Community discussions

Search found 119 matches

by gtj
Sun Mar 10, 2019 6:40 pm
Forum: RouterBOARD hardware
Topic: Sierra MC7455 solutions?
Replies: 4
Views: 760

Re: Sierra MC7455 solutions?

I haven't used the 7455 but I have used the 7354 and 7355 modules mounted either in USB adapters or directly mounted in NetMetal 5 radios or RB912 boards. Those older models though presented as PPP interfaces rather than LTE. Still they worked perfectly fine. On a whim, I cracked open a Wap-R and re...
by gtj
Fri Sep 01, 2017 4:23 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 124760

Re: v6.41rc [release candidate] is released! New bridge implementation!

I tried to upgrade a lab CRS-226-24P-2S+ from 6.40.1 to 6.41.rc18 and had major issues. The switch is set up as a simple dumb switch, no vlans except the default and all ports switched. After the upgrade I had no IP connectivity to the switch and no connectivity through the switch. The switch was em...
by gtj
Mon Jul 10, 2017 2:21 am
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36547

Re: RE: Re: v6.40rc [release candidate] is released! (New bridge implementation)

***WARNING*** Attempting to disable or delete a bridge port corresponding to a switched port will will render the device inaccessible!! Only a reboot will bring it back. Happens on my CCR1009 and CRS226's. What you mean for switched port Enviado de meu XT1580 usando Tapatalk A port that is connecte...
by gtj
Mon Jul 10, 2017 2:20 am
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36547

Re: RE: Re: v6.40rc [release candidate] is released! (New bridge implementation)

Hi @gtj Can you post your config? I have a 450g as router Crs 125 as layer 2 switch with vlan 2-8,99,210,220 using the switch menu But I can't figure out how to set up vlan on new config mode. As far as I can tell, there's no difference. You still use the switch menu to manage VLANs just as before.
by gtj
Mon Jul 10, 2017 2:17 am
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36547

Re: v6.40rc [release candidate] is released! (New bridge implementation)

***WARNING*** Attempting to disable or delete a bridge port corresponding to a switched port will will render the device inaccessible!! Only a reboot will bring it back. Happens on my CCR1009 and CRS226's.
by gtj
Sun Jul 09, 2017 6:50 pm
Forum: Announcements
Topic: v6.40rc [release candidate] is released! (New bridge implementation delayed till 6.41rc)
Replies: 207
Views: 36547

Re: v6.40rc [release candidate] is released! (New bridge implementation)

Tested upgrade (not new features) on... CCR1009, 2xCRS226, RB922UAGS-5HPacT, RB Metal 2SHPn, RB493G All went OK except for the 1st CRS226. That switch was configured as a dumb switch. No bridges, all ports switched, 2 VLANS with the mgmt IP address on one of the ports. not the master as it turns out...
by gtj
Fri May 12, 2017 3:52 pm
Forum: General
Topic: Which types of ports would you like to see for a high speed router
Replies: 168
Views: 26410

Re: Which types of ports would you like to see for a high speed router

12 x SFP+ (10G)
4 x QSFP (4x10G)
1 x Management (no PoE)
1 x serial management
by gtj
Sun Feb 12, 2017 5:50 pm
Forum: Announcements
Topic: v6.39rc [release candidate] is released
Replies: 391
Views: 83203

Re: v6.39rc [release candidate] is released

(the terminal button was already in the left menu) To be honest the left menu makes me NUTS because the items can be in different places even on 2 identical devices. Maybe it has something to do with the order packages are installed but IPv6 and PPP seem to be the biggest offenders. Sometimes IPv6 ...
by gtj
Sat Feb 11, 2017 8:30 pm
Forum: Announcements
Topic: v6.39rc [release candidate] is released
Replies: 391
Views: 83203

Re: v6.39rc [release candidate] is released

Whose ever idea it was to add a "Terminal" button to the top of the WebFig pages deserves a BIG PAY RAISE!
by gtj
Mon Oct 24, 2016 11:34 pm
Forum: Forwarding Protocols
Topic: HWMPPlus: Lost connectivity to most of network!
Replies: 3
Views: 1371

Re: HWMPPlus: Lost connectivity to most of network!

I've got almost similar problem:
http://forum.mikrotik.com/viewtopic.php ... 1c#p563997
Have you found a solution for yours?
Nope. I lost all hope for HWMPPlus.
by gtj
Tue Aug 02, 2016 2:24 pm
Forum: Scripting
Topic: Issue with API /interface/listen
Replies: 15
Views: 2231

Re: Issue with API /interface/listen

Got feedback from MikroTik Support... If interface state changed few times, message contains only 1 interface change. It is done to protect router from extensive writes and keep it from out of memory. We will consider adding some specific counter or similar, for most important events (like interface...
by gtj
Thu Jul 21, 2016 3:09 pm
Forum: Scripting
Topic: Issue with API /interface/listen
Replies: 15
Views: 2231

Re: Issue with API /interface/listen

New tests are in the queue and we will know more after testing. Here's one for you - I'm curious if the original issue is also a thing... That is, if you have a single connection, and use two channels (two ".tag" sets)  - one for the listen, and another one for the two modifications - do you still ...
by gtj
Wed Jul 20, 2016 3:19 pm
Forum: Scripting
Topic: Issue with API /interface/listen
Replies: 15
Views: 2231

Re: Issue with API /interface/listen

GTJ, I hope that you don't mind if I add some findings/logs.
Not at all, especially since you opened the issue in mikronode-ng. I referenced this thread in the support ticket I created so the more information the better.
by gtj
Tue Jul 19, 2016 3:07 pm
Forum: Scripting
Topic: Issue with API /interface/listen
Replies: 15
Views: 2231

Re: Issue with API /interface/listen

That confuses me more, as I don't think you mean "process" as in an actual OS "process"... I'm pretty sure it's not possible for two processes ("process" being the OS term...) to use the same TCP connection. Yes, 2 different OS processes. The listener process opens it's own connection to the device...
by gtj
Mon Jul 18, 2016 11:26 pm
Forum: Scripting
Topic: Issue with API /interface/listen
Replies: 15
Views: 2231

Re: Issue with API /interface/listen

Let me clarify... The /interface/listen` is being done in a separate process whose sole job is to print the events. In the other process, the second command is sent only when the first command returns the 'done'. If I put a sleep of 200ms between the 2 commands, i get 2 events. It's almost as though...
by gtj
Mon Jul 18, 2016 6:46 pm
Forum: Scripting
Topic: Issue with API /interface/listen
Replies: 15
Views: 2231

