Community discussions

MikroTik App

Search found 152 matches

by josu
Wed Sep 13, 2017 1:50 am
Forum: Wireless Networking
Topic: DSCP and WMM in wireless p2p
Replies: 0
Views: 476

DSCP and WMM in wireless p2p

Hello, I have a wireless link with 802.11 and WMM enabled devices. I have a voip server that mark the packet with CS5, I check with Torch in all my network devices and there are marked with DSCP 40 the packet I want to priorize in the wireless link. My wireless link and configured in bridfge station...
by josu
Fri May 19, 2017 3:42 pm
Forum: Wireless Networking
Topic: Add 2 APs to RB3011
Replies: 2
Views: 598

Re: Add 2 APs to RB3011

Thanks!

Will roaming work?

Kind regards.
by josu
Fri May 19, 2017 9:53 am
Forum: Wireless Networking
Topic: Add 2 APs to RB3011
Replies: 2
Views: 598

Add 2 APs to RB3011

Hello, I actually have a RB3011 to manage the network at home. I have a OpenWRT device as AP but it doesn't work very well, it has bad signal. I want to add 2 Mikrotik APs to cover all rooms. My questions: 1. Is it possible to manage both APs from the RB3011? 2. Is it possible to get real roaming fo...
by josu
Sun Apr 09, 2017 9:17 pm
Forum: General
Topic: Rare peaks in RouterOS graphs
Replies: 11
Views: 1662

Re: Rare peaks in RouterOS graphs

How do you take this values? SNMP?

You need to check the stored values, hiw do you graph it?

Regards.
by josu
Thu Feb 23, 2017 12:25 pm
Forum: Wireless Networking
Topic: The difference between mikrotiks AP
Replies: 10
Views: 2286

Re: The difference between mikrotiks AP

Hello,

I have same scenario. One RB3011 to manage the LAN and actually have 2 OpenWRT APs to cover all home locations.

The problem is that the roaming is not working. Will RB APs do roaming?

Has RB3011 wireless controller feature?

Kind regards.
by josu
Fri Feb 10, 2017 1:26 pm
Forum: Wireless Networking
Topic: 802.11 vs. Nstreme vs. Nv2 for P-to-P
Replies: 11
Views: 13461

802.11 vs. Nstreme vs. Nv2 for P-to-P

Hello, I have a point-to-point link between 2 SXT devices for a 500m distance. Actually a leave default values for the protocol, so I am using 802.11. I read lots about Nstream and Nv2, but I want to know your experience for point to point links. Is there any real performance using this propietary p...
by josu
Sun Feb 05, 2017 11:29 pm
Forum: General
Topic: USB not recognizing UPS connected to it
Replies: 3
Views: 1220

Re: USB not recognizing UPS connected to it

Hello,

Are Salicru UPS working in Mikrotik?

Regards.
by josu
Tue Jan 31, 2017 6:07 pm
Forum: RouterBOARD hardware
Topic: RB3011 desktop enclosure
Replies: 3
Views: 1020

Re: RB3011 desktop enclosure

I recall having one early production RB3011 in my hands at a MUM in the same RB2011 desktop enclosure (-2HnD version) ... but finally only -RM version went into production...

Captura de pantalla 2017-01-31 a la(s) 13.09.14.png
Thanks!

So there will not desktop versión?

:(

Regards.
by josu
Tue Jan 31, 2017 1:15 pm
Forum: RouterBOARD hardware
Topic: RB3011 desktop enclosure
Replies: 3
Views: 1020

RB3011 desktop enclosure

Hello,

I have a RB3011 rack model and it is a perfect router for my needs.

But I need a smaller versión and with wifi router. Are you going to make desktop enclosure version? It will be great.

Kind regards.
by josu
Thu Jan 26, 2017 10:57 pm
Forum: Wireless Networking
Topic: Priorize voip traffic in point-to-point wireless link
Replies: 12
Views: 3318

Re: Priorize voip traffic in point-to-point wireless link

Maybe you can separate the VoIP traffic with VLAN's, and mark it there (use your own DHCP scope for it)
Thanks, but I can not do that, there are more services in the server.

Regards.
by josu
Wed Jan 25, 2017 4:21 pm
Forum: Wireless Networking
Topic: Priorize voip traffic in point-to-point wireless link
Replies: 12
Views: 3318

Re: Priorize voip traffic in point-to-point wireless link

This presentation in english from Lutz Kleemann will help you guys. http://mum.mikrotik.com/presentations/US13/lutz.pdf Thanks Gustavo! This PDF is really great. I have a VoIP server that mark all stream traffic with DSCP (48). I want to use Layer 2 priorization with "/interface bridge filter". The...
by josu
Wed Jan 25, 2017 2:03 pm
Forum: General
Topic: ip firewall mangle vs. interface bridge filter
Replies: 2
Views: 1049

Re: ip firewall mangle vs. interface bridge filter

In wireless comunications is very important use Layer 2 priority. You can see this post: http://forum.mikrotik.com/viewtopic.php?t=117225 Hello Gustavo, I created the post above. This is why I create this one. I read about 2 different ways to priorize, layer2 and layer3. So I will do it with layer2...
by josu
Wed Jan 25, 2017 12:44 pm
Forum: General
Topic: ip firewall mangle vs. interface bridge filter
Replies: 2
Views: 1049

ip firewall mangle vs. interface bridge filter

Hello, I have point-to-point wireless link in brigde mode. I need to set-priority for some DSCP marked packets (they come marked from VoIP server). Which is the best way to priorize? Layer 2: /interface bridge filter: Here I have less options for DSCP, I could priorize with ingress priority Layer 3:...
by josu
Tue Jan 24, 2017 11:20 am
Forum: Wireless Networking
Topic: Priorize voip traffic in point-to-point wireless link
Replies: 12
Views: 3318

Re: Priorize voip traffic in point-to-point wireless link

Josu. Remenber you have to put in advance mode your interface, if you are in simple mode it doesn't appear. Thanks Gustavo! I enabled the WMM in both APs I have configured the marking this way: /ip firewall mangle add action=mark-packet chain=prerouting dscp=48 \ new-packet-mark=voice-stream passth...
by josu
Tue Jan 24, 2017 9:54 am
Forum: Wireless Networking
Topic: Fasttrack in SXT point-to-point
Replies: 5
Views: 1080

Re: Fasttrack in SXT point-to-point

Hello,

I disabled the fasttrack, the problema is that firewall filter and mangle rules are still there. Is there any way to delete?

Kind regards.
by josu
Mon Jan 23, 2017 2:18 pm
Forum: Wireless Networking
Topic: WMM vs. Nv2-qos
Replies: 1
Views: 843

WMM vs. Nv2-qos

Hello, I have a point-to-point wireless link between 2 SXT devices. I need to apply QoS to priorize real-time traffic (VoIP). I read about QoS over the air and I search 2 different methods: WMM: http://wiki.mikrotik.com/wiki/Manual:WMM Nv2-qos: http://wiki.mikrotik.com/wiki/Manual:Nv2#QoS_in_Nv2_net...
by josu
Mon Jan 23, 2017 1:55 pm
Forum: Wireless Networking
Topic: Fasttrack in SXT point-to-point
Replies: 5
Views: 1080

Re: Fasttrack in SXT point-to-point

In that case you NEED to disable Fasttrack!
OK.

I go to IP -> Settings, and I can not disable Fasttrack, it is in grey color.

How could I disable it?

