MikroTik

krafg

With stable 7.16 release all fine?

Regards.

krafg

The latest:

Regards.

krafg

Try with 7.15.0 I have no issues with LtAP that is very similar.

Regards.

krafg

Please add tabs inside the interfaces, or add a feature that WinBox remembers which drop downs are shown.

krafg

It will works well. Tested on RBM33G and LtAP.

Regards.

krafg

Not the LtAP mini itself. The mobile card is who needs 2 cables with dual connector antenna to operate properly.

Regards.

krafg

As I know LtAP is designed to run 24/7. In my case I reach ambient temperatures of 36°C and still works without issues during 4 years.

Regards.

krafg

2. EDIT: I forgot to mention that I prefer having the "Detach Window" button directly on the window's title bar like in the red triangle below. The space with the orange cross is just taking up unnecessary room and should be removed, moved, or at least be controllable through settings. De...

krafg

- Zoom level: 84% - looks great. Tried 100, 92, 84 & 75. 84% looks best in my opinion. Didn't have any issues with icons, text, or layout in either of the zoom levels. Thanks a lot. Worked flawlessly to me and i'm totally agree. Updated Winbox config of my LtAP: https://i.imgur.com/G1Z7RWy.png ...

krafg

This is GOD. I love it. Finally something good. Thanks a lot.

Only a question: There is a way to hide the right panel of actions?

An example of my LtAP:

Thanks again and regards.

krafg

Netmetal AC2 or Netmetal AX

Regards.

krafg

I have 2 units. No beep.

Regards.

krafg

Seriously? So... I'm starting to consider Ubiquiti for all Wi-Fi solutions instead of MikroTik, and for LTE, NR specifically maybe I will go back to Teltonika.

Thanks for the feedback.

Regards.

krafg

Check voltage with a multimeter. If values not match, open a ticket on MikroTik Support page.

Regards.

krafg

Can you send a photo of your device? As I said. R11e-LTE is only a interface card, not the router itself. Various models uses the same card, I can't know what router are you using.

Which architecture are you chosen when downloaded NPK file?

Regards.

krafg

1. R11e-LTE it's the LTE interface card, not router itself. Best especify your router model.
2. Next time, always do upgrading using batteries/UPS.
3. Explain now do you do NetInstall process detailed.

Regards.

krafg

Maybe is a RouterOS bug, what version are you using?

Regards.

krafg

Maybe on a couple of years more, will we have an outdoor 5G solution, or when 6G will be released. I don't expect outdoor 5G device soon.

Regards.

krafg

I not know, simply try that.

Regards.

krafg

Finally output power published. 27dBm for 2.4Ghz and 28dBm for 5Ghz. I expected 30dBm.

Regards.

krafg

Remove LTE card and clean the pins with isopropyl alcohol.

krafg

Upgraded without issues.

Thanks and regards.

krafg

And no info about radio power...

krafg

My only question is Wi-Fi power. I can't find if is still 30dbm.

Regards.

krafg

LtAP is just the router. You need specify the LTE card that you are using.

Regards.

krafg

https://es.aliexpress.com/item/10050030 ... pt=glo2esp

This is the adapter?

Thanks and regards.

krafg

Yes, it fixed, now the question is why on all my devices I have a loopback interface?
It was always there but hidden, now is exposed. Use cases for it are many and discussed plenty in previous page and in other topics

Thanks for response.

Regards.

krafg

What's new in 7.14.1 (2024-Mar-08 14:50):
*) lte - fixed R11e-LTE-US modem dial-up;

Yes, it fixed, now the question is why on all my devices I have a loopback interface?

Thanks and regards.

krafg

As I know, the triple antenna is only to get more throughput, not more coverage, so it uses MIMO technology. The newest NetMetal (AC2) should be better thanks to AC technology and reach better speed at same coverage. Anyway if your drone only have 2 internal antennas, it never will use the 3 antenna...

krafg

For reference only: I power 2 BaseBoxes + 1 LtAP + 1 Bullet AC.

All works well.

