MikroTik

Chiara

Hi,

may I ask what's the maximum distance in meters that allow a client to reach the wifi6 network of a cAPGi-5HaxD2HaxD?
i.e. competitor says 140 m² (1,500 ft²) coverage

Thanks, BR

Chiara

anyway it's the server that manage the routes, now on the client I get: dest gateway distance DAv+ SITEa.a.a.0/24 tunnel.client 1 DAC tunnel.0/24 ovpn-out 0 and on the server: tunnel.0/24 link#18 tunnel.server link#18 SITEb.b.b.0/24 tunnel.server and it works!

Chiara

Hi, What does that mean Immediate Gateway ? I can see an ip address that doesn't exist from a dynamic route created by openvpn client that set: - Dst. Address the MAIN SITE LAN/24 - Gateway MAIN SITE tunnel ip - Immediate gateway TUNNEL IP that doesn't exist%ovpn-out1 I can ping MAIN SITE LAN but ov...

Chiara

After the client is connected it get a dinamyc address (6) which is wrong, I expected the (5) as correct: ip/address/print # ADDRESS NETWORK INTERFACE 6 D 10.7.50.6/32 10.7.50.5 ovpn-out1 5 X 10.7.50.2/32 10.7.50.0 ovpn-out1 I've tried an option config on the server to force the correct ip but seems...

Chiara

Thanks with:

custom options on server:
tls-version-min 1.2;
tls-version-max 1.2;

and TLS Version: only v.1.2 on mikrotik

the status goes to connected.

Chiara

Hi, I have a PFSENSE 23.05 OPENVPN SERVER these are the LOGS: TLS error: Unsupported protocol. This typically indicates that client and server have no common TLS version enabled. This can be caused by mismatched tls-version-min and tls-version-max options on client and server. If your OpenVPN client...

Chiara

Dear Sirs, we got 2 SXT SA5 in bridge both with DHCP Client enabled the first one got right the ip: # INTERFACE USE-PEER-DNS ADD-DEFAULT-ROUTE STATUS ADDRESS 0 ponte yes yes bound 192.168.24.8/24 the second which is connected ad wireless client to the first instead show: # INTERFACE USE-PEER-DNS ADD...

Chiara

Thanks for your reply, I'm trying to understand where the issue is created, the printer fail to send even a single page (but after a few single page scan with success), The routeros setup is this: interfaces # NAME TYPE ACTUAL-MTU L2MTU MAX-L2MTU MAC-ADDRESS 5 RS 6PRINTER ether 1500 1580 10222 6C:3B...

Chiara

Just a note about point 3) official docs it report in packet structure: "Function Parameters - usually specifies register address, data length and data to be written in case the "write" function is used." So I was wondering if there was some optional hidden parameters, but it's n...

Chiara

May I ask you how did you managed to enable the port at startup? # NAME START-DATE START-TIME INTERVAL ON-EVENT RUN-COUNT 0 modbus_poll jan/19/2023 09:51:31 1s modbus2mqtt 108 1 modbus_init startup 0s modbusinit 1 /system scheduler add interval=1s name=modbus_poll on-event=modbus2mqtt policy=\ ftp,r...

Chiara

Thank you it's what I was looking for, just a few questions 1) what is the meaning of " as-value once " , it's in the official docs but got no description: https://help.mikrotik.com/docs/pages/viewpage.action?pageId=61046813 2) Anyway all of this should be put in a script and then system>s...

Chiara

Dear Sirs, got a canon printer that can send max 4 scan to email then it start to trow this until reboot: TCP 66 [TCP Out-Of-Order] [TCP Port numbers reused] 65132 → 80 [SYN] Seq=0 Win=64240 Len=0 MSS=1460 WS=256 SACK_PERM=1 80 TCP 60 [TCP Dup ACK 338#1] 80 → 58692 [ACK] Seq=1 Ack=654 Win=10867 Len=...

Chiara

@asiobob thanks for the quickstart, may I ask a little more detail to get point 4. working?

4. RouterOS itself has some modbus querying commands built in. You can write scripts to query values and pass them onto the MQTT feature.

Chiara

May I ask if there's a End Of Life date for release 6.x?
Thanks, BR

Chiara

Dear Sirs, can you please tell me why this script run fine if copy/pasted in terminal while won't do anything if started from "Run Script" push button ? Thanks, BR # RouterOS v. 7.6 # Required packages: iot :global currentIP; :global newIP [/ip address get [find interface="ether1"...

Chiara

Dear Sris,

what is the best installation position ceiling, wall, worktop for the wifi of this device. How can I understand in which direction the wave is expanding?

https://mikrotik.com/product/RB951Ui-2H ... -downloads

Thanks, BR

Chiara

Hi,

I'm looking around to find an C52IG-5HAXD2HAXD-TC available in Italy/Europe.
Mikrotik guys could you confirm that need to wait to january 2023 ?