Best regards.
by josu
Mon Jan 23, 2017 12:45 pm
Forum: Wireless Networking
Topic: Fasttrack in SXT point-to-point
Replies: 5
Views: 1080

Re: Fasttrack in SXT point-to-point

When you operate the SXT in bridge mode and you have not enabled IP firewall on the bridge there is very little the ip firewall is doing and it does not matter if fasttrack is on or off. You can disable it in IP->Settings. Thanks! I have activaed the IP firewall in the bridge because I need to mark...
by josu
Mon Jan 23, 2017 12:13 pm
Forum: Wireless Networking
Topic: Priorize voip traffic in point-to-point wireless link
Replies: 12
Views: 3318

Re: Priorize voip traffic in point-to-point wireless link

Hi. My advice you should read and see this video He is a trainer from Italy and explain very well QoS on air, all your questions will be answer. https://youtu.be/DyyQVfuZD4M http://mum.mikrotik.com/presentations/ES16/presentation_3957_1475217199.pdf Regards. Tanks Gustavo! I read the PDF, I will se...
by josu
Mon Jan 23, 2017 10:44 am
Forum: RouterBOARD hardware
Topic: Firmware version
Replies: 12
Views: 2161

Re: Firmware version

Great!

I want to have both SXT with same firmware versions.

Regards.
by josu
Sun Jan 22, 2017 10:10 pm
Forum: Wireless Networking
Topic: Fasttrack in SXT point-to-point
Replies: 5
Views: 1080

Fasttrack in SXT point-to-point

Hello, I have 2 SXT to join 2 LAN in "brigde" and "station brigde" configuration. I have bridged wlan1 and ether1 interfaces and have just one IP in each devices. In one of the AP I have Fasttrack activated (I don't remenber how I did it). In IP -> Firewall section I have this different configuratio...
by josu
Sun Jan 22, 2017 6:19 pm
Forum: RouterBOARD hardware
Topic: Firmware version
Replies: 12
Views: 2161

Re: Firmware version

I got it!

In the "Files" sectian I have an old firmware file, so I upload the new one:

Image

Then reboot and now it is in the last firmware.

Thanks for your help.

Regards.
by josu
Sun Jan 22, 2017 12:08 am
Forum: Wireless Networking
Topic: Priorize voip traffic in point-to-point wireless link
Replies: 12
Views: 3318

Priorize voip traffic in point-to-point wireless link

Hello, I have a point-to-point wireless link between 2 SXT devices configured in "bridge" and "station bridge mode. I have a voip server in one side configured with DSCP and have marked the traffic in both APs with mangle (mark packet). In other side I have a voip client, in normal conditions it wor...
by josu
Wed Jan 18, 2017 9:30 am
Forum: General
Topic: Cacti Templates
Replies: 1
Views: 948

Re: Cacti Templates

I am looking for it too.

With Cati default template you can graphic interface bw, cpu and memory usage.

There are some old templates to graphic devices temperature, but they are outdated.

I am looking for a template to see wireless values.

It will be great to uodate thoosr templates.

Regards.
by josu
Wed Jan 11, 2017 11:18 am
Forum: General
Topic: RB750GL vs. RB450G
Replies: 0
Views: 466

RB750GL vs. RB450G

Hello, I have actually a RB750GL device at home with a 100/10mbps cablemodem internet connection. I have a old RB450G that could use, so my question is: 1. Is RB450G better that RB750GL? 2. Ehat about Fasttrack? The documentation say that RB450G does not support it. Which device could you use? I wil...
by josu
Wed Jan 11, 2017 11:11 am
Forum: General
Topic: Multicast pixelation in Routerboard
Replies: 1
Views: 597

Re: Multicast pixelation in Routerboard

I change the devive for a RB3011 and nlw it works well.

Regards.
by josu
Wed Jan 11, 2017 11:09 am
Forum: General
Topic: DSCP in the p2p wireless link
Replies: 1
Views: 494

Re: DSCP in the p2p wireless link

Hello,

Someone could help?

Regards.
by josu
Mon Jan 09, 2017 12:28 pm
Forum: General
Topic: RB3011 IPSEC Hardware Encryption?
Replies: 17
Views: 7448

Re: RB3011 IPSEC Hardware Encryption?

Is there any plan to implement it?

It will great to have it in the next release.

Regards.
by josu
Mon Jan 02, 2017 5:32 pm
Forum: General
Topic: DSCP in the p2p wireless link
Replies: 1
Views: 494

DSCP in the p2p wireless link

Hello, I have this network diagram: http://i67.tinypic.com/2a6ts7q.png There is a IPTV server in LAN1 and IPTV client in LAN2. There is a wireless point-to-point link with Mikrotik SXT devices. Configured bridge wlan and eth interfaces. All works great, the IPTV streaming is working well, the only p...
by josu
Mon Dec 05, 2016 11:56 pm
Forum: RouterBOARD hardware
Topic: Firmware version
Replies: 12
Views: 2161

Re: Firmware version

Thanks for the reply.

I use the devices in active link and I have no easy access to them.

I prefer to not break it. Could I update and mantain same configuration?

Best regards.
by josu
Mon Dec 05, 2016 3:10 pm
Forum: RouterBOARD hardware
Topic: Firmware version
Replies: 12
Views: 2161

Re: Firmware version

No idea about that, actually both have same versions.

They work well, but I prefer to have same firnware.

Hope someone could explain it.

Regards.
by josu
Mon Dec 05, 2016 9:27 am
Forum: RouterBOARD hardware
Topic: Firmware version
Replies: 12
Views: 2161

Re: Firmware version

Hello

6.37.3 in both.

Regards.
by josu
Mon Dec 05, 2016 8:12 am
Forum: RouterBOARD hardware
Topic: Firmware version
Replies: 12
Views: 2161

Re: Firmware version

Hello, I don't know. I buy it to other person, maybe he could install RC.

Which is the stable firmware for this devices? Could I update it manually?

Best regards.
by josu
Sun Dec 04, 2016 9:39 pm
Forum: RouterBOARD hardware
Topic: Firmware version
Replies: 12
Views: 2161

Firmware version

Hello,

I have two SXT 5HPnD to connect two remote sites, they work great, but the available firmware version is different:

Image

Image

Why is that? Both have same packages versions.

Thanks and regards.
by josu
Tue Nov 22, 2016 9:43 pm
Forum: General
Topic: Routerboard 3.35 firmware upgrade
Replies: 1
Views: 1244

Re: Routerboard 3.35 firmware upgrade

I just upgrade a RB3011 and works great.

Regards.
by josu
Mon Nov 21, 2016 3:52 pm
Forum: RouterBOARD hardware
Topic: RB3011UiAS-RM problem with power connector
Replies: 6
Views: 2190

Re: RB3011UiAS-RM problem with power connector

I have same problem.

I just plug it and didn't touch any more.

It is a big problem if you put in a rack that more people work.

Regards.
by josu
Tue Nov 15, 2016 10:05 am
Forum: General
Topic: VPN to 443 port from Android
Replies: 8
Views: 6469

Re: VPN to 443 port from Android

Thanks!!!

It really works great! Thank you very much for the help.

Best regards.
by josu
Fri Nov 11, 2016 7:01 pm
Forum: General
Topic: VPN to 443 port from Android
Replies: 8
Views: 6469

Re: VPN to 443 port from Android

I actually have deployed MikroTik OpenVPN server running on TCP port 443. Works like a charm with "OpenVPN Connect" app for Android.
Great!

Could you share the configuration please?

I will really appreciate it.

Best regards.
by josu
Thu Nov 10, 2016 9:54 pm
Forum: General
Topic: VPN to 443 port from Android
Replies: 8
Views: 6469

Re: VPN to 443 port from Android

Thanks!

I will try SSTP.

