Community discussions

Search found 55 matches

by brg3466
Sun Dec 30, 2018 10:43 pm
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 51
Views: 9521

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

@sjoukes Thank you very much for the info ! Really appreciate you dig into it and had some conclusions. Yes, this GKT issue bother me for a long time and Mikrotik actually didn't explain anything about it, neither told us how to solve it. You really did a good job on it and hopefully 6.43.8 solved i...
by brg3466
Wed Dec 05, 2018 6:56 am
Forum: General
Topic: CSS326 keeps losing connection
Replies: 0
Views: 249

CSS326 keeps losing connection

Hi, I have a CCR1009+ CRS328+CSS326 system. both CRS328 and CSS326 connect to the CCR1009 directly. What I found is that every morning, if I plug my laptop to the CSS326, it gets no internet while I have interent if I plug to CRS328. And if you unplug the power and then re-plug it for CSS326, it is ...
by brg3466
Sat Sep 22, 2018 5:33 am
Forum: Announcements
Topic: v6.43.1 [stable] and v6.43.2 [stable] are released!
Replies: 186
Views: 39011

Re: v6.43.1 [stable] and v6.43.2 [stable] is released!

Upgraded to 6.43.2 on CCR1009 (running CAPsMAN), but cannot upgrade the 5 cAPac with 6.42.7 ( running as CAP). Downloaded the OS and put under the /pub in CPAsMAN, then in CAPsMAN> Remote CAP, click upgrade, it doesn't work.
by brg3466
Fri Sep 14, 2018 7:40 pm
Forum: General
Topic: 'local forwarding' Virtual AP isolation from the LAN device on CAPsMAN
Replies: 0
Views: 319

'local forwarding' Virtual AP isolation from the LAN device on CAPsMAN

Hi there, I have a set up of hEX ( main router) + Switch + 5 cAP ac at home. NAS, Printer also connected to switch. CAPsMAN is running on hEX and five cAP ac as CAP with local forwarding mode. Home WiFi and Guest WiFi ( virtural AP) also set up running smoothly. My question: since Virtural APs(gures...
by brg3466
Fri Sep 07, 2018 6:07 am
Forum: General
Topic: CCR1009- PSU2 enetered state FAIL
Replies: 3
Views: 2448

Re: CCR1009- PSU2 enetered state FAIL

thank you for the reply ! So I over-reacted. I don't need to worry about it ?
by brg3466
Thu Sep 06, 2018 10:03 pm
Forum: General
Topic: CCR1009- PSU2 enetered state FAIL
Replies: 3
Views: 2448

CCR1009- PSU2 enetered state FAIL

Hi all,
I have a CCR1009 and I only connect the power to the PSU1, but when I reboot, I found the log shows that " PSU2 entered state FAIL". I didn't connect anything to PSU2, how come it failed ?

Can this message be neglected or I have to fix it ?

Thank you!
by brg3466
Thu Aug 30, 2018 8:04 am
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 51
Views: 9521

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

@opkky can you elaborate a bit ? You change basic rate and support rate to what level ?

I am still suffering from this issue.

Thank you !
by brg3466
Tue Jul 31, 2018 9:40 pm
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 51
Views: 9521

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

anyone who can tell me how to upload photo ? I found a button 'insert image' but cannot upload the photos.

I have some interesting photos shows that both registration table and the log indicate that my iPhone connected to the AP but the iPhone home screen only shows LTE.
by brg3466
Fri Jul 20, 2018 10:23 pm
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 51
Views: 9521

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

Just some update, the support asked me to try to set the CAPsMAN data rates to default. ( because I set the basic rates at 6M).

Anyone who has experienced the group-key time out with the default data rates ?
by brg3466
Tue Jul 17, 2018 11:11 pm
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 51
Views: 9521

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

@Kerbia, I sent the suport.rif file together with the screenshot to support @mikrotik.com , let's see if they can receive it and reply.
by brg3466
Tue Jul 17, 2018 10:16 pm
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 51
Views: 9521

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

I upgraded to 6.42.6 and it ran smoothly until this morning. I found my iPhone was using LTE.... I checked the log and it was again the 'group key time out". "C:\Users\brg34\Pictures\Screenshots\Screenshot (10).png" ( I don't know how to insert the screen shot , didn't find the button in the toolbar)
by brg3466
Mon Jul 09, 2018 10:12 pm
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 51
Views: 9521

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

I do hope that the new firmware can solve this annoying issues. Since months ago, I was trying different configurations to fight this " group key timeout" issue but failed. I will go update the firmware the first thing when I am back home today and see if it happens again. Have to say, it is really ...
by brg3466
Wed Jun 13, 2018 7:34 pm
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 51
Views: 9521

