Community discussions

Search found 78 matches

  • 1
  • 2
by m4t7e0
Tue Aug 06, 2019 1:04 pm
Forum: The Dude
Topic: Dude - Device RouterOS on no-standard Port
Replies: 25
Views: 8150

Re: Dude - Device RouterOS on no-standard Port

try with dst nat and not redirect if the dude server is different from router .
by m4t7e0
Wed Jun 19, 2019 12:26 pm
Forum: RouterBOARD hardware
Topic: MTBF of RouterBOARD
Replies: 16
Views: 3704

Re: MTBF of RouterBOARD

UP! Mikrotik APs compliant with the wifi4eu minimum specs? As request from WiFi4EU 9.2.1 What are the technical requirements for the WiFi4EU Access Points? The technical specifications of the equipment are detailed in section 6.2.2 of the call text, as well as Article I.2 of Annex I of the Grant Agr...
by m4t7e0
Fri May 17, 2019 8:18 pm
Forum: Beginner Basics
Topic: DNS Who is primary?
Replies: 4
Views: 344

Re: DNS Who is primary?

You're right, you can't do it like this. You can check if the L7 hack could help you, i.e. you would remove 10.255.255.254 from "/ip dns" and you'd only redirect selected queries there with L7. Great Guide, but it doesent work before the hotspot authentication... UPDATE 19:29: i change the chain in...
by m4t7e0
Thu May 16, 2019 7:50 pm
Forum: Beginner Basics
Topic: DNS Who is primary?
Replies: 4
Views: 344

Re: DNS Who is primary?

Mixing resolvers like this doesn't work reliably. RouterOS starts with first server, moves to next one on failure and keeps using it until another failure, when it moves to next one again (or to first if it was on last). Proper solution would be either ability to add also static CNAME records, or s...
by m4t7e0
Thu May 16, 2019 12:54 pm
Forum: Beginner Basics
Topic: DNS Who is primary?
Replies: 4
Views: 344

DNS Who is primary?

Hi dear i have a question for all DNS Expert! For a temporany solution i have to CNAME a single domain for allow hotspot (and it redirect all 53 upd to isself before autentication) redirection to my own page. Unfortunatelly it can't be an "A" record. So i create my own DNS server as proxy of googled...
by m4t7e0
Tue May 07, 2019 5:59 pm
Forum: The Dude
Topic: Dude Take System system identity for device name
Replies: 14
Views: 4406

Re: Dude Take System system identity for device name

Displaying the device identity in RouterOS is not happening. The above instructions for Appearance only affect the Map diagram. How can the Device Identities be shown in the Device list under the RouterOS tab view? I would like this as well. The map can get a lot cluttered and we use the device lis...
by m4t7e0
Fri Feb 08, 2019 1:11 pm
Forum: General
Topic: Network diagram software?
Replies: 8
Views: 2219

Re: Network diagram software?

I will UP this post...
draw.io is a good solution, Dia, Google Draw, Network Notepad, Dude, Anyone Know one applucation that can simply match Newtork Monitoring and Network Draw, OpenSource,?
by m4t7e0
Mon Jan 07, 2019 6:20 pm
Forum: Beginner Basics
Topic: RBM11G - R11e-4G [B20 - Connection on BOOT]
Replies: 0
Views: 297

RBM11G - R11e-4G [B20 - Connection on BOOT]

Hi dear, i'm trying this two new prdocut:RBM11G with R11e-4G [long-term 6.42.10] in B42 LTE network, after some hour of tests with the not really good documentation (https://wiki.mikrotik.com/wiki/Manual:Interface/LTE), finally i've reached internet: /interface lte set [ find ] band=42 mac-address=0...
by m4t7e0
Thu Jan 03, 2019 1:30 pm
Forum: Announcements
Topic: Winbox vulnerability: please upgrade
Replies: 329
Views: 80381