Re: Issue with API /interface/listen

Well, this isn't really a tags issue. Even if I issue the command on 2 different tags, I still only get 1 event from /interface/listen. Anyway, mikronode-ng serializes commands on the same channel(tag). The next command on the channel doesn't get sent until previous one gets a 'done'. If you want pa...
by gtj
Mon Jul 18, 2016 3:14 pm
Forum: Scripting
Topic: Issue with API /interface/listen
Replies: 15
Views: 2231

Issue with API /interface/listen

We're noticing an issue an issue where actions that are done in quick succession only generate 1 event with the last state of the interface. For example, issuing the following commands against a CCR-1009 using mikronode-ng actionChannel.write(['/interface/set','=disabled=yes','=.id=ether05']); // wa...
by gtj
Thu Mar 10, 2016 8:36 pm
Forum: General
Topic: how to enable GPS on MC7304
Replies: 13
Views: 3682

Re: how to enable GPS on MC7304

These are the Sierra Wireless MC73XX series Mini-PCIe cards. The most common are the MC7304 and the MC7354. The boards have 3 antenna connectors: MAIN: primary cellular antenna GPS: primary GPS antenna AUX: secondary cellular and secondary GPS The antenna frequency range specs are as follows. MAIN/C...
by gtj
Thu Mar 10, 2016 6:37 pm
Forum: General
Topic: how to enable GPS on MC7304
Replies: 13
Views: 3682

Re: how to enable GPS on MC7304

Thanks you very much! I think Mikrotik should save this post very important setting . Thanks a lot! to which output of the modem do I need to connect the antenna? GPS\AUX? because it's work when I connect to AUX as well? The spec for the MC7304 doesn't explicitly say but the spec for the MC7354 say...
by gtj
Wed Mar 09, 2016 9:34 pm
Forum: General
Topic: how to enable GPS on MC7304
Replies: 13
Views: 3682

Re: how to enable GPS on MC7304

The modem need the string "$GPS_START" to be sent on the NMEA port before it'll start sending messages.

For my MC7354 it's...

/sys gps set enabled=yes port=usb2 channel=1 init-string="\$GPS_START"
by gtj
Wed Mar 09, 2016 4:27 pm
Forum: General
Topic: how to enable GPS on MC7304
Replies: 13
Views: 3682

Re: how to enable GPS on MC7304

That's weird. I'm going to test mine this afternoon.
by gtj
Mon Mar 07, 2016 7:27 pm
Forum: General
Topic: how to enable GPS on MC7304
Replies: 13
Views: 3682

Re: how to enable GPS on MC7304

http://source.sierrawireless.com/resour ... reference/

You have to register but it's free. Chapter 7 has the GPS commands.
by gtj
Fri Jan 15, 2016 2:50 pm
Forum: General
Topic: Mikrotik UPS monitoring through usb
Replies: 12
Views: 3322

Re: Mikrotik UPS monitoring through usb

What brand and model of UPS are you using? Maybe it's just not recognized as an UPS by the kernel.
Anything in the log when you plug it in?
Do you have a Linux computer that you can plug the UPS into to see if it registers as a usbhid device?
by gtj
Thu Jan 14, 2016 6:27 pm
Forum: General
Topic: Mikrotik UPS monitoring through usb
Replies: 12
Views: 3322

Re: Mikrotik UPS monitoring through usb

Do you have the UPS package installed? You need that first.

Once that's installed, all you have to do is plug in the UPS.
Now go to system/ups and do an "Add New".
In the "Port" drop-down, you should see a "usbhid1" entry. That's your UPS.
by gtj
Tue Jan 05, 2016 7:28 pm
Forum: Beginner Basics
Topic: Extract and connect from ovpn.file certificate.
Replies: 2
Views: 1443

Re: Extract and connect from ovpn.file certificate.

TLS is not supported yet.
by gtj
Tue Jan 05, 2016 7:25 pm
Forum: General
Topic: rsa key support in ssh?
Replies: 15
Views: 14994

Re: rsa key support in ssh?

Exactly what puttygen commands are you running? It should be something like... ### generate the private key # puttygen -t rsa -b 2048 -O private-openssh -o mykey ++++++++++++++++++++++++ +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++...
by gtj
Wed Dec 30, 2015 4:58 pm
Forum: General
Topic: SSH stopped working on CCR1072
Replies: 5
Views: 822

Re: SSH stopped working on CCR1072

If you enabled strong encryption or regenerated the host keys, you may have to reboot.

Check the keys associated with the user.

What happens on the client side with 'ssh -v'?
by gtj
Sun Dec 27, 2015 12:51 am
Forum: Scripting
Topic: MIkroNode v1.0.0
Replies: 0
Views: 1700

MIkroNode v1.0.0

I've forked the original mikronode package and made a bunch of updates. I've been trying to get the updates merged into the original source but no luck so far so I've published it separately for now. I've done a ton of testing with my own network management backend stuff but I'm sure there are more ...
by gtj
Fri Dec 25, 2015 1:13 am
Forum: Scripting
Topic: API: Getting 2 !traps with only 1 !done
Replies: 2
Views: 760

Re: API: Getting 2 !traps with only 1 !done

Yeah, after I posted I thought "oh wait... the !done refers to the command, not the individual traps." I also just realized that if I send '/interface/vlan/prrrrrint', I only get 1 trap without a category. Anyway, I can handle it it just seems that if the menu fails, it should stop and not send anot...
by gtj
Thu Dec 24, 2015 11:34 pm
Forum: Scripting
Topic: API: Getting 2 !traps with only 1 !done
Replies: 2
Views: 760

API: Getting 2 !traps with only 1 !done

This can't be right... Send bad command... >>>/interface/an/print >>>.tag=1 !trap .tag=1 =category=0 =message=no such command or directory (an) !trap .tag=1 =message=no such command prefix !done .tag=1 2 !traps and only 1 !done? Ok maybe if there are really 2 errors but why 2 traps for the same erro...
by gtj
Wed Dec 23, 2015 4:54 pm
Forum: General
Topic: rsa key support in ssh?
Replies: 15
Views: 14994

Re: rsa key support in ssh?

