Community discussions

MikroTik App

Search found 30 matches

by krzysztof
Thu Feb 22, 2024 4:56 pm
Forum: General
Topic: VoIP over Wireguard Vpn: one way audio problem.
Replies: 17
Views: 2638

Re: VoIP over Wireguard Vpn: one way audio problem.

Wireguard has serious limitations. Wireguard only works well in ads. Most softphone programs VOIP don't work in Wireguard. SIP isn't working properly. Waste of time Wireguard is not suitable for SIP. Please remember that Wireguard only works on layer 3 and needs routing everywhere. I did many tests ...
by krzysztof
Tue Feb 20, 2024 12:50 pm
Forum: General
Topic: Forward WAN port to another subnet/router LAN [SOLVED]
Replies: 8
Views: 1980

Re: Forward WAN port to another subnet/router LAN [SOLVED]

Wireguard has serious limitations. Wireguard only works well in ads. Most softphone programs VOIP don't work in Wireguard. SIP isn't working properly. Waste of time Wireguard is not suitable for SIP. Please remember that Wireguard only works on layer 3 and needs routing everywhere. I did many tests ...
by krzysztof
Wed Aug 24, 2022 9:48 pm
Forum: Announcements
Topic: Re: v7.4.1 [stable] is released!
Replies: 99
Views: 32014

Re: v7.4.1 [stable] is released!

SSH crash! The SSH host key generation end regeneration problem is still very present in 7.4.1 SSH stops working when we have OS 7.x in the following situation: 1. When we set the key siz from 1024 to 8192 bits with these two commands: /ip ssh set strong-crypto=yes host-key-size=8192 2. /ip ssh rege...
by krzysztof
Thu Mar 18, 2021 1:18 am
Forum: RouterOS beta
Topic: v7.1beta5 [development] is released!
Replies: 292
Views: 85400

Re: v7.1beta5 [development] is released!

The same error continues. In X86 v7.1 beta 5 doesn't boot directly from CD Image After a few tries, I started OS 7.1beta5 on X86 But it cannot be done directly from CD Image. OS will not start. You need to upgrade from OS 6.48.1 to 7.1beta5. Then OS 7.1beta5 on X86 will start The OS has finally star...
by krzysztof
Sun Feb 14, 2021 6:31 pm
Forum: RouterOS beta
Topic: v7.1beta4 [development] is released!
Replies: 211
Views: 56388

Re: v7.1beta4 [development] is released!

In X86 v7.1 beta 4 doesn't boot. I tried many times on different platforms and always the same. The system freezes while booting.
In X86 v7.1 beta 3 also does not start.
Starts Well In X86 v7.1 beta 2

When will you correct this mistake?
I am waiting impatiently when it boots to x86.
by krzysztof
Fri Feb 05, 2021 2:37 am
Forum: RouterOS beta
Topic: v7.1beta4 [development] is released!
Replies: 211
Views: 56388

Re: v7.1beta4 [development] is released!

In X86 v7.1 beta 3 the system doesn't boot,
In X86 v7.1 beta 4 the system doesn't boot,

In X86 v7.1beta2 system boot very well,
by krzysztof
Mon Mar 04, 2019 3:17 am
Forum: SwOS
Topic: CSS326 IGMP Snooping not working!
Replies: 12
Views: 12337

Re: CSS326 IGMP Snooping not working!

Mikrotik despite my many requests.
I showed what doesn't work in PIM

It doesn't correct errors.
Do not use PIM in Mikrotik has many errors and mikrotik don't improve them.
by krzysztof
Mon Mar 04, 2019 3:13 am
Forum: General
Topic: Help setting up Entertain 2 with PIM
Replies: 2
Views: 1342

Re: Help setting up Entertain 2 with PIM

Mikrotik despite my many requests.
I showed what doesn't work in PIM

It doesn't correct errors.
Do not use PIM in Mikrotik has many errors and mikrotik don't improve them.
by krzysztof
Sat Sep 01, 2018 2:06 am
Forum: General
Topic: Excessive broadcasts/multicast, probably a loop
Replies: 3
Views: 3909

Re: Excessive broadcasts/multicast, probably a loop

Important announcement. IGMP snooping works ok!!

From the RuterOS version 6.43rc66, IGMP snooping works.


I don't know whether to be happy or congratulate, whether to cry, I waited for IGMP 10 years!
Many years of requests and reminders.

Thank you IPTV works.
by krzysztof
Fri Aug 31, 2018 1:19 am
Forum: General
Topic: hardware offload for rb922 and hEX
Replies: 11
Views: 8031

Re: hardware offload for rb922 and hEX

Important announcement. IGMP snooping works ok!!
From the RuterOS version 6.43rc66, IGMP snooping works.


I don't know whether to be happy or congratulate, whether to cry, I waited for IGMP 10 years!
Many years of requests and reminders.