Re: Winbox vulnerability: please upgrade

It has come to our attention that a rogue botnet is currently using the same vulnerability in the RouterOS Winbox service, that was patched in RouterOS v6.42.1 in April 23, 2018 . Since all RouterOS devices offer free upgrades with just two clicks, we urge you to upgrade your devices with the "Chec...
by m4t7e0
Thu Dec 20, 2018 4:19 pm
Forum: Beginner Basics
Topic: Strange UDP Packet to 81.198.87.240 [SOLVED]
Replies: 1
Views: 327

Strange UDP Packet to 81.198.87.240 [SOLVED]

My firewall report "strange" udp Packet outgoing src:5678 to 81.198.87.240:30000
81.198.87.240.JPG
Anyone know who is this IP and why ROS is sending packet to this host?
by m4t7e0
Thu Dec 20, 2018 3:46 pm
Forum: Beginner Basics
Topic: Etherboot RB951g-2HnD
Replies: 5
Views: 488

Re: Etherboot RB951g-2HnD

Try like this video guide https://www.youtube.com/watch?v=GIijZ6_i55g or try holding for more time (like 40 second after the power on)

if not try with other PC (in my case i used old computer with windows xp and only eth devce.
by m4t7e0
Thu Dec 20, 2018 3:43 pm
Forum: Beginner Basics
Topic: Unbrick 750GL - Help needed please
Replies: 3
Views: 351

Re: Unbrick 750GL - Help needed please

Which seguence are you using on the device? There is 2 Mode to boot in NetInstall mode. Trying factory defaults (push reset button for 20 second after it is swtiched on) after 5 minutes push the reset button for 60 second and wait 5 minutes Method 1 After this: Plug off Power Push and hold reset hol...
by m4t7e0
Thu Dec 20, 2018 12:57 pm
Forum: Beginner Basics
Topic: bank traffic by vpn
Replies: 1
Views: 218

Re: bank traffic by vpn

i can sent you my configuration for route the facebook traffic via VPN, just change it it for your preferred site: In this there is not configuration about VPN client -> Just do it! :X There is 3 simple step Adding address List Routing mark the Address list Route configuration Adding address List /i...
by m4t7e0
Thu Dec 20, 2018 12:48 pm
Forum: Beginner Basics
Topic: Port Forwarding from Web UI - mikROTIK HAP AC LITE TOWER
Replies: 1
Views: 228

Re: Port Forwarding from Web UI - mikROTIK HAP AC LITE TOWER

Please take a look to the WiKI. https://wiki.mikrotik.com/wiki/Manual:IP/Firewall/NAT I'm not sure about your request You have enabled PortForwarding in ISP Router:6881 to Raspberi Pi Port... But The networks are like: Case 1 ISP Router port 1 to Mkt port 1 ISP Router port 2 to Rapsberry Port or Cas...
by m4t7e0
Thu Dec 20, 2018 12:37 pm
Forum: Beginner Basics
Topic: VPN
Replies: 1
Views: 280

Re: VPN

You can try to use SSTP VPN or other VPN, actually which VPN is configured?
by m4t7e0
Thu Dec 20, 2018 12:34 pm
Forum: Beginner Basics
Topic: Unbrick 750GL - Help needed please
Replies: 3
Views: 351

Re: Unbrick 750GL - Help needed please

Close any other application,
disable any network interface leave enabled only ethernet.
by m4t7e0
Thu Dec 20, 2018 12:33 pm
Forum: Beginner Basics
Topic: LAN and internet in the same public range /27
Replies: 10
Views: 724

Re: LAN and internet in the same public range /27

You can configure the p2p to mikrotik and set the pubblic ip to customer, you want the mikrotik on internet or not? it mean you must use one of this pubblic ip address.
by m4t7e0
Thu Dec 20, 2018 12:10 pm
Forum: Beginner Basics
Topic: Winbox stuck logging in
Replies: 9
Views: 2461

Re: Winbox stuck logging in

try with net terminal:
/ip service set winbox port=8291 disabled=no 
if not try to export the configuration:
/export file=Backup.rsc
Copy the export to Backup.rsc to PC
Upgrade RoS
/system package update install
if not make support.rif and submit to support@mikrotik.com and factoryreset
by m4t7e0
Thu Dec 20, 2018 12:04 pm
Forum: Beginner Basics
Topic: Etherboot RB951g-2HnD
Replies: 5
Views: 488

