Community discussions

MikroTik App

Search found 40 matches

by colin
Sun Mar 15, 2020 12:04 pm
Forum: RouterBOARD hardware
Topic: The usb otg cable for android phone can be used for ccr1009?
Replies: 2
Views: 1911

The usb otg cable for android phone can be used for ccr1009?

Hi guys, i bought a used ccr1009-8g-1s-1s+ router(no usb otg cable), and it seems work fine except the usb port. I connect a usb disk to the router via a usb otg cable which was used for the android phone, but i can't see the usb port in the winbox under the system->ports menu, and the disk doesn't ...
by colin
Sat Nov 30, 2019 9:59 am
Forum: Virtualization
Topic: Mikrotik CHR speed performance problem
Replies: 28
Views: 11788

Re: Mikrotik CHR speed performance problem

Pirlet , FYI - I assume you are running a Mikrotik CHR (64-Bit ROS). Heads up - I don't think you need the "SCSI controller 0" in your configuration. If I am correct , the CHR does not even have SCSI drivers and the virtual CHR hard disk is actually IDE. By removing the SCSI controller , you free u...
by colin
Sat Nov 30, 2019 8:53 am
Forum: Beginner Basics
Topic: high management cpu load when enable kid control
Replies: 1
Views: 456

high management cpu load when enable kid control

after enable kid control: enable-kidcontrol.png after disable kid control: disable-kidcontrol.png None of the other settings were changed. So it's the bug about kid control? Tried many times(disable kid control to see the cpu load then enable kid control to see the cpu again) and got the same result...
by colin
Thu Nov 21, 2019 4:39 am
Forum: Beginner Basics
Topic: mangle rule can't catch all packets
Replies: 0
Views: 460

mangle rule can't catch all packets

For the rules: add action=mark-connection chain=prerouting new-connection-mark=conn1 passthrough=no src-address=192.168.2.4 add action=log chain=prerouting connection-mark=conn1 src-address=192.168.2.4 add action=log chain=prerouting log=yes src-address=192.168.2.4 I found that the packets count of ...
by colin
Tue Oct 15, 2019 11:22 am
Forum: Scripting
Topic: dynamic=no doesn't work in /ip route
Replies: 4
Views: 1751

Re: dynamic=no doesn't work in /ip route

Works with find too:
[admin@p3_450] /ip route> :put [find  where !dynamic]      
*2;*1
[admin@p3_450] /ip route> :put [find  where !static]        
*401691fd
Sorry, my fault. It works.
by colin
Tue Oct 15, 2019 5:58 am
Forum: Scripting
Topic: dynamic=no doesn't work in /ip route
Replies: 4
Views: 1751

Re: dynamic=no doesn't work in /ip route

When route is not dynamic then "dynamic" parameter is not set wich is not equal to "no" Correct way is [admin@p3_450] /ip route> print where dynamic Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohib...
by colin
Mon Oct 14, 2019 6:27 pm
Forum: Scripting
Topic: dynamic=no doesn't work in /ip route
Replies: 4
Views: 1751

dynamic=no doesn't work in /ip route

Hi, i find that the follow commands get different results: /ip route :put [:len [find static=yes]] =>44 :put [:len [find dynamic=no]] =>0 :put [:len [find dynamic !=yes]] =>44 but in /ip firewall nat they have same results: /ip firewall nat :put [:len [find dynamic=no]] =>55 :put [:len [find dynamic...
by colin
Mon Sep 30, 2019 4:10 am
Forum: General
Topic: RouterOS v7.0beta1 (ARM)
Replies: 203
Views: 53747

Re: RouterOS v7.0beta1 (ARM)

looks like beta2 is out: https://forum.mikrotik.com/viewtopic.php?f=1&t=152003#p752103 Changes in v7beta2 capsman - improved compatibility between v6 and v7 versions; tr069-client - address support of server CA certificates; winbox - re-added OSPF menu; ppp - fixed "add-default-route" parameter for...
by colin
Sun Sep 22, 2019 7:44 am
Forum: General
Topic: RouterOS v7.0beta1 (ARM)
Replies: 203
Views: 53747

