Community discussions

Search found 5 matches

by TXBrew
Tue Sep 08, 2015 10:54 pm
Forum: Beginner Basics
Topic: EOIP over IPSEC TWO RB750
Replies: 21
Views: 12753

Re: EOIP over IPSEC TWO RB750

First I create an eoip between the 2...no problems..everything works like it should, then I start making ipsec : /ip ipsec policy add src-address=192.168.123.0/24 src-port=any dst-address=192.168.123.0/24 dst-port=any \ sa-src-address=111.222.333.444 sa-dst-address=555.666.777.888 \ tunnel=no actio...
by TXBrew
Thu Sep 03, 2015 7:18 pm
Forum: General
Topic: CRS Performance Problems???
Replies: 6
Views: 1549

Re: CRS Performance Problems???

Ok... All is working now!!! :D

The port switching works GREAT!!! Huge difference!!! Running very clean!!!

I've attached the config of one of our CRSs for reference!

Thanks again for the help!!!
by TXBrew
Thu Sep 03, 2015 7:05 am
Forum: General
Topic: CRS Performance Problems???
Replies: 6
Views: 1549

Re: CRS Performance Problems???

Ok... Changing the config to port switching made a huge improvement! I didn't do too much testing before calling it a day, but the initial results look much better. Tomorrow I'll look at tweaking it a little... (MTU settings, queue settings, etc..) Thanks for the help on that! Now I have a problem e...
by TXBrew
Wed Sep 02, 2015 6:48 pm
Forum: General
Topic: CRS Performance Problems???
Replies: 6
Views: 1549

Re: CRS Performance Problems???

You're having performance issues because you're configuration is sending every packet through the CPU on the CRS. You should not be using Bridging to accomplish this; rather, you should be using the switch-chip to accomplish this, else you'll never get wire speeds. Take a look at the CRS switch inf...
by TXBrew
Tue Sep 01, 2015 7:28 pm
Forum: General
Topic: CRS Performance Problems???
Replies: 6
Views: 1549

CRS Performance Problems???

Hello, We recently replaced some older Netgear and Cisco switches in our office with two CRS226-24G-2S+ Routerboard switches. The switches are linked together via 1Gbps fiber via the SFP1 ports on both units. The fiber link has been provisioned to trunk 4 Vlans between the two switches by bridging u...