I came here just to say how awesome this is!

I am using an RB3011 with a sierra MC7700 and it works great. I use this mainly as a backup for VOIP phones. However, I have experienced one issue which is particularly annoying. Despite the fact that I have the "add default route" option disabled on the LTE, it will randomly (not sure wha...

I am doing some work on a small fixed wireless network, and they have 2 connections, neither of which are fiber. They are attempting to push most of the streaming traffic out one provider while allowing everything else to go through the other. I implemented routing marks based off of an example in t...

I recently fired up an RB2011 using a Sierra MC770 and a known working USB adapter. On ATT's network, instead of getting a 4G LTE connection, the interface shows up as "ppp-out-1", despite the fact that I have 4G coverage when using the same device via the PC. Any ideas why this would be o...

Hi, This post of mine seems related to this issue: http://forum.mikrotik.com/viewtopic.php?f=1&t=109616 I'll be tracking both threads to see if we can get any info on this. Probably. The post that I linked also seems to have this issue. I will also note.... these things do NOT come out of the b...

I am attempting to configure 3 CRS125-24G's as switches for an apartment building. I created a template config file by exporting from one, and then painstakingly reviewing each section of code + adding in a section to change the interface names first, so that all other subsequent commands would work...

I configured 2 RB3011s over the past 2 days for completely different purposes. One of them I was using for receiving a static route, the other I was using as a NAT router with DUAL WAN for a bunch of Wi-Fi access points, and some wired clients. In both, I had a need to create bridges in order to cre...

That is pretty weird - it's like saying the water in the sink won't work unless you turn on the light in the garage or something.... The IP configured on the interface itself is actually a /22 right? Believe me... I know! I am very confused myself. Yep. I created the /22 address on the bridge inter...

Are you using the wizard, or configuring it manually? I was configuring it via the wizard. After enabling the option that said "enable IP firewall for bridge" it allowed me to add the pool, but the even weirder part is that apparently enabling that setting murders the speed, so I turned i...

I am using an RB3011 and attempting to create two /22 NAT Subnets. I am able to add the addresses with their /22 subnet mask, but when I attempt to create anything larger than a /24 when setting up the DHCP server, it highlights the box red and will not allow me to continue until I change it to a /2...