Community discussions

Search found 106 matches

by Miracle
Thu Oct 10, 2019 4:23 am
Forum: General
Topic: RB4011iGS+ occasionally become inaccessible
Replies: 5
Views: 784

Re: RB4011iGS+ occasionally become inaccessible

Use watchdog it will auto reboot (if it not work try disable interface on otherside).
by Miracle
Mon Oct 07, 2019 10:56 am
Forum: General
Topic: Link failover without co-location noise
Replies: 2
Views: 965

Re: Link failover without co-location noise

You have to use active backup on bonding.
Netwatch must trigger swap poe on off both ports, delay enough time for both side reconnect wireless.
by Miracle
Mon Sep 30, 2019 6:57 am
Forum: RouterBOARD hardware
Topic: RB750Gr3 long cable unstable
Replies: 8
Views: 1043

Re: RB750Gr3 long cable unstable

My mistake... Miracle can you ping your device when there is no access to it? Yes, it reply ping but no data forward or login winbox, web long runs of cable require high quality cable, and good cabling installation practices to operate properly try certifying cabling to discard it as a cause long c...
by Miracle
Sun Sep 29, 2019 7:12 pm
Forum: RouterBOARD hardware
Topic: RB750Gr3 long cable unstable
Replies: 8
Views: 1043

Re: RB750Gr3 long cable unstable

Do you see any link downs in the ethernet ports? If no then the problem is not the cable distance.
It's work well when I test with short cable.
by Miracle
Sun Sep 29, 2019 7:09 pm
Forum: General
Topic: RB4011iGS+ occasionally become inaccessible
Replies: 5
Views: 784

Re: RB4011iGS+ occasionally become inaccessible

They are troubles when use Realtek / MediaTek switch.

Try shorter cable ?
by Miracle
Wed Sep 25, 2019 3:42 am
Forum: RouterBOARD hardware
Topic: CRS125-24G-1S-RM brick
Replies: 9
Views: 662

Re: CRS125-24G-1S-RM brick

Disconnect console before install
by Miracle
Sun Sep 22, 2019 4:57 am
Forum: Beginner Basics
Topic: Noob questions
Replies: 4
Views: 498

Re: Noob questions

You can do almost everythings on winbox
CLI for backup, clone device setup
by Miracle
Sat Sep 21, 2019 7:19 am
Forum: Scripting
Topic: Hello, everyone, my ROS is far away, the power of ROS is cut off by the bad guys. I want to add a script to detect ROS
Replies: 6
Views: 898

Re: Hello, everyone, my ROS is far away, the power of ROS is cut off by the bad guys. I want to add a script to detect R

Some uptime monitor service: uptimerobot.com pingdom.com...
Use them to monitor your ddns address, they can send email, sms, app arlert.
by Miracle
Sat Sep 21, 2019 7:13 am
Forum: Wireless Networking
Topic: hAP AC2+cAP AC Roaming is a joke
Replies: 35
Views: 4144

Re: hAP AC2+cAP AC Roaming is a joke

Works fine, admin is the problem Well, I'm just telling my feeling after comparing to the cheapest TP-Link mesh kit with k/v/r supported system, it makes my hAP AC2 + cAP AC looks like an idiot. Maximum download speed, roaming performance, handling multi clients, stability, all lost. A person here ...
by Miracle
Thu Sep 19, 2019 9:33 am
Forum: RouterBOARD hardware
Topic: RB750Gr3 long cable unstable
Replies: 8
Views: 1043

RB750Gr3 long cable unstable

I replace RB750Gr2 by new RB750Gr3,
3 ether ports have long cable (80m-90m) connect to RB750Gr2, CRS125, TPlink SG108E. It's random crash, I can not connect via ip, romon.
Watchdog auto reboot work if I disable uplink when RB750Gr3 unresponse.
Mediatek switch is worse than Qualcomm ?
by Miracle
Tue Sep 17, 2019 1:17 pm
Forum: Wireless Networking
Topic: any suggestions for gaming WIFI network
Replies: 2
Views: 483

