yes ] html-directory=flash/hotspot /ip pool add name=dhcp_pool1 ranges=192.168.0.1-192.168.0.253 /ip dhcp-server add add...

What do you need from my current configuration?

Hi, My ISP provide me the following cenario for an fixed public IP (all IP are fictional): WAN IP: 110.64.22.218 IP alias: 83.241.149.227 Subnet: 255.255.255.252 Gateway: 110.64.22.217 VLAN 20 DNS1: 62.28.40.173 DNS2: 62.28.116.41 If setup everything on my RB2011 but I can't acess the internet when ...

It's working now! This is what I've done: on secrets I assigned a static IP to the user in the Remote Address field, then on IP | Routes for each route I created before I set the Gateway with the IP I assigned on the secret. The problem was that in the secret I had no static IP, and in Profile I was...

I have 4 LAN's that I need to access on the other end, as you can see in my previous post. How can I add the 4 LAN's in the route field?

The PPTP restarts every time we have an internet outage or if we have a power outage and the UPS dosen't work. The connection is initiated by the other router, which is not managed by me, so the PPTP interface is dynamic. On the routes I've setup as gateway the PPTP interface. Here's the /ip route e...

Hi, I have a lan-to-lan via PPTP setup on two CCR1009 running RouterOS 6.31. One of the CCR1009 is managed by me and the other one by another company. I created some routes on IP | Routes to connect to the remote LAN and everything works fine. The problem is when the PPTP connection restarts the Gat...

Hi, Been looking for to buy two QRT 5 AC, but studing on how to best ground the antennas I found out that the POE included with the QRT dosen't seem to have ground. I've seen this on Ubiquiti POE's where we can drain any ESD to the AC plug. Why does MikroTik supply such a "poor" POE to thi...

Hi, A few days ago I replaced an old DrayTek 3900 with an CCR1009-8G-1S at one of my customers. Everything started to runner much better but two days ago we found a problem. When I run a network scan application (in this case Advanced IP Scanner) I start to see the all range of IP's (free IP's) poin...