Community discussions

MikroTik App

Search found 40 matches

by Bytezone
Sat Oct 08, 2016 10:31 pm
Forum: General
Topic: ADSL ISP MTU is 1442 ... Help in setting PPPoE Client MTU and MSS values
Replies: 2
Views: 949

Re: ADSL ISP MTU is 1442 ... Help in setting PPPoE Client MTU and MSS values

Not literally damaging but sure it will cause problems at loading some web pages like yahoo hotmail while users are browsing as well as taking around 10 to 20 second to re-connect pppoe-out interface again with my ISP to get the public ip address every time i modify the value of mtu and mss Guys it ...
by Bytezone
Wed Oct 05, 2016 11:42 am
Forum: General
Topic: ADSL ISP MTU is 1442 ... Help in setting PPPoE Client MTU and MSS values
Replies: 2
Views: 949

ADSL ISP MTU is 1442 ... Help in setting PPPoE Client MTU and MSS values

Guys as the subject say.. I have adsl line with mtu=1442 (windows -> command prompt -> ping 8.8.8.8 -f -l 1414 with no fragmentation) + 28 = 1442 setting adsl modem in bridge mode and creating pppoe client to connect directly to isp through mikrotik what value should i set with mtu i read on other p...
by Bytezone
Mon Aug 22, 2016 2:41 am
Forum: General
Topic: Simple PCQ equal bandwidth shaping Upload counting as Download ; /
Replies: 8
Views: 3995

Re: Simple PCQ equal bandwidth shaping Upload counting as Download ; /

I don't think you can. The simple queue works independently of queue trees. The simple queues are targeted at the user's IP address, so they're going to hit 100% of the traffic that user generates. The only way to make a simple queue miss some of a user's traffic is by sending it through a differen...
by Bytezone
Mon Aug 22, 2016 2:33 am
Forum: General
Topic: Policy Routing (UP/Down) through ISP_2 + Simple Queues with Packet Marks
Replies: 0
Views: 642

Policy Routing (UP/Down) through ISP_2 + Simple Queues with Packet Marks

Hello everyone, I'm sure this has been discussed so many times except how to deal with simple queues + packet marks added to shape the traffic instead of queue trees I have to ISP lines ISP_1: 192.168.101.1 and ISP_2: 192.168.102.1 the second ISP is dedicated for traffic based on address-list alread...
by Bytezone
Sat Aug 20, 2016 6:59 pm
Forum: General
Topic: Unlimited some services or dst-ip after login (hotspot)
Replies: 5
Views: 1685

Re: Unlimited some services or dst-ip after login (hotspot)

That bypasses NAT and filter rules only and doesn't affect simple queues. It's surprisingly hard to exempt certain traffic from rate limiting when using a Hotspot. You can override the simple queues that Hotspots use for rate limiting all traffic via queue trees attached to global-in and global-out...
by Bytezone
Sun Aug 14, 2016 2:33 pm
Forum: General
Topic: Simple PCQ equal bandwidth shaping Upload counting as Download ; /
Replies: 8
Views: 3995

Re: Simple PCQ equal bandwidth shaping Upload counting as Download ; /

If you only want to queue to traffic to/from addresses in a list, then you can omit the interfaces and use only the address list. Yup it's working :) would you lead me to the next step if you don't mind because this has been discussed so many times but actually that what confused me !! just looking...
by Bytezone
Sat Aug 13, 2016 11:11 am
Forum: General
Topic: CCR router - Queuing over 500mbps, slow cpu
Replies: 12
Views: 2812

Re: CCR router - Queuing over 500mbps, slow cpu

Image

It's not found there .. what package should i have to get it ?

Sent from my SPH-L720T using Tapatalk
by Bytezone
Fri Aug 12, 2016 8:06 pm
Forum: General
Topic: Simple PCQ equal bandwidth shaping Upload counting as Download ; /
Replies: 8
Views: 3995

Re: Simple PCQ equal bandwidth shaping Upload counting as Download ; /

In the pre-routing chain, add a condition to the rule: in-interface=bridge-local, and change the packet mark from "all" to "upload" Then copy the rule and change the mark from "upload" to "download" and change the in-interface from bridge-local to ether1-gateway (or pppoe1-out if you're using pppoe...
by Bytezone
Thu Aug 11, 2016 5:32 pm
Forum: General
Topic: CCR router - Queuing over 500mbps, slow cpu
Replies: 12
Views: 2812

