I upgraded my Test hAP from 6.39.5 to 6.41 and it just works fine! Now i will test the new VLAN aware bridge :D To all who already upgraded devices in production right before christmas and complain now: This is so stupid! It's not new that these new versions have issues with existing configurations ...

Thanks for your response. I just figured out that i made a copy and paste error on the certificate creation: I used: add common-name=569504bXXXXX.sn.mynetname.net subject-alt-name=[b]IP[/b]:569504bXXXXX.sn.mynetname.net key-usage=tls-server name=server1 Instead of this: add common-name=569504bXXXXX....

Hello everyone, i'm trying do get a connection between a Nexus5X with Strongswan and an RB2011 with 6.39.3 over IKEv2 and certificates. But i'm unable to get a connection. It seems that PH2 is failing. Router Log: Unbenannt.PNG Strongswan Log: Oct 20 16:12:33 00[DMN] Starting IKE charon daemon (stro...

I'm so excited about the coming CRS326-24G-2S+! Would you mind to share us some specs? I hope for a stronger CPU and an all POE version. Also the CSS326 looks great! Maybe some of these features could be included in the next SwOS releases: LACP QoS MSTP DHCP-Snooping SNMPv3 LLDP LLDP-MED POE (802.3a...

*) wireless - fixed rare wireless ac interface lockup;

Please tell me that this is the problem on the "hap AC" when the wireless interface is running but not visible or flapping?

Like mentioned before the CRS switches are L2 Switches with terrible L3 performance. The CCR series are great routers but no switches! Cheapest useable L3 switches in germany are Cisco SG300 or a used catalyst from ebay. Otherwise you could use a CRS226 in combination with a CCR and route all traffi...

Also use latest Bugfix Version 6.36.4

Thanks for the clarification normis

After starting the logging and activating 5GHz again with frequency "auto" it choosed 5500MHz and startet to act strange like before. The wireless Debug log wasn't very helpful Dec/19/2016 19:01:02 wireless,debug wlan2: 78:F8:82:D0:7E:50 attempts to associate Dec/19/2016 19:01:02 wireless,...

mrz can you tell us what cpu is inside? Is there wirespeed L3 performance over a ASIC or like before?

Did you check the wireless debug logs? Not yet but i will start a debug log today in the evening. I had the same problem since it was introduced DFS automatic mode. I returned to version 6.36.4 and everything seems ok. Thanks for this information. I start the debug log today and then try to downgra...

Take the new hEX or RB3011 of you need a 19" Version.

The CCR1009 and CCR1036 have build-in fans. If you remove the top cover you make the cooling much worse!

I really like the new products but can i replace a power supply on the CCR1009-7G-1C-1S+? Why are the power supplies without fans? This is the reason most power supplies die in CCR series... In regards to CRS317, is LACP support going to be implemented on hardware level? This is really interesting! ...

Hello everyone, i used Mikrotik devices over the last couple years and they have been very stable for me. My last configuration was my RB2011 as gateway and capsman in combination with a hAP Accesspoint. This configuration was stable but my neighbors seems to get a new wlan ap or printer every day s...

Hi,

why don't you use FreeRadius (like everybody else)?

Ok thank you very much for your fast response!
I was going crazy about what i'm doing wrong.

But normaly when i add an ip address to the bridge router1 should be able to communicate with router2 and router3 over the bridge?

Val

Hello everyone, actually i'm testing CHS in GNS3 to learn the commands of RouterOS. I configured ips, bonds, vlans and everything worked as expected but i'm not able to configure a bridge interface and let traffic pass throught. What am i doing wrong? Also it is possible to set an ip address on a br...