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

@Kerbia. do you get stable wifi under 6.41.4 ? If so, I probably want to switch back as well. The drop of Wifi due to this 'groupkey timeout" really bothered me. Hope that Mikrotik can do something about it and fix it.
by brg3466
Mon Jun 11, 2018 2:46 am
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 51
Views: 9521

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

I used to have lease time for 5 minutes and later I changed to 1hr, but no improvement on the disconnection issues. I changed to 1 day the other day but the disconnection still happened. My firmware is 6.42.3. My wireless setting is very simple , CCR1009 + 3 cAP ac and the CAPsMAN is on CCR1009. I t...
by brg3466
Sat Jun 02, 2018 8:47 pm
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 51
Views: 9521

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

I have reported the same issue on other thread. But I can add here that I have same issues on cAP ac as well. My firmware is 6.42.3. The WiFi will drop and if you check the log, it was “ group key timeout”. And my iPhone goes to LTE until you notice it. It won’t automatically reconnect to WiFi until...
by brg3466
Sat Jun 02, 2018 8:35 pm
Forum: Wireless Networking
Topic: Group key timeout - Disconnected
Replies: 5
Views: 1209

Re: Group key timeout - Disconnected

@Kerbia, any update from the support team at MikroTik ?
by brg3466
Sun May 27, 2018 8:53 am
Forum: Wireless Networking
Topic: Group key timeout - Disconnected
Replies: 5
Views: 1209

Re: Group key timeout - Disconnected

6.42.2 now, the previous version I had same issue.

Please keep me posted if you get any reply from mikrotik support. Thank you !
by brg3466
Thu May 24, 2018 6:57 pm
Forum: Wireless Networking
Topic: Group key timeout - Disconnected
Replies: 5
Views: 1209

Group key timeout - Disconnected

Hi Everyone, Recently, I bought a couple of cAP ac and deployed CAPsMan on my router. But I often encounter the WiFi drop out on my iPhone and laptop. I checked the log and it shows " group key timeout". Once WiFi dropped out, sometiems, my iphone somehow doesn't automatically re-connect and will us...
by brg3466
Sat Mar 31, 2018 2:30 am
Forum: Beginner Basics
Topic: "Check for update" Error [SOLVED]
Replies: 7
Views: 4886

Re: "Check for update" Error [SOLVED]

Thank you , mkx !

Before drop everything in the input , I inserted a filter rule to accept established connection in the input chain. It works now !

And thank all for your valuable inputs , have a nice weekend !
by brg3466
Fri Mar 30, 2018 7:43 pm
Forum: Beginner Basics
Topic: "Check for update" Error [SOLVED]
Replies: 7
Views: 4886

Re: "Check for update" Error [SOLVED]

Hi , I checked firewall filter rules, it seems I found where the issue is. The below filter rule block the dns. 5 ;;; drop all not coming from LAN chain=input action=drop in-interface-list=!LAN log=no log-prefix="" If I disable it, check-for-update works normal. Any suggestion to modify this rule ?
by brg3466
Fri Mar 30, 2018 7:07 pm
Forum: Beginner Basics
Topic: "Check for update" Error [SOLVED]
Replies: 7
Views: 4886

Re: "Check for update" Error [SOLVED]

Hi, thank you for the suggestions. I set the allow-romote-requests to "yes" but doesn't work. Any other suggestions ? [brg3466@CCR1009] > ip dns print servers: 8.8.8.8,8.8.4.4 dynamic-servers: 75.75.75.75,75.75.76.76 allow-remote-requests: yes max-udp-packet-size: 4096 query-server-timeout: 2s query...
by brg3466
Fri Mar 30, 2018 8:58 am
Forum: Beginner Basics
Topic: "Check for update" Error [SOLVED]
Replies: 7
Views: 4886

"Check for update" Error [SOLVED]

Hi, I have a Mikrotik CCR1009, when I want to check for update, it is always error as follows. I have set up DNS, internet works fine. [brg3466@CCR1009] > /system package update check-for-update channel: current current-version: 6.41.3 status: ERROR: could not resolve dns name [brg3466@CCR1009] > ip...
by brg3466
Fri Mar 16, 2018 3:21 am
Forum: RouterBOARD hardware
Topic: CRS326-24G-2S+RM (CRS328-24P-4S+RM) - Routing fast enough for home vDSL requirements?
Replies: 10
Views: 3326

Re: CRS326-24G-2S+RM (CRS328-24P-4S+RM) - Routing fast enough for home vDSL requirements?

