MikroTik

krzysztof

Like "futurion" I have reported many times that IGMP/multicast does not work properly. Mikrotik lies that it works in SwOS and does nothing to fix it. It is a waste of time to use Mikrotik if you want to use IGMP/multicast. I test every few months and nothing changes. Mikrotik produces a l...

krzysztof

You can't do anything with X710 this card doesn't work well with mikrotik. I've been testing for a few months. Intel E810 is great.

krzysztof

Intel X710 is a very bad card with problems, please don't even try to use it. I recommend it, it works perfectly in Mikrotik Intel E810, the system is newer, faster and has more functions, for example: Intel E810-XXVDA2 Ethernet 10/25Gb 2-port Compatible SFP-RJ45, SFP, SFP+ and SFP28 Adapter Intel E...

krzysztof

Too low time for tcp-established-timeout=1h causes problems with some VPN tunnels I recommend tcp-established-timeout=3h.

krzysztof

In OS 7.18.0 mikrotik increased the number of entries from 1048576 to as many as you have RAM 1GB = 1028096 example 8GB = 8224768 entries. As many entries as you have memory.

krzysztof

Hello,
Mikrotik has broken something in the drivers and currently all cards with the Intel Ethernet Controller X710 chipset have stopped working.

Report the problem to Mikrotik support and maybe they will fix it faster.
Don't waste your time, it's a driver problem.

krzysztof

Wireguard has serious limitations. Wireguard only works well in ads. Most softphone programs VOIP don't work in Wireguard. SIP isn't working properly. Waste of time Wireguard is not suitable for SIP. Please remember that Wireguard only works on layer 3 and needs routing everywhere. I did many tests ...

krzysztof

Wireguard has serious limitations. Wireguard only works well in ads. Most softphone programs VOIP don't work in Wireguard. SIP isn't working properly. Waste of time Wireguard is not suitable for SIP. Please remember that Wireguard only works on layer 3 and needs routing everywhere. I did many tests ...

krzysztof

SSH crash! The SSH host key generation end regeneration problem is still very present in 7.4.1 SSH stops working when we have OS 7.x in the following situation: 1. When we set the key siz from 1024 to 8192 bits with these two commands: /ip ssh set strong-crypto=yes host-key-size=8192 2. /ip ssh rege...

krzysztof

The same error continues. In X86 v7.1 beta 5 doesn't boot directly from CD Image After a few tries, I started OS 7.1beta5 on X86 But it cannot be done directly from CD Image. OS will not start. You need to upgrade from OS 6.48.1 to 7.1beta5. Then OS 7.1beta5 on X86 will start The OS has finally star...

krzysztof

In X86 v7.1 beta 4 doesn't boot. I tried many times on different platforms and always the same. The system freezes while booting.
In X86 v7.1 beta 3 also does not start.
Starts Well In X86 v7.1 beta 2

When will you correct this mistake?
I am waiting impatiently when it boots to x86.

krzysztof

In X86 v7.1 beta 3 the system doesn't boot,
In X86 v7.1 beta 4 the system doesn't boot,

In X86 v7.1beta2 system boot very well,

krzysztof

Mikrotik despite my many requests.
I showed what doesn't work in PIM

It doesn't correct errors.
Do not use PIM in Mikrotik has many errors and mikrotik don't improve them.

krzysztof

Mikrotik despite my many requests.
I showed what doesn't work in PIM

It doesn't correct errors.
Do not use PIM in Mikrotik has many errors and mikrotik don't improve them.

krzysztof

Important announcement. IGMP snooping works ok!!

From the RuterOS version 6.43rc66, IGMP snooping works.

I don't know whether to be happy or congratulate, whether to cry, I waited for IGMP 10 years!
Many years of requests and reminders.

Thank you IPTV works.

krzysztof

Important announcement. IGMP snooping works ok!!
From the RuterOS version 6.43rc66, IGMP snooping works.

I don't know whether to be happy or congratulate, whether to cry, I waited for IGMP 10 years!
Many years of requests and reminders.

Thank you IPTV works.

krzysztof

Important announcement. IGMP snooping works ok!!

From the RuterOS version 6.43rc66, IGMP snooping works.

I don't know whether to be happy or congratulate, whether to cry, I waited for IGMP 10 years!
Many years of requests and reminders.

Thank you IPTV works.

krzysztof

My company is a TV and internet provider. As PIM routers I use several Cisco ASR 1001-X and they work perfectly !! ALL Cisco switches also work perfectly !! Huawei also work ok - sometimes he has problems. All juniper machines also work perfectly !! Extreme networks also work great !! Totolink also ...

krzysztof

These are my sample IGMP support tickets Re: [Ticket#2018020422000183] RouterOS 6.41.1 problem with IGMP snooping Re: [Ticket#2016100722001021] RE: Errors in the IGMP Re: [Ticket#2015072266000821] IGMP Snoping. When? Re: [Ticket#2015011666000782] IGMP Snoping compatible with CISCO. When? [Ticket#201...

krzysztof

IGMP still has problems with overloading. PIM for IGMP continues to add multicast streams incorrectly! I want to show an error in my laboratory I am writing please and nothing. I giving my phone number to Poland and nothing Why do you treat your clients like that? I like this equipment And I'm force...

krzysztof

You're wrong. You don't read the forum. Check how many requests to fix the IGMP. TV operators are asking for it many years! Nobody uses it because it doesn't work, it's easy. I am asking for many years and not only me. MikroTik switches, can not be bought. Important not one multicast stream but a fe...

krzysztof

How much do you have connected TV box 100,200,1000? How much do you have multicast groups? Currently, I use 61 multicast groups. The problem is extinguishing the multicast groups, mikrotik doesn't send information about leaving the groups to the pim router, and transmissions are added for 2 minutes....