Regards.

krafg

My R11e-LTE-US keeps on boot loop. I Can't upgrade to this version. This version creates a weird loopback interface that keeps running but LTE2 never boots up. Downgrading to 7.13.5 problem solved. LTE firmware is up to date on both LTE interfaces and RouterBOARD firmware keeps on 7.13.5 on all devi...

krafg

Simply use the same device but as CPE.

Regards.

krafg

[Off topic] When I tried Wazuh (and OSSEC), I always believed that it was with agent only. I liked but I saw that the agent on Windows is super easy to vulnerate. Simply uninstalling or turning off the service is enough and no have any protection. I not know if I did something wrong, but anyway unti...

krafg

Quick question: BTH will be compatible with LtAP + LTE connection behind NAT?

Thanks ans regards.

krafg

If ETH not turns on, your device is broken.

Regards.

krafg

HP being HP.

krafg

Thanks for the info. No idea of that.

Regards.

krafg

Updated all my devices without issues.

Regards.

krafg

On these cases best is open a ticket support directly with Mikrotik support, probably they will share some instructions to do the upgrade by USB and offline.

Regards.

krafg

This is not normal:

I think that it's a faulty unit, so you need RMA or buy another new router and replace it.

Regards.

krafg

And PowerBox Pro support 48v power supply. So, you can buy a 48POW and use it if your system is compatible with 48v.

Regards.

krafg

Can you use the console port?

Regards.

krafg

Using compatible cables is also important.

My combo is: Trendnet TU-S9 + TrippLite P450-006.
Software: Xshell Personal Edition (free).

Regards.

krafg

https://youtu.be/HWP8sqdilmM?si=wN7gUGnZmR84lylO

There is an example of MikroTik LTE with external antennas. (1:27)

As you can see, LtAP is an outdoor unit but you can also install it for indoor, it's a very small device.

Regards.

krafg

If resting to defaults the problem persists and if holvoetn discarted possibly ROS issue, the only way may be a hardware issue. RMA or buy a new one.

Regards.

krafg

Sorry but actually DSL technology is obsolete.

Regards.

krafg

Remove the bridge and create it again.

Regards.

krafg

There is the complete config? I can't see rules, addresses, etc.

Regards.

krafg

Please know that this only will work if you have on your WAN interface the public IP address and if you aren't behind of CG-NAT. If this is not your case, so you need some VPN with relay servers like ZeroTier One, Tailscale, Twingate, etc and the config mentioned is not needed, the VPN will do all t...

krafg

I think that it's a hardware problem. It's not normal that LTE interface dissapears.

Regards.

krafg

If the suspension was due to spoilers, that's clear, but I agree that it's an exaggeration to suspend an account for this, since basically it's only reporting the models of future products, which although they say something, they don't It is not decisive enough to affect the products already on sale...

krafg

Yes I used ZeroTier on my Raspberry Pi, so, I not have any ARM based MikroTik device. The problem is that ZeroTier sometimes shows my Raspberry as connected but can't get any traffic and I need restart the ZeroTier service to fix it. I switched to Tailscale but on some Raspberry Pi boots, Tailscale ...

krafg

I not know about this, but 2 suggestions:

1. Try with dirrerent ROS versions.
2. "UEFI hard disk" can't be changed to legacy and try it?

Regards.

krafg

Normally you need some VPN. Actually I use Twingate with a Raspberry Pi. Works really well.

Regards.

krafg

See the logs if you see something weird/suspect.

Regards.

krafg

Simply remove the default bridge and put the IP of each interface (2 to 10) and create the respective DHCP server on each interface to get IP.

Regards.

krafg

Of course you need a ROS7 with ARM based CPU device as core. Very important.

Regards.

krafg

Paste your config using export command.

Regards.

krafg

I'm not expecting more cheaper 5G devices. I'm waiting for outdoor 5G devices, please!

Regards.

krafg

There is a description of GPIO's pinout.

You need some voltage + GND depending of the fan you will install.

Probably you can use Pin 4 to positive and Pin 6 to negative using a 5v fan.