My friend recently bought a CRS112-8P-4S, it powers 3 IP cameras and 2 wAP ac. so the topology is modem - CRS - wAP ac. He also has a RB750Gr3. But since the CRS can configure as a router , he took away the RB750. But he felt the speed got slower compared to Modem- RB750- CRS - wap ac. He has a 150M...
by brg3466
Sun Mar 11, 2018 2:02 am
Forum: General
Topic: L2TP/IPSec VPN can access LAN but not Router [SOLVED]
Replies: 12
Views: 4051

Re: L2TP/IPSec VPN can access LAN but not Router [SOLVED]

Hi Sindy,

I tried the other way you suggested just as an experiment, i.e. create a static interface of <l2tp-vpn> and add it to the LAN.

It works as well !!!

Really learn a lot from you ! Thank you for sharing your knowledge on this topic !
by brg3466
Sat Mar 10, 2018 10:41 pm
Forum: General
Topic: L2TP/IPSec VPN can access LAN but not Router [SOLVED]
Replies: 12
Views: 4051

Re: L2TP/IPSec VPN can access LAN but not Router [SOLVED]

Hi Sindy, Thank you for such a detailed explanation for this issue ! Really appreciated your great help ! I modified the rule 7 as per your suggestion and it works !!! Now I can remotely access the whole LAN network including the Router. :-) As to your question regarding on the 'untracked' in rule 1...
by brg3466
Sat Mar 10, 2018 4:06 am
Forum: General
Topic: L2TP/IPSec VPN can access LAN but not Router [SOLVED]
Replies: 12
Views: 4051

Re: L2TP/IPSec VPN can access LAN but not Router [SOLVED]

Hi, I tried but no luck ! The linked topic has much more complicated firewall rules than mine. I just have the default config and activate the L2TP/IPsec VPN server on the main router. - set DHCP server for VPN, enable L2TP,....., etc. I can get VPN from my iPhone without any problem, and I can remo...
by brg3466
Wed Mar 07, 2018 9:24 am
Forum: Wireless Networking
Topic: hAP ac + wAP ac (as Wi-Fi coverage improvement).
Replies: 16
Views: 1911

Re: hAP ac + wAP ac (as Wi-Fi coverage improvement).

Try to set up the wAP ac under Quick set as below to see if it works: 1. Select WISP mode 2. Use the same SSID and password as hAP ac 3. On the right side, select ‘bridge’ instead of ‘router’ 4. Select address acquisition as ‘static’ IP address instead of ‘automatic’ 5. Assign IP address ,eg, 192.16...
by brg3466
Tue Mar 06, 2018 12:54 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 3695

Re: 2nd router no internet access [SOLVED]

Hi Sob, anav, After I updated the ROS to 6.41.2, it works now, don't know why before it doesn't work. Anyway, here below is the set up. Would like to thanks everyone who provide their expertise on this topic, especailly Sob and Anav, really appreciated your patience and guidance. Next issue will be ...
by brg3466
Mon Mar 05, 2018 7:18 pm
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 3695

Re: 2nd router no internet access [SOLVED]

Hi all, I did another test , I replaced the hAP2 ( switch)with a real unmanaged switch (a netgear 8 port swtich) , and then I connected hAP1 to the switch. so it is RB3011 - netgear Switch - hAP1. And I GOT INTERNET on hAP1. This is beyond my understanding, I assume bridge is transparent, so it shou...
by brg3466
Mon Mar 05, 2018 6:38 pm
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 3695

Re: 2nd router no internet access [SOLVED]

@ Sob, thank you so much ! I finally get the internet through !!! I connected the hAP lite (hereafter called hAP1) to RB3011 directly and it get internet, then I connected it back to the Study wallplate socket, no internet. then I recalled I used another hAP ( hereafter called hAP2) behind the wall ...
by brg3466
Mon Mar 05, 2018 8:31 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 3695

Re: 2nd router no internet access [SOLVED]

@ 2frogs
Thank you for the explanation ! I will try it to see if different.
by brg3466
Mon Mar 05, 2018 6:19 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 3695

Re: 2nd router no internet access [SOLVED]

@2frogs
Any reason for doing this ? I thought it is the same , the other end of the cable behind the wall goes to lan port of 3011, I think hap is directly connected to 3011 lan port in this way.
by brg3466
Mon Mar 05, 2018 5:25 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 3695

Re: 2nd router no internet access [SOLVED]

@anav
have you tried with the 2nd router with default settings ? Did you get
Internet ?

