Hm... your overall topology is much more complex with all those actual clients connected to WAPs which themselves are PPPoE clients of the 1036, and with 10 different src-nats at the 1036 and probably other NATs at the WAPs. So you'll have to carefully choose the proper IP addresses for filtering w...

Just a quick question how many clients are you running on that network at the moment?

More than 2000 hotspot clients, and about 50 pppoe clients.

Okay. In that case, I'd recommend you to disable the change-mss rule go to /tools packet-sniffer at both Mikrotiks and configure sniffing into a file at the 1036's uplink (internet-facing) interface and at 2011's interface facing towards the 1036. In both cases, filter by the IP address of a test c...

And where is/are your PPPoE client? In the 2011 or in users equipment connected to the 2011? Thank you pe1chl, 2011 is working as bridge, and the clients are connected after it. After 2011 there are wireless access points ---> stations ---> clients Some of the clients are TP-Link routers others are...

Here is a picture:

As I've started writing the answer I've realized I don't understand exactly your topology. Does the Mikrotik in question act as a PPPoE server to which other PPPoE clients connect, or as a PPPoE client on the internet uplink? If it is a PPPoE server for other clients, using what kind of interface i...

Unfortunately, I upgraded to 6.41.2 and tried many values of the mangle role, but I did not help. It is so strange. What should I do?!

Thank you very much sindy for your reply. My mikrotik device is working on 6.41 while I am writing this post. But I faced this problem when it was working under 6.37. I will try to upgrade it now to the last release which is 6.41.2 and try to use the mangle role as you suggested. Thank you again for...

Why this problem does not occur with hotspot users, but only with pppoe connected clients?!!

Thank you very much for your reply. I tried the (change-mss in mangle) as you suggested but, unfortunately, it did not fixed the problem. (however, when someone further upstream does that, you will have problems too) Can you explain this point more for me, please, because I think this maybe is the p...

Hi, A few weeks ago, a very strange problem started on my network. Only for pppoe connected clients, (Telegram and facebook messenger) stop working. They work like 5 minutes and then stop again. I tried the following: 1- Changing the MTU 2- netinstall my mikrotik device (1036). 3- Changin masquerade...

Thanks for your reply, About making the port mode as access port, it did not help me, because I have two VLANs (3000, 4000), I am sorry that I did not mentioned this, to simplify the case. Is the MikroTik port that is connected to the Ubnt configured as port to a bridge that is VLAN 3000? No, there ...

Are the Ubnt units aware of the VLAN or is it just passing through them as the native VLAN? If so you may have to configure the Huawei device as an access port on VLAN 3000.

I am just passing the VLAN through them.
I will check the mode of the port if it is access.

Thanks

Does the MikroTik 1036 have spanning-tree enabled? if so is it RSTP? What code version is it on? For the 1036 mikrotik, I am not using vlan on bridge, I am just using my VLAN on the port 9. For the 2011, I am using the bridge with rstp enabled. the first-end routerboard's version is 6.38.5 the seco...

Hello, I have a strange problem. I have connected two VLAN's on two mikrotik routeroard devices (2011+1036) through airmax wifi link, and it works perfect, and everything is OK. But I have tried to replace the second-end routeboard with my Huawei Smartax device with the same VLAN ID, but it did not ...

It seems either this problem has no solution or no one know anything.

I have some problems in usermanager
The radius is not responding after some time... I reboot routerboard about 5 times to rework.

Another problem is remain-bytes-total-nice stopped working.

could not upgrade my CCR1036 to this version. From system---packages >>>> it shows a message. "ERROR missing wireless-6.30.2-tile.npk" I download Extra files from the site and put it in the files and did reboot... it did not work. remove wireless package from current install. CCR doesn't ...

could not upgrade my CCR1036 to this version. From system---packages >>>> it shows a message. "ERROR missing wireless-6.30.2-tile.npk" I download Extra files from the site and put it in the files and did reboot... it did not work. remove wireless package from current install. CCR doesn't ...

usermanager problem from 6.30 release...
In hotspot alogin page remain-bytes-total-nice is not working while it was working will.

could not upgrade my CCR1036 to this version.
From system---packages >>>> it shows a message. "ERROR missing wireless-6.30.2-tile.npk"

I download Extra files from the site and put it in the files and did reboot... it did not work.

In my connections page::::
156479 items out of 123781 Max Entries: 524288

My routerborad is 1100.

Is this normal?????????
Is there any way to release these connections to reduce the items? Or there is no need?
My CPU reaches 60%

Thanks in advance,

Hi,
When I try to rebuild database from consol with "/tool usermanager database rebuild". I get the following message>
rebuilding user-manager database action time out.

From user-manager normal page, I do it, it takes a long time but I thing it works.

Please, it is a serious problem,. and it is not only with my routerboard..
I am waiting.

Hi, I have a problem with user manager, and as I noticed it is a common problem, with most of the routerboards that I used. Now, I am using CCR1036 version 6.30, I have about 4000 user, about 250 active. The problem is after some time, users get the message "RADIUS server not responding", ...

Hello, A few days ago, my metal stopped and its stations had disconnected. The ethernet connection is working good, and every thing seems work good, but ther wireless signal does not work, it does not appear and I can not connect to it. I tried reset config, upgrade, the problem still. Thanks in adv...