Best regards.
by josu
Thu Nov 10, 2016 6:43 pm
Forum: General
Topic: 3 public IP in cable modem
Replies: 2
Views: 621

Re: 3 public IP in cable modem

I have never tried that. You should be able to look at the netmask assigned to your router and figure out your remaining IPs the cable modem will support. Assign fixed IP on the devices. Do not NAT those devices. You may also need to add route entries to the ports those devices are attached to. Tha...
by josu
Thu Nov 10, 2016 4:21 pm
Forum: General
Topic: 3 public IP in cable modem
Replies: 2
Views: 621

3 public IP in cable modem

Hello all, I had an old cable modem with 4 ethernet interfaces. I could connect 3 devices there and each device toke (dhcp) 1 public IP. Now the ISP change the modem and it just have one ethernet port. This port is connected to a Mikrotik router which take the public IP in the WAN port. How could I ...
by josu
Thu Nov 10, 2016 4:15 pm
Forum: General
Topic: VPN to 443 port from Android
Replies: 8
Views: 6469

VPN to 443 port from Android

Hello all, I have a RB750G router and home and I want to use it as VPN server to connect from outside to local services. I configure both PPTP and L2TP/IPSec and both works great from mobile networks. The problem is that in my work I have limited wireless network and I can not access to thoose ports...
by josu
Sun Oct 30, 2016 5:07 pm
Forum: Wireless Networking
Topic: Graph wireless link values
Replies: 2
Views: 685

Re: Graph wireless link values

You can take the oids directly from ros without any template. I am not experienced in cacti but in dude it is easy so I expect the same... Thanks jarda, I use Cacti for servers and it is really important to me to add the RB device on it. I will look to SNMP OID. Anyone with Cacti and Mikrotik devic...
by josu
Sun Oct 30, 2016 12:34 am
Forum: Wireless Networking
Topic: Graph wireless link values
Replies: 2
Views: 685

Graph wireless link values

Hello, I have a wireless link between 2 Routerboard devices. I use Cacti with SNMP to graph some values as CPU, memory and interfaces values. They are default templates. I want to know if there are some templates to graph different values as signal to noise or CCQ. I will really appreciate your help...
by josu
Wed Oct 05, 2016 6:46 pm
Forum: Wireless Networking
Topic: Wireless protocol for a point-to-point link
Replies: 5
Views: 1177

Re: Wireless protocol for a point-to-point link

Try also nv2 or nstreme and select what best suits you and your conditions and circumstances.
Thanks!

How could I know which is the best? Bandwidth test?

Thank you very much.

Kind regards.
by josu
Wed Oct 05, 2016 8:10 am
Forum: Wireless Networking
Topic: Wireless protocol for a point-to-point link
Replies: 5
Views: 1177

Re: RE: Re: Wireless protocol for a point-to-point link

802.11
Thanks!

So I will select the 802.11 instead of any.

Regards.
by josu
Tue Oct 04, 2016 5:15 pm
Forum: Wireless Networking
Topic: Wireless protocol for a point-to-point link
Replies: 5
Views: 1177

Wireless protocol for a point-to-point link

Hello,

I have a point-to-point link between 2 SXT 5HPnD devices. I leave the default option for "Wireless Protocol": any

In the status I can check that it takes "802.11" value.

Which one do you recommend? nstreme? nv2?

The link is for a 500 meters.

Thanks for your help.

Kind regards.
by josu
Mon Oct 03, 2016 12:33 pm
Forum: RouterBOARD hardware
Topic: Problem with IPTV on RB850Gx2
Replies: 14
Views: 4668

Re: Problem with IPTV on RB850Gx2

Thanks for the reply.

Enviado desde mi MI 5 mediante Tapatalk
by josu
Mon Oct 03, 2016 11:29 am
Forum: RouterBOARD hardware
Topic: Problem with IPTV on RB850Gx2
Replies: 14
Views: 4668

Re: RE: Re: Problem with IPTV on RB850Gx2

Is this solved?

I want to change the 450G wit a RB850Gx2. I use IPTV too.
No, it's not solved yet.
Thanks,

And could we send this issue to developers?

Or have support from Mikrotik?

Kind regards.
by josu
Mon Oct 03, 2016 11:26 am
Forum: RouterBOARD hardware
Topic: RB3011 sold out in US - available anywhere else?
Replies: 12
Views: 2358

Re: RB3011 sold out in US - available anywhere else?

Hello,

What about the desktop edition?

Is it available?

Kind regards.
by josu
Mon Oct 03, 2016 11:21 am
Forum: RouterBOARD hardware
Topic: Problem with IPTV on RB850Gx2
Replies: 14
Views: 4668

Re: Problem with IPTV on RB850Gx2

Hello,

Is this solved?

I want to change the 450G wit a RB850Gx2. I use IPTV too.

Kind regards.
by josu
Mon Oct 03, 2016 11:18 am
Forum: Beginner Basics
Topic: High temperature in RB450G
Replies: 0
Views: 563

High temperature in RB450G

Hello,

My RB450G is geting so hot this days:
[admin@router] > /system health print  
      voltage: 25.2V
  temperature: 81C
This is the CPU usage:

Image

Is this values normal? I will appreciate your help.

Kind regards.
by josu
Tue Sep 27, 2016 11:19 pm
Forum: General
Topic: Wireless values on SNMP for Cacti
Replies: 0
Views: 361

Wireless values on SNMP for Cacti

Hello,

I use Cacti to monitor my RouterBoars devices.

By default it works well for onterface traffic and CPU/memory load.

Is it possible to graph wireless values as signal and noise dBm?

Someone use it?

Best regards.
by josu
Thu Sep 22, 2016 11:41 am
Forum: General
Topic: Multicast pixelation in Routerboard
Replies: 1
Views: 597

Multicast pixelation in Routerboard

Hello, I have Routerboard 750GL device and I use it with my ISP to watch IPTV and internet service. The problem is that with HD channels it show pixelated images. Is possible to debug and see if the device drop packages? I use to graph the CPU and network usage of the router and it is not very busy:...
by josu
Mon Sep 05, 2016 9:46 am
Forum: Wireless Networking
Topic: Security profile for a point-to-point link
Replies: 5
Views: 1666

Re: Security profile for a point-to-point link

PSK, no need for EAP.

I would use access list for explicit enabling mac addresses, if necessary.
Thanks!

And what about "Unicast Ciphers" and "Group Ciphers" options? I have "aes ccm" and "tkip". I selected default option (aes ccm).

Kind regards.
by josu
Wed Aug 31, 2016 2:03 pm
Forum: Wireless Networking
Topic: Wireless parameters for a point-to-point link
Replies: 0
Views: 532

Wireless parameters for a point-to-point link

Hello all, I am configuring a point-to-point link between 2 SXT 5HPnD devices. 500m in I little city. The device are in the top of 5 floor buildings. I configure with default configuration parameters: SiteA: /interface wireless set [ find default-name=wlan1 ] band=5ghz-a/n channel-width=20/40mhz-Ce ...
by josu
Wed Aug 31, 2016 1:40 pm
Forum: Wireless Networking
Topic: Security profile for a point-to-point link
Replies: 5
Views: 1666

Re: Security profile for a point-to-point link

Wpa2. Thanks! I configure same security profiles in both sites: http://i67.tinypic.com/2ennkvq.png I have some questions: 1. PSK or EAP? Which is better? Or both? 2. MAC Authentication? Could I configure it? I want to configure a secure link with a good bandwidth, do you recommend other change in t...
by josu
Mon Aug 29, 2016 12:16 pm
Forum: Wireless Networking
Topic: Security profile for a point-to-point link
Replies: 5
Views: 1666

