Community discussions

Search found 33 matches

by Genkun
Sat May 18, 2019 10:07 am
Forum: Wireless Networking
Topic: Recommendtions for new network
Replies: 2
Views: 576

Re: Recommendtions for new network

Hi, Just a quick overview on the design itself. I am curious as to why you are using Groove + panel 24dB PtP. This is single polarized then and according to the design you will have multiple Access Points behind this. I'd rather have 2x LHG5 or XL5's pointing to each other. Especially at 12km i'd ra...
by Genkun
Mon Jun 11, 2018 11:25 am
Forum: The Dude
Topic: IPGovernor: Free Cloudbased Mikrotik Network Uptime Monitoring Tool for LAN & WAN host
Replies: 11
Views: 2105

Re: IPGovernor: Free Cloudbased Mikrotik Network Uptime Monitoring Tool for LAN & WAN host

Watching the Video now. Lets hope it goes smoothly for the setup. I did not see any import command? We have an EMCO monitoring which can export to csv format. There are over a thousand entries so an import would be ideal. Even if the information on first import is minimal, name and IP address. Can a...
by Genkun
Wed Apr 25, 2018 10:40 am
Forum: Announcements
Topic: v6.42.1 [current]
Replies: 272
Views: 45662

Re: v6.42.1 [current]

Got 2 separate issues. One is verified and can be duplicated. Other is still being investigated: When there is a AP Bridge / Station(Station Bridge) with a RB433 on either the AP or Station in 802.11 the station will not connect Rx rates whatsoever. This is true regardless of password, connect list ...
by Genkun
Fri Dec 22, 2017 12:47 pm
Forum: Wireless Networking
Topic: WaP LTE Issues [SOLVED]
Replies: 8
Views: 1427

Re: WaP LTE Issues [SOLVED]

Was hoping for a response to this post. Would be useful to a lot of people.
by Genkun
Fri Dec 22, 2017 12:46 pm
Forum: Wireless Networking
Topic: WaP LTE Issues [SOLVED]
Replies: 8
Views: 1427

Re: WaP LTE Issues [SOLVED]

Was hoping for a response to this post. Would be useful to a lot of people.
by Genkun
Thu Mar 16, 2017 8:00 am
Forum: Scripting
Topic: Schedule Reboot
Replies: 2
Views: 9121

Re: Schedule Reboot

I Believe you only wish to reboot the device on days that RouterOS upgrades have been done? Do you manually do the upgrades on each device or do you have a way to do them all remotely but just need a reboot on those days? There is a few ways you can go about this and one way is to use netwatch to tr...
by Genkun
Wed Sep 28, 2016 9:01 am
Forum: General
Topic: Export Full Config for Disaster Recovery
Replies: 7
Views: 976

Re: Export Full Config for Disaster Recovery

Some devices seem cross compatible with backups. For instance a netbox5 works fine with a groove. It seems only devices with different switch chips have issues. Like backing up a RB951Ui to a hAP lite completely changes the interface ether order. Or a PowerBOX to a RB951G. One is a PoE switch and th...
by Genkun
Fri Jul 22, 2016 6:14 pm
Forum: General
Topic: UserManager in MikroTik RB951Ui-2nD (hAP)
Replies: 3
Views: 1346

Re: UserManager in MikroTik RB951Ui-2nD (hAP)

It all depends on license level. That unit comes with level 4 license. So 20 simultaneous user manager users is the maximum.

More info here:
http://wiki.mikrotik.com/wiki/Manual:License

Sent from my GT-I9505 using Tapatalk
by Genkun
Mon Jul 11, 2016 9:16 am
Forum: Announcements
Topic: v6.35.4 [current] is released!
Replies: 51
Views: 22133

Re: v6.35.4 [current] is released!

Hello, I wrote to Normis. On another forum you wrote. "IGMP snooping development will not be sped up if one person will register many forum accounts and post the same request over and over again" "IGMP snooping is currently not in development and we have no plans to make it in near future. Your voi...
by Genkun
Mon Mar 14, 2016 3:58 pm
Forum: Announcements
Topic: Winbox3.3 released!
Replies: 37
Views: 9511

Re: Winbox3.3 released!

very fast...
I think that's an understatement :lol:
by Genkun
Fri Mar 11, 2016 12:44 pm
Forum: Announcements
Topic: Winbox3.2 released!
Replies: 59
Views: 11588

Re: Winbox3.2 released!

docmarius - Thank you. We are aware of it and it is reported to developers. tetecko - We can not make sure that everything can be done with single click. Why do not jut use "X" to close Winbox? Some of us don't use microsoft :-) I have OSX, and CrossOver, so press X do nothing, and if I want to clo...
by Genkun
Fri Mar 11, 2016 11:17 am
Forum: Announcements
Topic: v6.34.2 [current] is released!
Replies: 60
Views: 22837

Re: v6.34.2 [current] is released!