Thank you IPTV works.
by krzysztof
Fri Aug 31, 2018 1:16 am
Forum: Beginner Basics
Topic: Router config for IPTV (non-VLAN)
Replies: 18
Views: 22695

Re: Router config for IPTV (non-VLAN)

Important announcement. IGMP snooping works ok!!

From the RuterOS version 6.43rc66, IGMP snooping works.


I don't know whether to be happy or congratulate, whether to cry, I waited for IGMP 10 years!
Many years of requests and reminders.

Thank you IPTV works.
by krzysztof
Wed Jul 04, 2018 2:53 am
Forum: Beginner Basics
Topic: Router config for IPTV (non-VLAN)
Replies: 18
Views: 22695

Re: Router config for IPTV (non-VLAN)

My company is a TV and internet provider. As PIM routers I use several Cisco ASR 1001-X and they work perfectly !! ALL Cisco switches also work perfectly !! Huawei also work ok - sometimes he has problems. All juniper machines also work perfectly !! Extreme networks also work great !! Totolink also ...
by krzysztof
Wed Jul 04, 2018 2:08 am
Forum: Beginner Basics
Topic: Router config for IPTV (non-VLAN)
Replies: 18
Views: 22695

Re: Router config for IPTV (non-VLAN)

These are my sample IGMP support tickets Re: [Ticket#2018020422000183] RouterOS 6.41.1 problem with IGMP snooping Re: [Ticket#2016100722001021] RE: Errors in the IGMP Re: [Ticket#2015072266000821] IGMP Snoping. When? Re: [Ticket#2015011666000782] IGMP Snoping compatible with CISCO. When? [Ticket#201...
by krzysztof
Tue Jul 03, 2018 3:08 am
Forum: Announcements
Topic: v6.42.5 [current]
Replies: 124
Views: 54028

Re: v6.42.5 [current]

IGMP still has problems with overloading. PIM for IGMP continues to add multicast streams incorrectly! I want to show an error in my laboratory I am writing please and nothing. I giving my phone number to Poland and nothing Why do you treat your clients like that? I like this equipment And I'm force...
by krzysztof
Tue Jul 03, 2018 2:47 am
Forum: Beginner Basics
Topic: Router config for IPTV (non-VLAN)
Replies: 18
Views: 22695

Re: Router config for IPTV (non-VLAN)

You're wrong. You don't read the forum. Check how many requests to fix the IGMP. TV operators are asking for it many years! Nobody uses it because it doesn't work, it's easy. I am asking for many years and not only me. MikroTik switches, can not be bought. Important not one multicast stream but a fe...
by krzysztof
Tue May 01, 2018 5:39 pm
Forum: Beginner Basics
Topic: Router config for IPTV (non-VLAN)
Replies: 18
Views: 22695

Re: Router config for IPTV (non-VLAN)

How much do you have connected TV box 100,200,1000? How much do you have multicast groups? Currently, I use 61 multicast groups. The problem is extinguishing the multicast groups, mikrotik doesn't send information about leaving the groups to the pim router, and transmissions are added for 2 minutes....
by krzysztof
Fri Apr 27, 2018 1:35 am
Forum: Beginner Basics
Topic: Router config for IPTV (non-VLAN)
Replies: 18
Views: 22695

Re: Router config for IPTV (non-VLAN)

Please don't test IGMP snooping still doesn't work.
I am asking engineers from Mikrotik to test it on my TV network, but they don't want to.
So many years please Mikrotika to do IGMP snooping and nothing.
Why don't you listen to your customers?
krzysztof@pawluk.org
by krzysztof
Fri Apr 27, 2018 1:33 am
Forum: General
Topic: hardware offload for rb922 and hEX
Replies: 11
Views: 8031

Re: hardware offload for rb922 and hEX

Please don't test IGMP snooping still doesn't work.
I am asking engineers from Mikrotik to test it on my TV network, but they don't want to.
So many years please Mikrotika to do IGMP snooping and nothing.
Why don't you listen to your customers?
krzysztof@pawluk.org
by krzysztof
Wed Apr 11, 2018 5:45 pm
Forum: Forwarding Protocols
Topic: PIM Routing Not Working
Replies: 5
Views: 3833

Re: PIM Routing Not Working

Hello, I've been testing a group of 700 TV IP tuners for a long time (IP TV). I tested PIM protcol with CCR CCR1009, CCR1036 and X86 (Ethernet Controller Intel 82599 10Gb/s). I've always tested the same configuration. Tests showed that CCR works very badly. Every moment there were breaks in Video an...
by krzysztof
Thu Mar 30, 2017 12:30 am
Forum: General
Topic: X86_64 ROS - 64bit Mikrotik [SOLVED]
Replies: 92
Views: 72944

Re: X86_64 ROS - 64bit Mikrotik [SOLVED]