Do you have strong crypto enabled?
/ip ssh set strong-crypto=yes
by gtj
Thu Dec 17, 2015 6:44 pm
Forum: General
Topic: ovpn-client issue
Replies: 2
Views: 573

Re: ovpn-client issue

You're not specifying a profile so you're getting the default which may not have encryption enabled. I'd create a specific profile for the connection. Also, udp, compression and tls aren't supported yet so if your server requires any of them, it won't work. Post your known working pc config file (wi...
by gtj
Tue Dec 15, 2015 12:19 am
Forum: Wireless Networking
Topic: Building inhouse access point (dual band) with NetMetal 5
Replies: 4
Views: 824

Re: Building inhouse access point (dual band) with NetMetal 5

If I can find that last ones I bought I'll post the part numbers but they were normal 3dbi RP-SMA sticks. Don't get dual-band ones. Get 3 tuned for 5GHz and 2 tuned for 2.4GHz.
by gtj
Mon Dec 14, 2015 7:01 pm
Forum: Wireless Networking
Topic: Building inhouse access point (dual band) with NetMetal 5
Replies: 4
Views: 824

Re: Building inhouse access point (dual band) with NetMetal 5

I use this setup as well in a bunch of places.

You need 3 5GHz and 2 2.4GHz antennas and don't forget the MMCX to RP-SMA pigtails for the R11e.
by gtj
Fri Dec 11, 2015 6:28 pm
Forum: General
Topic: Registering outside peer to Asterisk via nat mikrotik
Replies: 2
Views: 924

Re: Registering outside peer to Asterisk via nat mikrotik

nat rules get processed before filter rules. The filter rule "add chain=forward comment="SIP" dst-address=212.x.x.x dst-port=5060-5180 protocol=udp" will never match because by this time, the dst-address has already been changed to 192.168.1.198. Change the dst-address to 192.168.1.198 and it should...
by gtj
Wed Dec 09, 2015 9:37 pm
Forum: General
Topic: v6.33.3 [current] is released!
Replies: 59
Views: 18948

Re: v6.33.3 [current] is released!

Please write to support@mikrotik.com and send supout files which would be generated while there are "dead" SSH connections. I am not being able to reproduce this issue. I make multiple SSH sessions and break them without close. After few seconds they are closed and I do not see them any more under ...
by gtj
Mon Dec 07, 2015 5:47 pm
Forum: General
Topic: Remove Quick Set from the home page?
Replies: 23
Views: 2840

Re: Remove Quick Set from the home page?

Quick Set IS great for individual installs in a home or small office setting but for larger scale deployments not so much. For me, the issue is mostly that I make a lot of "advanced" setting changes via scripts/api and find Quick Set page distracting. With Quick Set disabled the Interfaces page come...
by gtj
Sun Dec 06, 2015 7:09 pm
Forum: General
Topic: Remove Quick Set from the home page?
Replies: 23
Views: 2840

Re: Remove Quick Set from the home page?

Also, the skin is just a json file: skins/default.json. You can modify that file and push it to all your devices.
by gtj
Sun Dec 06, 2015 6:57 pm
Forum: General
Topic: Remove Quick Set from the home page?
Replies: 23
Views: 2840

Re: Remove Quick Set from the home page?

You could just disable it in Design Skin.
by gtj
Wed Dec 02, 2015 8:29 pm
Forum: RouterBOARD hardware
Topic: RB750UP and USB power during reset
Replies: 5
Views: 1332

Re: RB750UP and USB power during reset

My apologies. You're absolutely correct. "ERROR: USB power reset not implemented on this hardware" I'm guessing that the reset not implemented and the fact that the power doesn't cycle on reboot are related. The USB power is probably coming directly from a voltage regulator fed directly by the PoE o...
by gtj
Wed Dec 02, 2015 4:08 am
Forum: RouterBOARD hardware
Topic: RB750UP and USB power during reset
Replies: 5
Views: 1332

Re: RB750UP and USB power during reset

Mine has it... [root@sw07] /system routerboard> pr routerboard: yes model: 750UP serial-number: 4C9904XXXXX firmware-type: ar7240 current-firmware: 3.17 upgrade-firmware: 3.24 [root@sw07] /system routerboard> settings usb export get print upgrade [root@sw07] /system routerboard> usb edit export get ...
by gtj
Mon Nov 30, 2015 8:09 pm
Forum: RouterBOARD hardware
Topic: RB750UP and USB power during reset
Replies: 5
Views: 1332

Re: RB750UP and USB power during reset

We had to write our own script to do this... We schedule it to run every minute. :global wdtimer :local count [ /ping count=5 address=some.ip.address interval=0.5s ] :if ( $count > 3 ) do={ :if ($wdtimer > 0) do={ /log info "WATCHDOG Recovered" } :set wdtimer 0 :return 0 } :set wdtimer ($wdtimer +1)...
by gtj
Sat Nov 28, 2015 5:58 pm
Forum: General
Topic: Dropping 'invalid' state connections or not?
Replies: 9
Views: 4536

Re: Dropping 'invalid' state connections or not?

My experience with iptables on bridged interfaces is limited but you may want to move the rule to one of the physical interfaces rather than the bridge.

Also, have you tried playing with "/int bridge settings set use-ip-firewall"?
by gtj
Thu Nov 26, 2015 6:02 pm
Forum: General
Topic: DUID for IPV6 Server needed
Replies: 11
Views: 11060

Re: DUID for IPV6 Server needed

Funny! I just opened a ticket on this same problem yesterday. :) JanisK was going to update the wiki to show that the "0x" prefix was needed.

Also be aware... The dhcp server for ipv6 can only do prefix delegation right now. It can't do statefull configuration.
by gtj
Fri Nov 13, 2015 7:04 pm
Forum: General
Topic: Issues with default config on Metal 9s
Replies: 2
Views: 503

Re: Issues with default config on Metal 9s

I think it was 6.30.2. Unfortunately, I was in a hurry to get these deployed and I was also deploying Metal 2s and Omnitiks (which didn't have the issue) so I forgot to note the version. Part of my setup scripts is upgrading to 6.32.3.
by gtj
Fri Nov 13, 2015 5:53 pm
Forum: General
Topic: Issues with default config on Metal 9s
Replies: 2
Views: 503

Issues with default config on Metal 9s

Anyone else having an issue with default config on the Metal 9 radios? I just bought a batch of 20 and all 20 were missing the default 192.168.88.1 ip address and a reset didn't help. For each one I had to ssh into the parent router and do a mac-telnet into it to set the default ip address so my set...
by gtj
Mon Nov 09, 2015 11:10 pm
Forum: Wireless Networking
Topic: Rx sensibility radio
Replies: 4
Views: 769

