MikroTik

mavink

I had a very annoying issue when upgrading an RB3011 today. This was probably because I've tried repartitioning it in previous RouterOS versions (unsuccesfully of course, since this is only officially supported since 6.39.1). I upgraded from RouterOS 6.38.5 to 6.39.1. This caused it to get stuck in ...

mavink

From your description it sounds like the VRRP broadcasts don't make it to the other routers. Might there be a firewall for inbound traffic on these firewalls that blocks this?

mavink

For those that are interested: here is a working configuration for an IKEv2 tunnel to Azure. This config works both as initiator and responder. a.a.a.a = Public IP of your Azure VPN gateway b.b.b.b = Public IP of the Mikrotik c.c.c.c/cc = Private IP range on the Azure side d.d.d.d/dd = Private IP ra...

mavink

We just installed a couple of wAP AC's powered by a RB260GSP last week, and those all show their Ethernet ports running at 1 Gbps. This is with the latest RouterOS (6.36.2).

mavink

I think the biggest thing is that it's not using local forwarding, which means that the CPU is tunneling the traffic back to the CAPSMAN. You think that without CAPSMAN would achieve a better result? mavink : Can you test it without CAPSMAN and with disabled connection tracking? I might have some t...

mavink

Was it in fastpath mode?

AFAIK it is; the "allow fastpath" setting is on and there are no firewall rules (this is an internal AP used for testing, and all traffic is handled by the CAPsMAN router). The complete config is available here:
http://pastebin.com/5twkpNvw

mavink

What channel width was used?
Have you any screenshots? Please share it with us.

That's 80 MHz, the Macbook connected as "877.5Mbps-80MHz/3S". But the limiting factor appears to be the CPU in the hAP AC, not a lack of wireless bandwidth. What would you like to see screenshots of?

mavink

For those that are interested in using the hAP AC with CAPsMAN: throughput stats using that setup, with no local forwarding (i.e. routing/firewalling handled on the router hosting CAPsMAN). All tests done between a Linux machine connected through gigabit ethernet directly in the router running CAPsM...

mavink

Its not vexpensive at all for price you get.. - One Core 750 Mhz Processor - 128MB ram -16MB Flash Compared to Xiaomi Wifi Mini router that cost only $30 is ridiculous. https://wiki.openwrt.org/toh/xiaomi/mini If you're going to compare the Xiaomi with a Mikrotik access point the hAP AC Lite would ...

mavink

They have 3 types of chip sets. Two of them can operate in CPE or CO mode. I don't think the SFP can do CO mode. Not a deal killer but would be nice if it would do CO mode. I could use a 24 port SFP cage switch and mix and match modules, VDSL2, Fiber and Ethernet. I would use the RB's with SFP port...

mavink

RB3011 will not have hw encryption support enabled in ROSv6.
HW encryption works only with Ipsec.

That's good to know. Is hardware encryption for IPSec already enabled form the RB3011, or are you still working on that?

mavink

How much throughput can be expected on an RB3011 for simple queues? I just had a hardware failure and I'm looking for a good value replacement that can handle a few hundred Mbps... I have a hEX in place right now which is ~90% CPU all the time, I have a couple RB850Gx2 units in UPS and I'll swap on...

mavink

Please add a feature allowing display of a custom .bmp 24/7/365 with for example a company logo and contact number.

That feature is already available through branding packages.

mavink

Am I reading it correctly? 16MB storage ONLY? So... no partitions and a problematic upgrade process? Is this possible? This is the same as the HAP Lite; the upgrade file is loaded in RAM. I've never had a problem upgrading those, but it would have been nice to have enough storage for two partitions.

mavink

The new 6.35 release still hasn't addressed the lack of repartitioning functionality on the RB3011; switch menu is visible in Webfig but not in Winbox, and the master port field is still missing for Ethernet interfaces when using Winbox.

mavink

Hello, LCD and Switch menu missing... Anyone else have that problem? Thank you! p.s. oh, I just saw *) winbox - added LCD menu for RB3011; will be added Switch menu too? :) RouterOS 6.33.5 does show the switch menu in Webfig, but I don't see it in the CLI or Winbox. The LCD menu is available in all...

mavink

Little out of VPN topis but does anyone expriened some strange behaviour in RB3011? And ... on RB3011 we had ... 5-10% packet losses. Nothing changes, than device. Any ideas? OH yes, one more info: RouterOS 6.33.3 on both RB750GL and RB3011 I've been running one with the same RouterOS version for a...

mavink

Hi there, Looking for a recommendation for hardware for running a small cafe/co-working space in Malaysia. The internet it connects to maxes out at 50Mbps down and 10Mbps up. The capacity of the place is about 50 people. That's mostly standing. Thank you ! A bit more information about the expected ...

