Janisk,isolation of cards could help you.
Can you precize what you mean by this?
Janisk,isolation of cards could help you.
Do you have EOIP tunnel within EOIP tunnel?Hi,
I have 1 EoIP with 4 RB333 and 1 more with 2 RB600 and working with no problems.
RB600 bonding 2 EoIP links and going to another RB600. RB600s connected with other EoIP. Only one EoIP between 2 same routerOS.
Martín.
It will not help to resolve problem. We already tried.Use static queues to solve this problem is impossible. Queues are created dynamically by radius attribute.
I want this desperately!!!!do you want v3 to ever be stable?
This can be real pain in the ass... Is there v3 rcX which is compatible with 2.9.X ??MT has recommended that you run all clients and base stations that connect on the same version. This means everything on 2.9 or 3.x, but not to mix and match.
Why you think that this is better?I recommend to use MRRU (PPP Multilink protocol) option and forget about Change-mms rules at all
But what is your problem then?
Being there, done that!
I supposed you'll recommend me a real load-balancer hardware next?
I've seen a few of your previous posts
What problems?I don't want to mark packets or anything that will cause the troubles as I have seen on other posts.
Yes there is: http://www.xbitlabs.com/news/cpu/displa ... 51158.htmlThere's no such thing as dual-core pentium 4. It's Pentium D.We ship PoweRouters with dual-core P4s and so far had no issues that I know of with using multi-cpu .
Yes, I emphaze semantics.
I noticed that V3 can detected new cards, but some of them are just detected and doesn't work, there is no traffic and it show: no link.RouterOS v3 should detect it
Why you think that you will lose license ?I Paid for license how can I upgrade on version 3 without losing the license..
Which version of MT ?This field on Wireless / Interfaces / General does not show full information about interface. Only the first line is visible and scroll buttons are disabled.
What is the bandwidth? How you test ping ?v3 at the time. 2600 tunnels at once.
Which RouterOS version you are running? How many pppoe tunnels you had active at the time you test ping ?We pinged a good number of customers from remote off-net IPs and never lost more than a single packet. The loss was well under 1%. Nothing like what was reported of 15+% ..
Still no 802.11N support in v3 ??????all new features are for v3 only. this is what makes 2.9 stable. if we start adding stuff to it, it will be exactly the same as a beta.
I disagree, It is excellent "piece of software". MT Stuff just need to fix Packet Loss which occuring when having 160+ pppoe tunnels.I just want to say 3.0 is not ready. more problem in 3.0
If you using 2.9.x try disabling and see what will heppends with stability...Yes, MT ROS 2.9.x does not recognize the onboard lan adapter on that GZIS motherboard, but ROS 3.0 do.Do you maybe have integrated motherboard lan card enabled on this pppoe machine which mikrotik 2.9.x doesn't see?
What is the period in days when your bgp router restarts or lock out?BGP reset again. So, the L7 rules did nothing.
Use maximum RAM of 512MB or downgrade to 2.9.XHello
First of all I use with multiprocessor support turned off and the processor was at 100% the I activated and down to 40 %
Thank
Rafael Lore
X86we are running nstream-dual with rc13 on rb333.
After a long period of fine tuning af the link we are very stable now.
What paltform are you running rb532a or x86?
No NAT/masquerade.You use Masquerade/NAT 1:1 or Connection tracking ?
Do you use it for public IP ranges?Leaving out some hickups that appear know and then.. it works OK. Not as good as quagga or cisco IOS but its OKish.
We have been using it in our community for almost 2 years know.
You don't need to do thisIS it possible to encrypt data send thru cards in nstreme dual slave mode?
It seems the security setting is ignored.
I could put some vpn encryption maybe, but that would require more cpu power
it is important with which interfaces?Does mikrotik support any dial-up interfaces either to allow others to dial in or to allow mikrotik to dial out?