MikroTik

ericnyamu

i think you need to setup your routes correctly. and let the pc know which is the gateway and how to route the ips in and out of the network.

ericnyamu

i think you need to setup your routes correctly. and let the pc know which is the gateway and how to route the ips in and out of the network

ericnyamu

if you increase sensitivity you are also increasing noise so better find another quieter channel

ericnyamu

bytes is calculated by free radius attributes.if you want facebook to be free then you have to include its domain name in free radius config so that it doesnot include it when calculating bytes used

ericnyamu

Yes. Thats the best result coz you got wds on. Wds cuts your bandwidth,

ericnyamu

Crazy setup.but the key is to keep it simple.you will need a base station for every town so the town's ap can connect to.okay thats obvious.then you will have to connect all the base stations to a central base station for management.this setup makes scalling and troubleshooting easy

ericnyamu

Change SSID to " i am invinsible" lol

ericnyamu

An idea is "bypassed users" must be on a different network.so that they can access network at all time.then all other users will be on another network say 10.0.0.0 which has time restrictions

ericnyamu

Its impressive because he did it on the cheap, but an airfiber5x can do those speeds

ericnyamu

well if you donot want to charge user when they login and just want them to reg for records then you have to remove the billing aspect of your installation.it will mean to create new radius groups without billing and put your registered users in them

ericnyamu

The biggest problem I see is the "member logging". I've never seen anyone who has correctly done this. I need hourly/daily/weekly logs so I can create reports. Could anyone share his work?

do you mean you want ,to do automatic member login ?

ericnyamu

check how to enable mac cookie on mikrotik

ericnyamu

you have to check how congested is your wifi environment and pick best channel. maybe use a wifi analyzer like Acrylic WiFi or insider

ericnyamu

am sure with alittle bit of scripting it can be achieved.but you will still need a radius server (pc).i think this is what you want to do

http://goo.gl/S3s4d6

ericnyamu

do you really have to go with windows? there are so so many network monitoring apps on linux is amazing

ericnyamu

Does the laptop ip change to a different ip all the time or changes to the same ip?

ericnyamu

Yes you can.just go to the hotspot login page and code your disclaimer there.but for best practices the disclaimer is agreed to during initial registration.

ericnyamu

The solution to this is very simple.get a hotspot system like coovachili that REMEMBERS the device mac address during initial registration.so that during subsequent logins (using apps or browsing)the device mac address if its on the whitelist its let in.i know coovachili does this.i guess its a feat...

ericnyamu

Some info about the cable you are using maybe?

ericnyamu

A routerboard ? Seriously is there an RB that does less than 100mbps in this day and age ?

ericnyamu

B is repeating link from a to c thus the low bandwidth of 10mbps at c .

ericnyamu

It should work.RB can hold much more than 15 simultaneous clients. What are some of the speeds you want to offer?

ericnyamu

Keyword there is UNTIL NOW .Time to upgrade

ericnyamu

You have to create radius group with the profile you want.then when user registers you associate him with the appropriate group.so next time he logs in he logs into the correct group.in theory thats how it should work.so get scripting

ericnyamu

What do you mean by real data? Isnt the speedtest you did real data ?

ericnyamu

How high is where you have good LOS. Height doesnot affect speed,i think

ericnyamu

Its very simple what you need is to use mikrotik capive portal with a radius software.so radius server you can make a radius group lets call it 1mb plan whereby if a customer reaches his 1gb quota he's throttled to your desired speed.check out daloradius for this

ericnyamu

The tablets name is quite suspect.do other devices disconnect too?

ericnyamu

Yes it is

ericnyamu

Hi Is there a way to create a repeater that will repeat signal from multiple ssid's/radios? If you mean that it would sort of extend the range of the original AP? Well, Yes it is possible. But it comes width some negative effects.... There are two ways of doing this: - one repeater (in wds mode) th...

ericnyamu

I have noted some mikrotik pcie cards have two antenna (mmcx) can i use one antenna for backhaul and another antenna for client/customer link.will there be self-interferance with such a setup.i would like to repeat a signal without loosing half the bandwidth in the cheapest manner possible.ideas are...

ericnyamu

wow. am amazed.how can you guys have over 2000 clients on mikrotiks that individually cannot hold more than 50 clients.wow. we would really love to see how your networks are configured.

Search found 32 matches

Re: Connect to my public IP inside my LAN

Re: VPN setup between 2 mikrotik routers

Re: Rx sensibility radio

Re: How is responsible for bytes calculation in hotspot ?

Re: First time using Mikrotik product. Advises and help needed.

Re: Recommended Design for Wireless Network in a large institution?

Re: how to protect SSID from Radars?

Re: Scheduled disconnecting HotSpot users except bypassed users (IP binding)

Re: Netmetal AC Field Deployment - 230Mbps FD!!!

Re: HotSpot Walled Garden after Login (Walled Garden with Internet)

Re: free Hotspot

Re: Mikrotik hotspot login page

Re: best channel

Re: Wireless Hotspot Traffic shaping rule enforce?

Re: Network Bandwidth Monitoring ?

Re: IP address changes after trial user login

Re: Mikrotik and Hotspot

Re: WiFi Hotspot POP UP TO AUTHENTICATE - mOBILE PHONES ETC

Re: Packet loss from antenna to routerboard on cable link

Re: 100 megs connection... what board is needed

Re: bandwidth problem

Re: Recommendation for WISP ac Basestation

Re: problems with Hotspot login page on multple devices

Re: Virtual AP and HTTP authentication based on Radius user groups

Re: QRT (RB911G-5HPnD) Very Low Throughput

Re: Project help

Re: Wireless Hotspot Traffic shaping rule enforce?

Re: problem with wireless connection tablet to mikrotik

Re: Disconnect client after specific time

Re: Is there a way to create a true 2.4ghz repeater

Silly question Alert: Repeating a signal

Re: Mikrotik WISPs: Where?