Security profile for a point-to-point link

Hello, I have a point-to-point link between 2 SXT 5HPnD devices. I leave the default security profile to test and I can ping between both devices. /interface wireless set [ find default-name=wlan1 ] band=5ghz-a/n channel-width=20/40mhz-Ce disabled=no frequency=5805 ht-supported-mcs=\ mcs-0,mcs-1,mcs...
by josu
Tue Jul 26, 2016 9:17 am
Forum: General
Topic: Web access from external
Replies: 13
Views: 3841

Re: Web access from external

Change from
Ip service, in www
Change to 8080 apply ok
Now open browser
Write your public ip address with :8080 like
X. X. X. X:8080
Thanks!
It works too.
Best regards.
by josu
Fri Jul 08, 2016 11:17 am
Forum: Wireless Networking
Topic: Join to sites with SXT devices
Replies: 1
Views: 402

Join to sites with SXT devices

Hello, I have 2 sites with a Mikrotik router and internet access. There are 1km far each other, I want to join both sites with SXT devices.  Each site have it's own network: 192.168.1.0/24 and 192.168.2.0/24 I read about how to do that but I see lots of modes: brigde, wps...  Which one do you recomm...
by josu
Sun Jun 19, 2016 11:15 pm
Forum: General
Topic: Priorize destination tcp port
Replies: 0
Views: 484

Priorize destination tcp port

Hello, I have installed Tvheadend service in my fathers home. I have a RB450G device on it and it works great. In my home I have a RB750GL and I connect to my father Tvheadend service (TCP 9981 and 9982). Thveadend is a tv streaming service, it works well most of the time, but sometikes I get pixele...
by josu
Thu Jun 16, 2016 5:08 pm
Forum: General
Topic: IPSec with dyndns
Replies: 8
Views: 3593

Re: IPSec with dyndns

Thanks!

I will try it.

Regards.
by josu
Thu Jun 16, 2016 11:51 am
Forum: General
Topic: VPN in P2P mode with dynamic IPs
Replies: 6
Views: 1663

Re: VPN in P2P mode with dynamic IPs

You can enter DNS name directly in connect-to field ,no need for scripts.

@josu: you mean like changing  parameter --topology to p2p? If so then it is not possible, RouterOS by default uses subnet topology.
Thanks!
by josu
Thu Jun 16, 2016 9:27 am
Forum: RouterBOARD hardware
Topic: rb3011 based on ARM CPU
Replies: 57
Views: 30065

Re: rb3011 based on ARM CPU

Yes, it has the hardware, but no it's not yet working - they haven't gotten the drivers for it integrated into RouterOS yet. I presume that will be something that happens in ROSv7.... whenever that might be. (It's like sasquatch - there have been a few blurry pictures of it, but nothing concrete). ...
by josu
Thu Jun 16, 2016 9:16 am
Forum: General
Topic: VPN in P2P mode with dynamic IPs
Replies: 6
Views: 1663

Re: VPN in P2P mode with dynamic IPs

I've never played around with OVPN so I'm not sure about the specifics, especially in Mikrotik routers, but in general, I would say that you could probably roll a solution with a script (grrr - scheduled scripts are against my religion in most cases, but yours seems to be one of those necessary one...
by josu
Wed Jun 15, 2016 10:41 pm
Forum: RouterBOARD hardware
Topic: rb3011 based on ARM CPU
Replies: 57
Views: 30065

Re: rb3011 based on ARM CPU

Has the RB3011 IPSec hardware acceleration?

I am looking for a cheap device that could handle 500mbps IPSec.

Regards.
by josu
Wed Jun 15, 2016 6:59 pm
Forum: RouterBOARD hardware
Topic: Cryptographic accelerator for IPSec
Replies: 10
Views: 2382

Re: Cryptographic accelerator for IPSec

Hello,

And what about RB3011?

It looks great and it is not so expensive. Could it handle a IPSec 300mbps?

Best regards.
by josu
Wed Jun 15, 2016 6:58 pm
Forum: General
Topic: VPN in P2P mode with dynamic IPs
Replies: 6
Views: 1663

Re: VPN in P2P mode with dynamic IPs

Hi
No you can't do it. You should have static ip in both sides of tunnel.
Hello,
I have actually running it with OpenWRT. In both sites I have dynamic IP but I use dyndns scripts.
Regards.
by josu
Mon Jun 13, 2016 4:32 pm
Forum: General
Topic: Problems with OpenVPN
Replies: 4
Views: 780

Re: Problems with OpenVPN

Did you set proxy-arp in the lan interface? 

J.
Thanks javino,
How could I check it?
Best regards.
by josu
Mon Jun 13, 2016 4:31 pm
Forum: General
Topic: Problems with OpenVPN
Replies: 4
Views: 780

Re: Problems with OpenVPN

Look if the route table looks OK and the firewall allows the forwarding of the traffic. Also check if the NAT rule does not apply to your traffic between local networks. Thanks for the reply. This is the server-side information: /ip route print  Flags: X - disabled, A - active, D - dynamic,  C - co...
by josu
Mon Jun 13, 2016 1:15 pm
Forum: General
Topic: Problems with OpenVPN
Replies: 4
Views: 780

Problems with OpenVPN

Hello, I have 2 Mikrotik routers and I want to do a OpenVPN between both networks. I configured this way the server: /interface ovpn-server server set certificate=myCa enabled=yes require-client-certificate=yes /ip firewall filter add chain=input dst-port=1194 in-interface=pppoe-out1 protocol=tcp /p...
by josu
Fri Jun 10, 2016 12:26 pm
Forum: General
Topic: OpenVPN p2p mode
Replies: 2
Views: 1294

Re: OpenVPN p2p mode

I am looking for same.

Anyone have any example?

Best regards.
by josu
Fri Jun 10, 2016 12:23 pm
Forum: General
Topic: VPN in P2P mode with dynamic IPs
Replies: 6
Views: 1663

VPN in P2P mode with dynamic IPs

Hello,

I have 2 Mikrotik routers in different locations with dynamic public IP. I want to join both with a VPN. I have dynamic dns working in both sites.

I read about P2P OpenVPN mode, is it possible to configure it in Mikrotik routers?

Thanks and regards.
by josu
Thu Jun 09, 2016 10:11 am
Forum: General
Topic: IPSec with dyndns
Replies: 8
Views: 3593

Re: IPSec with dyndns

Thank you very much.

Could you send my the pure IPSec?

I am new with script, where could I define the remote dns name?

Do you run it with a schedule?

Thank you very much.

Best regards.
by josu
Thu Jun 09, 2016 10:01 am
Forum: General
Topic: Delete all files from RB
Replies: 4
Views: 1875

Re: Delete all files from RB

Well yes you can delete it but it'll probably reappear. It's the folder used to store Webfig skins so routerOS will probably recreate it.
Thanks!

I delete it, reboot the RB and now there are not any entry in Files. It works great.

Thanks and regards.
by josu
Wed Jun 08, 2016 11:59 pm
Forum: General
Topic: IPSec with dyndns
Replies: 8
Views: 3593

Re:

I can post my script later

Sent from my XT1575 using Tapatalk
Thanks!
by josu
Wed Jun 08, 2016 6:56 pm
Forum: General
Topic: IPSec with dyndns
Replies: 8
Views: 3593

Re: IPSec with dyndns

You would need to set some regular script to change the ip addresses when they change.
Thanks!

I have a script in a server inside the LAN to change the IP of the dns name.

But the problem is that I can not add a dns name in the filed, just a IP address.

