Community discussions

MikroTik App

Search found 117 matches

by brg3466
Sun Jul 25, 2021 2:24 am
Forum: RouterBOARD hardware
Topic: MikroTik RB5009UG+S+IN
Replies: 43
Views: 4420

Re: MikroTik RB5009UG+S+IN

The 2.5G port works well for me. Recently, the ISP here in the states, Comcast, upgraded the bandwidth to about 1500Mbps and the modem from Comcast also comes with 2.5G port. With 5009, I can use this 2.5G port to connect to the modem and the sfp+ to my CRS switch. It is perfect !
by brg3466
Thu Jul 15, 2021 5:34 am
Forum: RouterOS v7 BETA
Topic: How to upgrade LtAP mini LTE US Kit modem in v7.1beta6
Replies: 0
Views: 303

How to upgrade LtAP mini LTE US Kit modem in v7.1beta6

Hi, I have a LtAP mini LTE Kit US, It works fine on v6. 47.X, and v6.48.x Under v6.48.3, I can see the modem version is up to date : [brg3466@LtAP] > /interface lte firmware-upgrade lte1 once installed: R11eL_v16.02.183961 latest: R11eL_v16.02.183961 But after I upgraded to v7.1beta6, the LTE interf...
by brg3466
Sun Jun 27, 2021 1:08 am
Forum: General
Topic: ROS 6.38 serious DHCP server problem
Replies: 118
Views: 49393

Re: ROS 6.38 serious DHCP server problem

[/quote] Also -- regarding DHCP offered WITHOUT success. I've seen this issue for following reasons: A) Issue lies with your interface BRIDGE configuration. Are you using vlans? be sure to check your bridge configuration and vlan assignment / pvid settings.. B) Device is out of range to AP or you ha...
by brg3466
Sat Jun 12, 2021 8:35 pm
Forum: General
Topic: DHCP Offering Lease Without Success
Replies: 83
Views: 51236

Re: DHCP Offering Lease Without Success

Hi, I am puzzled by this issue for a long time and so far no solution. I have several vlan running on bridge and each vlan has its own dhcp server. Selecting STP protocal mode to "none" on bridge , and uncheck "Always Broadcast" on the dhcp server is not a cure. It still occurred...
by brg3466
Tue May 18, 2021 10:28 pm
Forum: Scripting
Topic: Black list for failed login to IPSec VPN
Replies: 11
Views: 7914

Re: Black list for failed login to IPSec VPN

I agree. With 3 formats of time, it is very confusing. Better to have just one uniform format.

Back to the topic, how to get the past, say, 10minutes log if we don't use Jotne's script ?
by brg3466
Tue May 18, 2021 9:10 pm
Forum: Scripting
Topic: Black list for failed login to IPSec VPN
Replies: 11
Views: 7914

Re: Black list for failed login to IPSec VPN

@Jotne, I would like to use your script. But may I know how to set up the system clock so that [/log find time>([/system clock get time] - 60m) message~"xxx"] works. I found it only works with GMT 0 time. My setup is below, and script doesn't work since afternoon local time ( in GMT 0 , it...
by brg3466
Tue May 04, 2021 8:48 am
Forum: General
Topic: ROS 6.38 serious DHCP server problem
Replies: 118
Views: 49393

Re: ROS 6.38 serious DHCP server problem

@Ferrograph Did you finally find a fix ? I am running 6.48.2 but still see it from time to time.
by brg3466
Tue Apr 27, 2021 1:22 am
Forum: General
Topic: L2Tp/IPsec site to site VPN
Replies: 0
Views: 427

L2Tp/IPsec site to site VPN

Hi everyone, I have 2 sites with Mikrotik routers facing internet. I set up Router A as L2TP server. and I want to set up Router B as L2TP client. My cellphone can connect to Router A (with my LTE data), so I assume the L2TP server set up is correct. But if I want to set router B as the L2TP client,...
by brg3466
Mon Mar 22, 2021 6:30 am
Forum: Beginner Basics
Topic: lte1 not selectable for dhcp-client
Replies: 10
Views: 1342

Re: lte1 not selectable for dhcp-client

solved !
I wiped out all the configurations and use quick-set "LTE AP" and under IP>DHCP-client, you can see the lte1 is configured as DHCP-client, though its status is "stopped".

But I still don't know why I cannot select it as DHCP-client before.
by brg3466
Tue Mar 16, 2021 7:33 am
Forum: Beginner Basics
Topic: lte1 not selectable for dhcp-client
Replies: 10
Views: 1342

Re: lte1 not selectable for dhcp-client

Same problem +1 !

I have a ltAP mini LTE US version and cannot select lte1 as the interface for dhcp-client.
by brg3466
Sat Mar 06, 2021 11:19 pm
Forum: Wireless Networking
Topic: Anyone who successfully install wifiwave2 on cAP ac with 256M RAM ?
Replies: 10
Views: 1164

Re: Anyone who successfully install wifiwave2 on cAP ac with 256M RAM ?

Let’s see if Mikrotik is willing to do something about it. Would be nice if the existing products out there could take the advantage of wave2.
by brg3466
Sat Mar 06, 2021 9:48 pm
Forum: Wireless Networking
Topic: Anyone who successfully install wifiwave2 on cAP ac with 256M RAM ?
Replies: 10
Views: 1164

Re: Anyone who successfully install wifiwave2 on cAP ac with 256M RAM ?

@gotsprings,
Thank you for the reminder ! I noticed that it is not compatible with CAPsMAN before I tried to install the wave2. My problem is that I even cannot install the wave2 package on the device.
by brg3466
Thu Mar 04, 2021 1:17 am
Forum: Wireless Networking
Topic: Anyone who successfully install wifiwave2 on cAP ac with 256M RAM ?
Replies: 10
Views: 1164

Re: Anyone who successfully install wifiwave2 on cAP ac with 256M RAM ?

Probably it is because of the 16M storage size. The official documents said " it is required at least 10M free space" . cAP ac has total of 16M storage , most likely , there is no 10M left for wave2 package.
by brg3466
Thu Mar 04, 2021 12:41 am
Forum: Wireless Networking
Topic: Anyone who successfully install wifiwave2 on cAP ac with 256M RAM ?
Replies: 10
Views: 1164

Re: Anyone who successfully install wifiwave2 on cAP ac with 256M RAM ?

My bad, I forgot to check the log !

Since it didn't work, I downgraded to 6.47.9 and restore the backup as a CAP (managed by CAPsMAN) after several failed trials on wave2.