Re: RouterOS v7.0beta1 (ARM)

Even if it's not perfect, we'd love to start testing BGP/MPLS on ARM/Tilera!
And CHR also, please!!
CHR +1
by colin
Fri Sep 06, 2019 6:35 pm
Forum: General
Topic: RouterOS v7.0beta1 (ARM)
Replies: 203
Views: 53747

Re: RouterOS v7.0beta1 (ARM)

finally we saw the beta version of v7, and hope the full ipv6 support will be implemented.
by colin
Wed May 15, 2019 3:15 am
Forum: General
Topic: [SOLVED] UPnP seems not working with PPPoE
Replies: 10
Views: 5161

Re: [SOLVED] UPnP seems not working with PPPoE

Some times if i disable upnp, and reenable it, the upnp will still keep disabled(you can check the tcp port 2828 by tcping, it was closed.). After disable it and reenable again and again, it still disabled, then i find your solution and try it, and it worked again. So thanks to your solution. But mo...
by colin
Tue Apr 23, 2019 7:34 pm
Forum: Announcements
Topic: v6.44.2 [stable] is released!
Replies: 67
Views: 18773

Re: v6.44.2 [stable] is released!

After update to 6.44.2(CHR), i found that the port of 2828(upnp related port) will be closed when you restart ros, even the upnp settings still show as enabled. To enable it, i need to disable upnp then reenable it many times. And if restart ros, the port will be closed again. Any one else has the s...
by colin
Tue Jan 22, 2019 4:46 pm
Forum: General
Topic: [Feature Request] :resolve DNS Client Improvements
Replies: 8
Views: 2523

Re: [Feature Request] :resolve DNS Client Improvements

Oh good question @colin, I don’t know of a way. Perhaps adding :resolve server=8.8.8.8 might be handy.
Yes, the resolve command has the server parameter, but it seems that ip firewall address-list always resolve the domain address list by the default dns server.
by colin
Mon Jan 21, 2019 7:13 pm
Forum: General
Topic: [Feature Request] :resolve DNS Client Improvements
Replies: 8
Views: 2523

Re: [Feature Request] :resolve DNS Client Improvements

I fully support your proposals to enhance the DNS resolver.

And i think use the address list to get all of the address for a domain is a good idea, but if i want to resolve the domain by different dns server, how to do it?

So i think the best answer is to enhance the DNS resolver, i think.
by colin
Fri Dec 21, 2018 4:27 am
Forum: Beginner Basics
Topic: vrrp with mtu
Replies: 4
Views: 936

vrrp with mtu

Does anyone know how to change mtu of vrrp interface? The default value is 1500, and i change it to 1512 or 1480, but the actual mtu is still 1500 And it seems that it no effect to pppoe interface which created base on vrrp, for example: eth1 mtu:1500 vrrp1 mtu:1460 pppoe1 mtu:1480 pppoe1 can connec...
by colin
Sun Nov 11, 2018 7:14 am
Forum: Beginner Basics
Topic: The winbox is hard to use
Replies: 12
Views: 1743

Re: The winbox is hard to use

I have my Winbox windows pre-defined in my session preferences, so every new session opens with my preferred windows open in exactly the same place and dimensions each time. If a window ends up behind another, I don't go looking for it in the right-hand pane. I navigate to it through the menu again...
by colin
Sun Nov 11, 2018 6:53 am
Forum: Beginner Basics
Topic: The winbox is hard to use
Replies: 12
Views: 1743

Re: The winbox is hard to use

Winbox is a classic MDI application, you can use CTRL-F6 and CTRL-SHIFT-F6 to cycle through child windows, forth and back respectively.
Thank you. This hot key is helpful.
by colin
Fri Nov 09, 2018 6:44 pm
Forum: Beginner Basics
Topic: The winbox is hard to use
Replies: 12
Views: 1743

