Community discussions

Search found 27 matches

by wombat
Thu Mar 21, 2019 8:58 pm
Forum: General
Topic: Route needed with L2TP VPN
Replies: 4
Views: 2575

Re: Route needed with L2TP VPN

Hello, Since 6.44+, the L2TP ipsec function has collapsed in a strange way On the main router (L2TP server) range 10.xxx/24 several static routes - from the main router goes ping everywhere but from the client do not get to eg 10.x.1.254, eventually 10.x.16.1 I feel that the problem makes 1,254, the...
by wombat
Wed Sep 20, 2017 5:21 pm
Forum: General
Topic: Static route PPTP downtime
Replies: 10
Views: 989

Re: Static route PPTP downtime

there is same as post in console..
by wombat
Wed Sep 20, 2017 2:13 pm
Forum: General
Topic: Static route PPTP downtime
Replies: 10
Views: 989

Re: Static route PPTP downtime

Server /ppp profile set *0 change-tcp-mss=default dns-server=10.75.5.1 use-encryption=required set *FFFFFFFE change-tcp-mss=default local-address=10.75.4.1 remote-address=vpn \ use-upnp=yes Client /ppp profile set *0 change-tcp-mss=default use-encryption=required set *FFFFFFFE local-address=10.75.17...
by wombat
Tue Sep 19, 2017 11:22 pm
Forum: General
Topic: Static route PPTP downtime
Replies: 10
Views: 989

Re: Static route PPTP downtime

Hi,

any idea? I still have to set up a route manually several times a day :-(
by wombat
Thu Sep 14, 2017 10:04 am
Forum: General
Topic: Static route PPTP downtime
Replies: 10
Views: 989

Re: Static route PPTP downtime

/ip route print Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S 0.0.0.0/0 1 1 ADC 10.75.1.0/24 10.75.1.1 bridge1 0 2 ADC 10.75.2.0/24 10.75.2.1 brid...
by wombat
Wed Sep 13, 2017 1:33 pm
Forum: General
Topic: Static route PPTP downtime
Replies: 10
Views: 989

Static route PPTP downtime

Hi,

I have static route via PPTP and at every downtime/restart this route has cancel and is need manual make it.. :/ Any to create "static" route which resist these problems?

Thank you.
by wombat
Tue Jul 18, 2017 2:01 pm
Forum: General
Topic: Capsman interface RX/TX interface
Replies: 1
Views: 358

Capsman interface RX/TX interface

Hi,

How can I see traffic on the registered capsman intefaces .. There is still only 0 :-(

Image

Regards!
by wombat
Fri May 12, 2017 10:54 pm
Forum: General
Topic: Public-Mikrotik-Bandwidth-Test-Server(s)
Replies: 561
Views: 397760

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Ok, i have default firewall. When i disable drop rule. So it works good. Have I bad firewall rules?
by wombat
Fri May 12, 2017 7:18 pm
Forum: General
Topic: Public-Mikrotik-Bandwidth-Test-Server(s)
Replies: 561
Views: 397760

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Hi,

Why doesn't work only UDP receive direction? All the time only "0 bps" with Both or TCP no problem.
Image
by wombat
Tue May 09, 2017 11:08 am
Forum: General
Topic: "Slow" download RB3011
Replies: 6
Views: 974

"Slow" download RB3011

Hello, I have a 100 Mbit line from my ISP when I checking speed via MK and the integrated bandwidth test so all OK but when I download something from net via Chrome I never get more than 10.5 MB/s which is about 80 Mbit+ , I don't understand where 20 Mbit is lost to me. Whole my LAN is built on 1 Gb...
by wombat
Fri Oct 07, 2016 12:14 pm
Forum: General
Topic: DHCP issue
Replies: 0
Views: 286

DHCP issue

Hi, from upgrade to 6.37(.1) i have problem with one device and DHCP still warning message: 11:05:49 dhcp,warning dhcp1 offering lease 10.20.1.101 for 00:40:AD:82:07:EA without success and debug.. 11:10:54 dhcp,debug,packet dhcp1 received discover with id 3620392020 from 0.0.0.0 11:10:54 dhcp,debug,...
by wombat
Mon Oct 03, 2016 2:31 pm
Forum: General
Topic: L2TP client firewall rules
Replies: 6
Views: 808

Re: L2TP client firewall rules

Ok, now it good. Thank you. Perfect ;-)
by wombat
Mon Oct 03, 2016 2:01 pm
Forum: General
Topic: L2TP client firewall rules
Replies: 6
Views: 808

Re: L2TP client firewall rules

[admin@MK] > /interface bridge port print Flags: X - disabled, I - inactive, D - dynamic # INTERFACE BRIDGE PRIORITY PATH-COST HORIZON 0 I ether4/STUL_Z bridge1 0x80 10 none 1 I ether5/POSTEL_Z bridge1 0x80 10 none 2 ether6/VOIP bridge1 0x80 10 none 3 I sfp1 bridge1 0x80 10 none 4 wlan1 bridge1 0x8...
by wombat
Mon Oct 03, 2016 1:24 pm
Forum: General
Topic: L2TP client firewall rules
Replies: 6
Views: 808

Re: L2TP client firewall rules

[admin@MK] > /interface ethernet print Flags: X - disabled, R - running, S - slave # NAME MTU MAC-ADDRESS ARP MASTER-PORT SWITCH 0 R ether1 1500 00:0C:42:FD:0F:E1 enabled none switch1 1 RS ether2/PC_Z 1500 00:0C:42:FD:0F:E2 enabled none switch1 2 RS ether3/NAS 1500 00:0C:42:FD:0F:E3 enabled none sw...
by wombat
Mon Oct 03, 2016 12:57 pm
Forum: General
Topic: L2TP client firewall rules
Replies: 6
Views: 808

L2TP client firewall rules

Hi,

I have L2TP tunnel with my two objects.. It works "good" But in first object I have IPTV (IGMP proxy) and when I watch TV so to tunnel go unnecessary traffic.. How can I filter it via firewall?