Re: Rx sensibility radio

You can try setting Noise Floor Theshold in advanced wireless settings..
by gtj
Thu Nov 05, 2015 6:15 pm
Forum: General
Topic: LTE Interface Hijacking my Default Route
Replies: 3
Views: 767

Re: LTE Interface Hijacking my Default Route

If the device is coming up as a ppp device, then yep, there's an option in the ppp config for adding the default route and another for adding dns entries.
by gtj
Thu Nov 05, 2015 6:09 pm
Forum: Announcements
Topic: v6.30.4 bugfix release
Replies: 104
Views: 26858

Re: v6.30.4 bugfix release

There seems to be a serious memory leak in this release that's triggered by viewing ip/firewall/connections in webfig. Once you bring up that page, available memory starts dropping and doesn't stop until you stop the www service. Exiting the browser alone doesn't help. It took my RB912 with 64mb me...
by gtj
Mon Nov 02, 2015 4:51 pm
Forum: RouterBOARD hardware
Topic: What ATT air cards are compatible?
Replies: 6
Views: 1301

Re: What ATT air cards are compatible?

2 of the NetMetal 5's, both BaseBoxes, both RB912s and the RB922 have mini-pcie slots with sim card support. I use them in the NetMetal and RB912 in the production network. The USB adapters I use mostly for flashing and testing but they do work in any device with a USB port as long as they have enou...
by gtj
Fri Oct 30, 2015 2:58 am
Forum: RouterBOARD hardware
Topic: What ATT air cards are compatible?
Replies: 6
Views: 1301

Re: What ATT air cards are compatible?

The only LTE solution for ATT is using a Sierra MC7354 Mini-PCIe card either directly in the Mikrotik devices that have Mini-PCIe slots or in a Mini-PCIe->USB Adapter. I do both. The advantage of the MC7354 is that you can flash it to another carrier's firmware if you need to. The AC340U definitely ...
by gtj
Tue Oct 27, 2015 8:10 pm
Forum: RouterBOARD hardware
Topic: United States 3G/4G USB Modem suppoort
Replies: 2
Views: 991

Re: United States 3G/4G USB Modem suppoort

The Verizon Novatel USB551L and the Verizon Pantech UML290VW both work. http://forum.mikrotik.com/viewtopic.php?f=3&t=97907 I'm trying to get the AT&T AirCard 340U to work now but no luck so far probably because it's stuck in MBIM mode. Beware with all USB modems... Devices like the RB2011 may not p...
by gtj
Fri Oct 23, 2015 9:31 pm
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD + R11e-2HPnD
Replies: 10
Views: 1500

Re: RB922UAGS-5HPacD + R11e-2HPnD

The max for the RB922 is 30V. Since the RB922 is listed at 17 watts (about 708 ma at 24v) and the R11e is 7 watts (about 291 ma at 24v), you need a minimum of 1 amp (with nothing to spare). If you're using a standalone power supply, make sure it's at least 1.5A If you're doing PoE from another devic...
by gtj
Fri Oct 23, 2015 6:20 pm
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD + R11e-2HPnD
Replies: 10
Views: 1500

Re: RB922UAGS-5HPacD + R11e-2HPnD

Actually, one thing to be aware of is input power. Make sure you're supplying enough to handle both radios.
by gtj
Fri Oct 23, 2015 5:19 pm
Forum: Wireless Networking
Topic: RB922UAGS-5HPacD + R11e-2HPnD
Replies: 10
Views: 1500

Re: RB922UAGS-5HPacD + R11e-2HPnD

I use the R11e cards in RB921UAGS NetMetal 5 devices and it's been working well. No issues.
by gtj
Tue Oct 20, 2015 5:25 pm
Forum: General
Topic: CenturyLink PPPoE
Replies: 18
Views: 3542

Re: CenturyLink PPPoE

Thanks for the replies. I am going to try the double NAT idea. As a temporary test I am going to configure the CenturyLink modem in its basic PPPoE with NAT configuration and 192.168.100.254 for the LAN side. I will assign the address of 192.168.100.253 to the WAN interface on the Mikrotik and set ...
by gtj
Fri Oct 16, 2015 9:48 pm
Forum: General
Topic: CenturyLink PPPoE
Replies: 18
Views: 3542

Re: CenturyLink PPPoE

I'm up in Golden so we're in the same legacy Qwest territory. 8.8.8.8 is anycasted and we both hit the same one, in Denver. You're not routed over the ipsec link by accident are you? The trace doesn't look like it but can you disable ipsec altogether as a test? I'm on a bonded VDSL with a Technicolo...
by gtj
Fri Oct 16, 2015 6:23 pm
Forum: General
Topic: CenturyLink PPPoE
Replies: 18
Views: 3542

Re: CenturyLink PPPoE

Very strange. I'm looking at my own config and it's about as simple as it gets. The ppp profile is set at all defaults right? Which market are you in? Which modem do you have? The ethernet port settings should be left at default except for master port. It must be set to none and no other port should...
by gtj
Thu Oct 15, 2015 6:57 pm
Forum: General
Topic: CenturyLink PPPoE
Replies: 18
Views: 3542

Re: CenturyLink PPPoE

The pppoe and physical ethernet ports aren't in a bridge by any chance are they? How about the internal switches? If you're using ether1 for the modem for instance, make sure that it's master-port is set to none and that none of the ports in that group (ports 2-5 and the spf port) have master-port s...
by gtj
Tue Oct 13, 2015 9:14 pm
Forum: RouterBOARD hardware
Topic: Pantech UML290 reset
Replies: 3
Views: 732

Re: Pantech UML290 reset

I just use a USB OTG Y cable. You can get them on Amazon for a few bucks. I also use a powered hub in one case where I needed a few extra usb serial ports.
by gtj
Tue Oct 13, 2015 2:33 am
Forum: RouterBOARD hardware
Topic: Pantech UML290 reset
Replies: 3
Views: 732

Re: Pantech UML290 reset

Yeah, power reset doesn't work but if you want them to be stable, supply them with external power. That did the trick for me with both the Pantech and Novatel modems. The RB2011 just doesn't supply enough current to power the modem reliably on it's own.
by gtj
Mon Oct 12, 2015 3:45 am
Forum: General
Topic: CenturyLink PPPoE
Replies: 18
Views: 3542