Re: The winbox is hard to use

Hi guys, i want to know how do you use winbox, because i think it's really hard to use. For example: 1.can't move the sub window out of the main window. 2.can't minimal the sub window. So when opening many sub windows, it's hard to find the window which you want. Anyone else has good idea to operat...
by colin
Thu Nov 08, 2018 3:47 pm
Forum: Beginner Basics
Topic: The winbox is hard to use
Replies: 12
Views: 1743

The winbox is hard to use

Hi guys, i want to know how do you use winbox, because i think it's really hard to use. For example: 1.can't move the sub window out of the main window. 2.can't minimal the sub window. So when opening many sub windows, it's hard to find the window which you want. Anyone else has good idea to operate...
by colin
Mon Oct 29, 2018 4:21 pm
Forum: Beginner Basics
Topic: same ip for multi interfaces
Replies: 4
Views: 1085

Re: same ip for multi interfaces

First of all thanks to all of the reply. Case1: Yesterday i tried to bridge the two interfaces then filter them in bridge filters,(just like what @BartoszP and @vecernik87 said), and it worked. Thank you. Case2: I found that it can be achieved by Bridge VLAN Filtering and physical vlan switch(see:ht...
by colin
Sun Oct 28, 2018 6:02 am
Forum: Beginner Basics
Topic: same ip for multi interfaces
Replies: 4
Views: 1085

same ip for multi interfaces

Hello, I wan't to know is it possible to use the one ip for ros and accessed by different interface. Case1: 1.1 the router has two interface called lan1 and lan2. 1.2 the lan1 and lan2 have the same network of 192.168.2.0/24 1.3 the router take the ip of 192.168.2.1/24 1.4 lan1 and lan2 should not a...
by colin
Fri Oct 26, 2018 9:29 pm
Forum: General
Topic: v6 RC and v7 BETA
Replies: 126
Views: 29617

Re: v6 RC and v7 BETA

Hope we will get the v7 beta version in 2018...
by colin
Wed Oct 10, 2018 3:49 am
Forum: General
Topic: dhcp6 client always is requesting,can't get ipv6 prefix...
Replies: 2
Views: 833

Re: dhcp6 client always is requesting,can't get ipv6 prefix...

Do you confirm that the isp provide the ipv6?
And make sure that
1."use ipv6" is yes in the pppoe profile.
2.only prefix is checked in the dhcpv6 client
by colin
Wed Oct 10, 2018 3:21 am
Forum: General
Topic: v6.38.1: Last Link Up/Down Time 2035
Replies: 3
Views: 2051

Re: v6.38.1: Last Link Up/Down Time 2035

I noticed this also. I tried to disable the pppoe client interface then reenable it, it use it's own time and ignore the system time.

CHR 4.43.2
by colin
Fri Sep 28, 2018 6:10 pm
Forum: General
Topic: Ipv6 & dns cache & script enviroment
Replies: 4
Views: 1318

Re: Ipv6 & dns cache & script enviroment

Thank you so much for the search for me.
It seems that not fixed even in 6.43.2
by colin
Thu Sep 27, 2018 7:28 pm
Forum: General
Topic: Ipv6 & dns cache & script enviroment
Replies: 4
Views: 1318

Re: Ipv6 & dns cache & script enviroment

@Sob Thank you for your reply.
by colin
Wed Sep 26, 2018 6:57 pm
Forum: General
Topic: Ipv6 & dns cache & script enviroment
Replies: 4
Views: 1318

Ipv6 & dns cache & script enviroment

1. These days i found that my isp enable ipv6 support. So i setup ipv6 in ros and it worked well. But after that i found that in the dns cache table, some strange content were cached.for example: dns2.PNG dns1.PNG And I confirm that they appear after i setup ipv6. Is it normal? BTW, there's more and...
by colin
Wed Sep 26, 2018 6:39 pm
Forum: General
Topic: Feature Request: IPv6 NAT support
Replies: 8
Views: 3815