Regards.

krafg

I understand your point, and it's an interesting question, so, in case that the answer would will be it's to make sure that nothing will break, it seems to be more like than "beta" instead of something "stable", in my opinion. ROS 6 has been turned a bit weird, and the problem it...

krafg

Actually ROS6 is like the long-term version.

Regards.

krafg

Sorry I can't understand at all, can you provide an example?

Sometimes I use something called layer7 to filter some pages and drop them.

Regards.

krafg

I suggest open a ticket directly with MikroTik support.

Regards.

krafg

You have masquerade rule from NAT tab on firewall?

Best is you paste your config using export.

Regards.

krafg

Here you can find some info: viewtopic.php?p=1016691

Make sure to read the brochure downloadable from product page.

Regards.

krafg

I know that RBM33G have a M.2 slot, but it is for storage.

Regards.

krafg

He said "connect", so, I'm assuming that you want to connect a fan. The question is what voltage can support the board and where you can connect it if is supported.

Regards.

krafg

Updated all my devices successfully. For now all is working fine.

Regards.

krafg

Thanks for clarification, I never worked with MMCX connectors, so, I can't help you.

Regards.

krafg

What is the condition?

krafg

I have 4 cards and all uses U.FL connectors.

Now it's for LTE. By other hand, I know that are some WiFi modules that "no one today" uses, that are bigger connectors called MMCX. If your card is for WiFi and not LTE, most probably it uses MMCX.

Regards.

krafg

R11e cards uses U.FL connectors for antennas.

Regards.

krafg

This is about Webfig?

Regards.

krafg

Yes, but not all cards are compatible.

Regards.

krafg

So you can add some endpoint/XDR solution.

Anyway would be great that MikroTik offers some solution to this.

Regards.

krafg

If the most powerful MikroTik device can't manage the traffic that you want with the config that you want because his power isn't enough, maybe is the only way to think on use a regular PC as router.

Regards.

krafg

ROS version?

Regards.

krafg

As I know, ATL doesn't have a mini PCI-e slot to insert any card. EG18 it's a soldered chip on PCB.

Regards.

krafg

Yes it's possible replace that LTE module.

But is sad to see how MikroTik discontinued product without a replacement like on this case.

On my case is the same with Band 4. R11e-LTE-US discontinued but no replacement by MikroTik.

Regards.

krafg

The signal strength/quality is important but also important is how much overloaded is the tower that you are connecting. Sadly this last you can't see it.

Normally at 3-4 AM on week days you can discard this and evaluate the relationship between both things.

Regards.

krafg

So, why you made great devices like LtAP or LtAP mini with MIPS architecture instead of ARM? There is a plan to launch something like it with ARM architecture?

krafg

This have 128MB of storage that it's a lot, try to copy all your files to your desktop, delete from router, apply update and finally re-upload the files to the router.

Regards.

krafg

So you can see it on interface list, simply check "R" for running connection. Why you need check it on Quickset window? Regards. Since the quickset has a reconnect button and I need to reconnect to test something, it's more convenient to have that button. Anyway you can do check the statu...

krafg

For now you only have two options: Webfig or Winbox + Wine.

Regards.

krafg

If you need update manually, contact directly with MikroTik support opening a ticket and they probably will provide to you the firmware, tools and instructions to do the process. You need and mini PCI-e to USB adapter to do that. Something like this: https://m.media-amazon.com/images/I/41g95cy3PQS._...

krafg

... Cry or laugh? Best laugh...
Thanks for the info rextended.

krafg

True, but in my case none of ISP's of my country provides IPv6 address for LTE. Anyway for people that applies this, it can helps. Good point.

Regards.

krafg

For something like GUI, I recommend to you use an application called Winbox. You can download it from official website absolutely free. For routes: IP -> Routes And clic on + icon to add the routes that you want. Simple. For VLAN: Add a VLAN interface on Interface window also with + icon For IP: To ...

krafg

He is using stable channel. When I upgraded to ROS7 I'm also used 6.49.8 and the only "solution" is upgrading to ROS 7 because it's logic. Actual ROS 7.10.2 is newer than 6.49.8, but you can't upgrade by assistant because I think for kernel version changes and you need update manually. It'...

krafg

New version available is ROS 7. To update to ROS 7 you need it manually dragging and dropping inside Winbox the NPK file downloaded previously for the architecture of your device.