Just to be sure you've got the idea: it is not too big problem not to get response or get buggy version (read as 'not tested well') if we talk about cheap home routers. I also understand MT is a small company where too few people can pay their attention to improve anything, while they keep adding n...
by Genkun
Wed Feb 10, 2016 2:19 pm
Forum: Announcements
Topic: v6.32.4 [bugfix] is released!
Replies: 24
Views: 13071

Re: v6.32.4 [bugfix] is released!

@honzam: Good hint :-) @macgaiver: I hope the same, but I would like to have some official answer from MikroTik. Finally I will have to do some internal testing, but it would be nice to have an official answer from support team. You are one strange fellow.... Mipsle works of 6.32.4 as tested by a f...
by Genkun
Tue Feb 09, 2016 7:47 am
Forum: Announcements
Topic: v6.34.1 [current] is released!
Replies: 59
Views: 16127

Re: v6.34.1 [current] is released!

Backup incomplete ? RoS 6.34.1, Winbox 3.1: I backed up a map2n and restored the backup on a 2nd map2n. After restore, all Wireless - Settings ( except the SSID ) were gone, even the wlan - Interface was disabled ! Is this really normal ? Thanks Manfred Yes. Backups via the file list will backup al...
by Genkun
Mon Feb 08, 2016 8:54 am
Forum: Announcements
Topic: v6.34.1 [current] is released!
Replies: 59
Views: 16127

Re: v6.34.1 [current] is released!

RB2011UiAS-2HnD is reporting Voltage as 0.0 V and no temperature too.
No issues here. Also tested on SXT G-5HnD.
by Genkun
Mon Feb 08, 2016 8:41 am
Forum: Announcements
Topic: v6.34.1 [current] is released!
Replies: 59
Views: 16127

Re: v6.34.1 [current] is released!

After update to this version, and some changing of wifi channels for testing, my mobile phone and tablet cannot connect automatically to wireless.
Hardware rb2011uias-2hnd-in.
Ros problem or something else?
I wonder if you are using Apple devices and have not dealt much with WPA setups??
by Genkun
Thu Feb 04, 2016 8:34 am
Forum: Announcements
Topic: v6.34 [current] is released!
Replies: 91
Views: 22937

Re: v6.34 [current] is released!

Can you be more specific? What exactly isn't working? I've upgraded 3-4 devices to 6.34 so far and I haven't got any issues with SNMP (or anything else for that matter) using Cacti, Observium, Dude and custom scripts. I noticed when upgrading a CCR1036 with V6.34. snmp with cacti shows incorrect da...
by Genkun
Tue Feb 02, 2016 11:03 am
Forum: Scripting
Topic: disable/enable ethernet interface script
Replies: 20
Views: 17456

Re: disable/enable ethernet interface script

Brilliant Script Took an hour or so to understand how an array works but eventually got it working like a charm. /system script add name="Port Rate" policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive comment="Check if Ports are Syncing Correctly" source={ :local "ethernetSpeeds" {"eth...
by Genkun
Wed Dec 23, 2015 7:46 am
Forum: General
Topic: v6.33.3 [current] is released!
Replies: 59
Views: 18826

Re: v6.33.3 [current] is released!

Just wanted to congratulate MikroTik on continuing to bring out great advancements in their software. As of late there were a few issues here an there. The most major being that some environment settings have changed as of the 6.3x.xx range. This included the way remote upgrading with the server wou...
by Genkun
Wed Nov 11, 2015 7:33 am
Forum: Announcements
Topic: 6.33 version released!
Replies: 140
Views: 34223

Re: 6.33 version released!

winbox.exe went from 125KB to 1620KB so I can understand that. not so easy to understand why it increased so much in size... I guess they changes the core of WinBox architechture. WinBox used to download (and cache) a set of DLLs from the router on connect, one DLL per RouterOS package (i.e. system...
by Genkun
Mon Sep 21, 2015 12:15 pm
Forum: Beginner Basics
Topic: New RB951G-2HnD bricked? [Solved with Netinstall]
Replies: 28
Views: 47061

Re: New RB951G-2HnD bricked? [Solved with Netinstall]

I Guess you were referring to this link? http://wiki.mikrotik.com/wiki/Manual:System/Packages Thanks for the advice. It worked for me wonderfully. The only difference was that the unit got bricked by installing a backup that had features enabled not support by the RouterOS version, as the OS was not...
by Genkun
Sat Sep 12, 2015 4:52 pm
Forum: General
Topic: Thank you for Partition feature
Replies: 2
Views: 623

Re: Thank you for Partition feature

Just tested this theory of failed-startup for power issue. Still activates the fallback....

You can switch active partition remotely. Although a reboot will be required again.