mavink

Currently I have a many routers with few dozen firewall rules. Most of them can be easily grouped to 2-3 groups like "VPN" or "MOBILE". Similar issue is also bugging me in few home setups where I assigned static leases for every device. It will be handy to group devices by user ...

mavink

Please add functionality to enter Connection or Packet Mark in L2TP Client Profiles, because currently there is no way to Mangle different L2TP Client connections ('Dial Out Routing'). Thanks, regards Marcus Have you tried assigning a different address pool to each client profile, and doing the man...

mavink

Please add functionality to enter Connection or Packet Mark in L2TP Client Profiles, because currently there is no way to Mangle different L2TP Client connections ('Dial Out Routing'). Thanks, regards Marcus Have you tried assigning a different address pool to each client profile, and doing the man...

mavink

AC Wireless with 1/100 mbps LAN ports.. LOL :lol: As cdr.pl say. Maybe hAP ac lite will be sold this year http://www.cdr.pl/download/hAP_ac_lite.pdf Why routerboard always provide 10/100Mbps Ethernet ports? too outdated. And what's specifications for hAP AC ?? The "non-lite" HAP ac will h...

mavink

Let me get this clear, so on configuration with 1x antenna, 802.11ac on 5GHz is no better than 802.11n? No, 802.11ac will be a lot better, even with a single antenna. With 40 MHz of bandwidth you can get a theoretical data rate of 200 Mbps, versus 150 Mbps for 802.11n; but 802.11ac can also use 80 ...

mavink

This would be a great feature. Configure a couple of hostnames you want certificates for, and then have the firewall automatically request/renew them with letsencrypt.org. This will save a lot of time, especially when using services that require a valid certificate such as SSTP VPN's.

mavink

i like very much mikrotik devices, with rb951Ui i have very successful implementations but the problem is people very often requesting 802.11AC or at least dualband. im not very happy of installing 100+ dualband ap of other vendors across 2015 when all i want to install is mikrotik Combining a RB92...

mavink

Since the Dude typically already has access to all RouterOS devices on a network, a logical addition would be a method to automate configuration backups. Some ideas: Periodically do the API equivalent of /export compact on all devices, and store the output on the Dude server Allow administrator to s...

mavink

Virtio drivers for Xen environments. Especially the disk drivers, many cloud hosters use Xen but don't support IDE emulation.

mavink

We found a small bug in the latest (6.32.2) release. In webfig, when trying to copy a client to the access list (from the registrations tab in CAPsMAN v2) we get an internal server error and are redirected to the login screen. Doing the same thing with winbox works fine.

mavink

I don't think they really know Mikrotik RouterOS. If they did they wouldn't say that there will be a significant processing overhead because of IDE.
Once Mikrotik boots it pretty much writes almost nothing to the disk. So there is no disk IO to cause any load

That was my exact response

mavink

Very nice! Problems I've met are unsupported virtio (disk and network both) and cloud-init to be possible to load on AWS, Openstack, etc.. :) network is supported, disk is coming later Can you add both virtio disk and network support to the x86 installer ISO as well? That would be a great addition!...

mavink

Very nice! Problems I've met are unsupported virtio (disk and network both) and cloud-init to be possible to load on AWS, Openstack, etc.. :) network is supported, disk is coming later Can you add both virtio disk and network support to the x86 installer ISO as well? That would be a great addition!

mavink

Dear, Can the Cloud Hosted Router itself be a Virtual Router with KVM? I suppose this will depend in the future on the hosted provider. Thanks, Patrick I'm wondering about the same thing. I'd like to deploy a couple of RouterOS instances on the Vultr cloud (https://www.vultr.com) that uses KVM, but...

Search found 32 matches

Re: v6.39.1 [current]

Re: Is VRRP working in 6.38.5?

Re: Feature Req: IKEv2 server and client

Re: wAP AC PoE Compatibility - No Gigabit

Re: HAP AC

Re:

Re: HAP AC

Re: HAP AC

Re: HAP AC

Re: Mikrotik VDSL / DSL Modem?

Re: HAP AC

Re: RB3011 simple queue performance?

Re: LCD - Displaying a bitmap or some other custom message.

Re: HAP AC

Re: RB3011UiAS-RM

Re: RB3011UiAS-RM

Re: RB3011UiAS-RM

Re: Co-working Cafe

Re: Feature request: Grouping of firewall rules/DHCP leases

Re: Feature Request : L2TP Connection / Packet Mark

Re: Feature Request : L2TP Connection / Packet Mark

Re: HAP AC

Re: HAP AC

Re: Support for ACME/Let's Encrypt certificate management [SOLVED]

Re: HAP AC

Feature request: automating configuration backups

Re: CHR features from tool packages

Re: CAPsMAN v2 ready for testing

Re: Cloud Hosted Router

Re: Cloud Hosted Router

Re: Cloud Hosted Router

Re: Cloud Hosted Router