Regards.

krafg

Signal strength? ROS version? Upgraded LTE firmware?

Regards.

krafg

not to your home. FROM your home. that's the idea

Phone ------> [CHR server] <------- Home behind NAT

And there are some free service to alocate CHR on cloud that can recommend?

Thanks and regards.

krafg

You can already make a Wireguard connection to your CHR from the home router, and then make a Wireguard VPN from your phone to the same CHR. This way you can achieve the same result without custom "relay". I can't open any port on my home router and always I get 10.x.x.x IP segment from m...

krafg

I never worked with IPv6 but anyway you can add it. And of course, add these rule only is usefull if your ISP provides to you IPv6 address.

Regards.

krafg

Thanks for response.

We wait...

Regards.

krafg

Oh, thanks for clarification Jotne and holvoetn, so, only waiting for BTH compatible with MIPS.

Regards.

krafg

Can we get answer on the xMIPSx situation with BTH? That really is where BTH be more useful. e.g. I used ZeroTier to enable BTH to test it – so really didn't need BTH since I already had ZeroTier. On xMIPSx, there are no options for a VPN from a CGNAT to a CGNAT, without building your own VPN hub. ...

krafg

As always mipsbe and mmips are forgotten. :(

For now my only alternative is using Raspberry Pi and/or x86 machines with some Linux.

krafg

No way for now.

krafg

LtAP it's really great device, but if you installed on a sailboat, obviously the internal tiny antenna is not enough to receive well the signal. I suggest use external antenna for better results. To this you need install inside U.FL to SMA or U.FL to RP-SMA pigtails. Then use another external pigtai...

krafg

Anyway it's no sense use vlan filtering while you are not using vlans.

What says profile tool?

Regards.

krafg

Sometimes when you try to login using MAC on WinBox, virtual interfaces causes problems (like VPN's, Hypervisors, etc). Try to disable all on your computer except your physical Ethernet connection.

Regards.

krafg

What LTE interface are you using? How good is your signal? Are you sure that your APN is correctly configured?

Regards.

krafg

Congratulations and thanks for this really useful piece.

Regards.

krafg

Use tools -> profile to see where comes the consumption.

And no, it's not normal.

What ROS are you running? Posting config also can help.

Regards.

krafg

You tried passthrough LTE interface on LtAP?

With this you should get ISP address directly on your CCR.

Regards.

krafg

Truly dissapointing. Another CAT6 without Band 4. More of the same. We need something that works with tons of bands, something "universal". hAP itself sounds good, but LTE... Not really. It's not important to me if I need pay handreds and handreds of dollars for an really complete LTE devi...

krafg

MMCX and U.FL are not the same.

And sorry for my mistake. I think on LTE instead Wi-Fi.

Can confirm that antenna is selectable:

Make sure that use pigtails that are MMCX to RP-SMA, don't buy U.FL, they are used on this case for LTE interfaces.

Regards.

krafg

https://mikrotik.com/product/48v2a96w

krafg

If SIMs fails it's due bad quality or bad manipulation. I still use same SIM card from 2017 on my MK and 2015 on my smartphone. It's simple, use 2 LHG + some additional router like hEX or another one for fail over, load balancing or what you want, or use LtAP with good directional external antennas....

krafg

Thanks for all info. I have EVE-NG lab under VMware Workstation and yet only played with ROS6 without much problems.

I have a P1 license reserved to play with another machine using ROS7 for future.

Regards.

krafg

What ros version?

krafg

So you can see it on interface list, simply check "R" for running connection.

Why you need check it on Quickset window?

Regards.

krafg

If you use separated frequencies (distanced channels) not should be a problem.

Regards.

krafg

It's normal that a lot space is used because it's RouterOS installed on your device. So you can't see these files for security reasons.

Regards.

krafg

Good luck. I suggest to you contact directly with MikroTik support for that.

Regards.

krafg

It is an idea and 10 minutes playing in the Gimp with picture of L009

Wow really nice. Congratulations! and thanks for clarification.