Re: Etherboot RB951g-2HnD

For Net install:
Disable any network interface on the computer (leave actived only the network), and than follow the step on the WiKi... https://wiki.mikrotik.com/wiki/Manual:Netinstall
by m4t7e0
Thu Dec 20, 2018 12:01 pm
Forum: Beginner Basics
Topic: Internet works on the lan side but not on the router itself. [SOLVED]
Replies: 2
Views: 339

Re: Internet works on the lan side but not on the router itself. [SOLVED]

Not sure about network schema, bu try this: Example: /ip address add address=172.16.1.10/30 comment="ISP Private IP" interface=ether1 network=172.16.1.8 Solution 1 - /ip firewall nat add action=src-nat chain=srcnat comment="NAT Private to Public" src-address=172.16.1.10 to-addresses=185.xxx.xxx.188 ...
by m4t7e0
Thu Dec 06, 2018 6:42 pm
Forum: Beginner Basics
Topic: Route all traffic through NordVPN?
Replies: 19
Views: 8143

Re: Route all traffic through NordVPN?

Hello, I am new to MikroTik and bought a Mikrotik hAP Lite Intern (RB941-2nD) and would like to configure the following: The router is behind a firewall I have no access to. To use VPN I have to use Port 443 and TCP. Hi dear, i'm so sorry i forgot about USING TCP 443 Port, the only avaiable VPN i t...
by m4t7e0
Thu Nov 22, 2018 3:35 pm
Forum: RouterOS v7
Topic: Feature request: Virtual Extensible LAN (VXLAN)
Replies: 27
Views: 10424

Re: Feature request: Virtual Extensible LAN (VXLAN)

+1 is a MUST
by m4t7e0
Wed Nov 21, 2018 8:20 pm
Forum: Beginner Basics
Topic: Fast failover
Replies: 4
Views: 477

Re: Fast failover

Your wan is PPP or a is behind a NAT ? Please also send a traceroute to 8.8.8.8 for each WAN interface
by m4t7e0
Wed Nov 21, 2018 8:04 pm
Forum: Beginner Basics
Topic: Bridge Filter works on independent vlan ?
Replies: 5
Views: 342

Re: Bridge Filter works on independent vlan ?

Did you check the wiki? [https://wiki.mikrotik.com/wiki/Manual:VLANs_on_Wireless]
if yes i can see the configuration
by m4t7e0
Wed Nov 21, 2018 7:38 pm
Forum: Beginner Basics
Topic: How to route torrents traffic bypassing vpn?
Replies: 3
Views: 466

Re: How to route torrents traffic bypassing vpn?

I think you also need to masquerate the the vpn traffic
by m4t7e0
Wed Nov 21, 2018 7:30 pm
Forum: Beginner Basics
Topic: Route all traffic through NordVPN?
Replies: 19
Views: 8143

Re: Route all traffic through NordVPN?

Hi, yes is possible, first step is setup your openVPN VPN you know hot to do it? Plese Read https://support.nordvpn.com/#/Connectivity/Router/1136267512/Mikrotik-Setup.htm than you can simple make a prerouting "NordVPN route" mangle rules with for all the traffic that you want to route on NordVPN an...
by m4t7e0
Tue Nov 20, 2018 7:23 pm
Forum: General
Topic: Hotspot VLANs
Replies: 44
Views: 11477

Re: Hotspot VLANs

Why better? Could you explain?
vlan is a way for isolate different networks, bridge is the opposit situation, why you would to brigdge if your scope is isolate every network?
by m4t7e0
Tue Nov 20, 2018 7:14 pm
Forum: Beginner Basics
Topic: Load balancing 2 WAN link on Mikrotik Router OS V6.41+
Replies: 1
Views: 309

Re: Load balancing 2 WAN link on Mikrotik Router OS V6.41+

send also bridge / interface list shouldn't be a problem the change to new bridge feature
by m4t7e0
Tue Nov 20, 2018 7:02 pm
Forum: General
Topic: 1500 L3 MTU on a Mikrotik PPPoE Server
Replies: 4
Views: 552