Thanks, BR

Chiara

RB912R-2nD upgraded from 6.49.6 to 7.5, is it standard behavior that lte1 iterface goes down every 4 hours? lte1 link down lte1: not registred, state: 0 lte1: registered home lte1 link up this haappen exactly every 4 hours: i.e. 14:34:29 10:34:29 06:34:29 and so on Is there some scheduler that can b...

Chiara

Dear Sirs,

I've noticed "secrets" have disappeared from exported .rsc configuration files, is there a way to take these back in the file?

Thanks, BR

Chiara

Running a RouterOS v7.5 on a RB951Ui, any chance to run some image with ASTERISK 17 or 19? Anyone can share a prebuild image, I've followed official docs but point to year 2010 image: https://wiki.mikrotik.com/wiki/Manual:Metarouter http://www.mikrotik.com/download/metarouter/openwrt-mr-mips-rootfs....

Chiara

V. 7.1.5 new menu IoT > MQTT

Thanks Mikrotik!

Chiara

CAPsMAN allow to manage multiple distribuited AP devices, was available on v6 and it seems it doesn't work with wave2 on v7,
Thank you for your advices.
I will open a ticket with support about the incomplete config.
Have a nice day

Chiara

On routeros v.7 the power is managed by the Ap, it isn't set neither shown. If I put 7 in Tx Power it decrease the signal seen by the clients, right now result in: more power less bandwith. With v.6 manual set of 7dbm tx power, result in 70Mbps speed and this means it was good for the case. About co...

Chiara

Thanks for the replies, I've already installed all additional packages, here's export from v7, anyway seems that security profile is disappeared from export action. # feb/03/2022 14:26:36 by RouterOS 7.2rc3 # software id = S7MW-MLSZ # # model = RBD25G-5HPacQD2HPnD /interface bridge add name=bridge1 ...

Chiara

Dear Sirs, I've tried out the new stable Routeros 7 and the v7.2rc2/3, now I get a huge bandwidth decrease with new versions. My ISP max speed is 70Mbps : - with 6.49 I can achieve the same speed on both 2.4 and 5Ghz. - with 7 I can achieve max 40 Mbps and some android client refuse to connect to 5G...

Chiara

Hi,
it's 2022, any news on "Bandsteering" on both Routeros 6 and 7?
Thanks, BR

Chiara

I'll try it on the Audience.
Thank you for fast reply,
BR

Chiara

I've just downloaded the package but cannot find it:

all_packages-mipsbe-7.1/
├── calea-7.1-mipsbe.npk
├── gps-7.1-mipsbe.npk
├── iot-7.1-mipsbe.npk
├── lte-7.1-mipsbe.npk
├── tr069-client-7.1-mipsbe.npk
└── user-manager-7.1-mipsbe.npk

Any guide to enable this feature ?
Thanks, BR

Chiara

Thank you, this way all seems to work:

 [ :set $myVar "my value"; log info $myVar ]

Chiara

Thank you, you've saved "half" of my day, hope mikrotik will fix it also in the wiki.
Now the var can be set, but next row :put alway is empty.

Chiara

Hi, If i copy and paste this code on a terminal of CCR1009 with routeros 6.47.7 it fails, but on the manual it says it it the correct sintax https://wiki.mikrotik.com/wiki/Manual:Scripting#Variables: :local myVar; :set myVar "my value"; :put $myVar; log info $myVar this is the output from ...

Chiara

Dear all, I've exported a rsc file but the users are missing. There is the group but not the users. /user group set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,pas\ sword,web,sniff,sensitive,api,romon,dude,tikapp" add name=TEST policy="web,api,!local,!telnet...

Chiara

Any news about MQTT support?

Chiara

Thanks for your reply.
It's a little bit more complicated, just added a diagram.
I can use the bridge between A, AP adn C?

Chiara

Dear Sirs, can you please point me out which is the best router OS configuration to have low latency possible with: Access point 5Ghz HG3-TP-S50 with RB922UAGS-5 HPacD: (1 km distance) Client 5Ghz RBMetalG-52S HPacn (A) RBMetalG-52S HPacn (B) Etherne Client of (A) should create a 2Ghz wifi network C...

Chiara

Thank you for answering, both are MIKROTIK routerboard. I don't know if this is correct but this seems to work: # jan/02/1970 00:15:28 by RouterOS 6.44.3 # software id = Y6VQ-AHV4 # # model = RouterBOARD mAP L-2nD /interface bridge add comment=defconf name=bridge /interface list add comment=defconf ...