This might work well with Trigger-automatised upgrades if there is a fail.
by Genkun
Sat Sep 05, 2015 12:59 pm
Forum: Announcements
Topic: v6.32 released [version temporarily removed]
Replies: 116
Views: 30011

Re: v6.32 released [version temporarily removed]

I found it /system package update> set channel=bugfix But now the upgrade feature works slightly differently. /system package update check-for-update download This still reboots automatically just like upgrade command in earlier versions :D Noticed that 6.30.4 doesn't support channel feature. So we ...
by Genkun
Sat Sep 05, 2015 12:52 pm
Forum: Announcements
Topic: v6.32 released [version temporarily removed]
Replies: 116
Views: 30011

Re: v6.32 released [version temporarily removed]

Hi Normis

I am trying to update my script. I have upgraded to 6.31 but i do not see any options in the terminal to change channel= "" and it is always on current channel.

Am i missing something?
by Genkun
Thu Aug 13, 2015 9:11 am
Forum: General
Topic: Email tool, multiple attachments
Replies: 7
Views: 1816

Re: Email tool, multiple attachments

Thank you for the response Jarda. Just another query I have; is it possible to, lets say, to send an e-mail with a single attachment and send other information in the body of the text. Example: :if ([find name="e-mail_backup"]!="") do={remove [find name="e-mail_backup"]} add name=e-mail_backup polic...
by Genkun
Thu Aug 13, 2015 9:00 am
Forum: Announcements
Topic: v6.30.2 bugfix release
Replies: 148
Views: 38170

Re: v6.30.2 bugfix release

Thanks for the wonderful update. Have had a few snags which we fixed internally but there is one error that is quite prevalent. /interface wireless channels add band=5ghz-a/n frequency=5180 list=superchannel2 name=5180 width=20 add band=5ghz-a/n frequency=5190 list=superchannel2 name=5190 width=20 a...
by Genkun
Mon Aug 03, 2015 9:40 am
Forum: Scripting
Topic: Creating Semi-Automating ROS upgrade Script
Replies: 3
Views: 1398

Re: Creating Semi-Automating ROS upgrade Script

This will probably be my last post on this thread. I understand that most of this script was taken from the link provided in post1. I want to thank the creator of that post and also the people who created the scripting ideas for such an innovative idea. I have learnt a lot from recreating and unders...
by Genkun
Sat Aug 01, 2015 1:13 pm
Forum: General
Topic: Email tool, multiple attachments
Replies: 7
Views: 1816

Re: Email tool, multiple attachments

Does anyone know if it is now possible to send 2 attachments as one e-mail with the new updates in software?
by Genkun
Sat Aug 01, 2015 10:49 am
Forum: Scripting
Topic: Creating Semi-Automating ROS upgrade Script
Replies: 3
Views: 1398

Re: Creating Semi-Automating ROS upgrade Script

Regarding my last statement, I have decided to ficus more on what will be going onto the CPE. Here is an example with an e-mail backup added in the case of a crash or corruption of data. /system script add name=rscfetch policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive source={ :if (...
by Genkun
Thu Jul 30, 2015 11:27 am
Forum: Scripting
Topic: Creating Semi-Automating ROS upgrade Script
Replies: 3
Views: 1398

Re: Creating Semi-Automating ROS upgrade Script

I have managed to find an alternative method to do the ROS which is effective. I just do not know how much bandwidth strain it would have if alll CPE's are initialized at once. Clearly a lot. /system script :if ([find name="packageupgrade"]!="") do={remove [find name="packageupgrade"]} add name=pack...
by Genkun
Wed Jul 29, 2015 1:20 pm
Forum: Announcements
Topic: v6.30.2 bugfix release
Replies: 148
Views: 38170

Re: v6.30.2 bugfix release

Once it works on 6.29.1 i'll start testing it on 6.30.2 I am attempting to create a trigger ROS upgrade+downgrade system... so far it is only upgrading and still under construction. Please view my topic here http://forum.mikrotik.com/viewtopic.php?f=9&t=99046 Any help will be much appreciated in mak...
by Genkun
Wed Jul 29, 2015 11:31 am
Forum: Scripting
Topic: Creating Semi-Automating ROS upgrade Script
Replies: 3
Views: 1398

Creating Semi-Automating ROS upgrade Script

Hi I am attempting to re-create a script I found on the wiki http://wiki.mikrotik.com/wiki/Semi-Automating_CPE_ROS/Firmware/script_updates_and_setting_changes So far converting these to work on 6.29.1 with winbox 3.10rc12 is going okay. I am having some trouble with the script and I use Notepad++ to...
by Genkun
Mon Jul 27, 2015 11:37 am
Forum: Wireless Networking
Topic: Mikrotik WISPs: Where?
Replies: 95
Views: 47283

Re: Mikrotik WISPs: Where?

Hi from South Africa

We have 800+ clients.

Using Omni, Sectors, and completely wireless. We currently are 100sq km.

http://www.radioactivewifi.co.za/