MikroTik

wombat

Ok, but how is it possible that with hap lite, old wireless package, identical SSID settings, the device connects immediately? BTW on hAP ac3 with wifiwave2 on which Xiaomi does not work (disconnects) many other devices run without problems.

wombat

The Xiaomi device cannot connect via Wifiwave2, it only cycles connected and after 2s disconnected. i have hAP ac3 If I connect via the old hAP lite, everything works immediately. /interface/wifiwave2/actual-configuration> print 0 name="wifi1" mac-address=08:55:31 arp-timeout=auto radio-ma...

wombat

Just to be sure...you have upgraded both packages?

yes, packages and firmware too

wombat

WPA3 on hAP AC3 stopped working after update from 7.4 - there is no error info in log.

7.5rc1 still same issue, With 7.4.1 all works fine.

wombat

WPA3 on 2.4GHz hAP AC3 stopped working after update from 7.4 - there is no error info in log.

7.5beta11 still same issue, With 7.4.1 all works fine.

wombat

Hello, Since 6.44+, the L2TP ipsec function has collapsed in a strange way On the main router (L2TP server) range 10.xxx/24 several static routes - from the main router goes ping everywhere but from the client do not get to eg 10.x.1.254, eventually 10.x.16.1 I feel that the problem makes 1,254, the...

wombat

there is same as post in console..

wombat

Server /ppp profile set *0 change-tcp-mss=default dns-server=10.75.5.1 use-encryption=required set *FFFFFFFE change-tcp-mss=default local-address=10.75.4.1 remote-address=vpn \ use-upnp=yes Client /ppp profile set *0 change-tcp-mss=default use-encryption=required set *FFFFFFFE local-address=10.75.17...

wombat

Hi,

any idea? I still have to set up a route manually several times a day

wombat

/ip route print Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, B - blackhole, U - unreachable, P - prohibit # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S 0.0.0.0/0 1 1 ADC 10.75.1.0/24 10.75.1.1 bridge1 0 2 ADC 10.75.2.0/24 10.75.2.1 brid...

wombat

Hi,

I have static route via PPTP and at every downtime/restart this route has cancel and is need manual make it.. :/ Any to create "static" route which resist these problems?

Thank you.

wombat

Hi,

How can I see traffic on the registered capsman intefaces .. There is still only 0

Regards!

wombat

Ok, i have default firewall. When i disable drop rule. So it works good. Have I bad firewall rules?

wombat

Hi,

Why doesn't work only UDP receive direction? All the time only "0 bps" with Both or TCP no problem.

wombat

Hello, I have a 100 Mbit line from my ISP when I checking speed via MK and the integrated bandwidth test so all OK but when I download something from net via Chrome I never get more than 10.5 MB/s which is about 80 Mbit+ , I don't understand where 20 Mbit is lost to me. Whole my LAN is built on 1 Gb...

wombat

Hi, from upgrade to 6.37(.1) i have problem with one device and DHCP still warning message: 11:05:49 dhcp,warning dhcp1 offering lease 10.20.1.101 for 00:40:AD:82:07:EA without success and debug.. 11:10:54 dhcp,debug,packet dhcp1 received discover with id 3620392020 from 0.0.0.0 11:10:54 dhcp,debug,...

wombat

Ok, now it good. Thank you. Perfect

wombat

[admin@MK] > /interface bridge port print Flags: X - disabled, I - inactive, D - dynamic # INTERFACE BRIDGE PRIORITY PATH-COST HORIZON 0 I ether4/STUL_Z bridge1 0x80 10 none 1 I ether5/POSTEL_Z bridge1 0x80 10 none 2 ether6/VOIP bridge1 0x80 10 none 3 I sfp1 bridge1 0x80 10 none 4 wlan1 bridge1 0x8...

wombat

[admin@MK] > /interface ethernet print Flags: X - disabled, R - running, S - slave # NAME MTU MAC-ADDRESS ARP MASTER-PORT SWITCH 0 R ether1 1500 00:0C:42:FD:0F:E1 enabled none switch1 1 RS ether2/PC_Z 1500 00:0C:42:FD:0F:E2 enabled none switch1 2 RS ether3/NAS 1500 00:0C:42:FD:0F:E3 enabled none sw...

wombat

Hi,

I have L2TP tunnel with my two objects.. It works "good" But in first object I have IPTV (IGMP proxy) and when I watch TV so to tunnel go unnecessary traffic.. How can I filter it via firewall?