Re: CenturyLink PPPoE

Offhand, the thing that concerns me is "dial-on-demand=yes". Set it to no and see if that helps.
by gtj
Sun Oct 11, 2015 11:42 pm
Forum: General
Topic: CenturyLink PPPoE
Replies: 18
Views: 3542

Re: CenturyLink PPPoE

I use Mikrotik PPPoE with CenturyLink 60/30 vdsl service but have had no problem. The config is simple. /interface pppoe-client add add-default-route=yes default-route-distance=1 disabled=no interface=sfp1 keepalive-timeout=disabled \ max-mru=1492 max-mtu=1492 name=CenturyLink password=xxxxxxxxx use...
by gtj
Mon Oct 05, 2015 2:09 am
Forum: General
Topic: [Feature Request] Force WebFig to HTTPS
Replies: 4
Views: 1986

Re: [Feature Request] Force WebFig to HTTPS

Do you mean add an option to automatically redirect http -> https?
Otherwise you could just disable the www service. :)
by gtj
Sun Oct 04, 2015 1:10 am
Forum: Announcements
Topic: 6.32.2 released
Replies: 59
Views: 20123

Re: 6.32.2 released

I upgraded my Mikrotik RB951G-2HnD to 6.32.2 from 6.32.1 and now I cannot set my wireless to channel 11 frequency (2.462). Before I updated I was able to set my frequency to that channel. I am trying to setup multiple access points on my network, and I need the be able to have 1,6, and 11 for wirel...
by gtj
Wed Sep 23, 2015 3:48 am
Forum: RouterBOARD hardware
Topic: Compatibility Report: Sierra MC7354 Mini-pcie LTE
Replies: 35
Views: 8918

Re: Compatibility Report: Sierra MC7354 Mini-pcie LTE

I believe the NMEA output is on channel 1 and although I've been able to get a fix using the AT commands I've never been able to get it to stream anything.
by gtj
Mon Sep 21, 2015 10:08 pm
Forum: General
Topic: A newbie Question about Masquerade
Replies: 3
Views: 521

Re: A newbie Question about Masquerade

The other reason for specifying the out interface is that the masquerade processing uses the ip address of the out interface as the replacement source ip address. If you have a static wan ip address, you can save a miniscule amount of processing by using a src-nat rule and specifying the static ip a...
by gtj
Mon Sep 21, 2015 6:19 pm
Forum: General
Topic: Srce-nat 'masquerade' not catching all traffic?
Replies: 16
Views: 1616

Re: Srce-nat 'masquerade' not catching all traffic?

Do the logs show the packets being dropped?

Try moving the drops for invalid packets (both output and forward) after all your accepts.
by gtj
Mon Sep 21, 2015 12:37 am
Forum: General
Topic: Sprint USB Modem 341u
Replies: 3
Views: 796

Re: Sprint USB Modem 341u

You have to disable the ppp client interface before pressing Info.
by gtj
Sun Sep 20, 2015 11:17 pm
Forum: General
Topic: Sprint USB Modem 341u
Replies: 3
Views: 796

Re: Sprint USB Modem 341u

"Waiting for packets" means that you have "Dial on demand" set. Uncheck enabled and dial on demand, then apply. Now press the Info button and make sure you get valid info. You'll probably want to remove any default APN and use *99# as the dial string. Re-enable and you should get a connection. If no...
by gtj
Sun Sep 20, 2015 7:31 pm
Forum: General
Topic: NAT is not working randomly
Replies: 2
Views: 448

Re: NAT is not working randomly

It's probably "invalid" packets.

See this thread... http://forum.mikrotik.com/viewtopic.php?f=2&t=100394
by gtj
Thu Sep 17, 2015 12:06 am
Forum: RouterBOARD hardware
Topic: Compatibility Report: Sierra MC7354 Mini-pcie LTE
Replies: 35
Views: 8918

Re: Compatibility Report: Sierra MC7354 Mini-pcie LTE

Yeah, I've found Verizon a pain to work with but my customer has a national account with them. Their system restrictions make it very difficult to work with the card. Personally, I've had no problems with AT&T and this card. I think AT&T and T-Mobile, having GSM based networks, are more used to work...
by gtj
Tue Sep 15, 2015 6:31 pm
Forum: RouterBOARD hardware
Topic: Compatibility Report: Sierra MC7354 Mini-pcie LTE
Replies: 35
Views: 8918

Re: Compatibility Report: Sierra MC7354 Mini-pcie LTE

I'm using Laird MAF94300 antennas but these aren't really optimized for Verizon's LTE network which runs in the 700MHz band.

Taoglas TG.10.0113 or TG.30.8113 would probably be better.
by gtj
Mon Sep 14, 2015 12:49 am
Forum: General
Topic: Srce-nat 'masquerade' not catching all traffic?
Replies: 16
Views: 1616

Re: Srce-nat 'masquerade' not catching all traffic?

Start with 2 rules added to every device you have a NAT rule in... /ip firewall filter add action=drop chain=output connection-state=invalid log=yes log-prefix="out invalid" out-interface=<wan_interface> add action=drop chain=forward connection-state=invalid log=yes log-prefix="fwd invalid" out-inte...
by gtj
Sun Sep 13, 2015 2:26 am
Forum: Announcements
Topic: v6.30.4 bugfix release
Replies: 104
Views: 26858

Re: v6.30.4 bugfix release

There seems to be a serious memory leak in this release that's triggered by viewing ip/firewall/connections in webfig. Once you bring up that page, available memory starts dropping and doesn't stop until you stop the www service. Exiting the browser alone doesn't help. It took my RB912 with 64mb mem...
by gtj
Sat Sep 12, 2015 10:00 pm
Forum: General
Topic: Srce-nat 'masquerade' not catching all traffic?
Replies: 16
Views: 1616

Re: Srce-nat 'masquerade' not catching all traffic?

Just FYI... After testing this morning, here are the connection tracking parameters I settled on... [root@gw1.oaks] > /ip fire conn tracking pr ; /sys resource print enabled: auto tcp-syn-sent-timeout: 1m tcp-syn-received-timeout: 30s tcp-established-timeout: 1d tcp-fin-wait-timeout: 1m tcp-close-wa...
by gtj
Sat Sep 12, 2015 6:26 pm
Forum: General
Topic: Srce-nat 'masquerade' not catching all traffic?
Replies: 16
Views: 1616

Re: Srce-nat 'masquerade' not catching all traffic?