Chiara

I want to allow the DHCP client PC (A) connected to ETH1 port of the mAPlite (B) to an existing DHCP server (C)in accessible by the LAN where the WLAN interface of the mAPlite is connected. But I cannot get the IP from the DHCP server, with Torch I see the requests but no response. If I enable the D...

Chiara

Thank you for your replies! The issues seems solved, here the working config: # apr/08/2019 14:00:58 by RouterOS 6.44.2 # model = RouterBOARD mAP 2nD /interface bridge add name=BRIDGEWIFI /interface ethernet set [ find default-name=ether1 ] advertise=\ 10M-half,10M-full,100M-half,100M-full,1000M-hal...

Chiara

I need this device as simple AP, you connect a ethernet cable and connecting devices to wifi ssid the must reach the cabled side, but a simple ping take crazy timing: sometimes 70 ms sometimes 700ms. Can you please say if there is something wrong in this configuration? # apr/12/2019 11:49:37 by Rout...

Chiara

Thanks for help, the problem was the free space missing.
Have a nice day

Chiara

The command reuturn an error: > /system packages bad command name packages (line 1 column 10) /system package> print Flags: X - disabled # NAME VERSION SCHEDULED 0 routeros-tile 6.43.4 1 system 6.43.4 2 ipv6 6.43.4 3 wireless 6.43.4 4 hotspot 6.43.4 5 dhcp 6.43.4 6 mpls 6.43.4 7 routing 6.43.4 8 ppp...

Chiara

Dear Sirs, I've upgraded successfully other RB but a CCR1009-7G cannot upgrade to stable 6.43.11 from 6.43.4. It finds the latest version, Download and install start, it reboot and nothing in log, neither change in the check for updates. Routerboard firmware is 6.43.4. Can you please say me how to u...

Chiara

+1
Please add this feature

Chiara

Dear Sirs,
why the led cannot be turned OFF on RB 951?
It's a problem on my hardware or it's a software issue?
Please allow to turn off those LED light.
Thanks, BR.

Chiara

Tried with PPTP everything seems to works fine, why make Openvpn setup is sow complicate?

Chiara

Dear Sirs, just followed this tutorial: https://www.medo64.com/2016/12/simple-openvpn-server-on-mikrotik/ This on the mikrotik server: /certificate add name=ca-template common-name=TB001 days-valid=7650 key-size=2048 key-usage=crl-sign,key-cert-sign add name=server-TB001-template common-name=server-...

Chiara

I'm running a RB951 as default gateway with DHCP server for a small LAN. If I've got a DHCP pool from 192.168.1.150 to 192.168.1.160 and one guy get address 192.168.1.155 from dhcp , then he set this address to his pc as static ip address. Can it be possibile that my router would reuse the .155 with...

Chiara

Dear sirs, I use a mAP that connect as a client to a Wireless network, then it share the connection by ethernet with a RB951. The RB951 act as wifi AP and create a secondary separate wireless network with dhcp server. I'm just looking to manage this with one device: can it be done with the RB962UiGS...

Chiara

Dear Sirs, I need to nat traffic from a Siemens S7/1200 PLC, I can ping the plc but cannot connect by siemens management software that should use port 102. I've made a general nat rule no specified ports, as the ping works I believed other protocols either works, but it's not like this. Is anyone wi...

Chiara

Thanks for your reply, I don't think it case A no all pcs have mcafee antivirus installed...

B! Setting OpenDNS on mikrotik will solve?

Chiara

I'm experiencing a strange situation: isp provider router > mikrotik router > lan clients dhcp server > client > static ips If internet connection get lost but gateway is still up, all the WINDOWS lan clients no matter version XP, 7, 10 they take a big time at boot, blue screen / black screen.... an...

Chiara

Just found the wAP LTE kit
https://mikrotik.com/product/wap_lte_kit

Chiara

Dear Sirs, we need a backup internet provider, I'm using a Lenovo K6 with USB thetering and it see a LTE interface, added DHCP client and it works fine. Now we need a stable alternative that would run 24x7, are these USB LTE modem working properly with Router OS 6.40.1? Verizon MiFi® 4G LTE Global U...

Chiara

I've submitted the support file, I share the reply for the ones who got this problem: Hello, Thank you very much for the report. The server is not providing IP configuration (ifconfig) to the client, so IP address from PPP profile is used. Unfortunately, there is a bug that "network" field...

Chiara

This is a site-to-site configuration, I've got this running for a year without issue, this morning I've upgraded, and seems that a route is automatically added. With that route not traffic between clients is possible. Pfesense 2.4.1 as openvpn server RouterOs 6.40.1 as openvpn client /ppp> profile p...

Chiara

The modem seems to work, maybe your config is wrong.

Chiara

Dear Sirs,

I'm using wine on Debian with a 4K screen and winbox appear really tiny.
I don't have tried it on windows but probably it's the same.
Can you please add 4k support?

thanks, BR

Chiara

It works fine, thank you!