Re: 1500 L3 MTU on a Mikrotik PPPoE Server

RIF WIFI: Typically, the largest Ethernet frame that can be transmitted without fragmentation is 1500 bytes. PPPoE adds another 6 bytes of overhead and PPP field adds two more bytes, leaving 1492 bytes for IP datagram. Therefore max PPPoE MRU and MTU values must not be larger than 1492. You are talk...
by m4t7e0
Tue Nov 20, 2018 7:01 pm
Forum: General
Topic: ISP Setup
Replies: 4
Views: 600

Re: ISP Setup

if you are interesse to some rb 10 36 contact me i found some discount
by m4t7e0
Tue Nov 20, 2018 6:45 pm
Forum: General
Topic: MikroTik Hotspot - Redirect to App
Replies: 1
Views: 256

Re: MikroTik Hotspot - Redirect to App

You can change the "landing-page url" but your request depends at 99% from the smartphone... iPhone CNA don't permit using app during the autentication stage...
by m4t7e0
Tue Nov 20, 2018 6:35 pm
Forum: General
Topic: hAP AC - slow eth speed to INET
Replies: 2
Views: 327

Re: hAP AC - slow eth speed to INET

you can use hw swtich instead the "bridge" or change the qos rules for single interface
by m4t7e0
Tue Nov 20, 2018 6:30 pm
Forum: General
Topic: 3 WAN PCC with LTE failover
Replies: 2
Views: 329

Re: 3 WAN PCC with LTE failover

can you export the configuration??
I think you should add the routing mark on route for each mangle rules with distance > the primary link
by m4t7e0
Tue Nov 20, 2018 6:28 pm
Forum: General
Topic: Hotspot VLANs
Replies: 44
Views: 11477

Re: Hotspot VLANs

I think is better to add a new hotspot for each vlans... of trunk port to cisco switch!
by m4t7e0
Tue Nov 20, 2018 6:21 pm
Forum: General
Topic: Force "Sign-in to WiFi network"
Replies: 20
Views: 20997

Re: Force "Sign-in to WiFi network"

Anyone ever got this to work? im facing the same exact issue. the captive portal wont load and the gstatic connectivity returns net::ERR_CONNECTION_RESET
probabily depends on https site..
Try to load an http site instead https.
by m4t7e0
Tue Nov 20, 2018 6:19 pm
Forum: Beginner Basics
Topic: PCC Load Balancing 2 WAN on Mikrotik HEX
Replies: 16
Views: 2314

Re: PCC Load Balancing 2 WAN on Mikrotik HEX

Hi ottoemezzo,
i suggest you to edit this parameter per-connection-classifier= both-addresses-and-ports with something different, using this paramenter can generate some problem with some site (like banks) that checks the pubblic ip of requests.
by m4t7e0
Fri Nov 16, 2018 5:19 pm
Forum: Beginner Basics
Topic: Routing via IPSec Tunnel
Replies: 4
Views: 455

Re: Routing via IPSec Tunnel

Waiting for your Network diagram / address, but probabily i think you miss the static route to each router.
by m4t7e0
Fri Nov 16, 2018 5:17 pm
Forum: Beginner Basics
Topic: PCC Load Balancing 2 WAN on Mikrotik HEX
Replies: 16
Views: 2314

Re: PCC Load Balancing 2 WAN on Mikrotik HEX

Ciao Ottoemezza!
can i take a lootk to your PCC Mangle Configuration?
Your mangle rules is getting traffics in stats?
by m4t7e0
Fri Nov 16, 2018 5:13 pm
Forum: Announcements
Topic: Future of LTE products, user feedback requested
Replies: 83
Views: 18137

Re: Future of LTE products, user feedback requested

Hi, i will bet interessed to try B42/43 CAT 12 - 16 with carrier aggregation. You have any compatible board? I just found the newest B42 CAT4 without CA.
by m4t7e0
Mon Jun 11, 2018 1:50 pm
Forum: Announcements
Topic: VPNfilter official statement
Replies: 191
Views: 74787