And what is the problem in that? Eating memory?
That and running out of space in the table. I wouldn't expect either to be an issue but it's just something to be aware of. In normal Linux, the default nf_conntrack_max is 64k but I don't see it in RouterOS anywhere.
by gtj
Sat Sep 12, 2015 6:11 pm
Forum: General
Topic: Srce-nat 'masquerade' not catching all traffic?
Replies: 16
Views: 1616

Re: Srce-nat 'masquerade' not catching all traffic?

Guessing.. Cpe & client hosts protocols timeouts are probably different, if coontrack kill a connection/stream because timeout and client think it's still open and speaks ..voilà an invalid packet is born Yep, that's my guess as well. I just haven't had time to investigate further. So? The 'drop in...
by gtj
Fri Sep 11, 2015 9:18 pm
Forum: Forwarding Protocols
Topic: freepbx / asterisk firewall and nat rules
Replies: 17
Views: 12392

Re: freepbx / asterisk firewall and nat rules

NAT + Asterisk = complete success IF you have patience and know how to set up both. I do it all the time.

The biggest trick is to turn olf any specific SIP helpers in the firewall.
by gtj
Fri Sep 11, 2015 9:14 pm
Forum: General
Topic: Srce-nat 'masquerade' not catching all traffic?
Replies: 16
Views: 1616

Re: Srce-nat 'masquerade' not catching all traffic?

I've had the exact same problem and it was caused by "invalid" packets. Since NAT relies on connection tracking, a packet that has an "invalid" connection state can't be natted and it gets passed through without modification. In my case, I think it's being caused by ACK and ACK,FIN packets being rec...
by gtj
Mon Aug 31, 2015 6:24 am
Forum: General
Topic: Is there a way to keep records of sites visited and bandwidth used for clients
Replies: 5
Views: 967

Re: Is there a way to keep records of sites visited and bandwidth used for clients

Look at /ip accounting.

It allows you to take snapshots of source address, dest address, packets and bytes.
by gtj
Fri Aug 28, 2015 8:26 am
Forum: General
Topic: Masquerade issue causing LTE flapping
Replies: 0
Views: 286

Masquerade issue causing LTE flapping

We've been having a serious issue getting a network to be stable. The network is composed of 16 Metal 9 APs, 15 Metal 2 APs, a PowerBOX as a central switch/router and a RB912UAG-2HPnD as the gateway/router. The WAN is a Verizon LTE USB stick in the RB912. During network testing, the WAN connection w...
by gtj
Mon Aug 24, 2015 12:22 am
Forum: Announcements
Topic: 6.31 released
Replies: 227
Views: 48111

Re: 6.31 released

It looks like although getting the script table via snmp is fixed, you can only get and set(run) the one with the highest index... [root@net-dfw1 snmp]# snmptable -v2c -Ci -c monitor 172.16.0.50 mtxrScriptTable SNMP table: MIKROTIK-MIB::mtxrScriptTable index mtxrScriptName mtxrScriptRunCmd 15 monito...
by gtj
Fri Aug 21, 2015 6:51 pm
Forum: General
Topic: Is /system upgrade supposed to work?
Replies: 6
Views: 653

Re: Is /system upgrade supposed to work?

Ok, I think I have it partially figured out. "/system upgrade" apparently needs the winbox service on the host router which I routinely disable. After enabling it, I can download packages. So what does "mirror" do?
by gtj
Thu Aug 20, 2015 9:15 pm
Forum: Wireless Networking
Topic: 900 Setup
Replies: 5
Views: 912

Re: 900 Setup

I think I bought out the US stock :)

I got mine at Streakwave
http://www.streakwave.com/Itemdesc.asp? ... l9HPn&o1=0
Out of stock but they've got 100 on order.

Roc-Noc usually has them as well but they're also out of stock.
https://www.roc-noc.com/mikrotik/router ... l9HPn.html
by gtj
Thu Aug 20, 2015 6:56 pm
Forum: General
Topic: Is /system upgrade supposed to work?
Replies: 6
Views: 653

Re: Is /system upgrade supposed to work?

Why not? It is a old feature where you can add a router as a package source; http://wiki.mikrotik.com/wiki/Manual:Upgrading_RouterOS#RouterOS_auto-upgrade Not sure I follow. The link doesn't mention anything about "/system upgrade" just "/system package upgrade". Are you saying that if you add a mi...
by gtj
Thu Aug 20, 2015 2:44 am
Forum: General
Topic: Is /system upgrade supposed to work?
Replies: 6
Views: 653

Is /system upgrade supposed to work?

I can't find any documentation on it and I can't get it to do anything. Basically I need to create my own mirror for updates.
by gtj
Wed Aug 19, 2015 7:32 pm
Forum: Wireless Networking
Topic: 900 Setup
Replies: 5
Views: 912

Re: 900 Setup

Mikrotik only has 1 900MHz ap... The Metal 9. We just used 16 of them for a mesh in a large apartment complex where all the buildings are stucco with metal lathe (a problem for 2.4GHz and a nightmare for 5GHz) and they worked well. We paired each with a Metal 2 for the clients to connect to and use ...
by gtj
Tue Aug 18, 2015 3:48 am
Forum: RouterBOARD hardware
Topic: Compatibility Report: Sierra MC7354 Mini-pcie LTE
Replies: 35
Views: 8918

Re: Compatibility Report: Sierra MC7354 Mini-pcie LTE

Hello can we get some feedback how this MC7354 is working in latest 6.31rc ? it should have ppp-out interface. but you need to set in right mode using at command. Enable passqord protected command: AT!ENTERCND="A710" Query status: AT!UDUSBCOMP? Query list: AT!UDUSBCOMP=? Set mode (default 8 change ...
by gtj
Mon Aug 17, 2015 7:36 pm
Forum: General
Topic: Best 4G (and 3G) USB Modem for Mikrotik RouterBoard. (RB2011U)
Replies: 3
Views: 1629

Re: Best 4G (and 3G) USB Modem for Mikrotik RouterBoard. (RB2011U)

I went through the same process with the RB2011 and USB Modems. The problem was that the RB2011s weren't putting out enough current to power any of the modems reliably. Although using a USB hub or USB power inserter worked, the ultimate solution was to not use the RB2011. Instead I'm using the RB750...
by gtj
Tue Aug 11, 2015 6:05 am
Forum: RouterBOARD hardware
Topic: Compatibility Report: Sierra MC7354 Mini-pcie LTE
Replies: 35
Views: 8918