The weird thing is if I replace RB3011 with hAP ( default configuration) , I can get internet.
by brg3466
Mon Mar 05, 2018 5:18 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 3695

Re: 2nd router no internet access [SOLVED]

Hi all, NO LUCK ! What I did is to reset the configuration to factory settings, then change the IP address to 192.168.10.1/24 on the bridge and change the default dhcp pool to 192.168.10.10-192.168.10.254 .... Herebelow are the settings, I think I didn't miss anything. # jan/02/1970 00:02:35 by Rout...
by brg3466
Mon Mar 05, 2018 4:47 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 3695

Re: 2nd router no internet access [SOLVED]

Hi all,
Really appreciated your great help !

I will reset the hAP lite to default configuration and do it over again. i.e change the IP pool , LAN address and the DNS accordingly. See if it will work.
Will let you know in half an hour.

Thanks again !
by brg3466
Mon Mar 05, 2018 3:20 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 3695

Re: 2nd router no internet access [SOLVED]

@CZFan: There's DHCP client on WAN and default masquerade. You can argue that it's not the best config, but it should work. @brg3466: Try also: - "tracert 8.8.8.8" from laptop - "/tool traceroute 8.8.8.8" from router - "/ip dhcp-client print", "/ip address print" and "/ip route print" on router @So...
by brg3466
Mon Mar 05, 2018 12:58 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 3695

Re: 2nd router no internet access [SOLVED]

@sob
my laptop has 8.8.8.8 as dns server (use ipconfig/all)
and ping 8.8.8.8 will not get through. " request timed out'

@CZfan
Could you elaborate a bit how to do it ?
by brg3466
Sun Mar 04, 2018 11:07 pm
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 3695

Re: 2nd router no internet access [SOLVED]

Hi Anav, thanks for simulating my situation. Do you get internet ? I tried Scenario # 3 again and even below #4 , but no luck. :-( I still cannot get internet. My laptop always shows ' The DNS name does not exist'. /ip dhcp-server network add address=192.168.10.0/24 comment=defconf dns-server=8.8.8....
by brg3466
Sun Mar 04, 2018 10:06 pm
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 3695

Re: 2nd router no internet access [SOLVED]

Many thanks !

I will set to Scenario #3. and reboot the 2nd router and restart my laptop to see what happens !

Will keep you informed of the result !
Cheers !
by brg3466
Sun Mar 04, 2018 9:30 pm
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 3695

Re: 2nd router no internet access [SOLVED]

Hi both, I appreciated your fast response and help ! I am a bit confused. This goes back to the scenario 1. If you look back the first config rsc file I posted, it is what you suggested now. Scenario #1 /ip dhcp-server network add address=192.168.10.0/24 comment=defconf gateway=192.168.10.1 /ip dns ...
by brg3466
Sun Mar 04, 2018 9:48 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 3695

Re: 2nd router no internet access [SOLVED]

/ip address add address=192.168.10.1/24 comment=defconf interface=ether2 network=192.168.10.0 This should be on bridge, but it's not the problem. /ip dhcp-server network add address=192.168.10.0/24 comment=defconf gateway=192.168.10.1 This needs dns-server=192.168.10.1 to give DNS resolver to clien...
by brg3466
Sun Mar 04, 2018 2:56 am
Forum: General
Topic: L2TP/IPSec VPN can access LAN but not Router [SOLVED]
Replies: 12
Views: 4051

Re: L2TP/IPSec VPN can access LAN but not Router [SOLVED]

Have a look at this topic . If you don't find the answer there, come back. Have a look at this topic . If you don't find the answer there, come back. Hi Sindy, Thank you for the help. Looks like the linked topic has the same issue as me. I will look throough carefully and see if I can solve it with...
by brg3466
Sun Mar 04, 2018 1:54 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 3695

Re: 2nd router no internet access [SOLVED]

Thank you so much for the help ! I double checked the settings: check that you have wan port. - Ethernet cable from wallplate to WAN port of hAP lite. check that you have a default GW and ip to wan port. - It is default setting, so there is DHCP client on WAN port, and I can see that hAP lite got a ...
by brg3466
Fri Mar 02, 2018 10:55 pm
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 3695

2nd router no internet access [SOLVED]

Hi all, My house has a main router RB3011 and wired from LAN Port to different rooms. So every room has internet access. The network is 192.168.88.0/24. Now at my Study, I want to have a different network 192.168.10.0/24. I plug the ethernet cable from wallplate to hAP lite WAN port, setting the mod...
by brg3466
Fri Mar 02, 2018 6:53 pm
Forum: Beginner Basics
Topic: L2TP/IPsec VPN
Replies: 9
Views: 1255

