Community discussions

Search found 15 matches

by kraljek
Tue Jun 04, 2019 9:21 pm
Forum: Forwarding Protocols
Topic: route ospf error -> Discarding packet: locally originated
Replies: 23
Views: 27587

Re: route ospf error -> Discarding packet: locally originated

Hi, I have same issue. One year OSPF work great, and before few weaks I see lot of errors in log on cca 20 CCR routers (I have few Cisco routers in same backbone and I dont have any problems in log). Only MT router who have one OSPF connection on same broadcast domain dont have this errors. Every ro...
by kraljek
Tue Sep 29, 2015 7:19 pm
Forum: General
Topic: Local address Asterix to specific SIP public address and vice versa , how?
Replies: 2
Views: 427

Re: Local address Asterix to specific SIP public address and vice versa , how?

You will need NAT and Filter rules in the firewall.

Yes, I know that, but I need some example, because my config not work.
by kraljek
Tue Sep 29, 2015 6:54 pm
Forum: General
Topic: Local address Asterix to specific SIP public address and vice versa , how?
Replies: 2
Views: 427

Local address Asterix to specific SIP public address and vice versa , how?

Hi, Asterix 192.168.1.2---------192.168.1.1(MT)1.1.1.1-----------INternet - 2.2.2.2 SIP Server My question is how I can told MT that 192.168.1.2 only can get 2.2.2.2 and 2.2.2.2 can only get 192.168.1.2 I dont want that any other IP from local network or Internet public IP can get Asterix. Port what...
by kraljek
Mon Sep 28, 2015 12:07 pm
Forum: General
Topic: DST-NAT allow only from specified SRC address
Replies: 1
Views: 378

DST-NAT allow only from specified SRC address

Hi, how I can specified source adresse that can resolve through the public IP local IP 1.1.1.1 - - -- - ---- 2.2.2.2/Mikrotik/192.168.1.1 ---- - -- - 192.168.1.2 /ip firewall nat add chain=dstnat dst-port=1234 dst-address=2.2.2.2 action=dst-nat \ to-addresses=192.168.1.2 to-port=1234 I want that onl...
by kraljek
Thu Sep 17, 2015 11:13 pm
Forum: General
Topic: Display Public IP, not Router IP, how?
Replies: 2
Views: 509

Display Public IP, not Router IP, how?

Hi,


I have problems with forwarding. Dst nat work great, but on synology cloudstation I have user that connected from outside and I dont see his external IP, I see only of every user IP of my local gateway on MT, 10.0.0.1.

Before, on tplink, siemens and other routers, all work great.



Pls help
by kraljek
Thu Jun 25, 2015 8:05 pm
Forum: General
Topic: Direct NAT
Replies: 1
Views: 785

Direct NAT

Hi all, I need direct connection to device on local network. I have Synology Diskstation on 10.0.0.254/24 and installed cloudstation. MT is on 10.0.0.1/24. NAT work great, dst add 1.1.1.1 /6690 to address 10.0.0.254 /6690 - 6690 is tcp port. 5 user connected to outside address 1.1.1.1. But when i wa...
by kraljek
Tue Jun 23, 2015 10:35 pm
Forum: General
Topic: VLAN MNG
Replies: 0
Views: 482

VLAN MNG

Hi all, I need little help. Conf CRS125 - VLAN 10 (eth2) - 1.1.1.1/30 VLAN 20 (eth3) - Managament - 10.0.0.1/24 ETH1 - wan - L2 RB951 - VLAN 10 (eth1) - 1.1.1.2/30 VLAN 20 (eth1) - 10.0.0.2/24 ETH2 - Local network 192.168.1.0/24 All works great, but i have problems with ping, I can ping Managament I...
by kraljek
Mon Jun 15, 2015 3:49 pm
Forum: Beginner Basics
Topic: CRS125 + RB951 VLAN
Replies: 0
Views: 645

CRS125 + RB951 VLAN

Hi all, I need help about VLAN . CRS125 EHT1 go to internet - IP range for Internet 1.1.1.0/24 ETH2 go to SIP server - Internal IP range for VOIP Trunk 10.0.0.0/16 - this is complete on internal network ETH3 - VLAN10 - IP 1.1.1.5/30 gw - 1.1.1.6 VLAN20 - IP 10.0.0.5/30 gw 10.0.0.6 RB951 Eth1 - VLAN1...
by kraljek
Sat May 16, 2015 7:50 am
Forum: Beginner Basics
Topic: SIP - priority - help
Replies: 1
Views: 478

SIP - priority - help

Hi all, I need priority for SIP but with another way. I tortue two weeks with this and i dont have ideas. Speed of Internet connection is 10/10Mbit Scenario example: http://minerva-graphica.hr/images/scen.png I Know all ip adresses. I want that Phones with 192.168.1.101-103 have higher priority cons...
by kraljek
Tue May 12, 2015 1:23 pm
Forum: General
Topic: Simple QOS for VOIP
Replies: 2
Views: 11487

Simple QOS for VOIP

Hi all, i need example for VOIP priority on other traffic. What exactly i need, I whant that all SIP phones on internal network 192.168.1.0/24 have priority on all other traffic, but I know what is my four public IPs of SIP servers (etc. public ip 172.16.16.1, 172.16.16.2, 172.16.16.3, 172.16.16.4)....
by kraljek
Fri May 08, 2015 10:19 am
Forum: General
Topic: Allow few external public adresses on firewall on port 25
Replies: 1
Views: 299

Allow few external public adresses on firewall on port 25

Hi all, I need help. I have two range of public addresses 10.10.0.0/23 and 172.10.0.0 /24 in this two range is one public adress 10.10.0.8/30 This public adress is translate to port 25 on internal 192.168.1.10/24 where is smtp server. All other ports is blocked. I whant that only allowed public addr...
by kraljek
Tue Apr 28, 2015 8:40 am
Forum: General
Topic: Webfig skins (tutorial)
Replies: 100
Views: 93336

Re: Webfig skins (tutorial)

Hi all, Designes is great options in web interface to remove some items for end users. But i have problem with USERS panel. I have two users admin and wifi user who can change only wifi SSID and password. If I want that user with wifi can change password on account, I can only check or uncheck all u...
by kraljek
Sat Apr 25, 2015 11:10 pm
Forum: General
Topic: Icons on login page
Replies: 0
Views: 231

Icons on login page

Hi all, is great options design skin for disable one or more panels. But for end customers, i need question. How i can remove icons (winbox, telnet, graphs license and help) from login page? I whant only Login and Password, and after that when customers enter in MT, there is only etc. wireless SSID ...
by kraljek
Sat Apr 25, 2015 11:04 pm
Forum: General
Topic: User privileges only for WiFi
Replies: 3
Views: 496

Re: User privileges only for WiFi

Im resolve problem, thrue the web interface, design view is great options to enable only few panels for end users.

THx
by kraljek
Fri Apr 24, 2015 8:26 am
Forum: General
Topic: User privileges only for WiFi
Replies: 3
Views: 496

User privileges only for WiFi

Hi all, I'm old MT user, but new on forum. I have question about user privileges. In few offices I have MT 951, and i dont forbid access on him. If customer change any settings, customer will not have a Internet or something else, no mather. But, I whant that customer can change ONLY WiFi AP name an...