Re: Compatibility Report: Sierra MC7354 Mini-pcie LTE

Not sure about the $5/mo plan but the Novatel USB551 (was $14 on amazon. not sure now) can be activated on an existing share plan for the $10/month. You can then take the sim card and use it with the MC7354. They both take mini sims. I've done this a few times now. The device-sim pairing only matter...
by gtj
Sun Aug 09, 2015 6:35 pm
Forum: RouterBOARD hardware
Topic: Compatibility Report: Sierra MC7354 Mini-pcie LTE
Replies: 35
Views: 8918

Re: Compatibility Report: Sierra MC7354 Mini-pcie LTE

Yay! That's good news.
by gtj
Tue Aug 04, 2015 1:42 am
Forum: RouterBOARD hardware
Topic: PowerBOX RB750Pr2 USB?
Replies: 0
Views: 984

PowerBOX RB750Pr2 USB?

I'm going to need USB for a LTE modem for a deployment and seeing that the RB750UP and the PowerBOX have the same form factor I popped open the PowerBOX to see if it has a USB connector inside. The board is stencilled for a USB A connector and there are traces to it. Does it just need a connector so...
by gtj
Mon Aug 03, 2015 6:47 am
Forum: RouterBOARD hardware
Topic: Compatibility Report: Sierra MC7354 Mini-pcie LTE
Replies: 35
Views: 8918

Re: Compatibility Report: Sierra MC7354 Mini-pcie LTE

Can't help any more then. I know it works on Verizon and AT&T but I don't have a T-Mo account to test with, sorry.
by gtj
Mon Aug 03, 2015 3:05 am
Forum: RouterBOARD hardware
Topic: Compatibility Report: Sierra MC7354 Mini-pcie LTE
Replies: 35
Views: 8918

Re: Compatibility Report: Sierra MC7354 Mini-pcie LTE

When you say you added the default route, did you do that manually or did you check the ppp box? My connection adds 2 routes... one to 10.x.x.x with a source of my 100.x.x.x address via ppp-out1 and another route to 0.0.0.0/0 via the 10.x.x.x address. Also, did you set up a srcnat/masquerade rule fo...
by gtj
Mon Aug 03, 2015 1:38 am
Forum: RouterBOARD hardware
Topic: Compatibility Report: Sierra MC7354 Mini-pcie LTE
Replies: 35
Views: 8918

Re: Compatibility Report: Sierra MC7354 Mini-pcie LTE

Are you saying you actually can't pass traffic? Don't be put off by the "bogus" address and lack of remote. That's what I get with Verizon only the address is in the 100.0.0.0 block. Check the "Add default route" box on the PPP connection and try it.
by gtj
Sun Jul 26, 2015 4:47 am
Forum: Forwarding Protocols
Topic: HWMPPlus: Lost connectivity to most of network!
Replies: 3
Views: 1371

HWMPPlus: Lost connectivity to most of network!

I'm about to totally give up on HWMPPlus. :evil: Here's the situation... Mix of NetMetal5, RB750UP, Metal9 and Metal2 devices all at 6.30.1. NetMetal5 --- RB750UP --- Metal9-1 -<WDS> - Metal9-2 --- Metal2 -- clients. Metal9-3 --- Metal2 -- clients ... Metal9-n The NetMetal5 is the gateway and is mar...
by gtj
Thu Jul 23, 2015 4:42 pm
Forum: Forwarding Protocols
Topic: HWMPPlus Include client facing AP in mesh?
Replies: 0
Views: 530

HWMPPlus Include client facing AP in mesh?

My network is pretty close to the classic scenario shown in various wiki articles and presentations... A mesh of Metal 9 radios in dynamic-wds mode providing the backbone with a Metal 2 attached via ethernet cable to each Metal 9 to provide client access. The clients themselves are dumb 802.11 devic...
by gtj
Wed Jul 22, 2015 6:25 pm
Forum: RouterBOARD hardware
Topic: Compatibility Report: Sierra MC7354 Mini-pcie LTE
Replies: 35
Views: 8918

Re: Compatibility Report: Sierra MC7354 Mini-pcie LTE

I can test in a NetMetal 5 later this week.
by gtj
Fri Jul 17, 2015 3:15 am
Forum: Wireless Networking
Topic: SNMP Traps and dynamic WDS
Replies: 0
Views: 324

SNMP Traps and dynamic WDS

There aren't any. :) My goal is to create a visualization that shows who's connected to whom in a 15-20 node dynamic mesh but even with all interfaces being monitored there are no traps when dynamic-wds links come and go. Should there be? I can poll the registration table for each node from teh mana...
by gtj
Sat Jul 11, 2015 4:13 am
Forum: RouterBOARD hardware
Topic: Compatibility Report: Sierra MC7354 Mini-pcie LTE
Replies: 35
Views: 8918

Re: Compatibility Report: Sierra MC7354 Mini-pcie LTE

If only the SIM is activated, then it will only work with LTE. :(
Ah, I hadn't thought of that.
by gtj
Sat Jul 11, 2015 2:57 am
Forum: RouterBOARD hardware
Topic: Compatibility Report: Sierra MC7354 Mini-pcie LTE
Replies: 35
Views: 8918

Re: Compatibility Report: Sierra MC7354 Mini-pcie LTE

The only way to change the firmware is to put it in a computer that has a mini-pcie slot (a laptop perhaps) and use either Windows or Linux to flash the firmware. Windows is easier <sigh>. I had to compile the Sierra SDK for Linux. You *may* be able to leave the Telus firmware and manually enter the...
by gtj
Sat Jul 11, 2015 12:33 am
Forum: Wireless Networking
Topic: Metal 2shpn w/ 6dBi omni antenna indoor optimization
Replies: 9
Views: 2394

Re: Metal 2shpn w/ 6dBi omni antenna indoor optimization

A few other general rules to consider... Antenna gain is reciprocal meaning you also get the gain advantage on the receiving side if the client is in the antenna's coverage area. This can help you capture weaker clients. It's sometimes better to lower the power output and use a higher gain antenna o...
by gtj
Mon Jul 06, 2015 5:32 pm
Forum: General
Topic: bricked RB Metal 5SHPn's
Replies: 4
Views: 957