I really hope there is a successful case out there with the 256M RAM cAP ac. :-)
by brg3466
Wed Mar 03, 2021 9:03 pm
Forum: Wireless Networking
Topic: Anyone who successfully install wifiwave2 on cAP ac with 256M RAM ?
Replies: 10
Views: 1164

Anyone who successfully install wifiwave2 on cAP ac with 256M RAM ?

Hi, Fortunately, I found my cap ac is with 256M RAM, so I decided to try the 7.1beta4 with wave2. But somehow I cannot install the extra package of wifiwave2, reboot for a couple of times and it still cannot installed. Anyone who has install the wave2 successfully on cap ac with 256M RAM ? Thank you...
by brg3466
Fri Feb 12, 2021 8:06 pm
Forum: General
Topic: Checking Data used in simcard
Replies: 1
Views: 305

Re: Checking Data used in simcard

Hi,
you can refer to this thread. it is very informative.
viewtopic.php?f=13&t=87565
by brg3466
Sun Feb 07, 2021 6:10 am
Forum: Wireless Networking
Topic: Force client to specific AP...
Replies: 7
Views: 1143

Re: Force client to specific AP...

Can't find area-prefix in CAPsMAN configuration and there is no connection-list as well.
by brg3466
Fri Feb 05, 2021 9:50 pm
Forum: Scripting
Topic: Print Command
Replies: 4
Views: 1915

Re: Print Command

This will get all interface in to array list and then print it:
This is exactly what I want. I tried with "print as-value" but no luck. Looks like it is not possible to "print as-value" for only one properties/field.
Thank you !
by brg3466
Thu Feb 04, 2021 7:35 am
Forum: Scripting
Topic: Print Command
Replies: 4
Views: 1915

Re: Print Command

Hi, I have a similar question it is not print the output in the terminal , but to the array. Let's say , > :global a [/interface print as-value] , and you will get an array with all the interfaces info, If I just want to get the names of the interface in the array, how to get it ? the expected resul...
by brg3466
Tue Jan 26, 2021 8:18 pm
Forum: General
Topic: anyone using LtAP mini on Verizon is the US?
Replies: 8
Views: 760

Re: anyone using LtAP mini on Verizon is the US?

Thanks, I really hate doing business with AT+T but might be stuck with them. Did you get a firstnet card or regular consumer one? I just have a regular consumer one. ( So I have two sim card, the regular one for my iphone and the other one, which is the data card for tablet installed on my LtAP min...
by brg3466
Tue Jan 26, 2021 6:16 am
Forum: General
Topic: anyone using LtAP mini on Verizon is the US?
Replies: 8
Views: 760

Re: anyone using LtAP mini on Verizon is the US?

Hi, I use AT&T sim card on LtAP mini. It will be quite difficult if you want to use the voice card (the normal one we put in our phone), instead, I applied for a unlimited data card ( eg. for tablet, no voice function). And it works quite well.
by brg3466
Tue Dec 22, 2020 3:10 am
Forum: Useful user articles
Topic: Mikrotik (behind NAT) to Mikrotik IPSEC/IKE2 (with certs) tunnel + EoIP
Replies: 10
Views: 3915

Re: Mikrotik (behind NAT) to Mikrotik IPSEC/IKE2 tunnel + EoIP on top of that

This helps a lot ! I just have one Mikrotik router behind the NAT and I don't want to use road-warrior mode because I want the server to get access to client as well. Thanks ! In fact , I have 2 questions: 1. on both Router A and Router B, you have a NAT rule, like below, why we need this rule: /ip ...
by brg3466
Fri Dec 04, 2020 9:49 pm
Forum: General
Topic: Access to specific domain over IPsec tunnel
Replies: 2
Views: 518

Re: Access to specific domain over IPsec tunnel

@Sindy, thank you for the reply ! #1, you are right ! it is the NAT issue. I added a NAT rule , but it doesn't work well because of the changeable ip address of the google domain, which comes my 2nd question. #2. Is there a better way, as far as you know, to only router traffic visiting google over ...
by brg3466
Fri Dec 04, 2020 3:44 am
Forum: General
Topic: Netinstall doesn't work.
Replies: 2
Views: 368

Re: Netinstall doesn't work.

I just did it a couple of weeks ago. Herebelow are my suggestions: 1. if you use win10 , better to set netinstall to run win7 compatibility mode 2. turn off all firewall, etc on your laptop/PC 3. if you have more than 1 NICs, turn off all others except the one you will use to connect the router Afte...
by brg3466
Fri Dec 04, 2020 2:24 am
Forum: General
Topic: Access to specific domain over IPsec tunnel
Replies: 2
Views: 518

Access to specific domain over IPsec tunnel

Hello, I established the ipsec tunnel betwen Router G and Router N, subnet of G and N can communicate between each other successfully. Is it possible that if subnet of N want to visit a specific domain, say, www.google.com, traffic will be routed over the tunnel ? My setup is as follows: G: wan ip: ...
by brg3466
Thu Nov 26, 2020 12:00 am
Forum: General
Topic: Remote WAN access over IPSEC Tunnel
Replies: 9
Views: 970

Re: Remote WAN access over IPSEC Tunnel

@Sindy, thank you for the detailed explanations ! I got it now. It is good to know 'why' besides 'how to'. Thank you and have a nice holiday !
by brg3466
Wed Nov 25, 2020 7:51 am
Forum: General
Topic: Remote WAN access over IPSEC Tunnel
Replies: 9
Views: 970

Re: Remote WAN access over IPSEC Tunnel

@Sindy, thank you so much and really appreciate your time ! The disable/enable played the trick. Finally it is up ! In order to let the PC go out of Router-G WAN, have to add one NAT rule. /ip firewall nat add action=accept chain=srcnat dst-address=192.168.3.0/24 add action=accept chain=srcnat src-a...
by brg3466
Tue Nov 24, 2020 3:47 am
Forum: General
Topic: Buying advice + need help understanding performance / Test Results
Replies: 8
Views: 727

Re: Buying advice + need help understanding performance / Test Results

@henrik27, maybe you can take a look at CRS328-24P-4S+. I have 7 cAP ac and 8 IP camera which are powered by this POE switch. I have used it for about a couple of years and it is pretty good.
by brg3466
Tue Nov 24, 2020 3:36 am
Forum: General
Topic: Remote WAN access over IPSEC Tunnel
Replies: 9
Views: 970

Re: Remote WAN access over IPSEC Tunnel

Hi Sindy, thank you for your reply ! I tried to add this policy for a specific IP in the subnet , but seems doesn't work. My setup is : Router G: wanip-10.10.10.66, subnet-192.168.3.0/24 Router N: wanip-192.168.99.149 subnet-192.168.4.0/24, PC in the subnet: 192.168.4.254 After I config the ipsec tu...
by brg3466
Mon Nov 23, 2020 6:41 am
Forum: General
Topic: Remote WAN access over IPSEC Tunnel
Replies: 9
Views: 970

Re: Remote WAN access over IPSEC Tunnel

Any suggestions how to achieve it ?