Re: L2TP/IPsec VPN

do you have anything connected to your router, say , a NAS. If you key in the IP address of your NAS after the VPN is established, do you see the NAS log in screen ?
by brg3466
Fri Mar 02, 2018 6:33 pm
Forum: General
Topic: L2TP/IPSec VPN can access LAN but not Router [SOLVED]
Replies: 12
Views: 4051

L2TP/IPSec VPN can access LAN but not Router [SOLVED]

Hello everyone, I am a newbie on Mikrotik. In my house, I have a RB750G ( 192.168.88.1) as the router and have 2 hAP lite as wireless AP ( 192.168.88.2, 192.168.888.3) + one NAS (192.168.88.4) connected to the LAN port of RB750G. I set up the L2TP/IPsec VPN in order to remotely access my home networ...
by brg3466
Sun Dec 17, 2017 10:08 am
Forum: Announcements
Topic: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!
Replies: 109
Views: 29282

Re: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!

Good to see some new products !

Would like to know if any of below are in the pipeline :
- CAP AC
- MU- MIMO AP


Thank you !
by brg3466
Tue Jun 06, 2017 3:21 am
Forum: General
Topic: iPhone cannot connect to L2TP VPN server
Replies: 2
Views: 805

Re: iPhone cannot connect to L2TP VPN server

thank you ,hgonzale ! I think I used the L2TP/IPsec in the router. What puzzled me is that I can connect laptop to the L2TP server, only iPhone cannot connect to the server. I don't know what mistake I made in the setup of the server in the router, or I just made some mistakes in the setup on the iP...
by brg3466
Mon Jun 05, 2017 4:56 am
Forum: General
Topic: iPhone cannot connect to L2TP VPN server
Replies: 2
Views: 805

iPhone cannot connect to L2TP VPN server

Hi everyone, I have a Mikrotik 3011 and set up the L2TP server on 3011 recently. My laptop (windows 10) can successfully connect to the L2TP server but my iPhone cannot. On the iPhone, there is only 3 types of VPN you can choose, IKEv2, IPsec, L2TP, so I pick the L2TP. But it always shows " The L2TP...
by brg3466
Fri Dec 02, 2016 6:33 am
Forum: Beginner Basics
Topic: Router cannot get IP Address
Replies: 3
Views: 1504

Router cannot get IP Address

Hi everyone, I recently installied a linksys MODEM DPC3008 for Comcast cable internet. I can get internet if I have my laptop directly wired to modem. But if I add a router (RB750Gr2) connected to the modem , there is no internet. I logged on to the 750, and found the router didn't get WAN IP addres...
by brg3466
Tue Sep 08, 2015 9:43 am
Forum: Beginner Basics
Topic: Setup second router as access point
Replies: 11
Views: 8629

Re:

Have you checked what I wrote before??
I checked and set the DNS same as the first layer router, but it still doesn't work. Any suggestion ?
by brg3466
Thu Aug 06, 2015 5:08 am
Forum: Beginner Basics
Topic: Setup second router as access point
Replies: 11
Views: 8629

Re: Setup second router as access point

Hi, I usually only update the first router and didn't care too much for the second layer ones. Since you mentioned, I tried. You are right ! I have the same issue. The second layer routers cannot update the firmware.
by brg3466
Tue Aug 04, 2015 9:27 am
Forum: Beginner Basics
Topic: Setup second router as access point
Replies: 11
Views: 8629

Re: Setup second router as access point

Hi, I don't quite understand "cannot look for update on the Internet" but I have more or less the same set up for your info. I have the first router , and then 3 hAP , as the second layer router , connected to the first one by cable. What I do is to turn off DHCP on the second layer routers, change ...
by brg3466
Sun Aug 02, 2015 6:25 am
Forum: Beginner Basics
Topic: Guest WiFi, but it does not have internet access
Replies: 8
Views: 2825

Re: Guest WiFi, but it does not have internet access

Hi Normis, I have tried your way and it worked when I wanted to set the guest wifi. But recently, I used 2 hAP lite as the access point only and connected them to my Comcast gateway ( modem/router combo), in the quick set , I also tried to set guest wifi . But there is no internet, you can only see ...
by brg3466
Sat Aug 01, 2015 7:54 am
Forum: Wireless Networking
Topic: how to set guest wifi if the hAP lite is used only as an access point ?
Replies: 0
Views: 1018

how to set guest wifi if the hAP lite is used only as an access point ?

Hi everyone, I have a problem with the set up of guest wifi : - I have 3 RB941-2nD (hAP lite 2.4G) connected to my Comcast gateway (modem/router combo , IP address 10.0.0.1) and put in different rooms in my house - I changed the IP address of hAPs to 10.0.0.2, 10.0.0.3, 10.0.0.4 respectively and tur...