Community discussions

MikroTik App

Search found 15 matches

by rohaantje
Mon Feb 22, 2016 9:51 pm
Forum: General
Topic: IPV6 internal configuration
Replies: 64
Views: 10895

Re: IPV6 internal configuration

MAke sure this is in IPv6 > routes dst=::/0 gateway=2001:db8:1234:5678::1 (put the HE.net end of the WAN /64 instead of my example IP) It is. That's why i'm confused. Everything is like the way is should. I've read 10 or 20 guides and they all say the same. But i won't work for me. Flags: X - disab...
by rohaantje
Mon Feb 22, 2016 1:29 pm
Forum: General
Topic: IPV6 internal configuration
Replies: 64
Views: 10895

Re: IPV6 internal configuration

If client says there's no route, it probably does not have it. Check the routing table ("netsh interface ipv6 show route" for Windows, "ip -6 route" for Linux). And you also have to enable some forwarding in router's firewall. Now you accept established and related connections, but there won't be a...
by rohaantje
Fri Feb 19, 2016 3:52 pm
Forum: General
Topic: IPV6 internal configuration
Replies: 64
Views: 10895

Re: IPV6 internal configuration

I've also tried to make a ipv6 network. I've got a lot working but not everything. All my hosts can get a ipv6 addres form my router. My router has a 6to4 config from where i can ping 'external' adresses. But it goes wrong on the route from my 'local' network to the 'external' network. When i ping f...
by rohaantje
Thu Feb 04, 2016 6:51 pm
Forum: Wireless Networking
Topic: CAPsMAN frequency range feature
Replies: 3
Views: 1630

CAPsMAN frequency range feature

Hi, I've a feature request for CAPsMAN. I really like the auto frequency options in CAPsMAN for the 2,4ghz range. But i like it a bit less in the 5ghz range. This is because of the following. Right now i've a hAP ac lite EU version. This device supports 5150MHz - 5875MHz. In the netherlands there ar...
by rohaantje
Wed Feb 03, 2016 2:31 pm
Forum: RouterBOARD hardware
Topic: QRT 5 ac
Replies: 10
Views: 2748

Re: QRT 5 ac

Check the length and quality of cable between your devices.
by rohaantje
Wed Dec 02, 2015 4:48 pm
Forum: Beginner Basics
Topic: IPv6 6to4 tunnel with PPPoE(v4)
Replies: 0
Views: 835

IPv6 6to4 tunnel with PPPoE(v4)

hi guys, i can't mannage to get my hurricane electric ipv4 to ipv6 tunnel working. I've copyed the code of their website. Which didn't work. i've added and changed a few things but i won't run. I've the following settings: /interface pppoe-client add ac-name="XX" add-default-route=yes comment="IPv4 ...
by rohaantje
Mon Oct 05, 2015 6:00 pm
Forum: RouterBOARD hardware
Topic: RB3011 Block diagram?
Replies: 230
Views: 56041

Re: RB3011 Block diagram?

A russian webshop has the RB3011 in preorder here:
http://www.lanmart.ru/mikrotik-rb3011uias-2hnd-in.html

It's the version with a 2 GHz wireless card.

If i'm correct they sell it for 8662 RUB witch is approximately €120,-
by rohaantje
Mon Oct 05, 2015 5:48 pm
Forum: RouterBOARD hardware
Topic: HAP AC
Replies: 540
Views: 148092

Re: HAP AC

I dont understand why hAP AC will have only 160 mW output power? Why reduce the output power from 1000 mw to 160? Also CPU is only 650 Mhz, that is too poor for this time we live.. Normis, why you dont make hAP AC with 1000 mW Wireless power like 951Ui, 951G and RB2011UiAS?? where did you see that?...
by rohaantje
Fri Sep 04, 2015 4:04 pm
Forum: RouterBOARD hardware
Topic: New Routerboard sector antenna/device
Replies: 31
Views: 4995

New Routerboard sector antenna/device

Are these to-be-released sector antennas from mikrotik??
If so, Very good idea :D
Capture.JPG
by rohaantje
Fri Sep 04, 2015 4:00 pm
Forum: RouterBOARD hardware
Topic: hAP lite housing
Replies: 21
Views: 4812

Re: hAP lite housing

It would be nice for mikrotik to make a difference between consumer grade and professional grade. This could be possible by making 2 specific cases. The white rackmount CCR en CRS are the proffesional gear. The new hAP lite design for All the consumergrade gear. And why all the new names for the Rou...
by rohaantje
Mon Aug 31, 2015 6:27 pm
Forum: General
Topic: PPPoE failed to authenticate
Replies: 0
Views: 1418

PPPoE failed to authenticate

Hi, I've the following problem. I've a wireless internet connection to a 'local' ISP. This wireless internet connection is made with a mikrotik SEXTANT G 5HPnD which is in bridge mode. They're using PPPoE to give the IP's. My own RB2011 which is connected tho the receiving sextant is the PPPoE clien...
by rohaantje
Tue Aug 18, 2015 3:46 pm
Forum: Beginner Basics
Topic: vlan's confused
Replies: 2
Views: 943

Re: vlan's confused

Thanx, i'm gonna try it.
by rohaantje
Tue Aug 18, 2015 12:12 pm
Forum: Beginner Basics
Topic: vlan's confused
Replies: 2
Views: 943

vlan's confused

hey guys, I'm a bit stuck on the vlan's in RouterOS. My experience with vlan's isn't that big so maybe it is just my disunderstanding. But this is the situation i want to create. Right now i've a temporary situation with bridges. Untitled.png The RB2011 is my main router. Port 1 is WAN with external...
by rohaantje
Thu Jun 18, 2015 9:57 pm
Forum: General
Topic: CAPsMAN_v2 and Wireless printer
Replies: 1
Views: 996

Re: CAPsMAN_v2 and Wireless printer

i've already found the problem.
Client-to-client option was no enabled in datapaths.
Which i think is weird but okay..
by rohaantje
Mon Jun 15, 2015 10:53 pm
Forum: General
Topic: CAPsMAN_v2 and Wireless printer
Replies: 1
Views: 996

CAPsMAN_v2 and Wireless printer

Hey guys, The last few months i've ugraded my homenetwork with different wireless AP's controlled by CAPsMAN V2. Today i came across a weird problem. My printer lost connection so i had te re-add it. It is a Samsung SCX-3405W wireless printer. But when i searched it via wifi i could't find it. But w...