Image
by brg3466
Sun Nov 22, 2020 6:30 am
Forum: General
Topic: Remote WAN access over IPSEC Tunnel
Replies: 9
Views: 970

Re: Remote WAN access over IPSEC Tunnel

@Sindy, I tried your suggestion to route All the LAN1 traffic out of WAN2 (staying with traffic matching method). It works ! But when looking into the link, https://wiki.mikrotik.com/wiki/Routing_through_remote_network_over_IPsec it seems the application is one specific device (10.10.10.23) in LAN1 ...
by brg3466
Mon Nov 16, 2020 4:34 am
Forum: Scripting
Topic: how to get log records for last 5 mins?
Replies: 11
Views: 3270

Re: how to get log records for last 5 mins?

Hi , I found something else. As long as the today's date/time format includes date, the script doesn't work. If the today's log only show time, then it works. Question: why today's log sometimes show date and sometimes not ? below it shows date again. But this morning, there was no date, only time. ...
by brg3466
Sun Nov 15, 2020 8:12 pm
Forum: Scripting
Topic: how to get log records for last 5 mins?
Replies: 11
Views: 3270

Re: how to get log records for last 5 mins?

The routerOS acts funny. The problem yesterday was the format of the log. This morning, when i run the CLI again, it works. And as you said, the current day log only shows the time. No idea what happened yesterday. :-) nov/14 23:24:47 system,info,account user brg3466 logged out from 192.168.3.25 via...
by brg3466
Sun Nov 15, 2020 8:53 am
Forum: Scripting
Topic: how to get log records for last 5 mins?
Replies: 11
Views: 3270

Re: how to get log records for last 5 mins?

Hi Jotne, Thanks for the reply ! This is weird ! See below. It doesn't work on mine. nov/14 21:09:57 system,info,account user brg3466 logged in from 192.168.3.25 via telnet nov/14 21:16:04 system,info,account user brg3466 logged out from 192.168.3.25 via telnet nov/14 21:18:14 system,info changed sc...
by brg3466
Sun Nov 15, 2020 6:05 am
Forum: Scripting
Topic: how to get log records for last 5 mins?
Replies: 11
Views: 3270

Re: how to get log records for last 5 mins?

ros code
/log print where time>([/system clock get time] - 5m)
The above code seems doesn't work on 6.47.7 , anyone have the solution ?

Thanks!
by brg3466
Mon Nov 09, 2020 9:02 pm
Forum: General
Topic: How to move files to different folder within the router in Script
Replies: 3
Views: 677

Re: How to move files to different folder within the router in Script

@jebz, @mkx, thank you both for the explanation and help ! I will try the workaround suggested by jebz. On other note, I did try to create the loopback interface ( ip: 1.1.1.1/32) and add it in the LAN address-list, so the LAN address-list includes bridge (ether2-ether5) and the loopback , and I cre...
by brg3466
Mon Nov 09, 2020 3:36 am
Forum: General
Topic: How to move files to different folder within the router in Script
Replies: 3
Views: 677

How to move files to different folder within the router in Script

Hi everyone, I have to move file from one folder to another within the router itself. It is easy to do it by "drag and drop" in winbox but for some reason I have to do it in the script. The only way I can think of is to use "fetch" to copy the file. But I got stuck here. Let's sa...
by brg3466
Mon Oct 12, 2020 9:02 pm
Forum: Scripting
Topic: script works in terminal windwo but not in scheduler [SOLVED]
Replies: 3
Views: 645

Re: script works in terminal windwo but not in scheduler [SOLVED]

@mrz, @eworm, thank you both for the tips. I read mrz's thread and realized that console number doesn't work. It is a very informative thread ! I wish I could have read it earlier. :-)
A long way to go for good scripting !
by brg3466
Sun Oct 11, 2020 11:46 pm
Forum: Scripting
Topic: script works in terminal windwo but not in scheduler [SOLVED]
Replies: 3
Views: 645

script works in terminal windwo but not in scheduler [SOLVED]

Hello, I tried to download the backup file in cloud and if I open a new terminal and write below, it works fine. [brg3466@CCR1009] > { {... #get backup file download key {... :local key [/system backup cloud get number=0 secret-download-key]; {... {... # get cloud backup file {... /system backup clo...
by brg3466
Mon Oct 05, 2020 11:26 pm
Forum: Beginner Basics
Topic: MT Router works as VPN server but not as VPN client
Replies: 2
Views: 381

Re: MT Router works as VPN server but not as VPN client

Hi bpwl, Thank you for the help ! Please find below the config on router B. Router A is almost the same, basically it is all default. BTW, I tried disabling all firewall rules on A and B, they still cannot connect. # model = 960PGS # serial number = /interface bridge add admin-mac=64:D1:54:4B:66:37 ...
by brg3466
Mon Oct 05, 2020 10:17 pm
Forum: Beginner Basics
Topic: MT Router works as VPN server but not as VPN client
Replies: 2
Views: 381

MT Router works as VPN server but not as VPN client

Hi guys, I have 2 Mikrotik routers (say router A and B) in different places with public IP address. so I enabled both as L2TP/IPsec server and PPTP server. I can connect to A and B if I use my iphone with data. ( or PC with iphone hotspot can connect to A and B as well). But the weird thing is if my...
by brg3466
Fri Sep 25, 2020 7:14 pm
Forum: Scripting
Topic: send script output to a file
Replies: 13
Views: 5658

Re: send script output to a file

@bluecrow76 @sib, thank you for your reply ! Finally figured out why it failed before. :-)
In "execute script=$a .... " the $a must be an expression instead of a script name.
by brg3466
Wed Sep 23, 2020 2:19 am
Forum: Scripting
Topic: send script output to a file
Replies: 13
Views: 5658

