Community discussions

MikroTik App

Search found 28 matches

by the_time
Wed Oct 19, 2005 12:57 pm
Forum: Wireless Networking
Topic: limit bandwidth per IP address
Replies: 14
Views: 40437

You can do tha in the simple queue you have target adres and you can limit each address.
queue simple add target-addresses=1.2.3.4/32 limit-at=200000 
max-limit=200000
by the_time
Fri Sep 30, 2005 11:24 am
Forum: General
Topic: how block by IP or MAC addrres?
Replies: 12
Views: 3168

For example if you want to block class 10.97.20.x and allow only som of the to have access you can do that like this ip firewall rule forward add src-address=10.97.20.98/32 action=acept ip firewall rule forward add action=drop the last rule will drop everything and if you want to allow clients to ha...
by the_time
Mon Sep 19, 2005 12:56 am
Forum: General
Topic: [Help] How to build a Hotspot in RouterOS 2.9.1 ?
Replies: 4
Views: 1362

In 2.9 when setting up the hotspot the www port is not changed to 8081 it stays 80 so you can login with default winbox port.
by the_time
Sun Aug 28, 2005 2:44 pm
Forum: General
Topic: 2.9
Replies: 18
Views: 3889

I have upgraded about 6 routers from 2.8.26 to 2.9 two of them were rb230 upgrade procedure was sucesfull but one of the which has two 5213 cards in it after a period of time lock so that one I have to downgrade another one work perfect and other routers which was running as hotspot gateway I upgrad...
by the_time
Wed Aug 03, 2005 2:15 pm
Forum: General
Topic: Universal Client on different class subnet
Replies: 2
Views: 803

Pleas be more specified you can't reach the hotspot page or you get an error when you try to acceess the hotspot .

Best regards the_time
by the_time
Fri Jul 15, 2005 6:38 pm
Forum: General
Topic: login.html edit prevents user login
Replies: 7
Views: 1727

I have sucessfully edit login page for five times or more the procedure is this: 1. download from the router ftp the entire hotspot folder 2. After geting the hotspot folder open for edit login.html I have edited with Macromedia Dreamweaver mx 2004 and have changed nothing from the code just using t...
by the_time
Thu Jun 02, 2005 7:46 pm
Forum: General
Topic: stable access point client (ethernet brige)
Replies: 6
Views: 1552

The chipset I have mentioned can be found on http://www.mikrotik.com or contact sales@mikrotik.com and if you plan to conect on 30 km then you should use 16dbi sectors and 30dbi parabolic antenna .
by the_time
Thu Jun 02, 2005 3:18 pm
Forum: General
Topic: stable access point client (ethernet brige)
Replies: 6
Views: 1552

For stable access point and high data rates I would sugest you to use atheros ar 5212 and sectorized (for exaple 14dbi or 16 dbi) base station with nstreme and poling and on the client side ar5212 or 5211 chipset and if you have long links you should use 30 dbi parabloci antennas and on shorter dist...
by the_time
Mon May 23, 2005 4:17 pm
Forum: General
Topic: conecting 5211 and 5213
Replies: 3
Views: 1322

I have the same problem conecting 5212 and 5211 on 2.5 Mbps have huge pings .
Very greatfull in a solution .
by the_time
Sun Apr 03, 2005 10:40 pm
Forum: General
Topic: 30 km 5 Ghz coverage
Replies: 3
Views: 1180

Exactly I have premision to do this but what I asked is what equimpent should I use for e.x two 16 dbi sectors on base and on client side 30 dbi parabolic anntena or some thing else my question was 30 km away form the access point to connect a client . I think that was an misunderstand .

Thanks.
by the_time
Sat Apr 02, 2005 11:14 am
Forum: General
Topic: 30 km 5 Ghz coverage
Replies: 3
Views: 1180

30 km 5 Ghz coverage

Hello,
We are trying to build a base station which will work on 5 ghz we need an 180 degrees on about 30 km coverage what equimpent should I use .

Thanks on advice
by the_time
Fri Mar 25, 2005 1:45 pm
Forum: General
Topic: Another Hotspot question from me.
Replies: 1
Views: 677

We are using hotspot in over 15 base and about 1500 clients the only think I would suget to use good hardware and don't use flash disk that they are lover 128 MB.

the_time
by the_time
Mon Feb 07, 2005 2:12 pm
Forum: General
Topic: Connection problem
Replies: 7
Views: 1603

So I should send a suppout file to mikrotik support .
by the_time
Sat Feb 05, 2005 12:08 pm
Forum: General
Topic: Packet Loss to Ethernet Interface
Replies: 4
Views: 1915

We haf the same problem just disable auto-negation and everything work perfect.
by the_time
Sat Feb 05, 2005 12:40 am
Forum: General
Topic: Connection problem
Replies: 7
Views: 1603