Chiara

Ok, I get it now, thanks!

this is my scenario:
A >>> B >>>> C

A: external ruoter with dhcp and AP
B: the mAp should connect to A by wifi
C: a pc without wireless that should connect to A

To connect C to A I can use: CPE - Short for "Customer Premises Equipment"?

Chiara

Dear Sirs, just bought a mAP lite, connected to his power supply and to ethernet port (the Link led on switch is ON and the Act Led is OFF ) From winbox no neighbour is detected and no direct access to 192.168.88.1. I've set my pc to 192.168.88.100 and no ping back from 192.168.88.1. I've used mAP, ...

Chiara

Dear Sirs,
is there a way to publish message to a mqtt broker from scripting?
Actually I don't need a subscriber, only a publisher.
I can't find anything about it, every advice is really appreciated.
Thanks, BR

Chiara

Dear Sirs, I have this scenario: interfaces: 1WAN: pppoe-client 1WANIPpublic 2WAN: DHCP-client (192.168.1.2) act as DMZ of 2WANIPPublic (there is provider router that redirect all traffic to 2WAN interface) gateway 192.168.1.1 5LAN: internal lan I need to access an internal lan address when calling ...

Chiara

Dear Sirs, I need an advice is it possible to achieve this: internet > mikrotik > lan client nat http multiple internal http server from 80 to 80 of: 192.168.1.1 for client 1 192.168.1.2 for client 2 192.168.1.3 for client 3 can the client from the internet be allowed to access only the correspondin...

Chiara

Hi, thanks for advices, it turned out that the device was under DoS attack... solved changing hw.

Chiara

Thanks for your reply ZeroByte, everything seems fine now.

But can I ask you why if with the rule of:

chain=input action=drop in-interface=ppp-wan

and enabling:

Ip/DNS / allow remote request

the world can call the dns port?

Chiara

Seems better with:

chain=input action=add-src-to-address-list protocol=udp address-list=DROPPED address-list-timeout=20m connection-limit=10,32 in-interface=ppp-wan dst-port=53 log=yes log-prefix="DROPDNS"

Chiara

Thanks for the help, now after a night I've 70Mb of traffic blocked, now would ask my ISP to check, what's happen

Chiara

Dear Sirs, I've setup a mikrotik RB 951Ui as PPPoe client to act as router for a LAN, we got a STATIC PUBLIC IP. After a few days the connections list in firewall showed more than 800 entries, all from unknows src address to PublicStaticIP:53. I've already setup 4 differents microtik in the same sit...

Chiara

Actually there is a big problem of packet loss on the mikrotik, if I do a ping from a client, it report a percentage of 14.

Chiara

Dear Sirs, I've setup a PPPoE connection on WAN1 with EOLO ISP, first try everything was fine, test speed was 8.00Mbps . After 2 days connection was still on but test speed was 1.2Mbps. I've tried a disconnect then reconnect, still the same. Reset routerboard to factory default with a blank conf, ch...

Chiara

I've managed to : 1) WAN Client of an existing external SSID act as gateway 2) LAN phisical ports use the WAN gateway to access internet It appear that the external SSID is extended by the mikrotik, I see clients that are connected to that SSID, but I'm unable to get them communicate with LAN device...

Chiara

I've looked in supported hardware: USB wireless cards Model Form factor ROS Result 802 b/g/n AR9271 USB 5.0rc4 works 802 b/g/n AR9271 Ubiquiti WiFiStation USB 5.8 x86 works on N but causes reboot on G 802 b/g/n AR9271 ALFA AWUS036NHA USB 5.14 x86 works 802 b/g/n AR9170 NETGEAR WN111v2 USB 5.16 x86 D...

Chiara

For the newbye like me, I've solved like this: (this is optional but make everything more understandable) I've renamed wlan1 as WAN and bridge-local as LAN then added a masquerade rule to allow traffic: [admin@MK] /ip firewall nat> print Flags: X - disabled, I - invalid, D - dynamic 0 ;;; default co...

Chiara

I'm trying to setup a 951G 2HnD as: 1) wlan1:DHCP client successfully connected to existing SSID with internet access ip network: 192.168.0.0 [admin@MK] /ip dhcp-client> print Flags: X - disabled, I - invalid # INTERFACE USE-PEER-DNS ADD-DEFAULT-ROUTE STATUS ADDRESS 0 ;;; DHCP_CLIENT_ETH1 default co...

Chiara

I've tried to configure a RouterBoard 951G then, shut it down by remove power (is there another way to safely turn it down?), next I've turn it on, it ping, but no access to web interface and telnet. I've tried many times, after reset to factory settings it is accessible, then I reconfigure it and k...

Search found 75 matches