Regards.
by josu
Wed Jun 08, 2016 6:21 pm
Forum: General
Topic: IPSec with dyndns
Replies: 8
Views: 3593

IPSec with dyndns

Hello, I have 2 Mikrotik routers in different sites and I want to join both with IPSec. I have dynamic public IP in both site, but I use dyndns and it works great to access from outside. I try to configure IPSec but I can not add dns name in the "SA Src. Address" field. Is is possible to configure I...
by josu
Wed Jun 08, 2016 6:04 pm
Forum: General
Topic: Delete all files from RB
Replies: 4
Views: 1875

Re: Delete all files from RB

Hi, usually you can delete all files. Folders like the hotspot folder get generated automatically by the hotspot server if not specified. Backup files are created before a reset an can also be deleted. What kind of files do you have on your device? Best regards 1001001 Thanks! I delete all except "...
by josu
Wed Jun 08, 2016 1:55 pm
Forum: General
Topic: Delete all files from RB
Replies: 4
Views: 1875

Delete all files from RB

Hello,

I recently buy a RB750GL and has lots of configuration, so I reset and upgrade to latest version.

The problem is that there are lots of files. Could I delete all files? Need I preserve some files or directories?

Best regards.
by josu
Tue May 31, 2016 10:45 pm
Forum: General
Topic: Web access from external
Replies: 13
Views: 3841

Re: Web access from external

/ip firewall nat
add chain=dstnat dst-address=Public-IP-RB dst-port=8080 protocol=tcp action=dst-nat to-addresses=Public-IP-RB to-port=80
Thanks!

I did it this way:
/ip firewall nat add action=dst-nat chain=dstnat dst-port=8080 protocol=tcp to-ports=80
Best regards.
by josu
Sun May 29, 2016 12:00 pm
Forum: RouterBOARD hardware
Topic: Hard reset RB450G
Replies: 2
Views: 2330

Re: Hard reset RB450G

Wait until the router lights start flashing
Then release to be restarted
Thanks!

I press the reset until light start blinkikg and it works!

Best regards
by josu
Sun May 29, 2016 10:42 am
Forum: General
Topic: Web access from external
Replies: 13
Views: 3841

Re: Web access from external

Change www Port to 8080 in Service Menu Add the following command. /ip firewall nat add chain=dstnat dst-address=Local-IP-RB dst-port=80 protocol=tcp action=dst-nat to-addresses=Local-IP-RB to-port=8080 Thanks again. But I can not change the Service port, I want to access from port 80 by LAN and fr...
by josu
Sun May 29, 2016 10:22 am
Forum: RouterBOARD hardware
Topic: Hard reset RB450G
Replies: 2
Views: 2330

Hard reset RB450G

Hello, I add a bad configuration to my RB450G. And now I can not access to it. How could I make a hard reset? I try to ipen the box, and do a contact in the reset pins with a metel, bit nothing happens. I makes a beep but still can not to access. Which is the correct steps? Switc off, contact the pi...
by josu
Sun May 29, 2016 1:53 am
Forum: RouterBOARD hardware
Topic: Cryptographic accelerator for IPSec
Replies: 10
Views: 2382

Re: Cryptographic accelerator for IPSec

You already picked cheapest one, RB850x2. Other routers more expensive are RB1100AHx2 and CCR series rotuers.
Thanks!
by josu
Fri May 27, 2016 2:23 pm
Forum: RouterBOARD hardware
Topic: Cryptographic accelerator for IPSec
Replies: 10
Views: 2382

Re: Cryptographic accelerator for IPSec

No, that one has weak CPU and no HW acceleration, max ipsec throughput is around 25Mbps.
Thanks!

So, which device is the cheaper for 300mbps symmetric IPSec connection?

Thank you.
by josu
Fri May 27, 2016 2:10 pm
Forum: General
Topic: Web access from external
Replies: 13
Views: 3841

Re: Web access from external

what is IP Public and www Port ?
I want to use 8080 port from external, it works in 80 port in LAN.

Regards.
by josu
Fri May 27, 2016 2:09 pm
Forum: RouterBOARD hardware
Topic: Cryptographic accelerator for IPSec
Replies: 10
Views: 2382

Re: Cryptographic accelerator for IPSec

Yes, you asked about ipsec.
Thanks!

And what about RB450G? I have one of them, could I use in my installation?

Thank you for your help.

Kind regards.
by josu
Fri May 27, 2016 1:05 pm
Forum: RouterBOARD hardware
Topic: Cryptographic accelerator for IPSec
Replies: 10
Views: 2382

Re: Cryptographic accelerator for IPSec

Maximum throughput on this device is ~500Mbps UDP traffic with 1400byte packets.
Thanks!

This value is on IPSec?

Regards.
by josu
Fri May 27, 2016 11:10 am
Forum: General
Topic: Web access from external
Replies: 13
Views: 3841

Re: Web access from external

IP Public set on RB or DSL Modem ?
is active www in IP Service Menu?
Public IP in RB.
www is active in Service Menu.
by josu
Fri May 27, 2016 9:38 am
Forum: General
Topic: Web access from external
Replies: 13
Views: 3841

Re: Web access from external

do you want access to RouterBoard on web ?
do you have a IP Public?
Hello,

Yes, I want to access to RB from web.

I have a public IP.

Regards.
by josu
Thu May 26, 2016 9:54 pm
Forum: RouterBOARD hardware
Topic: Cryptographic accelerator for IPSec
Replies: 10
Views: 2382

Cryptographic accelerator for IPSec

Hello,

I want to join 2 office with IPSec, each one have symmetric 300Mbps internet connection.

I want to use RB 850Gx2 devices. Could this RB handle a 300Mbps IPSec connection?

Anyone have similar installation?

Thanks for you help.
by josu
Thu May 26, 2016 6:08 pm
Forum: Scripting
Topic: First script
Replies: 1
Views: 701

First script

Hello, I have a new RB in my home, I want to configure this script: https://www.letitux.com/routeur-os-mikrotik/2012/09/30/script-de-mise-a-jour-du-dynhost-dovh-router-os.html I change "Configuration" section and upload to System - Scripts and put some Policies http://i64.tinypic.com/iyjxa9.png I "R...
by josu
Wed May 25, 2016 11:51 pm
Forum: RouterBOARD hardware
Topic: 100Mbps VPN
Replies: 6
Views: 1701

Re: 100Mbps VPN

Thanks!

So 850Gx2 is the hardware a need.

Best regards.
by josu
Wed May 25, 2016 11:47 pm
Forum: General
Topic: Web access from external
Replies: 13
Views: 3841

Web access from external

Hello, I want to manahe my Mikrotik router from external locate.

I want to change thw port number to 8080.

How could I add a firewall rule to do it?

I try with nat and firewall filters bit nothing.

Could yoy help to configure it?

Best regards.
by josu
Wed May 25, 2016 5:28 pm
Forum: RouterBOARD hardware
Topic: 100Mbps VPN
Replies: 6
Views: 1701

Re: 100Mbps VPN

I use two hAP with IPSec tunnel. Since it lacks crypto-offload, it maxes out about ~30Mbps I suggest IPSec with some board with crypto-offload in hardware. OpenVPN support on RouterOS isn't that great (and IPSec is much better for permanent/static tunnels) If security is not a concern, you could us...
by josu
Wed May 25, 2016 11:42 am
Forum: RouterBOARD hardware
Topic: 100Mbps VPN
Replies: 6
Views: 1701

Re: 100Mbps VPN

Thanks chechito.

Is there other VPN that could handle more bandwidth, I don't need to mush security in the link.

