I upgaded my old 10 and 2 brand new CRS326-24S+2Q+ from 7.6 to 7.12.1 I faced a problem after the upgrade: the ETHER1 (management) interface was not reachable from 3 devices of 12. One device was brand new, just got a DNS settings and an IP + DEF GW on the ETHER1 for the upgrade process. The solutio...

After i upgraded my 2 CRS326-24S+2Q+ pairs of switches in MLAG setup from 7.6 to 7.9.2, i faced with random packet loss between random hosts. After i moved back to 7.6 everything working normally.

7.9rc2 changelog:
Changes in this release:

*) ssh - added support for Ed25519 key export and import in PKCS8 format;

What's new in 7.9beta4 (2023-Mar-23 15:01):
*) ssh - added Ed25519 host key support;

I tried to set the eth2 and the eth4 on SW2 to edge port yes (in every combination) but it does not helped. Your entire topology is wrong. RSTP (or MSTP, whichever you require) should be enabled on all switches and configured correctly for all trunk ports aka non-edge ports. Fix your topology first...

Hi, my problem is similar but looks like this methods didn't resolve it. I have 3 switches: SW1: BPDU guard enable on all port (non Mikrotik) SW2: MT device, there is only a bridge and all ports are a member of it, STP set to NONE SW3: MT device, there is only a brdige, and all ports are a member of...

After upgraded my 4 CRS326-24S+2Q+ devices from 7.2 to 7.6, 2 of them shows a high CPU load (they are in one MLAG pair like the other 2 too where is no problem. The config is very simple, there are just some vlan on the bridge, nothing special L3 or filtering or queue setup. Just a pure switch with ...

On RBOmniTik-5HacD if i installed the 7.2.3 and requested a software reset (don't keep anything, so all field was empty and the Run After Reset field is empty too) and rebooted, the device looks like fall into etherboot state and appear for some second in winbox but not able to connect int and disap...

Hi I ran into a strange problem. I had to reinstall the system with Netinstall to the latest rc51 version. My device is a CRS109-8G-1S-2HnD which is a DHCP client on the SFP copper port (ISP is UPC). I try to run a speedtest.net from my desktop PC . After everything was ready, i tried to run a speed...

Hi On my 2 Hap AC Lite with CAPS if i modify anything in the CAPS part (fix the channel or TX power or whatever) after that applied it the next connected wifi client doesn't get IP from DHCP server that is on the CAPS manager too. I had to disable and enable again the DHCP row in the ip/dhcp-server ...

Hello I have a CRS109-8G-1S-2HnD and a HAP Lite in CAPSMAN mode. I upgraded the CRS first from 6.37.1 to 6.37.2. The HAP Lite still on 6.37.1. After the boot the HAP Lite connected to the CRS via CAPSMAN but not advertised any WIFI SSID. HAP rebooted but not helped. After upgraded it to 6.37.2 i got...

Zojka: may be a related config part would be great for the devs to build up your environment and try to it out.

Hi I have the some problem with my Oneplus 3. If i connect to any MT device (HAP Lite) with 6.37.1, the phone never goes to deepsleep if I use CM13 or CM14 roms. But sleep on every non MT device. I will try older MT images too and come back with the results if it interesting for the MT engineers......

Hi

I have the some problem with my Oneplus 3. If i connect to any MT device (HAP Lite) with 6.37.1, the phone never goes to deepsleep if I use CM13 or CM14 roms. But sleep on every non MT device.

I will try older MT images too and come back with the results if it interesting for the MT engineers...

Hi Check it: - https://routerboard.com/RB2011UiAS-2HnD-IN - http://i.mt.lv/routerboard/files/Block-RB2011UAS-2HnD.pdf Router is only 802.11 b/g/n. No 5ghz and AC support. The first 5 ports and the SFP are 10/100/1000Mbps, the last 5 ports are only 10/100Mbps. Check the block diagramm to see the spee...

This is on the linked page ( http://wiki.mikrotik.com/wiki/Manual:Spectral_scan ): "Currently, this feature is supported only for Atheros AR92xx, AR93xx and is NOT supported for Atheros 802.11ac chips (e.g. QCA98xx)." But on the last picture this scan run on an HAP AC device witch has a QC...

+1 for the example. I would like to use my Mikrotik RB to connect UPC Wi-Free like a client.

Hello On 6.30.2: [admin@e] > /ip service print Flags: X - disabled, I - invalid # NAME PORT ADDRESS CERTIFICATE 0 telnet 23 1 X ftp 21 2 X www 80 3 ssh 22 4 X www-ssl 443 none 5 X api 8728 6 winbox 8291 7 X api-ssl 8729 no On 6.34.1: [admin@e] /ip service> print Flags: X - disabled, I - invalid # NA...