krzysztof

Please don't test IGMP snooping still doesn't work.
I am asking engineers from Mikrotik to test it on my TV network, but they don't want to.
So many years please Mikrotika to do IGMP snooping and nothing.
Why don't you listen to your customers?
krzysztof@pawluk.org

krzysztof

Please don't test IGMP snooping still doesn't work.
I am asking engineers from Mikrotik to test it on my TV network, but they don't want to.
So many years please Mikrotika to do IGMP snooping and nothing.
Why don't you listen to your customers?
krzysztof@pawluk.org

krzysztof

Hello, I've been testing a group of 700 TV IP tuners for a long time (IP TV). I tested PIM protcol with CCR CCR1009, CCR1036 and X86 (Ethernet Controller Intel 82599 10Gb/s). I've always tested the same configuration. Tests showed that CCR works very badly. Every moment there were breaks in Video an...

krzysztof

The BGP process needs the whole core. RouterOS does not know that there are virtual cores and will allocate calculations to the cores which are already burdened by another process. When you don't turn off Hyper-threading you will slow down BGP by to 50%. This rule applies to BGP because it doesn't s...

krzysztof

X86_64 - This is super secret. RouterOS X86_64 with BGP works around 200-300% faster than CCR1036 and CCR1072. It is important to turn off Hyper-threading! X86_64 works just fine with the platforms where intel is on the motherboard is very important! For example, the X86_64 works well with the HP DL...

krzysztof

nowadays memory controllers are very fast, so we will not lose any of performance. You will, in fact. And that is a well known fact. Memory controller won't help you when it comes to a twice as large pointer size. Having said that, I don't think it's a real reason why RouterOS x64 does not exist ou...

krzysztof

Architecture x86_64 bit It works very well and efficiently. I don't know why Mikrotik not given officially as a start. I know about the x86_64 bit stabel since May 2016 years There are several important settings to work, but mikrotik nothing reports about them. [admin@MikroTik] /system resource> pri...

krzysztof

IGMP and PIM.
Normis said that this will not improve.
IGMP and PIM will not be improved and supported in the coming years

krzysztof

These are known bugs general IGMP and PIM.
Normis said that this will not improve.
IGMP and PIM will not be improved and supported in the coming years

krzysztof

Hello, I wrote to Normis. On another forum you wrote. "IGMP snooping development will not be sped up if one person will register many forum accounts and post the same request over and over again" "IGMP snooping is currently not in development and we have no plans to make it in near f...

krzysztof

Hello, I wrote to Normis. On another forum you wrote. "IGMP snooping development will not be sped up if one person will register many forum accounts and post the same request over and over again" "IGMP snooping is currently not in development and we have no plans to make it in near fu...

krzysztof

Hello, I'm waiting and I'm waiting and I can't wait. We IPTV operators very please a full IGMP. Urgently please correct IGMP RouterOS. We must continue to buy from other manufacturers. I ask for an urgent correction in the PIM and IGMP full and not IGMP Proxy When? Regards, Polish TV operator Krzysz...

krzysztof

Hello,

Very good idea with GPON.
But when will run full IGMP without that GPON does not operate to the fullest!
GPON without IGMP is unnecessary.

Regards.
Krzysztof Pawluk
http://www.pawluk.org
TV Poland

krzysztof

Hello How can I ask for? How long do I ask? Very many people have written about it. I am a regional provider of IPTV in Poland. Very quickly it needs IGMP Snooping in RouterOS (Switches). IGMP Proxy authentication does not work with TV tuners. I need a couple of thousands of such devices. When IGMP ...

Search found 36 matches

Re: Multicast across switches does not work (CRS3xx)

Re: After rebooting RouterOS x86 7.15.3, the link on the SFP+ port of the Intel X710 disappears

Re: After rebooting RouterOS x86 7.15.3, the link on the SFP+ port of the Intel X710 disappears

Re: Connection Tracking question, Full table

Re: Connection Tracking question, Full table

Re: After rebooting RouterOS x86 7.15.3, the link on the SFP+ port of the Intel X710 disappears

Re: VoIP over Wireguard Vpn: one way audio problem.

Re: Forward WAN port to another subnet/router LAN [SOLVED]

Re: v7.4.1 [stable] is released!

Re: v7.1beta5 [development] is released!

Re: v7.1beta4 [development] is released!

Re: v7.1beta4 [development] is released!

Re: CSS326 IGMP Snooping not working!

Re: Help setting up Entertain 2 with PIM

Re: Excessive broadcasts/multicast, probably a loop

Re: hardware offload for rb922 and hEX

Re: Router config for IPTV (non-VLAN)

Re: Router config for IPTV (non-VLAN)

Re: Router config for IPTV (non-VLAN)

Re: v6.42.5 [current]

Re: Router config for IPTV (non-VLAN)

Re: Router config for IPTV (non-VLAN)

Re: Router config for IPTV (non-VLAN)

Re: hardware offload for rb922 and hEX

Re: PIM Routing Not Working

Re: X86_64 ROS - 64bit Mikrotik [SOLVED]

Re: X86_64 ROS - 64bit Mikrotik [SOLVED]

Re: X86_64 ROS - 64bit Mikrotik [SOLVED]

Re: X86_64 ROS - 64bit Mikrotik [SOLVED]

Re: Multicast VLAN over a EOIP/IPSec tunnel

Re: Excessive broadcasts/multicast, probably a loop

Re: v6.35.4 [current] is released!

Re: v6.35.4 [current] is released!

Re: v6.34.2 [current] is released!

Re: Newsletter 68

Re: IGMP Snooping