Re: send script output to a file

@bluecrow76 May I know what is your RouterOS version, It seems " execute script=$a file=$filename" only works in early version such as 6.45.9, it doesn't work on 6.47.3.
by brg3466
Fri Aug 07, 2020 3:54 am
Forum: RouterBOARD hardware
Topic: CCR1009-7G-1C-1S+ Micro SD / Memory card
Replies: 12
Views: 3741

Re: CCR1009-7G-1C-1S+ Micro SD / Memory card

I tried ScanDisk 16G microSD card and it doesn't work. The CCR1009 cannot discover it.
by brg3466
Sun Jul 12, 2020 10:36 pm
Forum: Beginner Basics
Topic: Kid Control - Time limitation
Replies: 5
Views: 2132

Re: Kid Control - Time limitation

Hi Weweinet, thank you so much for the quick reply. It helps a lot ! I tried the above. Kids device IP successfully added to the internet_ok and internet_overtime address list. But it seems once the kids device IP address has been purged from the "overtime" address list, it starts over aga...
by brg3466
Sun Jul 12, 2020 8:15 am
Forum: Beginner Basics
Topic: Kid Control - Time limitation
Replies: 5
Views: 2132

Re: Kid Control - Time limitation

Hi WeWinet, I looked into your filter rules and have a question: #2 "dst-address=kids-ip-address/24 dst-address-list=Kids_Internet_ok" #4 src-address=!0.0.0.0 src-address-list=kids_Mobile under#2 , Is it necessary to have "kids-ip-address/24" while you have "dst-address-list...
by brg3466
Tue Jul 07, 2020 1:53 am
Forum: General
Topic: DHCP Offering Lease Without Success
Replies: 83
Views: 51236

Re: DHCP Offering Lease Without Success

Hi, any solution for this ? I recently encountered "DHCP offering lease without success" problem. DHCP server is running on vlan and providing IP address to wireless clients (mainly apple devices). I noticed that once the dhcp offering lease without success, the mac address of the device i...
by brg3466
Wed Apr 29, 2020 9:35 pm
Forum: Wireless Networking
Topic: wAP AC - 5Ghz wireless very slow
Replies: 13
Views: 3302

Re: wAP AC - 5Ghz wireless very slow

Couple of suggestions: Turn of a, only use n/ac Don't use anything other then WPA2-AES Distance Indoors (if used indoors) Turn on WMM Rates: 12/24 (basic) and 12 - 54 (supported) Choose channel manually Lower (max) transmission power by 3dB @erlinden,could you please let me know where in CAPsMAN to...
by brg3466
Wed Apr 29, 2020 4:19 am
Forum: Wireless Networking
Topic: wAP AC - 5Ghz wireless very slow
Replies: 13
Views: 3302

Re: wAP AC - 5Ghz wireless very slow

I have the same issue. I have wap ac and cap ac connected to the router with capsman. Never exceed 300mbps on WiFi although I have 1Gbps connection from ISP.
by brg3466
Tue Apr 14, 2020 12:29 am
Forum: Wireless Networking
Topic: CAPsMAN multiple SSIDs, local forwarding, bridging on CAP
Replies: 4
Views: 3020

Re: CAPsMAN multiple SSIDs, local forwarding, bridging on CAP

@davedave, I have a similar setup with cAP ac controlled by CAPsMAN with local forwarding mode. I found local forwarding has a better wifi speed compared to CAPsMAN manager mode. When configuring bridge on the cAP, I only add ether1 (and ether2 if you want) to the bridge, the wlan (including the vir...
by brg3466
Sat Mar 28, 2020 7:20 am
Forum: Beginner Basics
Topic: One bridge for VLANs or multiple?
Replies: 16
Views: 3931

Re: One bridge for VLANs or multiple?

@mkx. I did find that if I use discovery-interface=bridge1, and turn on vlan filtering, the AP is not stable from time to time, sometimes the AP lost connection to the CAPsMAN, So in your opinion, it is better to use discovery-interface=vlan99 or to use ether1 ? ( BTW, I set a dhcp client on vlan99,...
by brg3466
Fri Mar 27, 2020 2:28 am
Forum: Beginner Basics
Topic: One bridge for VLANs or multiple?
Replies: 16
Views: 3931

Re: One bridge for VLANs or multiple?

@cyb, I have a question on your config of cAP ac : I guess you connect your cAP ac to switch via eth1. so eth1 is a trunk port for W1, W2, W3 and Vlan100-mgmt, then why you assign PVID100 to eth1 and the bridge ? Thank you ! ____________ /interface bridge add name=br protocol-mode=none pvid=100 vlan...
by brg3466
Wed Mar 25, 2020 6:37 pm
Forum: Beginner Basics
Topic: One bridge for VLANs or multiple?
Replies: 16
Views: 3931

Re: One bridge for VLANs or multiple?

Thank you, @cyb ! It is of great help. I am now comparing mine and yours to see what I missed.
by brg3466
Tue Mar 24, 2020 8:51 pm
Forum: Useful user articles
Topic: Using RouterOS to VLAN your network
Replies: 184
Views: 135628

Re: Using RouterOS to VLAN your network

@Sindy, @mkx, thank you for your valuable input. I tried different ways to configure the AP. But still cannot get the WiFi working. Everything else works well. Therefore, I want to post the configuration for the trial set up. Have been struggling for a week but no success. :-) Router: RB951G ( ether...
by brg3466
Mon Mar 23, 2020 9:53 pm
Forum: Useful user articles
Topic: Using RouterOS to VLAN your network
Replies: 184
Views: 135628

Re: Using RouterOS to VLAN your network

@anav, according to the wiki: "After CAPs are successfully connected to the CAPsMAN Router, the wlan1 (SSID WiFi_WORK) and a newly created virtual wlan5 (SSID WiFi_GUEST) interfaces get dynamically added as bridge ports." I checked the cAP ac, yes, it is added as shown below. And wlan1 and...
by brg3466
Mon Mar 23, 2020 8:59 pm
Forum: Beginner Basics
Topic: One bridge for VLANs or multiple?
Replies: 16
Views: 3931

Re: One bridge for VLANs or multiple?