Re: CCR router - Queuing over 500mbps, slow cpu

We experienced the similar issues while testing simple queues. This was resolved by turning on rps on the Ethernet interface to allow it to use the multiple cpu's. This may be the bottleneck you are experiencing. Hi Aron, could u please point me right to turning on the rps, where exactly this optio...
by Bytezone
Mon Aug 08, 2016 2:16 pm
Forum: General
Topic: Choose router?
Replies: 29
Views: 4166

Re: Choose router?

stick to UHS-I (UHS-II feats(same to UFS, XQD, which is ~ basically propriatery fork/derrivation of UHS-II))imply extra-contacts and electrial support, underlying, which is most devices lacking aswell as UHS-I support itself, but UHS-I label atleast mean that controller within card - wouldn't be so...
by Bytezone
Mon Aug 08, 2016 2:11 pm
Forum: General
Topic: Choose router?
Replies: 29
Views: 4166

Re: Choose router?

I tested with Samsung microSD Evo and Pro, work very well.
Hotspot ~ 400 active clients, radius interim update 5 mins
Thnx Miracle and indeed Samsung brand microSD Evo is the best in the market but I came eventually with SanDisk Ultra MicroSDHC UHS-I class 10 which is good too
by Bytezone
Sat Aug 06, 2016 1:51 pm
Forum: General
Topic: Choose router?
Replies: 29
Views: 4166

Re: Choose router?

Guys i am running my wifi network with x86 routeros for 2 years and decided to move to CCR1009-x but i need your advice in 2 things - CCR1009 came with microsd card slot and microUSB type AB slot, which one of those u suggest me to move user manager too, forgive me for such a basic question cause in...
by Bytezone
Thu Aug 04, 2016 8:52 pm
Forum: General
Topic: VLANs over single ethernet port on x86 RouterOS.. Low ISP throughput
Replies: 9
Views: 2471

Re: VLANs over single ethernet port on x86 RouterOS.. Low ISP throughput

If you connect a PC directly to Ethernet 2 (temporary disable the VLAN). What speed do you get? The expected speed of your ISP? the main point as ZeroByte said maybe it's not related to vlans neither bridge settings. just looking at the configuration it's very basic nothing out of the line. the oth...
by Bytezone
Wed Aug 03, 2016 9:10 pm
Forum: General
Topic: VLANs over single ethernet port on x86 RouterOS.. Low ISP throughput
Replies: 9
Views: 2471

Re: VLANs over single ethernet port on x86 RouterOS.. Low ISP throughput

sure i'm not the only wisp in my area. it's full of 2.4 ghz ubiquiti APs and suffer from the interference and i have some APs 60 mt away from the switch.
by Bytezone
Wed Aug 03, 2016 8:40 pm
Forum: General
Topic: VLANs over single ethernet port on x86 RouterOS.. Low ISP throughput
Replies: 9
Views: 2471

Re: VLANs over single ethernet port on x86 RouterOS.. Low ISP throughput

As for your speed issues, I'm not sure what might be behind this, but vlan tagging / split horizon shouldn't be slowing you down. Perhaps it's the queue type on your interfaces.[/quote] Sure just like what you said i seriously started thinking it may be something else other than dynamic simple queue...
by Bytezone
Wed Aug 03, 2016 8:40 pm
Forum: General
Topic: VLANs over single ethernet port on x86 RouterOS.. Low ISP throughput
Replies: 9
Views: 2471

Re: VLANs over single ethernet port on x86 RouterOS.. Low ISP throughput

Ok if i understand you precisely, so in principle this way of doing the host isolation could affect the traffic in case of using low features RB or having so many vlans in the network but in my case it should not affect the performance although it's not professional way of doing host isolation (to b...
by Bytezone
Wed Aug 03, 2016 11:43 am
Forum: General
Topic: CCR1009-8G-1S kernel failure
Replies: 5
Views: 918

Re: CCR1009-8G-1S kernel failure

It seems problems doesn't end with this product version , i guess i have to think twice before buying one tonight !
by Bytezone
Mon Aug 01, 2016 8:38 pm
Forum: General
Topic: VLANs over single ethernet port on x86 RouterOS.. Low ISP throughput
Replies: 9
Views: 2471

Re: VLANs over single ethernet port on x86 RouterOS.. Low ISP throughput

Thank you so much ZeroByte, i'm a big fan of you and enjoy learning and reading your guide information every time i take a tour at this forum and yes exactly I followed your guides i created a bridge, added vlans and sat split horizon to 1 on each, created hotspot dhcp of that bridge, the result is ...
by Bytezone
Thu Jul 28, 2016 10:50 pm
Forum: RouterBOARD hardware
Topic: Beware of CCR1009-8G-1S-1S+
Replies: 9
Views: 3436