Thank you.
by wombat
Fri Apr 22, 2016 12:22 pm
Forum: Announcements
Topic: v6.36rc [release candidate] is released, wireless-fp package is discontinued!
Replies: 295
Views: 64184

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

Hi,

on RB2011 is 6.36 RC it is only view from put above unit for see problems. On RB2011 with 6.36 i can't login at the moment only netinstall is way ..
by wombat
Fri Mar 04, 2016 5:22 pm
Forum: Beginner Basics
Topic: VLAN setup
Replies: 0
Views: 462

VLAN setup

Hello, I have SXT point separate VLAN follows: http://i.imgur.com/496ZvqF.png in essence, it works only me "matters" that the neighbors are not identified in the bridge-local IP under a blank, which does not belong there, so it's OK, or it goes to tweak? It has to be totally in a bridge, which, but ...
by wombat
Tue Feb 09, 2016 11:43 am
Forum: Beginner Basics
Topic: More subnet in the LAN and L2TP
Replies: 4
Views: 699

Re: More subnet in the LAN and L2TP

1) without VPN C:\Users\>tracert 192.168.2.2 Tracing route to NAS [192.168.2.2] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms router [192.168.1.1] 2 <1 ms <1 ms <1 ms NAS [192.168.2.2] 2) with VPN C:\Users\>tracert 192.168.2.2 Tracing route to 192.168.2.2 over a maximum of 30 hops 1 5 ms 6 ms 8 ms ...
by wombat
Mon Feb 08, 2016 9:32 pm
Forum: Beginner Basics
Topic: More subnet in the LAN and L2TP
Replies: 4
Views: 699

Re: More subnet in the LAN and L2TP

vpn pool is 10.x.1.xx/24
by wombat
Mon Feb 08, 2016 7:05 pm
Forum: Beginner Basics
Topic: More subnet in the LAN and L2TP
Replies: 4
Views: 699

More subnet in the LAN and L2TP

Hi, situation: My LAN: 192.168.0.1/24 192.168.1.1/24 / Me 192.168.2.1/24 / NAS etc. I have attached remote drives on the NAS, etc. On the 2.x, everything works, at the moment when you connect to the remote L2TP so it falls, because the subnet is routing over the VPN, not via the LAN, how to say MK t...
by wombat
Mon Nov 16, 2015 4:22 pm
Forum: Announcements
Topic: Tik App, MikroTik android utility ALPHA test
Replies: 419
Views: 139880

Re: Tik App, MikroTik android utility ALPHA test

Hi!

How can I do upgrade / equivalenf System/Packages/Check for update/Upgrade?

I have the latest build.

?

Thank you.
Gabriel
by wombat
Wed Jul 15, 2015 10:24 am
Forum: Announcements
Topic: 6.30 released
Replies: 180
Views: 41762

Re: 6.30 released

for example log: 05:06:19 ipsec,debug no policy found: CLIENTIP/32[0] ROUTERIP/32[0] proto=udp dir=in 05:06:19 ipsec,debug no policy found: ROUTERIP/32[0] CLIENTIP/32[0] proto=udp dir=out 05:17:14 ipsec,debug no policy found: CLIENTIP/32[0] ROUTERIP/32[0] proto=udp dir=in 05:17:14 ipsec,debug no pol...
by wombat
Wed Jul 15, 2015 10:20 am
Forum: Announcements
Topic: 6.30 released
Replies: 180
Views: 41762

Re: 6.30 released

Enabled it .. But doesn't work.
by wombat
Wed Jul 15, 2015 10:15 am
Forum: Announcements
Topic: 6.30 released
Replies: 180
Views: 41762

Re: 6.30 released

Hello, I have (had) I was working configuration L2TP / IPSec (MK / clients) for any reason after UPG v6.30 stopped working on connecting mobile clients via Android but Windows works normally. Google did not help anything. I tried a lot of variations according to the log, but not much, including conf...
by wombat
Mon May 18, 2015 9:27 pm
Forum: RouterOS v6 RC and v7 BETA
Topic: CAPsMAN v2 ready for testing
Replies: 201
Views: 101020

Re: CAPsMAN v2 ready for testing

Hi!

Where can I get package of CAPsMan v2 for 6.29 (RC20)? in all_files is not there..

Thank you.
by wombat
Thu May 14, 2015 10:22 pm
Forum: General
Topic: Bridge mode in LAN problem
Replies: 1
Views: 810

Bridge mode in LAN problem

Hello, I have a major in LAN router as RB2011UiAS-2HnD-IN and 2pc RB951G 2HnD -in bridge mode (WISP AP) AP as well as used as a switch to another network segment. The first bridge works without problems, but the second set identically wants to route, or it can ping. Anything that'll put into port 2 ...