@cyb, May I ask if you hook up your cAP ac to the managed switch and have CAPsMAN on the router (RB4011) ? The reason I ask is that I tried to configure the similar setup in the past few days but failed. I have CCR1009+CRS328P+ 7 cAP ac. I want to have 2 SSID for Work and Guest respectively with vla...
by brg3466
Mon Mar 23, 2020 8:38 pm
Forum: Useful user articles
Topic: Using RouterOS to VLAN your network
Replies: 184
Views: 135628

Re: Using RouterOS to VLAN your network

@mkx , thank you for the input. Yes, I set up the cAP ac so it can find the CAPsMAN, such as discovery interface etc. But I didn't set up anything regarding blue, red, green vlan. I added the Vlan99 so I can reach the device. Other than that, all configuration regarding vlan was set up in the CAPsMA...
by brg3466
Mon Mar 23, 2020 2:43 am
Forum: Useful user articles
Topic: Using RouterOS to VLAN your network
Replies: 184
Views: 135628

Re: Using RouterOS to VLAN your network

Hi everyone, I tried to configure my network according to this guideline in the past few days. Everything goes well except for the AccessPoint. I have 7 cAP ac hooked up to the CRS328P and I want to use CAPsMAN on the router to manage all the CAPs. Since the WiFi set up are all configured on the CAP...
by brg3466
Mon Mar 23, 2020 2:12 am
Forum: General
Topic: Multiple SSIDs and VLANs with CAPsMAN
Replies: 2
Views: 2201

Re: Multiple SSIDs and VLANs with CAPsMAN

Hi, did you get what you want ? I am going to install a very similar setup as you. I tried on RB951G (router) + RB951n (as switch) +cAP ac, I configured it according to the wiki. https://wiki.mikrotik.com/wiki/Manual:CAPsMAN_with_VLANs But I from time to time have issues with the network stability a...
by brg3466
Mon Mar 09, 2020 7:14 pm
Forum: Useful user articles
Topic: Using RouterOS to VLAN your network
Replies: 184
Views: 135628

Re: Using RouterOS to VLAN your network

@anav. #1,2,3. Thank you for the explanation ! #4. it is just a copy of configuration of the router.rsc from pcunite. I just changed the name of blue_VLan and green_Vlan to Vlan 10 and Vlan20, all the set up are Exactly same as router.rsc. Also, I didn't put any firewall. BUT I cannot get internet f...
by brg3466
Mon Mar 09, 2020 6:28 am
Forum: Useful user articles
Topic: Using RouterOS to VLAN your network
Replies: 184
Views: 135628

Re: Using RouterOS to VLAN your network

@pcunite, this is very helpful and informative tutorial I've ever seen in this forum regarding the new Vlan setup. (bridge vlan table). I have a couple of questions after reading thru your material. 1. If there are several APs connected to the switch, and using CAPsMAN to manage the APs (with local ...
by brg3466
Thu Mar 05, 2020 3:14 am
Forum: General
Topic: Need help on "CAPsMAN with Vlans"
Replies: 0
Views: 2208

Need help on "CAPsMAN with Vlans"

Hi, I have a MikroTik CCR1009+CRS328 Switch + 5 cAP ac at small office. Just want to separate Guest WiFi from office WiFi. I set up exactly the same according to the Wiki and it works. Guest WiFi is on subnet 192.168.20.0/24, and office WiFi as well as office computer are on the subnet 192.168.10.0/...
by brg3466
Sun Dec 30, 2018 10:43 pm
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 63
Views: 21729

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

@sjoukes Thank you very much for the info ! Really appreciate you dig into it and had some conclusions. Yes, this GKT issue bother me for a long time and Mikrotik actually didn't explain anything about it, neither told us how to solve it. You really did a good job on it and hopefully 6.43.8 solved i...
by brg3466
Wed Dec 05, 2018 6:56 am
Forum: General
Topic: CSS326 keeps losing connection
Replies: 0
Views: 612

CSS326 keeps losing connection

Hi, I have a CCR1009+ CRS328+CSS326 system. both CRS328 and CSS326 connect to the CCR1009 directly. What I found is that every morning, if I plug my laptop to the CSS326, it gets no internet while I have interent if I plug to CRS328. And if you unplug the power and then re-plug it for CSS326, it is ...
by brg3466
Sat Sep 22, 2018 5:33 am
Forum: Announcements
Topic: v6.43.1 [stable] and v6.43.2 [stable] are released!
Replies: 186
Views: 58851

Re: v6.43.1 [stable] and v6.43.2 [stable] is released!

Upgraded to 6.43.2 on CCR1009 (running CAPsMAN), but cannot upgrade the 5 cAPac with 6.42.7 ( running as CAP). Downloaded the OS and put under the /pub in CPAsMAN, then in CAPsMAN> Remote CAP, click upgrade, it doesn't work.
by brg3466
Fri Sep 14, 2018 7:40 pm
Forum: General
Topic: 'local forwarding' Virtual AP isolation from the LAN device on CAPsMAN
Replies: 0
Views: 655

'local forwarding' Virtual AP isolation from the LAN device on CAPsMAN

Hi there, I have a set up of hEX ( main router) + Switch + 5 cAP ac at home. NAS, Printer also connected to switch. CAPsMAN is running on hEX and five cAP ac as CAP with local forwarding mode. Home WiFi and Guest WiFi ( virtural AP) also set up running smoothly. My question: since Virtural APs(gures...
by brg3466
Fri Sep 07, 2018 6:07 am
Forum: General
Topic: CCR1009- PSU2 enetered state FAIL
Replies: 4
Views: 8962

Re: CCR1009- PSU2 enetered state FAIL

thank you for the reply ! So I over-reacted. I don't need to worry about it ?
by brg3466
Thu Sep 06, 2018 10:03 pm
Forum: General
Topic: CCR1009- PSU2 enetered state FAIL
Replies: 4
Views: 8962

CCR1009- PSU2 enetered state FAIL

Hi all,
I have a CCR1009 and I only connect the power to the PSU1, but when I reboot, I found the log shows that " PSU2 entered state FAIL". I didn't connect anything to PSU2, how come it failed ?

Can this message be neglected or I have to fix it ?

Thank you!
by brg3466
Thu Aug 30, 2018 8:04 am
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 63
Views: 21729

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

@opkky can you elaborate a bit ? You change basic rate and support rate to what level ?

I am still suffering from this issue.

Thank you !
by brg3466
Tue Jul 31, 2018 9:40 pm
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 63
Views: 21729

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

anyone who can tell me how to upload photo ? I found a button 'insert image' but cannot upload the photos.

I have some interesting photos shows that both registration table and the log indicate that my iPhone connected to the AP but the iPhone home screen only shows LTE.
by brg3466
Fri Jul 20, 2018 10:23 pm
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 63
Views: 21729

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

Just some update, the support asked me to try to set the CAPsMAN data rates to default. ( because I set the basic rates at 6M).