Re: VPNfilter official statement

Hi All, yesterday my Router RB750UPr2 with latest BugFix version was attached from something... Apparently just a DNS default server Change.. The device was opened to public ip *80 *8291 *21 *22 (i need to do leave it for see what this attack do to my router), so i get the first attack. After this c...
by m4t7e0
Thu Mar 29, 2018 5:41 pm
Forum: The Dude
Topic: Dude - Device RouterOS on no-standard Port
Replies: 25
Views: 8150

Re: Dude - Device RouterOS on no-standard Port

Actually from me, no news about it! :(
by m4t7e0
Thu Mar 15, 2018 8:32 pm
Forum: General
Topic: btest - Where Is
Replies: 7
Views: 41097

Re: btest - Where Is

Thanks for the package, anyone know why mikrotik hide it?
by m4t7e0
Thu Mar 15, 2018 7:24 pm
Forum: General
Topic: btest - Where Is
Replies: 7
Views: 41097

btest - Where Is

Hi dear,
i will try the btest application on windows, from the official site there is no exe.

Anyone know about the end of this software?
by m4t7e0
Sun Feb 18, 2018 12:12 pm
Forum: General
Topic: SSTP connection limits
Replies: 6
Views: 620

Re: SSTP connection limits

On the client unable to connect or sometime for few second it reach 201 and after some second some other old established vpn go down...
by m4t7e0
Sat Feb 17, 2018 8:09 pm
Forum: General
Topic: SSTP connection limits
Replies: 6
Views: 620

Re: SSTP connection limits

Yes, purchase higher level of license, L4 = 200, L5 = 500, L6 = unlimited, (Keep in mind which routerboard you have and resources available on it)

https://wiki.mikrotik.com/wiki/Manual:License
My routerboard is ccr1036 with l6.... Never see more than 201 connection
by m4t7e0
Thu Feb 08, 2018 8:45 am
Forum: Beginner Basics
Topic: How to netinstall protected-routerboot [SOLVED]
Replies: 5
Views: 986

Re: How to netinstall protected-routerboot [SOLVED]

According to the wiki, if you have enabled protected-bootloader mode you need to hold the reset button for a certain amount of time to restore the ability to netboot, though this will completely wipe the NAND including your config https://wiki.mikrotik.com/wiki/Manual:RouterBOARD_settings#Protected...
by m4t7e0
Thu Feb 08, 2018 8:41 am
Forum: RouterOS v6 RC and v7 BETA
Topic: USB over IP
Replies: 2
Views: 1135

Re: USB over IP

MikroTik experimented with USB over IP in the past, but it was scrapped before it was finished, see e.g.:

viewtopic.php?f=2&t=61297
viewtopic.php?f=1&t=61368
No future possibility?
by m4t7e0
Thu Feb 01, 2018 2:29 am
Forum: Beginner Basics
Topic: How to netinstall protected-routerboot [SOLVED]
Replies: 5
Views: 986

Re: How to netinstall protected-routerboot [SOLVED]

I'm having the same issue but Netinstall does not work. I tell netinstall to "Install" the packages but after i press install it sits there for about 10 seconds like its doing something then tells me the router is "Ready". It doesn't reboot or anything. But maybe your netinstall will work so for in...
by m4t7e0
Mon Jan 29, 2018 6:00 pm
Forum: Beginner Basics
Topic: How to netinstall protected-routerboot [SOLVED]
Replies: 5
Views: 986

How to netinstall protected-routerboot [SOLVED]

Hi Dear,
i have configured a "protected-routerboot enable" device, but i forgot about this option, and i have tryed to force netinstall via reset button and poweron the device.
Now the device reboot continuosly and is impossible to use it.
What i can do?
by m4t7e0
Sat Jan 27, 2018 11:22 pm
Forum: General
Topic: SSTP connection limits
Replies: 6
Views: 620

SSTP connection limits

Hi dear, someone have more than 200 sstp tunnel connected using ruoterboard as server?
  • 1
  • 2