Regards.

krafg

Where he said that ISP device it's limited by Ethernet ports (10/100)? Anyway if ISP supplies 200 Mbps and device is limited by 100, it's scam, so it's illegal. Anyway if on future client would will have 600 Mbps instead 200 from ISP, in case that probably will can be, is correct thinking to install...

krafg

I hope that with new mods this is getting good results. Congratulations.

krafg

I never had problems resolving DNS using Capsman:

I not know what is but something in your config should be bad.

Regards.

krafg

I know that L009 is red and RB5009 is black, so it's a concept or I'm lost?

Regards.

krafg

Maybe you have tons of 5Ghz signals producing interference. Try to set manually the channel and changing one by one and do the speed tests. Anyway if you want good speeds never choose "Lite version". Instead use AC3 or AX no lite versions. Also speed will be depend of final device (noteboo...

krafg

On your DHCP server setup put your router as DNS server and on IP -> DNS -> Static, put your rule.

Regards.

krafg

You need set your LTE device on passthrough mode to get your ISP address on your hAP AC2. Simply make sure that the route distance is bigger than 1. I assume that this can be configured on LTE device also. Simply make sure that LTE device it's a MikroTik device.

Regards.

krafg

For this is that I never recommend using different brands between Router/Switch and SFP module. Most probably is that is not compatible and I recommend to you open a ticket directly with MikroTik support if they can add support for a future RouterOS version. Next time buy a MikroTik SFP module and f...

krafg

Simply reset configurations and make sure that file list is empty.

Regards.

krafg

We waiting for outdoor AX/5G devices.

Regards.

krafg

Anyway this model is for external LTE antenna. If it not shows antenna selection, maybe it uses both simultaneously.

Regards.

krafg

If you read Brochure, it says that these connectors are for an external LTE antenna. So you should connect MIMO 2x2 external 700-2700 Mhz antenna.

Regards.

krafg

I agree. Try NetInstall.

Regards.

krafg

I have LtAP unit and I can say that you can't select antena indoor/outdoor by config. LtAP comes with a little antenna inside and R11e-LTE6 module is connected to it. If you want to use external antenna, you need open LtAP, disconnect the internal antenna and connect some pigtails U.FL to SMA or U.F...

krafg

But it's for SXTsq, not SXT. They are different.

Regards.

krafg

Ok, this model is different. And if you put it on Netinstall mode and try to plug in on different ports, no change?

Regards.

krafg

I never saw a L009 yet, but most probably is that it uses RP-SMA.

Regards.

krafg

Unplug your router of power. Then, plug the router and all leds should turn on. If you see that keeps off, it's dead.

Regards.

krafg

If you don't use VPN's probably it will safe. I upgraded my LtAP from 6.49.8 to 7.10 and other devices with very simple config and all it's fine.

Regards.

krafg

Try to put NPK file into Winbox but not inside of file window.

Regards.

krafg

Works but breaks all other Windows apps.

Regards.

krafg

The first and most important question is: I'm behind a NAT by my ISP?

To check it, do a trace to your public IP address, if you get more than 1 hop, most probably you are behind a NAT. If you are behind a NAT by your ISP, DST-NAT will not works.

Regards.

krafg

If you need firewall on Mikrotik it need works as Router, not switch. What I whould do? I call to the ISP and I ask if is possible to put the existing gateway as bridge mode. Then all I manage using Mikrotik (DHCP, firewall, WAN connection, etc.) RB750 not comes with Wi-FI, so add an access point so...

krafg

https://help.mikrotik.com/docs/display/ ... tion+Group

All CRS3xx, CRS5xx series switches, and CCR2116, CCR2216 devices can be configured with MLAG using RouterOS version 7.

RB5009 seems to be not compatible.

Regards.

krafg

Sure, the point is in terms of what you want combine with WAN's, Connections or Bandwith . Normally people think in bandwith and here is when people believes that Load Balancing is for that, when for that is bonding and all these people hits with a wall. Other people believes that configuring one si...

krafg

Who is the client and who is the server?