Anyone who has experienced the group-key time out with the default data rates ?
by brg3466
Tue Jul 17, 2018 11:11 pm
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 63
Views: 21729

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

@Kerbia, I sent the suport.rif file together with the screenshot to support @mikrotik.com , let's see if they can receive it and reply.
by brg3466
Tue Jul 17, 2018 10:16 pm
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 63
Views: 21729

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

I upgraded to 6.42.6 and it ran smoothly until this morning. I found my iPhone was using LTE.... I checked the log and it was again the 'group key time out". "C:\Users\brg34\Pictures\Screenshots\Screenshot (10).png" ( I don't know how to insert the screen shot , didn't find the button...
by brg3466
Mon Jul 09, 2018 10:12 pm
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 63
Views: 21729

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

I do hope that the new firmware can solve this annoying issues. Since months ago, I was trying different configurations to fight this " group key timeout" issue but failed. I will go update the firmware the first thing when I am back home today and see if it happens again. Have to say, it ...
by brg3466
Wed Jun 13, 2018 7:34 pm
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 63
Views: 21729

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

@Kerbia. do you get stable wifi under 6.41.4 ? If so, I probably want to switch back as well. The drop of Wifi due to this 'groupkey timeout" really bothered me. Hope that Mikrotik can do something about it and fix it.
by brg3466
Mon Jun 11, 2018 2:46 am
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 63
Views: 21729

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

I used to have lease time for 5 minutes and later I changed to 1hr, but no improvement on the disconnection issues. I changed to 1 day the other day but the disconnection still happened. My firmware is 6.42.3. My wireless setting is very simple , CCR1009 + 3 cAP ac and the CAPsMAN is on CCR1009. I t...
by brg3466
Sat Jun 02, 2018 8:47 pm
Forum: Wireless Networking
Topic: hap ac^2 - Group Key Exchange timeout / No Reconnect possible
Replies: 63
Views: 21729

Re: hap ac^2 - Group Key Exchange timeout / No Reconnect possible

I have reported the same issue on other thread. But I can add here that I have same issues on cAP ac as well. My firmware is 6.42.3. The WiFi will drop and if you check the log, it was “ group key timeout”. And my iPhone goes to LTE until you notice it. It won’t automatically reconnect to WiFi until...
by brg3466
Sat Jun 02, 2018 8:35 pm
Forum: Wireless Networking
Topic: Group key timeout - Disconnected
Replies: 5
Views: 2048

Re: Group key timeout - Disconnected

@Kerbia, any update from the support team at MikroTik ?
by brg3466
Sun May 27, 2018 8:53 am
Forum: Wireless Networking
Topic: Group key timeout - Disconnected
Replies: 5
Views: 2048

Re: Group key timeout - Disconnected

6.42.2 now, the previous version I had same issue.

Please keep me posted if you get any reply from mikrotik support. Thank you !
by brg3466
Thu May 24, 2018 6:57 pm
Forum: Wireless Networking
Topic: Group key timeout - Disconnected
Replies: 5
Views: 2048

Group key timeout - Disconnected

Hi Everyone, Recently, I bought a couple of cAP ac and deployed CAPsMan on my router. But I often encounter the WiFi drop out on my iPhone and laptop. I checked the log and it shows " group key timeout". Once WiFi dropped out, sometiems, my iphone somehow doesn't automatically re-connect a...
by brg3466
Sat Mar 31, 2018 2:30 am
Forum: Beginner Basics
Topic: "Check for update" Error [SOLVED]
Replies: 7
Views: 10771

Re: "Check for update" Error [SOLVED]

Thank you , mkx !

Before drop everything in the input , I inserted a filter rule to accept established connection in the input chain. It works now !

And thank all for your valuable inputs , have a nice weekend !
by brg3466
Fri Mar 30, 2018 7:43 pm
Forum: Beginner Basics
Topic: "Check for update" Error [SOLVED]
Replies: 7
Views: 10771

Re: "Check for update" Error [SOLVED]

Hi , I checked firewall filter rules, it seems I found where the issue is. The below filter rule block the dns. 5 ;;; drop all not coming from LAN chain=input action=drop in-interface-list=!LAN log=no log-prefix="" If I disable it, check-for-update works normal. Any suggestion to modify th...
by brg3466
Fri Mar 30, 2018 7:07 pm
Forum: Beginner Basics
Topic: "Check for update" Error [SOLVED]
Replies: 7
Views: 10771

Re: "Check for update" Error [SOLVED]

Hi, thank you for the suggestions. I set the allow-romote-requests to "yes" but doesn't work. Any other suggestions ? [brg3466@CCR1009] > ip dns print servers: 8.8.8.8,8.8.4.4 dynamic-servers: 75.75.75.75,75.75.76.76 allow-remote-requests: yes max-udp-packet-size: 4096 query-server-timeout...
by brg3466
Fri Mar 30, 2018 8:58 am
Forum: Beginner Basics
Topic: "Check for update" Error [SOLVED]
Replies: 7
Views: 10771

"Check for update" Error [SOLVED]

Hi, I have a Mikrotik CCR1009, when I want to check for update, it is always error as follows. I have set up DNS, internet works fine. [brg3466@CCR1009] > /system package update check-for-update channel: current current-version: 6.41.3 status: ERROR: could not resolve dns name [brg3466@CCR1009] > ip...
by brg3466
Fri Mar 16, 2018 3:21 am
Forum: RouterBOARD hardware
Topic: CRS326-24G-2S+RM (CRS328-24P-4S+RM) - Routing fast enough for home vDSL requirements?
Replies: 10
Views: 5479

Re: CRS326-24G-2S+RM (CRS328-24P-4S+RM) - Routing fast enough for home vDSL requirements?

My friend recently bought a CRS112-8P-4S, it powers 3 IP cameras and 2 wAP ac. so the topology is modem - CRS - wAP ac. He also has a RB750Gr3. But since the CRS can configure as a router , he took away the RB750. But he felt the speed got slower compared to Modem- RB750- CRS - wap ac. He has a 150M...
by brg3466
Sun Mar 11, 2018 2:02 am
Forum: General
Topic: L2TP/IPSec VPN can access LAN but not Router [SOLVED]
Replies: 12
Views: 8789

Re: L2TP/IPSec VPN can access LAN but not Router [SOLVED]

Hi Sindy,

I tried the other way you suggested just as an experiment, i.e. create a static interface of <l2tp-vpn> and add it to the LAN.

It works as well !!!

