Ok, but how is it possible that with hap lite, old wireless package, identical SSID settings, the device connects immediately? BTW on hAP ac3 with wifiwave2 on which Xiaomi does not work (disconnects) many other devices run without problems.
The Xiaomi device cannot connect via Wifiwave2, it only cycles connected and after 2s disconnected. i have hAP ac3 If I connect via the old hAP lite, everything works immediately. /interface/wifiwave2/actual-configuration> print 0 name="wifi1" mac-address=08:55:31 arp-timeout=auto radio-ma...
Hello, Since 6.44+, the L2TP ipsec function has collapsed in a strange way On the main router (L2TP server) range 10.xxx/24 several static routes - from the main router goes ping everywhere but from the client do not get to eg 10.x.1.254, eventually 10.x.16.1 I feel that the problem makes 1,254, the...
Server /ppp profile set *0 change-tcp-mss=default dns-server=10.75.5.1 use-encryption=required set *FFFFFFFE change-tcp-mss=default local-address=10.75.4.1 remote-address=vpn \ use-upnp=yes Client /ppp profile set *0 change-tcp-mss=default use-encryption=required set *FFFFFFFE local-address=10.75.17...
/ip route print Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S 0.0.0.0/0 1 1 ADC 10.75.1.0/24 10.75.1.1 bridge1 0 2 ADC 10.75.2.0/24 10.75.2.1 brid...
I have static route via PPTP and at every downtime/restart this route has cancel and is need manual make it.. :/ Any to create "static" route which resist these problems?
Hello, I have a 100 Mbit line from my ISP when I checking speed via MK and the integrated bandwidth test so all OK but when I download something from net via Chrome I never get more than 10.5 MB/s which is about 80 Mbit+ , I don't understand where 20 Mbit is lost to me. Whole my LAN is built on 1 Gb...
Hi, from upgrade to 6.37(.1) i have problem with one device and DHCP still warning message: 11:05:49 dhcp,warning dhcp1 offering lease 10.20.1.101 for 00:40:AD:82:07:EA without success and debug.. 11:10:54 dhcp,debug,packet dhcp1 received discover with id 3620392020 from 0.0.0.0 11:10:54 dhcp,debug,...
I have L2TP tunnel with my two objects.. It works "good" But in first object I have IPTV (IGMP proxy) and when I watch TV so to tunnel go unnecessary traffic.. How can I filter it via firewall?
Hello, I have SXT point separate VLAN follows: http://i.imgur.com/496ZvqF.png in essence, it works only me "matters" that the neighbors are not identified in the bridge-local IP under a blank, which does not belong there, so it's OK, or it goes to tweak? It has to be totally in a bridge, w...
1) without VPN C:\Users\>tracert 192.168.2.2 Tracing route to NAS [192.168.2.2] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms router [192.168.1.1] 2 <1 ms <1 ms <1 ms NAS [192.168.2.2] 2) with VPN C:\Users\>tracert 192.168.2.2 Tracing route to 192.168.2.2 over a maximum of 30 hops 1 5 ms 6 ms 8 ms ...
Hi, situation: My LAN: 192.168.0.1/24 192.168.1.1/24 / Me 192.168.2.1/24 / NAS etc. I have attached remote drives on the NAS, etc. On the 2.x, everything works, at the moment when you connect to the remote L2TP so it falls, because the subnet is routing over the VPN, not via the LAN, how to say MK t...
Hello, I have (had) I was working configuration L2TP / IPSec (MK / clients) for any reason after UPG v6.30 stopped working on connecting mobile clients via Android but Windows works normally. Google did not help anything. I tried a lot of variations according to the log, but not much, including conf...
Hello, I have a major in LAN router as RB2011UiAS-2HnD-IN and 2pc RB951G 2HnD -in bridge mode (WISP AP) AP as well as used as a switch to another network segment. The first bridge works without problems, but the second set identically wants to route, or it can ping. Anything that'll put into port 2 ...