Regards.

krafg

It's clear. Replace the button or buy a new hEX. If you replace, use the most tiny as possible.

Regards.

krafg

I'm assuming that you are using private IP class C (192.168.X.X), so, 107.1 and 107.27 would be: 192.168. 107.1 and 192.168. 107.27 using /24 netmask (255.255.255.0) If i'm right my question is where is your end device (PC, MAC, smartphone, etc.)? If I understood, R1 gives an IP address to R2 by DHC...

krafg

By I know, all LTE connections are NATed by ISP internally, so, you can't control that. You can "open" ports on Mikortik, but your ISP will block these connections for obviously security reasons by I know. You need a completely bridged public IP directly on your MK interface without any NA...

krafg

Use your LTE connection with higher distance route to establish your Ether1 as main WAN. With this all the traffic included the Chateau itself, would be go for Ether1.

Regards.

krafg

He is using ROS 7.10 and is a known issue that is fixed on 7.10.1 theorically.

Regards.

krafg

You can use Netwatch for this. It's a lot more easy.

Regards.

krafg

Latest version (ROS 7.10.1) have some fixes with time on webfig.

Try to update, probably will fix it.

Regards.

krafg

If you need more hands, not problem to me. Would be glad to contribute to this forum.

Regards.

krafg

You can't do load bonding but yes load balancing , but doing load balancing not means that you combine all different ISP bandwith , only do balancing in terms of connections between diferent ISP. But is true that on connections that are multiple and simultaneously you can "combine" all the...

krafg

As I know, LHG LTE18 hasn't a mimi pci-e slot to insert any card.

Regards.

krafg

@fischerdouglas Thanks for the info. Sadly in my case is true that I have an Ubiquiti device, but it's a Bullet AC and this is not compatible from what i know. The only device that I have is a RaspberryPi, but for now I'm using another solution, not ZeroTier. For now I put the link for RaspberryPi w...

krafg

I see that some people have troubles with DNS and VPN's, but it is not a enought reason to not update to latest version of ROS for all users. In my case both things I manage on a Raspberry Pi and for it I not have troubles for now.

Regards.

krafg

Anyway, now there is the stable version. I updated to it without issues from ROS6.

Regards.

krafg

Upgraded all my devices from ROS6. My first time with ROS7. For now all is working flawlessly.

LtAP, PowerBox Pro, BaseBox 2 and BaseBox 5.

Regards.

krafg

Should be temporary.

Regards.

krafg

Discord. I will enter NOW! Thanks for it. 🤩

krafg

Anyone else having issue with the date/time settings after upgrade?
My was 12h off. I had to manually set my time.
Then Enabled SNTP and added se.pool.ntp.org as servers.

I not noticed that. All is working fine.

Regards.

krafg

Thanks for this update.

Upgraded successfully all my devices.

Regards.

krafg

ROS6 will be patched also?

Regards.

krafg

I'm also waiting for more flexible solutions and yes, specially outdoor solutions. For now only we have Chateau 5G.

For 39Ghz none of the actual Mikrotik devices will be compatible. Needs more CPU power maybe and another antenna structure for these frecuency.

Regards

krafg

What ROS version are you using?

Send export of your capsman server and your wireless devices.

Regards.

krafg

Done. Thanks.

krafg

This is the official products page: https://mikrotik.com/products/group/lte-5g-products

As you can see, Chateau is the only device with 5G for now. I'm still waiting for outdoor directional 5G product.

Regards.

krafg

Thanks for the info about ROSv7 mkx. So for now I will keep safe.

Regards.

krafg

Change it for a more powerful device.

Regards.

krafg

As an aide to debugging ... it is possible to run wireshark on same interface. It then shows pretty clearly if/when RB starts with etherbooting procedure (it starts emitting bootp requests whuch are initially pretty similar to DHCP client requests).

Thanks a lot for this info.

Regards.

krafg

So, for now you can't downgrade to ROS6 while Mikrotik solves the problem?

I recommend to you open a ticket about it with Mikrotik support.

Regards.

krafg

I'm not sure if IP range affects, but I always use 192.168.88.x still having different IP range configured on RouterBoard.