Regards.
by josu
Tue May 24, 2016 11:24 pm
Forum: RouterBOARD hardware
Topic: 100Mbps VPN
Replies: 6
Views: 1701

100Mbps VPN

Hello all, I have a RB450G router with a 300Mbps/300Mbps internet connection. In other place I have a 100Mbps/10Mbps internet connection and I want to join them with a VPN. I read in the IPSec wiki that it depend on which hardware I use I could get different results. If I put the RB 450G and a RB750...
by josu
Tue May 24, 2016 12:26 pm
Forum: SwOS
Topic: IGMP snooping in RB260GS
Replies: 4
Views: 3263

Re: IGMP snooping in RB260GS

Thanks!
by josu
Mon May 23, 2016 11:51 am
Forum: SwOS
Topic: IGMP snooping in RB260GS
Replies: 4
Views: 3263

Re: IGMP snooping in RB260GS

No, igmp snooping not supported.
Thanks.

So, could I use diferente VLANs to separate IPTC network?

Regards.
by josu
Mon May 23, 2016 11:47 am
Forum: SwOS
Topic: IGMP snooping in RB260GS
Replies: 4
Views: 3263

IGMP snooping in RB260GS

Hello,

I buy a RB260GS to manage my home network. I am using IPTV and I want to know if the switch support IGMP snooping.

Regards.
by josu
Mon Jan 18, 2016 9:34 am
Forum: General
Topic: 2 PPTP clinet in same Mikrotik server
Replies: 2
Views: 556

Re: 2 PPTP clinet in same Mikrotik server

Try enabling PPTP logging. System > Logging, add rule, topic=PPTP Then try and connect and view the log window. Anything interesting? Thanks! I will try it. I think that the problem could be here: /ppp secret add name=Client1 service=pptp password=passw0rd local-address=172.16.1.1 remote-address=17...
by josu
Wed Jan 13, 2016 5:03 pm
Forum: General
Topic: 2 PPTP clinet in same Mikrotik server
Replies: 2
Views: 556

2 PPTP clinet in same Mikrotik server

Hello all, I have configured a PPTP client-server and it works really well. I configured this way: Server side: /ppp secret add name=Client1 service=pptp password=passw0rd local-address=172.16.1.1 remote-address=172.16.1.2 routes="192.168.1.0/24 172.16.1.2 1" /interface pptp-server server set enable...
by josu
Thu Dec 17, 2015 6:43 pm
Forum: Beginner Basics
Topic: Move firewall rules
Replies: 2
Views: 2477

Re: Move firewall rules

Thanks!

It works!

Best regards.
by josu
Thu Dec 17, 2015 6:10 pm
Forum: Beginner Basics
Topic: Move firewall rules
Replies: 2
Views: 2477

Move firewall rules

Hello, I add a firewall rule to the Mikrotik: /ip firewall filter add chain=input dst-port=161 protocol=udp action=accept But the problem is that it goes to the end of the rules, so it is not working: /ip firewall filter export # dec/17/2015 16:12:07 by RouterOS 6.33.3 # software id = 9DRR-XSRN # /i...
by josu
Tue Dec 01, 2015 9:36 am
Forum: RouterBOARD hardware
Topic: PoE with 750UP r2
Replies: 9
Views: 2299

Re: PoE with 750UP r2

Hello again, I change the "PoE Out" to "forced on" in the ethernet3, now I have this: [admin@MikroTik] > /interface ethernet poe monitor ether3-slave-local name: ether3-slave-local poe-out-status: powered-on poe-out-voltage: 23.5V poe-out-current: 0mA poe-out-power: 0W -- [Q quit|D dump|C-z pause] B...
by josu
Tue Dec 01, 2015 9:24 am
Forum: RouterBOARD hardware
Topic: PoE with 750UP r2
Replies: 9
Views: 2299

Re: PoE with 750UP r2

Thanks both for the replies. This what I have: [admin@MikroTik] > /interface ethernet poe monitor ether3-slave-local name: ether3-slave-local poe-out-status: waiting-for-load -- [Q quit|D dump|C-z pause] My phone is a Panasonic KX-NT551, in the specification page says that it is PoE Class 3. So, bot...
by josu
Mon Nov 30, 2015 7:01 pm
Forum: RouterBOARD hardware
Topic: PoE with 750UP r2
Replies: 9
Views: 2299

PoE with 750UP r2

Hello,

I just buy a Mikrotik hEX PoE lite RouterBoard.

I plug a IP phone on the 5th ethernet port and it doesn't switch on.

May I need to configure something else?

Thanks and regards.
by josu
Wed Nov 04, 2015 11:40 am
Forum: Beginner Basics
Topic: VPN between Cisco and Mikrotik
Replies: 1
Views: 517

Re: VPN between Cisco and Mikrotik

Hello again, I have this: In Cisco with static IP: interface Tunnel1 description Mikrotik Tunnel ip address 10.0.0.1 255.255.255.0 tunnel source Loopback0 ! ip route 192.168.2.0 255.255.255.0 Tunnel1 In Mikrotik with dynamic IP: interface gre add name=tunnel0 remote-address=45.x.x.x ip address add a...
by josu
Wed Nov 04, 2015 10:34 am
Forum: Forwarding Protocols
Topic: Mikrotik to Cisco GRE Multipoint
Replies: 4
Views: 4609

Re: Mikrotik to Cisco GRE Multipoint

Hello,

I am looking for same configuration.

Do you get it working?

Regards.
by josu
Tue Nov 03, 2015 11:03 pm
Forum: Beginner Basics
Topic: VPN between Cisco and Mikrotik
Replies: 1
Views: 517

VPN between Cisco and Mikrotik

Hello all, I have 2 office which I want to join them with VPN. In one I have a Cisco router with a static public IP and in the other office I have a dynamic public IP and I wan to put a Mikrotik device. Is it possible to join both sites with VPN? The idea is to get 192.168.1.0/24 in one site and 192...
by josu
Mon Sep 07, 2015 11:54 pm
Forum: General
Topic: IPSec client without public IP
Replies: 7
Views: 2197

Thanks!

I will really appreciate your script.

The client is inside LAN (no public address) and there is no NAT in the client side. Is it possible?

Regards.
by josu
Mon Sep 07, 2015 6:31 pm
Forum: General
Topic: IPSec client without public IP
Replies: 7
Views: 2197

IPSec client without public IP

Hello,

I want to conect 2 Mikrotik routers with IPSec, one of them have a static public IP. But the other one have dynamic private IP.

Is it possible to create a IPSec tunnel between thoose devices?

I want to connect a laptop and voip phone in the client side.

Kind regards.
by josu
Thu Aug 06, 2015 12:20 pm
Forum: General
Topic: Cacti templates for Mikrotik
Replies: 2
Views: 1914

Re: Cacti templates for Mikrotik

Here is a simple snmp_query for CPU Graphs
Thanks!

Here we have more scripts: http://forum.mikrotik.com/viewtopic.php?f=2&t=21189

Regards.
by josu
Mon Aug 03, 2015 9:00 am
Forum: General
Topic: cacti: Mikrotik RouterOS Statistics (Update 11/19/2013)
Replies: 85
Views: 63241

Re: cacti: Mikrotik RouterOS Statistics (Update 11/19/2013)

Uploaded everything, with some more fixes at:

http://docs.cacti.net/usertemplate:host:mikrotik
Thanks!
by josu
Wed Jul 29, 2015 10:13 am
Forum: General
Topic: cacti: Mikrotik RouterOS Statistics (Update 11/19/2013)
Replies: 85
Views: 63241

Re: RouterOS Host template

Hello Based on the templates on the first page a managed to do some corrections, edited Uptime template to be cleaner, Memory and Storage template to be exact, and also created the Mikrotik templates for Cacti for Voltage and board temperature. These are useful when you have MikroTik routers connec...
by josu
Wed Jul 15, 2015 2:21 pm
Forum: General
Topic: Cacti templates for Mikrotik
Replies: 2
Views: 1914

Cacti templates for Mikrotik

Hello,

Anyone is using Cacti for monitor the Mikrotik devices?