Really learn a lot from you ! Thank you for sharing your knowledge on this topic !
by brg3466
Sat Mar 10, 2018 10:41 pm
Forum: General
Topic: L2TP/IPSec VPN can access LAN but not Router [SOLVED]
Replies: 12
Views: 8789

Re: L2TP/IPSec VPN can access LAN but not Router [SOLVED]

Hi Sindy, Thank you for such a detailed explanation for this issue ! Really appreciated your great help ! I modified the rule 7 as per your suggestion and it works !!! Now I can remotely access the whole LAN network including the Router. :-) As to your question regarding on the 'untracked' in rule 1...
by brg3466
Sat Mar 10, 2018 4:06 am
Forum: General
Topic: L2TP/IPSec VPN can access LAN but not Router [SOLVED]
Replies: 12
Views: 8789

Re: L2TP/IPSec VPN can access LAN but not Router [SOLVED]

Hi, I tried but no luck ! The linked topic has much more complicated firewall rules than mine. I just have the default config and activate the L2TP/IPsec VPN server on the main router. - set DHCP server for VPN, enable L2TP,....., etc. I can get VPN from my iPhone without any problem, and I can remo...
by brg3466
Wed Mar 07, 2018 9:24 am
Forum: Wireless Networking
Topic: hAP ac + wAP ac (as Wi-Fi coverage improvement).
Replies: 16
Views: 3382

Re: hAP ac + wAP ac (as Wi-Fi coverage improvement).

Try to set up the wAP ac under Quick set as below to see if it works: 1. Select WISP mode 2. Use the same SSID and password as hAP ac 3. On the right side, select ‘bridge’ instead of ‘router’ 4. Select address acquisition as ‘static’ IP address instead of ‘automatic’ 5. Assign IP address ,eg, 192.16...
by brg3466
Tue Mar 06, 2018 12:54 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 7227

Re: 2nd router no internet access [SOLVED]

Hi Sob, anav, After I updated the ROS to 6.41.2, it works now, don't know why before it doesn't work. Anyway, here below is the set up. Would like to thanks everyone who provide their expertise on this topic, especailly Sob and Anav, really appreciated your patience and guidance. Next issue will be ...
by brg3466
Mon Mar 05, 2018 7:18 pm
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 7227

Re: 2nd router no internet access [SOLVED]

Hi all, I did another test , I replaced the hAP2 ( switch)with a real unmanaged switch (a netgear 8 port swtich) , and then I connected hAP1 to the switch. so it is RB3011 - netgear Switch - hAP1. And I GOT INTERNET on hAP1. This is beyond my understanding, I assume bridge is transparent, so it shou...
by brg3466
Mon Mar 05, 2018 6:38 pm
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 7227

Re: 2nd router no internet access [SOLVED]

@ Sob, thank you so much ! I finally get the internet through !!! I connected the hAP lite (hereafter called hAP1) to RB3011 directly and it get internet, then I connected it back to the Study wallplate socket, no internet. then I recalled I used another hAP ( hereafter called hAP2) behind the wall ...
by brg3466
Mon Mar 05, 2018 8:31 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 7227

Re: 2nd router no internet access [SOLVED]

@ 2frogs
Thank you for the explanation ! I will try it to see if different.
by brg3466
Mon Mar 05, 2018 6:19 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 7227

Re: 2nd router no internet access [SOLVED]

@2frogs
Any reason for doing this ? I thought it is the same , the other end of the cable behind the wall goes to lan port of 3011, I think hap is directly connected to 3011 lan port in this way.
by brg3466
Mon Mar 05, 2018 5:25 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 7227

Re: 2nd router no internet access [SOLVED]

@anav
have you tried with the 2nd router with default settings ? Did you get
Internet ?

The weird thing is if I replace RB3011 with hAP ( default configuration) , I can get internet.
by brg3466
Mon Mar 05, 2018 5:18 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 7227

Re: 2nd router no internet access [SOLVED]

Hi all, NO LUCK ! What I did is to reset the configuration to factory settings, then change the IP address to 192.168.10.1/24 on the bridge and change the default dhcp pool to 192.168.10.10-192.168.10.254 .... Herebelow are the settings, I think I didn't miss anything. # jan/02/1970 00:02:35 by Rout...
by brg3466
Mon Mar 05, 2018 4:47 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 7227

Re: 2nd router no internet access [SOLVED]

Hi all,
Really appreciated your great help !

I will reset the hAP lite to default configuration and do it over again. i.e change the IP pool , LAN address and the DNS accordingly. See if it will work.
Will let you know in half an hour.

Thanks again !
by brg3466
Mon Mar 05, 2018 3:20 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 7227

Re: 2nd router no internet access [SOLVED]

@CZFan: There's DHCP client on WAN and default masquerade. You can argue that it's not the best config, but it should work. @brg3466: Try also: - "tracert 8.8.8.8" from laptop - "/tool traceroute 8.8.8.8" from router - "/ip dhcp-client print", "/ip address print&q...
by brg3466
Mon Mar 05, 2018 12:58 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 7227

Re: 2nd router no internet access [SOLVED]

@sob
my laptop has 8.8.8.8 as dns server (use ipconfig/all)
and ping 8.8.8.8 will not get through. " request timed out'

@CZfan
Could you elaborate a bit how to do it ?
by brg3466
Sun Mar 04, 2018 11:07 pm
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 7227

Re: 2nd router no internet access [SOLVED]

Hi Anav, thanks for simulating my situation. Do you get internet ? I tried Scenario # 3 again and even below #4 , but no luck. :-( I still cannot get internet. My laptop always shows ' The DNS name does not exist'. /ip dhcp-server network add address=192.168.10.0/24 comment=defconf dns-server=8.8.8....
by brg3466
Sun Mar 04, 2018 10:06 pm
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 7227

Re: 2nd router no internet access [SOLVED]

Many thanks !

I will set to Scenario #3. and reboot the 2nd router and restart my laptop to see what happens !