The second tip is have enabled only the interface that you will use for Netinstall.

You tried using Netinstall under Windows machine?

Regards.

krafg

Most probably is that I'd not beeping it is bricked for some unknown reason. Try use netinstall.

https://wiki.mikrotik.com/wiki/Manual:Netinstall

Regards.

krafg

Check that during NetInstall you not have any interface on in your computer except the Ethernet that you are using for Netinstall. It helps that NetInstall works. Also try with all ports on your hAP.

Regards.

krafg

If you need GPS + LTE, LtAP is for you.

Check my personal network here.

Regards.

krafg

I know that cat 18 modem is embedded and not replaceable. For now there isn't cat 18 modem minipci-e from Mikrotik. For now 2 options: 1. Wait... Also see future 5G outdoor solutions. Maybe will be best than LHG18. 2. Replace your actual LHG and buy LHG18. If you see LHG18 uses a Quectel LTE-A EG18 ...

krafg

+1 for documentation. It is truly helpfully for troubleshooting.

Regards.

krafg

Most probably you need a switch for indoors.

Best is use CRS328-24P-4S+RM and it's ready for future requierements with or without PoE.

I know that for now is truly overkill, but on future maybe not.

Regards.

krafg

Why do you need use TFTP?

This is old and Mikrotik uses different solutions:

Winbox or webfig if you need update RouterOS.
Netinstall if you need recover a "bricked" RouterBoard.

Regards.

krafg

Best wait for LHG 5G version. I'm also waiting for it.

Regards.

krafg

First check your CPU temperature and see that is under 60°C. Then simply try it. With new frequency check system stability and temperatures again. For system stability you can do bandwidth tests with multiple computers using Btest server + Mikrotik Bandwidth APP for Windows. Check temperatures while...

krafg

Compatible with ROS6. ROS7 not tested. :local status [/interface lte get lte1 running] if ($status=false) do={ /system routerboard usb power-reset; } If interface disappears from the interface list, try this; if ([/interface print count-only where name=lte1]=0) do={ /system routerboard usb power-res...

krafg

We need that MUM comes back!

krafg

Hello! You can use license on one instance in one time. If you want to transfer the license from one CHR machine to another you must transfer the license on your MikroTik account (use button "Transfer" in "All CHR keys") and then run "system license renew" on your CHR ...

krafg

Thanks a lot

krafg

All mikrotik interfaces are slow to get registered on tower. If you need permanently get connection I recommend use 2 LTE interfaces, the second as failover. It works for me with LtAP + both Mikrotik LTE interfaces. You can check this for more information.

Regards.

krafg

Probably you need open a ticket on official Mikrotik support. Most probably is a RouterOS bug.

Regards.

krafg

Print detailed

/system resource usb print detail

Regards.

krafg

System -> resources -> USB

krafg

Check my signature for LtAP pole mounting and here share with you mANT5o pole mounted.

For connectors position you need to use that you can depending of internal length of pigtails that you will use (U.FL to SMA or RP-SMA).

Regards.

krafg

Best choose LtAP that includes Wi-Fi on board.

I have both devices but I not have minipcie wifi cards.

Regards.

krafg

Updated my entire network successfully with no issues. Thanks for this update!!!

Regards.

krafg

Why Cat6? Is best something like Cat18.

krafg

Finally after years something compatible with B28 (700 Mhz)!!!

I see that you used EG18-EA chip, so, now release the same but with EG18-NA and will be perfect!!!

Regards.

krafg

Anyway the specs looks great!

Regards.

krafg

Remember that LHG is a very high directional antenna and if you need change operator, most probably you need redirect the antenna on site.

I think that for this reason it's only with one SIM port.

Regards.

krafg

LHG LTE18 kit US version.

krafg

Why not blocking using Layer 7 + specific LAN IP range?

Regards.

krafg

Try to check the SIM port. Mikrotik's SIM port are extremely fragile.

Regards.

krafg

Check with different ROS versions. If no change, most probably is that your SIM port is damaged.

Regards.

Search found 1079 matches