Re: Feature Request: IPv6 NAT support

+1. very very need it, and routing mark
by colin
Mon Apr 02, 2018 5:39 pm
Forum: Scripting
Topic: Can't change Global variable with API
Replies: 19
Views: 2820

Re: Can't change Global variable with API

still have the same problem in ros 6.41.2, hope it will be fixed in the next release.
by colin
Fri Mar 16, 2018 7:30 pm
Forum: General
Topic: Iis it possible to capture the vlan interface's pppoe packets in bridge nat rule
Replies: 0
Views: 505

Iis it possible to capture the vlan interface's pppoe packets in bridge nat rule

for example: /interface bridge add name=wan /interface vlan add interface=wan name=vlan100 vlan-id=100 /interface bridge port add bridge=wan interface=ether2 /interface pppoe-client add name=pppoe-out1 user=test password=test interface=vlan100 /interface bridge nat add action=log chain=srcnat disabl...
by colin
Sun Mar 11, 2018 12:04 pm
Forum: Scripting
Topic: local variable of array act like a global variable
Replies: 1
Views: 471

local variable of array act like a global variable

1. The local variable which type is array, sometime it act like a global variable, for example: :local testArr {1;2;3} :log info "step1:testArr[0]=$($testArr->0)" :set ($testArr->0) 11 :log info "step2:testArr[0]=$($testArr->0)" when execute it for the first time, the output was: step1:testArr[0]=1 ...
by colin
Mon Feb 26, 2018 7:57 am
Forum: Scripting
Topic: the condition of for loop
Replies: 0
Views: 463

the condition of for loop

for the script:

:for i from=0 to=-1 step=1 do={
:log info $i
}

it will output
-1
0

But the expect result is output nothing.

Is it a bug or normal result?
by colin
Tue Jul 26, 2016 4:58 am
Forum: Announcements
Topic: v6.36 [current] is released!
Replies: 183
Views: 47897

Re: v6.36 [current] is released!

The changelog of: *) upnp - fixed nat rule dst-port by making it visible again;

It seems that the dst-port still unvisible.
by colin
Sat Jul 23, 2016 7:45 pm
Forum: General
Topic: Queue Tree(Global) with src-nat
Replies: 0
Views: 768

Queue Tree(Global) with src-nat

We know that one different of  Global-Out and Interface HTB is that In case of SRC-NAT (masquerade) Global-Out will be aware of private client addresses, but Interface HTB will not in v5.  But in v6, both the global and interface htb are all after the src-nat(see http://forum.mikrotik.com/viewtopic....
by colin
Tue Mar 01, 2016 4:14 am
Forum: General
Topic: Feature request: Force sending of DHCP options to clients
Replies: 33
Views: 9596

Re: Feature request: Force sending of DHCP options to clients

+10000

I need this feature too
by colin
Wed Aug 26, 2015 10:16 am
Forum: General
Topic: v6.31 support vmware scsi disk?
Replies: 2
Views: 1524

Re: v6.31 support vmware scsi disk?

Thank you for reply.
retest it with the chr version, the same result.
by colin
Mon Aug 24, 2015 12:52 pm
Forum: General
Topic: v6.31 support vmware scsi disk?
Replies: 2
Views: 1524

v6.31 support vmware scsi disk?

What's new in 6.31 (2015-Aug-14 15:42): ...... *) demo mode of Cloud Hosted Router (CHR) added *) chr - added x86_64 image for use in virtual environments *) chr - added support for VMware SCSI virtual disks *) chr - added support for VMware vmxnet3 network card It seems that v6.31 had support the v...
by colin
Mon May 11, 2015 11:26 am
Forum: General
Topic: Problem Intel I350 t4
Replies: 10
Views: 3765

Re: Problem Intel I350 t4

sorry for invoice but we will have driver implemented only in v7 beta that will be released soon
Can it be implemented in v6.29 etc... or what is the exactly v7 beta release date...