Re: Beware of CCR1009-8G-1S-1S+

Thnx .. sure i will

Sent from my SPH-L720T using Tapatalk
by Bytezone
Thu Jul 28, 2016 10:43 pm
Forum: RouterBOARD hardware
Topic: Beware of CCR1009-8G-1S-1S+
Replies: 9
Views: 3436

Re: Beware of CCR1009-8G-1S-1S+

There is a known hardware issue with a small percentage of CCR1009-8G-1S-1S+ models. You are able to return faulty units to your distributor for repair. The units that shipped with RouterOS 6.18 are OK.  It is only a small number of units that shipped with earlier RouterOS releases that had the iss...
by Bytezone
Sat Jul 16, 2016 11:21 pm
Forum: General
Topic: Help !!!!! Load Balance PCC 3 Wan. Added Wan 4 drop internet speed.
Replies: 16
Views: 3167

Re: Help !!!!! Load Balance PCC 3 Wan. Added Wan 4 drop internet speed.

the problem is that i don't have one on my hand to give it a try, so it's better to ask before buying one. I'm sure someone has tried rb951 for doing the load balance. BTW the hotspot is configured on another x86 ros so the RB is just for doing the load balancing :) hi, sorry for the late reply. I ...
by Bytezone
Fri Jul 08, 2016 12:00 pm
Forum: General
Topic: Help !!!!! Load Balance PCC 3 Wan. Added Wan 4 drop internet speed.
Replies: 16
Views: 3167

Re: Help !!!!! Load Balance PCC 3 Wan. Added Wan 4 drop internet speed.

the problem is that i don't have one on my hand to give it a try, so it's better to ask before buying one.

I'm sure someone has tried rb951 for doing the load balance. BTW the hotspot is configured on another x86 ros so the RB is just for doing the load balancing :)
by Bytezone
Tue Jul 05, 2016 11:14 pm
Forum: General
Topic: Vlan Interface Bridge
Replies: 9
Views: 2241

Re: Vlan Interface Bridge

ZeroByte .. kindly can you take a look at the post mentioned in the url below..  I really need your suggestions and what to do to solve my issue :)

http://forum.mikrotik.com/viewtopic.php?f=2&t=109927
by Bytezone
Tue Jul 05, 2016 10:41 pm
Forum: General
Topic: Help !!!!! Load Balance PCC 3 Wan. Added Wan 4 drop internet speed.
Replies: 16
Views: 3167

Re: Help !!!!! Load Balance PCC 3 Wan. Added Wan 4 drop internet speed.

Guys I got RB750Gr2 (hEX) to do the load balancing for 2 WAN (each one is 4Mb) the speed of connection is so terrible i tried both pcc and nth but nothing changed .. someone suggested that i should get RB951 instead of the RB750Gr2 to do the load balancing.. i don't know is it a hardware problem or ...
by Bytezone
Tue Jul 05, 2016 1:22 am
Forum: General
Topic: VLANs over single ethernet port on x86 RouterOS.. Low ISP throughput
Replies: 9
Views: 2471

VLANs over single ethernet port on x86 RouterOS.. Low ISP throughput

Hello guys .. I have a very basic hotspot configuration Open wifi network service. I created  VLANs to isolate the Access points from seeing each other along with the client isolation option enabled on each AP to isolate connected clients. APs used on my network are NSM2 bridge mode. APs are connect...
by Bytezone
Mon May 23, 2016 8:11 pm
Forum: General
Topic: Mangle - how to do right?
Replies: 52
Views: 17567

Re: Mangle - how to do right?

Guys.. can anybody enlighten me on how to adapt Mr. tomas script to work on pppoe client by bridging modems especially the mangle section :D ..

Internet connection is so terrible in my country i really suffer from repeatedly internet disconnection from my ISP.
by Bytezone
Mon May 23, 2016 8:05 pm
Forum: General
Topic: Dual WAN PPPoE Load Balance - Advise needed
Replies: 1
Views: 810

Re: Dual WAN PPPoE Load Balance - Advise needed

Hi.. InfinityMVS.. Did you get the mangling script to work on pppoe connections ??
by Bytezone
Wed Apr 06, 2016 11:36 am
Forum: General
Topic: Allow to whatsApp only
Replies: 31
Views: 509307

Re: Allow to whatsApp only

I'm wondering khaled11 you just asked everybody for help to solve your problem .. so basically you better share the solution to all members too this is how this forum is working :)
by Bytezone
Mon Apr 04, 2016 3:35 pm
Forum: Beginner Basics
Topic: Network issues with PCC
Replies: 4
Views: 1163

Re: Network issues with PCC

I'm having the same issue just like giomanda, the speed drops randomly and comes back normally to all active users connected on hotspot based on vlan interfaces..