Will keep you informed of the result !
Cheers !
by brg3466
Sun Mar 04, 2018 9:30 pm
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 7227

Re: 2nd router no internet access [SOLVED]

Hi both, I appreciated your fast response and help ! I am a bit confused. This goes back to the scenario 1. If you look back the first config rsc file I posted, it is what you suggested now. Scenario #1 /ip dhcp-server network add address=192.168.10.0/24 comment=defconf gateway=192.168.10.1 /ip dns ...
by brg3466
Sun Mar 04, 2018 9:48 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 7227

Re: 2nd router no internet access [SOLVED]

/ip address add address=192.168.10.1/24 comment=defconf interface=ether2 network=192.168.10.0 This should be on bridge, but it's not the problem. /ip dhcp-server network add address=192.168.10.0/24 comment=defconf gateway=192.168.10.1 This needs dns-server=192.168.10.1 to give DNS resolver to clien...
by brg3466
Sun Mar 04, 2018 2:56 am
Forum: General
Topic: L2TP/IPSec VPN can access LAN but not Router [SOLVED]
Replies: 12
Views: 8789

Re: L2TP/IPSec VPN can access LAN but not Router [SOLVED]

Have a look at this topic . If you don't find the answer there, come back. Have a look at this topic . If you don't find the answer there, come back. Hi Sindy, Thank you for the help. Looks like the linked topic has the same issue as me. I will look throough carefully and see if I can solve it with...
by brg3466
Sun Mar 04, 2018 1:54 am
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 7227

Re: 2nd router no internet access [SOLVED]

Thank you so much for the help ! I double checked the settings: check that you have wan port. - Ethernet cable from wallplate to WAN port of hAP lite. check that you have a default GW and ip to wan port. - It is default setting, so there is DHCP client on WAN port, and I can see that hAP lite got a ...
by brg3466
Fri Mar 02, 2018 10:55 pm
Forum: Beginner Basics
Topic: 2nd router no internet access [SOLVED]
Replies: 41
Views: 7227

2nd router no internet access [SOLVED]

Hi all, My house has a main router RB3011 and wired from LAN Port to different rooms. So every room has internet access. The network is 192.168.88.0/24. Now at my Study, I want to have a different network 192.168.10.0/24. I plug the ethernet cable from wallplate to hAP lite WAN port, setting the mod...
by brg3466
Fri Mar 02, 2018 6:53 pm
Forum: Beginner Basics
Topic: L2TP/IPsec VPN
Replies: 9
Views: 2138

Re: L2TP/IPsec VPN

do you have anything connected to your router, say , a NAS. If you key in the IP address of your NAS after the VPN is established, do you see the NAS log in screen ?
by brg3466
Fri Mar 02, 2018 6:33 pm
Forum: General
Topic: L2TP/IPSec VPN can access LAN but not Router [SOLVED]
Replies: 12
Views: 8789

L2TP/IPSec VPN can access LAN but not Router [SOLVED]

Hello everyone, I am a newbie on Mikrotik. In my house, I have a RB750G ( 192.168.88.1) as the router and have 2 hAP lite as wireless AP ( 192.168.88.2, 192.168.888.3) + one NAS (192.168.88.4) connected to the LAN port of RB750G. I set up the L2TP/IPsec VPN in order to remotely access my home networ...
by brg3466
Sun Dec 17, 2017 10:08 am
Forum: Announcements
Topic: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!
Replies: 109
Views: 38835

Re: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!

Good to see some new products !

Would like to know if any of below are in the pipeline :
- CAP AC
- MU- MIMO AP


Thank you !
by brg3466
Tue Jun 06, 2017 3:21 am
Forum: General
Topic: iPhone cannot connect to L2TP VPN server
Replies: 2
Views: 1281

Re: iPhone cannot connect to L2TP VPN server

thank you ,hgonzale ! I think I used the L2TP/IPsec in the router. What puzzled me is that I can connect laptop to the L2TP server, only iPhone cannot connect to the server. I don't know what mistake I made in the setup of the server in the router, or I just made some mistakes in the setup on the iP...
by brg3466
Mon Jun 05, 2017 4:56 am
Forum: General
Topic: iPhone cannot connect to L2TP VPN server
Replies: 2
Views: 1281

iPhone cannot connect to L2TP VPN server

Hi everyone, I have a Mikrotik 3011 and set up the L2TP server on 3011 recently. My laptop (windows 10) can successfully connect to the L2TP server but my iPhone cannot. On the iPhone, there is only 3 types of VPN you can choose, IKEv2, IPsec, L2TP, so I pick the L2TP. But it always shows " The...
by brg3466
Fri Dec 02, 2016 6:33 am
Forum: Beginner Basics
Topic: Router cannot get IP Address
Replies: 3
Views: 2557

Router cannot get IP Address

Hi everyone, I recently installied a linksys MODEM DPC3008 for Comcast cable internet. I can get internet if I have my laptop directly wired to modem. But if I add a router (RB750Gr2) connected to the modem , there is no internet. I logged on to the 750, and found the router didn't get WAN IP addres...
by brg3466
Tue Sep 08, 2015 9:43 am
Forum: Beginner Basics
Topic: Setup second router as access point
Replies: 11
Views: 12318

Re:

Have you checked what I wrote before??
I checked and set the DNS same as the first layer router, but it still doesn't work. Any suggestion ?
by brg3466
Thu Aug 06, 2015 5:08 am
Forum: Beginner Basics
Topic: Setup second router as access point
Replies: 11
Views: 12318

Re: Setup second router as access point

Hi, I usually only update the first router and didn't care too much for the second layer ones. Since you mentioned, I tried. You are right ! I have the same issue. The second layer routers cannot update the firmware.
by brg3466
Tue Aug 04, 2015 9:27 am
Forum: Beginner Basics
Topic: Setup second router as access point
Replies: 11
Views: 12318

Re: Setup second router as access point

Hi, I don't quite understand "cannot look for update on the Internet" but I have more or less the same set up for your info. I have the first router , and then 3 hAP , as the second layer router , connected to the first one by cable. What I do is to turn off DHCP on the second layer router...
by brg3466
Sun Aug 02, 2015 6:25 am
Forum: Beginner Basics
Topic: Guest WiFi, but it does not have internet access
Replies: 8
Views: 4189

Re: Guest WiFi, but it does not have internet access

Hi Normis, I have tried your way and it worked when I wanted to set the guest wifi. But recently, I used 2 hAP lite as the access point only and connected them to my Comcast gateway ( modem/router combo), in the quick set , I also tried to set guest wifi . But there is no internet, you can only see ...
by brg3466
Sat Aug 01, 2015 7:54 am
Forum: Wireless Networking
Topic: how to set guest wifi if the hAP lite is used only as an access point ?
Replies: 0
Views: 1239

how to set guest wifi if the hAP lite is used only as an access point ?

Hi everyone, I have a problem with the set up of guest wifi : - I have 3 RB941-2nD (hAP lite 2.4G) connected to my Comcast gateway (modem/router combo , IP address 10.0.0.1) and put in different rooms in my house - I changed the IP address of hAPs to 10.0.0.2, 10.0.0.3, 10.0.0.4 respectively and tur...