It will be great to have some templates to monitor them. I asked in the Cacti forum: http://forums.cacti.net/viewtopic.php?f=12&t=54865

Maybe someone is working on it.

Thanks and regards.
by josu
Wed Jul 15, 2015 9:07 am
Forum: General
Topic: cacti: Mikrotik RouterOS Statistics (Update 11/19/2013)
Replies: 85
Views: 63241

Re: cacti: Mikrotik RouterOS Statistics (Update 11/19/2013)

I want to monitor interfaces bandwidth. Anyone has it working?

Regards.
The default templates of Cacti can measure bandwidth and total traffic out of the box.
Thanks!

But need I install a Mikrotik template? Or with the default template will work?

Best regards.
by josu
Tue Jul 14, 2015 6:42 pm
Forum: General
Topic: cacti: Mikrotik RouterOS Statistics (Update 11/19/2013)
Replies: 85
Views: 63241

Re: cacti: Mikrotik RouterOS Statistics (Update 11/19/2013)

I want to monitor interfaces bandwidth. Anyone has it working?

Regards.
by josu
Tue Jul 14, 2015 2:07 pm
Forum: General
Topic: cacti: Mikrotik RouterOS Statistics (Update 11/19/2013)
Replies: 85
Views: 63241

Re: cacti: Mikrotik RouterOS Statistics (Update 11/19/2013)

Hello,

It would be great to centralize all Mikrotik plugins in the Cacti documentation page: http://docs.cacti.net/plugin:mikrotik

Someone have this plugins working in a recent Cacti? If yes, I could help to centralize the plugins.

Kind regards.
by josu
Tue Jun 30, 2015 4:30 pm
Forum: General
Topic: Connect to Mikrotik with OpenVPN and NO certificate
Replies: 18
Views: 6258

Re: Connect to Mikrotik with OpenVPN and NO certificate

Add rule in input chain to allow ovpn before drop rule.
Thanks mrz,

How could I do that?

I try from web interface but I don't know how to up the rule.

Best regards.
by josu
Tue Jun 30, 2015 4:03 pm
Forum: General
Topic: Connect to Mikrotik with OpenVPN and NO certificate
Replies: 18
Views: 6258

Re: Connect to Mikrotik with OpenVPN and NO certificate

Check /ip firewall filter Thanks pukkita, This is what I have: [admin@MikroTik] > /ip firewall filter print Flags: X - disabled, I - invalid, D - dynamic 0 ;;; default configuration chain=input action=accept protocol=icmp log=no log-prefix="" 1 ;;; default configuration chain=input action=accept co...
by josu
Tue Jun 30, 2015 9:09 am
Forum: General
Topic: Connect to Mikrotik with OpenVPN and NO certificate
Replies: 18
Views: 6258

Re: Connect to Mikrotik with OpenVPN and NO certificate

/ip firewall nat add action=masquerade chain=srcnat src-address=10.10.10.0/24 I'd set the out-interface on that rule. Thanks! I got this line, but nothing. From WAN it is not possible to do a telnet to 1194 port. It works from LAN. This is my NAT rules: [admin@MikroTik] > /ip firewall nat print Fla...
by josu
Fri Jun 26, 2015 2:20 pm
Forum: General
Topic: Connect to Mikrotik with OpenVPN and NO certificate
Replies: 18
Views: 6258

Re: Connect to Mikrotik with OpenVPN and NO certificate

If I do a "telnet LAN_IP 1194" it works inside the LAN.
But from WAN "telnet WAN_IP 1194" it doesn't work.

How could I enable the OpenVPN service in the WAN interface?

Regards.
by josu
Fri Jun 26, 2015 12:01 pm
Forum: General
Topic: Connect to Mikrotik with OpenVPN and NO certificate
Replies: 18
Views: 6258

Re: Connect to Mikrotik with OpenVPN and NO certificate

Yes, it is possible, client can use only username and password. Thanks again, I read some blogs and now I have this: /certificate add name=ca-template common-name=myCa key-usage=key-cert-sign,crl-sign /certificate add name=server-template common-name=server /certificate sign ca-template ca-crl-host...
by josu
Thu Jun 25, 2015 3:22 pm
Forum: General
Topic: Connect to Mikrotik with OpenVPN and NO certificate
Replies: 18
Views: 6258

Re: Connect to Mikrotik with OpenVPN and NO certificate

You need also ovpn server certificate and enable ovpn server.
http://wiki.mikrotik.com/wiki/Manual:In ... n_Examples
Thanks again,

But I don't want to use certificate, is it obligatory to create the certificate?

Thanks for your great help.

Kind regards.
by josu
Thu Jun 25, 2015 1:48 pm
Forum: General
Topic: Connect to Mikrotik with OpenVPN and NO certificate
Replies: 18
Views: 6258

Re: Connect to Mikrotik with OpenVPN and NO certificate

Yes, it is possible, client can use only username and password. Thanks! Could you help please? I made this steps: Create a pool for VPN users: /ip pool add name=VPN_pool ranges=10.10.10.150-10.10.10.159 Create OpenVPN profile: /ppp profile add local-address=10.10.10.1 name="OpenVPN Profile" remote-...
by josu
Thu Jun 25, 2015 1:19 pm
Forum: General
Topic: Connect to Mikrotik with OpenVPN and NO certificate
Replies: 18
Views: 6258

Re: Connect to Mikrotik with OpenVPN and NO certificate

I search for the same problem :/
And did you find it?

Regards.
by josu
Wed Jun 24, 2015 1:33 pm
Forum: General
Topic: Connect to Mikrotik with OpenVPN and NO certificate
Replies: 18
Views: 6258

Connect to Mikrotik with OpenVPN and NO certificate

Hello,

I am configuring some Mikrotik routers and I want to manage with OpenVPN connection from outside.

Is it possible to connect with OpenVPN client without certificate? Just with username and password?

Anyone could help me with some command line steps?

Thanks for your help.

Kind regards.
by josu
Tue Jun 23, 2015 11:06 am
Forum: Beginner Basics
Topic: Full reset
Replies: 12
Views: 6709

Re: Full reset

Thanks all!

I was installing a old version of RouterOS.

I try with latest version and it works great!

Thank you very much for your great help.

Best regards.
by josu
Mon Jun 22, 2015 5:56 pm
Forum: Beginner Basics
Topic: Full reset
Replies: 12
Views: 6709

Re: Full reset

http://www.wirelessinfo.be/index.php/mikrotik/pages/netinstalle Thanks! I try to flash it, I load the image but now I have this in the serial: RouterBOOT booter 3.22 CRS109-8G-1S-2HnD CPU frequency: 600 MHz Memory speed: 200 MHz Memory size: 128 MiB NAND size: 128 MiB Press any key within 2 seconds...
by josu
Thu Jun 18, 2015 6:39 pm
Forum: Beginner Basics
Topic: Full reset
Replies: 12
Views: 6709

Re: Full reset

You just wiped it, need to netinstall to reinstall ROS on the device...
OK, thanks for the reply.

Anyone could help with a procedure to netinstall?

Need I download the firmware?