Thank you.

wombat

Hi,

on RB2011 is 6.36 RC it is only view from put above unit for see problems. On RB2011 with 6.36 i can't login at the moment only netinstall is way ..

wombat

After upgrade the latest RC, RB 2011UiAS-2HnD

wombat

Hello, I have SXT point separate VLAN follows: http://i.imgur.com/496ZvqF.png in essence, it works only me "matters" that the neighbors are not identified in the bridge-local IP under a blank, which does not belong there, so it's OK, or it goes to tweak? It has to be totally in a bridge, w...

wombat

1) without VPN C:\Users\>tracert 192.168.2.2 Tracing route to NAS [192.168.2.2] over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms router [192.168.1.1] 2 <1 ms <1 ms <1 ms NAS [192.168.2.2] 2) with VPN C:\Users\>tracert 192.168.2.2 Tracing route to 192.168.2.2 over a maximum of 30 hops 1 5 ms 6 ms 8 ms ...

wombat

vpn pool is 10.x.1.xx/24

wombat

Hi, situation: My LAN: 192.168.0.1/24 192.168.1.1/24 / Me 192.168.2.1/24 / NAS etc. I have attached remote drives on the NAS, etc. On the 2.x, everything works, at the moment when you connect to the remote L2TP so it falls, because the subnet is routing over the VPN, not via the LAN, how to say MK t...

wombat

Hi!

How can I do upgrade / equivalenf System/Packages/Check for update/Upgrade?

I have the latest build.

?

Thank you.
Gabriel

wombat

for example log: 05:06:19 ipsec,debug no policy found: CLIENTIP/32[0] ROUTERIP/32[0] proto=udp dir=in 05:06:19 ipsec,debug no policy found: ROUTERIP/32[0] CLIENTIP/32[0] proto=udp dir=out 05:17:14 ipsec,debug no policy found: CLIENTIP/32[0] ROUTERIP/32[0] proto=udp dir=in 05:17:14 ipsec,debug no pol...

wombat

Enabled it .. But doesn't work.

wombat

Hello, I have (had) I was working configuration L2TP / IPSec (MK / clients) for any reason after UPG v6.30 stopped working on connecting mobile clients via Android but Windows works normally. Google did not help anything. I tried a lot of variations according to the log, but not much, including conf...

wombat

Hi!

Where can I get package of CAPsMan v2 for 6.29 (RC20)? in all_files is not there..

Thank you.

wombat

Hello, I have a major in LAN router as RB2011UiAS-2HnD-IN and 2pc RB951G 2HnD -in bridge mode (WISP AP) AP as well as used as a switch to another network segment. The first bridge works without problems, but the second set identically wants to route, or it can ping. Anything that'll put into port 2 ...

Search found 32 matches

Re: v7.6beta [testing] is released!

Re: v7.6beta [testing] is released!

Re: v7.5rc is released!

Re: v7.5rc is released!

Re: v7.5beta [testing] is released!

Re: Route needed with L2TP VPN

Re: Static route PPTP downtime

Re: Static route PPTP downtime

Re: Static route PPTP downtime

Re: Static route PPTP downtime

Static route PPTP downtime

Capsman interface RX/TX interface

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

"Slow" download RB3011

DHCP issue

Re: L2TP client firewall rules

Re: L2TP client firewall rules

Re: L2TP client firewall rules

L2TP client firewall rules

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

Re: v6.36rc [release candidate] is released, wireless-fp package is discontinued!

VLAN setup

Re: More subnet in the LAN and L2TP

Re: More subnet in the LAN and L2TP

More subnet in the LAN and L2TP

Re: Tik App, MikroTik android utility ALPHA test

Re: 6.30 released

Re: 6.30 released

Re: 6.30 released

Re: CAPsMAN v2 ready for testing

Bridge mode in LAN problem