System / logging. There you can add topic = wireless, debug. I've done that except I pump it out to a syslog server. Like the post I linked to I see no debug messages that expand on ... May 18 09:22:48 home.example.com wireless, info 8A:6C:79:05:FB:94@Voda2 disconnected, connection lost, signal str...

How do I enable debug messages for wireless events?

I seem to only get info messages.


Edit: Just saw this…. viewtopic.php?t=13748#p872195

There are pad inside, but never messed with them. If netinstall didn't work, kinda tells you getting serial port from pads may not help since it both need RouterBOOT to work. From what I read production RouterBOOT does not have the serial console enabled for devices that have internal pads. Netinst...

If you reset to defaults (press reset ~7 seconds while powering)... the Wi-Fi should appear and you can at least see how damaged it from that.

Tried. No Wi-Fi shows up.

Last firmware was 7.8. Does that change anything?

I have a wAP R ac that appears to have been damaged in a recent storm. Both ethernet ports are dead but the power/usr leds operate. I have seen out of warranty repair manuals for other mikrotik products. Is there a repair/troubleshooting manual for the wAP R ac? If not, is there any info about getti...

Had to reconfigure the card with AT+QCFG="usbnet",1 (from AT+QCFG="usbnet",2).

Now GPS behaves like ROS 6.

With ROS 6(long-term) I could get GPS data with modem init string (AT+QGPS=1) under the LTE interface.

This does not work for me with ROS 7.3.

Is this a known issue with ROS 7?

Hello, This device comes with an included thermal pad. https://help.mikrotik.com/docs/display/UM/wAP+R+ac I must of fitted it as it's not in the box. I'll have to check under the card. Antenna gain and other useful information you can find in brochure: https://i.mt.lv/cdn/product_files/wAP_ac_LTE_2...

Did the wap R ac always come with a LTE thermal pad?

And what is the gain of the lte antennas?

Yes, just like any other wireless connection. Router must be in wireless "Station" mode

Ok. Thank you.

Was trying today but must have been doing something wrong.

More use to sharing a wired connection wirelessly than the other way around.

Is possible to connect to an iPad wireless hotspot and share that connection over the LAN.

If so, are there any gotcha steps?

I have 2 Hap AC. Same routerOS version.

/interface wireless export orders the output differently between them.

Why?

I've just ordered one of the RS ones. Will give it a go and report back. I'm quietly confident it will work. From cable specs... http://www.ftdichip.com/Support/Documents/DataSheets/Cables/DS_USBNMC.pdf Based on back to back FTDI FT232RQ devices. From Mikrotik wiki... https://wiki.mikrotik.com/wiki...

Exactly.. Need to use a Null-Modem (F-F) serial cable. Same as if you were connecting two Mikrotik routers with serial ports together.

So something like this...

http://au.rs-online.com/web/p/interface ... s/0537420/

yes, RouterOS has supported USB-Serial adapters for quite some time.

How would you connect PC(usb) to Mikrotik(usb) to have console? What type of cable? It's like two usb-serial cables back to back.

have tested the proscend 180-T here in australia (NBN FTTN 50mb/20mb service) and works fine (using hAP ac / RB962).

https://forums.whirlpool.net.au/forum-r ... ?t=2671952

Please contact your favourite distributor and place an order, they will be able to allocate a unit as soon as they receive their stock. They are already placing orders now.

Will/are they certified for Australia?

In marketing terms how does the hAP AC compare to D-links etc?

I mean in terms of AC1900, AC3200 and so on.

The hAP AC is a 2 chain 2.4 Ghz and 3 chain 5 GHz router, so 2 x 150 + 3 x 433.3 = 1600 which would be AC1600

Or AC1750?

Is IPv6 operational in any of these OpenWRT images?

Have you enabled IP forwarding on the RPi?

http://www.ducea.com/2006/08/01/how-to- ... -in-linux/

How do I give out two TFTP server addresses with a option 150?

+100000

I need this feature too

$205 Pacific Peso's

http://shop.duxtel.com.au/product_info. ... cts_id=403

what for is ARP-published feature

Proxy-Arp.

Lots of info on the web.

In marketing terms how does the hAP AC compare to D-links etc?

I mean in terms of AC1900, AC3200 and so on.