Best regards.
by josu
Thu Jun 18, 2015 10:53 am
Forum: Beginner Basics
Topic: Full reset
Replies: 12
Views: 6709

Re: Full reset

http://wiki.mikrotik.com/wiki/Manual:RouterBOOT Connect serial cable, set terminal to 115200bit/s, 8 data bits, 1 stop bit, no parity. Please a key before boot. Press "e" to format the nand. Thanks! I press "e", but now I have this: loading kernel from nand... kernel not found How could I solve it?...
by josu
Thu Jun 18, 2015 9:27 am
Forum: Beginner Basics
Topic: Full reset
Replies: 12
Views: 6709

Re: Full reset

Resetting the configuration is not the same as wiping the storage. I believe what you are looking for is a "netinstall". Use the Netinstall utility to clear the device completely and install a fresh copy of the RouterOS. http://download2.mikrotik.com/routeros/6.29.1/netinstall-6.29.1.zip Thanks, I ...
by josu
Tue Jun 16, 2015 10:17 am
Forum: Beginner Basics
Topic: Full reset
Replies: 12
Views: 6709

Full reset

Hello all,

I want to reset my new "Cloud Router Switch" device.

I want to delete all: configuration and files.

I try "Reset Configuration" but the files are not deleted.

Thanks for your help.

Kind regards.
by josu
Sat Jun 13, 2015 3:17 pm
Forum: Beginner Basics
Topic: Device don't boot
Replies: 5
Views: 1068

Re: Device don't boot

Firmware is already contained in ROS.

System > Routerboard check there, click on upgrade, reboot.
Thanks pukkita,

The problem is that I can't access to the web interface, I only have serial access to the device.

Kind regards.
by josu
Fri Jun 12, 2015 11:48 pm
Forum: Beginner Basics
Topic: Device don't boot
Replies: 5
Views: 1068

Re: Device don't boot

Have you tried netinstalling it? Upgrade it again, and make sure to upgrade firmware.
Thanks for the reply.

Where could I found the firmware?

I never upgrade fron network, need I configure a TFTP server?

Thanks for your great help.
by josu
Fri Jun 12, 2015 2:30 pm
Forum: Beginner Basics
Topic: Device don't boot
Replies: 5
Views: 1068

Device don't boot

Hello, I buy a Mikrotik Cloud Switch Series (CRS109-8G-1S-2HnD), I just upgrade the firmware and now it doesn't boot. I connect with serial and I get this: RouterBOOT booter 3.19 CRS109-8G-1S-2HnD Authorization: failure How could I rescue the device? I will appreciate your help. Best regards.
by josu
Sat Jun 06, 2015 7:44 pm
Forum: General
Topic: Priority with different networks
Replies: 0
Views: 339

Priority with different networks

Hello all, I have to create a network with different priorities: WAN is connected to cable connection. There is a LAN network for computers (192.168.1.0/24) There is a VoIP network with a PBX and VoIP phones (192.168.2.0/24) There is a wifi guest network (192.168.3.0/24) I am using a RB750 router, I...
by josu
Sat Jun 06, 2015 7:24 pm
Forum: General
Topic: Cacti template for Mikrotik
Replies: 2
Views: 10099

Cacti template for Mikrotik

Hello, I have some RB750 routers and I want to monitor with Cacti software. There is a old (2011) template available in Cacti site: http://docs.cacti.net/plugin:mikrotik I want to know if someone is using Cacti to monitor the Mikrotik devices and if there is a new template with more SNMP information...
by josu
Wed Jun 03, 2015 4:25 pm
Forum: General
Topic: VPN between 2 RB750GL
Replies: 4
Views: 776

Re: VPN between 2 RB750GL

Thanks!

I will use it.

Regards.
by josu
Wed Jun 03, 2015 8:45 am
Forum: General
Topic: VPN between 2 RB750GL
Replies: 4
Views: 776

Re: VPN between 2 RB750GL

Hi josu, Frequently i use L2TP/IPSEC to connect sites that share one IPPBX. Normally we connect calls under PCMU codec and the voice quality is excelent. In some cases we have to implement Qos for Voip or use lighter codecs like G729 depending the bandwidth and the network traffic. Regards. Thanks ...
by josu
Tue Jun 02, 2015 3:30 pm
Forum: General
Topic: VPN between 2 RB750GL
Replies: 4
Views: 776

VPN between 2 RB750GL

Hello, I want to connect to different networks with VPN using RB750GL routers. The networks are different: 192.168.1.0/24 and 192.168.2.0/24 I have static public ip in the WAN interface. I need to send VoIP from one network to other, which is the best method to do that? I read lots about IPSec, site...
by josu
Tue Jun 02, 2015 10:11 am
Forum: Beginner Basics
Topic: Simple NAT rule
Replies: 10
Views: 1826

Re: Simple NAT rule

Thanks! It works for me.

Best regards.
by josu
Tue Jun 02, 2015 9:55 am
Forum: Beginner Basics
Topic: Masquerade to other IP
Replies: 0
Views: 456

Masquerade to other IP

Hello all, I have a WAN interface configured with a PPPoE, it take a public IP address and I can navigate this way. It works great. The problem is that the PPPoE IP is dynamic, I have a /30 static public address that I can use with this connection, I want to navigate with this new IPs. How could I c...
by josu
Mon Jun 01, 2015 1:17 pm
Forum: Beginner Basics
Topic: Simple NAT rule
Replies: 10
Views: 1826

Re: Simple NAT rule

IP > Cloud
Thanks!

I enable the Cloud service, now I have a public domain.

So need I to use the "xxxxxxxxxxxx.sn.mynetname.net" in the "dst-address" configuration?

Best regards.
by josu
Mon Jun 01, 2015 12:40 pm
Forum: Beginner Basics
Topic: Simple NAT rule
Replies: 10
Views: 1826

Re: Simple NAT rule

I got it!
/ip firewall nat add action=dst-nat chain=dstnat dst-address=10.X.X.X dst-port=21 in-interface=ether1-gateway protocol=tcp to-addresses=192.168.88.10 to-ports=21
But I have a problem, my WAN interface is a dynamic public one, is it possible to put a alias for it?

Best regards.
by josu
Mon Jun 01, 2015 10:40 am
Forum: Beginner Basics
Topic: Simple NAT rule
Replies: 10
Views: 1826

Re: Simple NAT rule

Thanks!

One question, which "action" must I use to do a simple NAT from wan interface to LAN server?

Regards.
by josu
Sat May 30, 2015 11:57 pm
Forum: Beginner Basics
Topic: Simple NAT rule
Replies: 10
Views: 1826

Re: Simple NAT rule

Thanks, but I want to do it with command-line.

Then configure some scripts.

Regards.
by josu
Sat May 30, 2015 9:42 am
Forum: Beginner Basics
Topic: Delete public SNMP comunity
Replies: 3
Views: 1296

Re: Delete public SNMP comunity

Thanks for the reply,

I try it but it doesn't work. How could I change it?

Regards.
by josu
Thu May 28, 2015 6:33 pm
Forum: Beginner Basics
Topic: Simple NAT rule
Replies: 10
Views: 1826

Simple NAT rule

Hello, I want to create simple NAT rule to forward FTP (21) port to my LAN server (192.168.88.10). I create this way: /ip firewall nat add action=dst-nat chain=dstnat disabled=no dst-port=21 in-interface=ether1-gateway protocol=tcp to-addresses=192.168.88.10 to-ports=21 But in the web interface I go...
by josu
Wed May 27, 2015 6:28 pm
Forum: Beginner Basics
Topic: Delete public SNMP comunity
Replies: 3
Views: 1296

Delete public SNMP comunity

Hello all, This is my first post in this forum. I have a RB951G-2HnD and I want to configure a SMTP community for it. I create a new one this way: /snmp community add name=MyCommunity read-access=yes write-access=no /snmp set contact="Josu" location="MyTown" trap-community="MyCommunity" trap-version...