The BGP process needs the whole core. RouterOS does not know that there are virtual cores and will allocate calculations to the cores which are already burdened by another process. When you don't turn off Hyper-threading you will slow down BGP by to 50%. This rule applies to BGP because it doesn't s...
by krzysztof
Mon Mar 27, 2017 2:49 am
Forum: General
Topic: X86_64 ROS - 64bit Mikrotik [SOLVED]
Replies: 92
Views: 72944

Re: X86_64 ROS - 64bit Mikrotik [SOLVED]

X86_64 - This is super secret. RouterOS X86_64 with BGP works around 200-300% faster than CCR1036 and CCR1072. It is important to turn off Hyper-threading! X86_64 works just fine with the platforms where intel is on the motherboard is very important! For example, the X86_64 works well with the HP DL...
by krzysztof
Sun Feb 26, 2017 1:13 am
Forum: General
Topic: X86_64 ROS - 64bit Mikrotik [SOLVED]
Replies: 92
Views: 72944

Re: X86_64 ROS - 64bit Mikrotik [SOLVED]

nowadays memory controllers are very fast, so we will not lose any of performance. You will, in fact. And that is a well known fact. Memory controller won't help you when it comes to a twice as large pointer size. Having said that, I don't think it's a real reason why RouterOS x64 does not exist ou...
by krzysztof
Fri Feb 17, 2017 3:12 am
Forum: General
Topic: X86_64 ROS - 64bit Mikrotik [SOLVED]
Replies: 92
Views: 72944

Re: X86_64 ROS - 64bit Mikrotik [SOLVED]

Architecture x86_64 bit It works very well and efficiently. I don't know why Mikrotik not given officially as a start. I know about the x86_64 bit stabel since May 2016 years There are several important settings to work, but mikrotik nothing reports about them. [admin@MikroTik] /system resource> pri...
by krzysztof
Sat Jan 21, 2017 1:14 pm
Forum: Forwarding Protocols
Topic: Multicast VLAN over a EOIP/IPSec tunnel
Replies: 7
Views: 6303

Re: Multicast VLAN over a EOIP/IPSec tunnel

IGMP and PIM.
Normis said that this will not improve.
IGMP and PIM will not be improved and supported in the coming years
by krzysztof
Wed Jan 11, 2017 3:22 am
Forum: General
Topic: Excessive broadcasts/multicast, probably a loop
Replies: 3
Views: 3909

Re: Excessive broadcasts/multicast, probably a loop

These are known bugs general IGMP and PIM.
Normis said that this will not improve.
IGMP and PIM will not be improved and supported in the coming years
by krzysztof
Mon Jul 18, 2016 1:14 am
Forum: Announcements
Topic: v6.35.4 [current] is released!
Replies: 51
Views: 34490

Re: v6.35.4 [current] is released!

Hello, I wrote to Normis. On another forum you wrote. "IGMP snooping development will not be sped up if one person will register many forum accounts and post the same request over and over again" "IGMP snooping is currently not in development and we have no plans to make it in near f...
by krzysztof
Sun Jul 10, 2016 1:03 pm
Forum: Announcements
Topic: v6.35.4 [current] is released!
Replies: 51
Views: 34490

Re: v6.35.4 [current] is released!

Hello, I wrote to Normis. On another forum you wrote. "IGMP snooping development will not be sped up if one person will register many forum accounts and post the same request over and over again" "IGMP snooping is currently not in development and we have no plans to make it in near fu...
by krzysztof
Tue Feb 23, 2016 4:49 am
Forum: Announcements
Topic: v6.34.2 [current] is released!
Replies: 60
Views: 33686

Re: v6.34.2 [current] is released!

Hello, I'm waiting and I'm waiting and I can't wait. We IPTV operators very please a full IGMP. Urgently please correct IGMP RouterOS. We must continue to buy from other manufacturers. I ask for an urgent correction in the PIM and IGMP full and not IGMP Proxy When? Regards, Polish TV operator Krzysz...
by krzysztof
Thu Nov 19, 2015 5:35 am
Forum: Announcements
Topic: Newsletter 68
Replies: 57
Views: 26503

Re: Newsletter 68

Hello,

Very good idea with GPON.
But when will run full IGMP without that GPON does not operate to the fullest!
GPON without IGMP is unnecessary.

Regards.
Krzysztof Pawluk
http://www.pawluk.org
TV Poland
by krzysztof
Wed Jul 22, 2015 10:41 pm
Forum: General
Topic: IGMP Snooping
Replies: 134
Views: 81762

Re: IGMP Snooping

Hello How can I ask for? How long do I ask? Very many people have written about it. I am a regional provider of IPTV in Poland. Very quickly it needs IGMP Snooping in RouterOS (Switches). IGMP Proxy authentication does not work with TV tuners. I need a couple of thousands of such devices. When IGMP ...