Re: bricked RB Metal 5SHPn's

I've had a similar issue on Metal2's and Metal9's after a config reset via the button. More often than not, the device comes back up without it's default config. I've had to mac-telnet in and manually set the ip address.
by gtj
Tue Jun 30, 2015 5:13 pm
Forum: RouterBOARD hardware
Topic: Compatibility Report: Sierra MC7354 Mini-pcie LTE
Replies: 35
Views: 8918

Re: Compatibility Report: Sierra MC7354 Mini-pcie LTE

I'm using them on both Verizon and AT&T. This version is in stock for $160. It has the AT&T firmware but can be flashed with the Verizon FW. http://www.richardsonrfpd.com/Pages/Product-Details.aspx?productId=1119313 This version is backordered and also $160. It has the Verizon firmware but can be fl...
by gtj
Thu Jun 25, 2015 5:25 pm
Forum: RouterBOARD hardware
Topic: Compatibility Report: Sierra MC7354 Mini-pcie LTE
Replies: 35
Views: 8918

Re: Compatibility Report: Sierra MC7354 Mini-pcie LTE

The MC77xx cards are marked as obsolete and out of stock by my suppliers which is why I went with the MC7354. I've got 3 now and they've been perfectly stable. I'm about to order 20 more.
by gtj
Tue Jun 23, 2015 1:13 am
Forum: RouterBOARD hardware
Topic: Compatibility Report: Verizon/Novatel USB551L and Verizon/Pantech UML290VW
Replies: 0
Views: 899

Compatibility Report: Verizon/Novatel USB551L and Verizon/Pantech UML290VW

Tested with 6.29.1 on RB2011 and NetMetal5 Set ppp interface to info channel: 0 data channel: 0 profile: default clear out user, pin, apn, etc phone: *99***3# uncheck dial-on-demand Comes up, then drops for a second, then comes up for good. RB2011 note: The USB OTG port doesn't provide enough power ...
by gtj
Fri Jun 19, 2015 12:58 am
Forum: General
Topic: Configure OpenVPN client
Replies: 8
Views: 48520

Re: Configure OpenVPN client

Assuming you're using Webfig... Gather your ca cert file and your pem file containing your client cert and key. I'll refer to them as ca.crt and client.pem but they can be named anything. Connect to the device using Webfig and go to Files. Upload both the ca.crt and client.pem files. Go to System/Ce...
by gtj
Thu Jun 18, 2015 3:51 am
Forum: RouterBOARD hardware
Topic: Compatibility Report: Sierra MC7354 Mini-pcie LTE
Replies: 35
Views: 8918

Compatibility Report: Sierra MC7354 Mini-pcie LTE

ROS version: 6.29.1 Hardware: NetMetal5 922UAGS-5HPacT You have to split the case and remove the board completely to get the sim installed and of course you have to drill out the aux antenna ports. Be careful though, there are 4 phillips screws holding the board in at the corners PLUS 1 tiny phillip...
by gtj
Thu Jun 18, 2015 3:33 am
Forum: RouterBOARD hardware
Topic: RB2011 USB current available?
Replies: 1
Views: 606

RB2011 USB current available?

Anyone know how much current the USB OTG port can supply? When I plug my Verizon/Novatel USB551L modem in, the usb interface keeps going up and down. If I plug a powered hub into the RB2011 then plug the modem into the hub, it works fine.
by gtj
Thu Jun 18, 2015 3:15 am
Forum: General
Topic: Configure OpenVPN client
Replies: 8
Views: 48520

Re: Configure OpenVPN client

Hi, If I remember correctly, MT doesn't support certificate authentication only user/ password Check: http://wiki.mikrotik.com/wiki/Manual:Interface/OVPN Depends on whether MT is the client or server. If it's the client it'll support certificate auth just fine. Import the ca cert and the client cer...
by gtj
Wed Jun 10, 2015 3:40 am
Forum: RouterBOARD hardware
Topic: NetMetal 5 SIM card access
Replies: 1
Views: 693

NetMetal 5 SIM card access

Does the board REALLY have to be completely removed (4 screws + rp-sma connectors unscrewed) for sim card access or am I just missing something stupid? I just found the packet containing the mini-pcie hold down screws after 20 minutes of cursing that they weren't included so at least I figured that ...
by gtj
Wed Jun 03, 2015 6:03 pm
Forum: Wireless Networking
Topic: Issues with defining and using channels
Replies: 6
Views: 2250

Re: Issues with defining and using channels

Ok, I understand now. Thanks!
by gtj
Wed Jun 03, 2015 7:56 am
Forum: Wireless Networking
Topic: Issues with defining and using channels
Replies: 6
Views: 2250

Re: Issues with defining and using channels

I'm sorry, I must be missing something.

Ce is by definition a 40MHz channel with the Control channel being in the lower 20MHz and the extension channel in the upper 20MHz. Are you saying we shouldn't use the Width field in channels? Or does Width mean the width of the Control channel?
by gtj
Tue Jun 02, 2015 4:05 pm
Forum: Wireless Networking
Topic: Issues with defining and using channels
Replies: 6
Views: 2250

Re: Issues with defining and using channels

That's just it... There's nothing advanced about a channel with a center frequency of 5180, a bandwidth of 40MHz and an extension channel of Ce. That a standard 'N' channel. I can set that in the interface just fine: Flags: X - disabled, R - running 0 name="wlan2" mtu=1500 mac-address=4C:5E:0C:12:80...
by gtj
Mon Jun 01, 2015 11:29 pm
Forum: Wireless Networking
Topic: Issues with defining and using channels
Replies: 6
Views: 2250

Issues with defining and using channels

Intel ATOM board with a R11e-5HacD card running 6.29.1 L4... If edit the wlan interface and configure 5GHz-A/N, 20/40MHz - Ce, and 5180, it's accepted just fine. If I create a channel named 38Ce with the exact same settings and select it in the Frequency dropdown of the interface, I get "unsupported...
by gtj
Tue May 12, 2015 3:03 am
Forum: RouterBOARD hardware
Topic: PoE Injector directionality
Replies: 3
Views: 679

Re: PoE Injector directionality

Yeah, I think we'll use the OmniTIKs with the PoE out option if we have to go this route.
by gtj
Fri May 08, 2015 7:51 pm
Forum: RouterBOARD hardware
Topic: PoE Injector directionality
Replies: 3
Views: 679

PoE Injector directionality

Do the PoE injectors supply power on both directions? I may need to do a back-to-back AP scenario and would prefer to power both APs from 1 injector/power supply.