Hope somebody can give us a clue :)
by Bytezone
Tue Mar 22, 2016 11:17 am
Forum: General
Topic: multiple vlans, multiple pools in one hotspot server
Replies: 6
Views: 3120

Re: multiple vlans, multiple pools in one hotspot server

how interesting to see exactly what u look for !! :D cadamuroa .. actually i was searching the whole day for such configuration and i came to the same point which is how to share the hotspot page across all the vlan subnets.. Well appreciate your help in this :) cheers.. Hi Bytezone, how are you? I...
by Bytezone
Mon Mar 21, 2016 8:18 pm
Forum: General
Topic: multiple vlans, multiple pools in one hotspot server
Replies: 6
Views: 3120

Re: multiple vlans, multiple pools in one hotspot server

how interesting to see exactly what u look for !! :D

cadamuroa .. actually i was searching the whole day for such configuration and i came to the same point which is how to share the hotspot page across all the vlan subnets..

Well appreciate your help in this :)

cheers..
by Bytezone
Mon Feb 22, 2016 8:14 pm
Forum: Beginner Basics
Topic: Adding a complete local website to the same x86 routerOS
Replies: 8
Views: 1504

Re: Adding a complete local website to the same x86 routerOS

Yup sure jarda.. i will make sure to keep you updated with the latest once i finish what i want here at this post :D
by Bytezone
Sun Feb 21, 2016 3:50 pm
Forum: Beginner Basics
Topic: Adding a complete local website to the same x86 routerOS
Replies: 8
Views: 1504

Re: Adding a complete local website to the same x86 routerOS

Hi thank you BartoszP you gave me a lot more good options to look for .. all i need then is to look at the market for such devices as i guess this is the ultimate solution to add a local website to my network.

Thanks to all of you BartoszP, jarda and gotsprings for the help really appreciate that :)
by Bytezone
Sat Feb 20, 2016 6:40 pm
Forum: Beginner Basics
Topic: Adding a complete local website to the same x86 routerOS
Replies: 8
Views: 1504

Re: Adding a complete local website to the same x86 routerOS

Thank you so much jarda for your valuable suggestions.. sure i know mikrotik can't act like a web server that's why i mentioned static website (no need for database or support php libraries) and for the hosting service on the internet.. it's really a good idea but the problem is such a website needs...
by Bytezone
Thu Feb 18, 2016 11:55 pm
Forum: Beginner Basics
Topic: Adding a complete local website to the same x86 routerOS
Replies: 8
Views: 1504

Adding a complete local website to the same x86 routerOS

Guys I really need your help here .. Due to the lack of electricity on my country (critical situation here in Yemen) I'm runnying my public wifi network based on Solar power so there's no additional power capacity to add one more x86 pc as a web server (at least i will need another 300 Watt to do th...
by Bytezone
Thu Dec 10, 2015 4:04 am
Forum: Announcements
Topic: FastTrack - New feature in 6.29
Replies: 237
Views: 154512

Re: FastTrack - New feature in 6.29

Even though it's existing as a feature on x86 ROS v6.33, really disappointed i see the fasttrack-connection on the action menu and can not use it !! .. thanks nz_monkey I hope mikrotik people do their job for this matter so i can enjoy this great feature like my friends here. :)
by Bytezone
Wed Dec 09, 2015 7:58 pm
Forum: Announcements
Topic: FastTrack - New feature in 6.29
Replies: 237
Views: 154512

Re: FastTrack - New feature in 6.29

Can anybody confirm whether it's supported on x86 .. if not what should i do to use it?
I have v6.33 installed on my computer.
by Bytezone
Sat Sep 19, 2015 9:32 pm
Forum: Beginner Basics
Topic: "invalid password" for most users on hotspot login
Replies: 1
Views: 2599

"invalid password" for most users on hotspot login

Hi.. guys .. this is my first post on mikrotik forum OK i will jump ahead to the problem .. most of the users "created in user manager" has to input their login information "twice" before the success to login !! for first time the "invalid password" appears to the user although he puts the right pas...
by Bytezone
Tue Jul 14, 2015 6:24 am
Forum: Scripting
Topic: {{ auto Division download & upload Between users Equality }}
Replies: 14
Views: 3011

Re: {{ auto Division download & upload Between users Equality }}

This method and other similar ones are doing great ..

but the real problem comes from the client side .. you see sometimes active users don't use the internet (tx rate 0 bps) and they reserve an equal bandwidth for doing nothing!!