Connection problem

We have an 5ghz access point running on router board with atheros 5211 chipset and 10 dbi omni directional anntena with mikrotik v 2.8.21 on client side we have 100 mw atheros card and 23 dbi flat anntena and we can't connect on about 2 km in the same position was working an 50mw ciso aironet card w...
by the_time
Tue Dec 21, 2004 9:19 pm
Forum: General
Topic: show-off
Replies: 21
Views: 4882

We have an 2.4ghz ap in 800 mhz motherboard wiht 2.8.4 installed and I we have to much trouble .
At 1 mbps everything goes down we have 9 clients conected on it.
Thanks on advice
by the_time
Fri Dec 10, 2004 9:48 am
Forum: General
Topic: Can MikroTik RouterOS V2.8 do this
Replies: 4
Views: 1288

The hotspot is teh best solution for this we alredy doing this and you can limit in the profile .
Thanks , the_time
by the_time
Mon Dec 06, 2004 12:30 pm
Forum: General
Topic: Using hotspot feature for general ISP authentication
Replies: 2
Views: 1112

We are using the hotspotfor this purpose and we have about 70 clients conected and it works ok but I sugest you to use mikrotik as ap.
thanks
by the_time
Sun Dec 05, 2004 12:38 am
Forum: General
Topic: Firewall after a bridge
Replies: 7
Views: 1849

the device that act as a ap is not mikrotik and even when we detect and block the client until they clean the computer we practicing this stragtegy for months but again having trouble.
Again thanks.
by the_time
Sat Dec 04, 2004 10:49 pm
Forum: General
Topic: Firewall after a bridge
Replies: 7
Views: 1849

I'll tyr to explain my confguration I've got a Mikrotik which is conceted with cisco aironet on mikrotik ap thats not importnt then this router is a hotspot gateway after it is a ap bridge which is conected through ethernet at last times we are having too many problems with atacks(ddos) and viruses,...
by the_time
Thu Dec 02, 2004 6:49 pm
Forum: General
Topic: Firewall after a bridge
Replies: 7
Views: 1849

Firewall after a bridge

Hi evrybody I have a question I have an Mikrotik router and after it has a wireless bridge the reason I am asking is the clients that I have conected probably some of them has viruses that works on port 445 I have blocked this port using firewall rule forward but stil I can see activity betwen clien...
by the_time
Tue Oct 12, 2004 11:18 am
Forum: General
Topic: Any plan to support wireless card with realtek chipset
Replies: 2
Views: 1161

I was hoping that in 2.9 you will support this cards anyway thanks
by the_time
Mon Oct 11, 2004 11:35 pm
Forum: General
Topic: Virus problems
Replies: 1
Views: 1087

Virus problems

One of my client has a virus on computer, that router when its conected has hospot and its not loged in but when look on torch the trafic is about 1Mbps that router its limited on 512000 but I really don't know what its going on.
Thanks the_time :x
by the_time
Mon Oct 11, 2004 11:17 pm
Forum: General
Topic: Any plan to support wireless card with realtek chipset
Replies: 2
Views: 1161

Any plan to support wireless card with realtek chipset

Does mikrotim has any plan to support te wireless cards with realtek chipset.
Thanks in answear
by the_time
Sat Oct 02, 2004 10:54 am
Forum: General
Topic: Need to install graphics for Mikrotik Router
Replies: 3
Views: 1297

Need to install graphics for Mikrotik Router

I have tried to make some graphicons for bandwith usage, I do something with mrtg but it fails does anybody know something for that.
Best regards the_time
by the_time
Thu Sep 30, 2004 10:00 pm
Forum: General
Topic: Firewall rule help!!!
Replies: 1
Views: 983

Firewall rule help!!!

Hello,
I have add a rule that block tcp port 25 so it works fine but I want to relase an ip.
My network configuration are 10.10.10.0 I want to that 10.10.10.5 to get acces to this port.
Thanks
by the_time
Mon Sep 27, 2004 8:03 pm
Forum: General
Topic: Preventing an ddos atack on mikrotik router
Replies: 3
Views: 2223

so i've creat a new chain with name "SynFlood" then i create this 0 src-address=0.0.0.0/0:0-65535 in-interface=all dst-address=0.0.0.0/0:0-65535 out-interface=all protocol=tcp icmp-options=any:any tcp-options=syn-only connection-state=any flow="" connection="" content="" src-mac-address=00:00:00:00:...
by the_time
Sun Sep 26, 2004 5:26 pm
Forum: General
Topic: Preventing an ddos atack on mikrotik router
Replies: 3
Views: 2223

Preventing an ddos atack on mikrotik router

Hello,
I need some help before some days I have an atack on mikrotik router and evrything goes down now it sems to be an ddos atack does anybody know any way to defend or prevent these kind of atacks.
Thanks