Re: any suggestions for gaming WIFI network

Look like cpu throtting when it lack power.
Check cable and power adaptor, POE require good cable (should be pure copper).
by Miracle
Wed Nov 14, 2018 1:59 pm
Forum: RouterBOARD hardware
Topic: Usage GPON module SFP in Spain
Replies: 249
Views: 51779

Re: Usage GPON module SFP in Spain

I get only "Sorry, your request cannot be accepted." (http 403) in my office, in my home and on my phone via mobile operator. Looks like your blacklist is quite big :)
Only 127.0.0.1 in white list
by Miracle
Sun Oct 28, 2018 5:49 am
Forum: General
Topic: CloudFlare DNS over TLS
Replies: 41
Views: 18192

Re: CloudFlare DNS over TLS

I've got DNS over TLS working on my hEX! If you've rooted your device (don't contact MT for support if you do this!) it's quite straightforward to install. Since cloudflared is written in Go, it's easy to cross-compile and the only thing it needs to operate is a ca-certificates.crt bundle which I c...
by Miracle
Thu Oct 25, 2018 5:38 am
Forum: Announcements
Topic: v6.43.4 [stable] is released!
Replies: 78
Views: 22572

Re: v6.43.4 [stable] is released!

Mac Address leaked from VLAN to main interface (CCR1009, Hex r3), I have 2 bridge same mac, it cause packet loop due leaked. What do you mean? As far as I remember, VLAN has always had the same MAC address as its parent Ethernet interface. And, as always, you can freely change MAC address of bridge...
by Miracle
Wed Oct 24, 2018 7:18 am
Forum: Wireless Networking
Topic: Large ping from router to devices, 1ms back
Replies: 2
Views: 437

Re: Large ping from router to devices, 1ms back

Client in state Automatic Power Save Delivery ?
https://routerguide.net/wmm-apsd-on-or-off/

Disable wmm and test agian ?
by Miracle
Wed Oct 24, 2018 7:06 am
Forum: RouterBOARD hardware
Topic: New High End Router Hardware Soon?
Replies: 11
Views: 1824

Re: New High End Router Hardware Soon?

...for the most part very ill suited really to networking functions and tasks... Why so harsh judgement? Tile is great for massive parallel tasks. What is typical paralelized task in networking? Packet forwarding/filtering ... Obviously there are issues due to low market penetration but that has no...
by Miracle
Tue Oct 23, 2018 6:33 pm
Forum: RouterBOARD hardware
Topic: New High End Router Hardware Soon?
Replies: 11
Views: 1824

Re: New High End Router Hardware Soon?

Why don't use x86 ?
Intel Xeon D-2100 or AMD EPYC 3000
by Miracle
Tue Oct 23, 2018 5:02 pm
Forum: Announcements
Topic: v6.43.4 [stable] is released!
Replies: 78
Views: 22572

Re: v6.43.4 [stable] is released!

When I set comment for PPTP client, it reconnect ! New feature ? It has always been like that. Changing comment on any interface brings that interface down and then back up. PS. The next time you post to a release topic please make sure you are reporting a problems that is specific to (was introduc...
by Miracle
Tue Oct 23, 2018 12:17 pm
Forum: Announcements
Topic: v6.43.4 [stable] is released!
Replies: 78
Views: 22572

Re: v6.43.4 [stable] is released!

When I set comment for PPTP client, it reconnect !
New feature ?

Mac Address leaked from VLAN to main interface (CCR1009, Hex r3), I have 2 bridge same mac, it cause packet loop due leaked.
by Miracle
Mon Oct 22, 2018 5:13 am
Forum: RouterBOARD hardware
Topic: RB3011 port flopping - bad design
Replies: 56
Views: 12846

Re: RB3011 port flopping - bad design

My RB3011 port 5,6 flapping every day.
I add 2nd power supply over port POE, port flapping gone.
by Miracle
Fri Oct 12, 2018 4:27 pm
Forum: Forwarding Protocols
Topic: RB4011 vs. CCR1009 BGP
Replies: 46
Views: 8139

Re: RB4011 vs. CCR1009 BGP

Yes, we are aware of this peculiarity and we are working also on new routers that have higher power per core, not just many cores.
Please do some CCR with ARM or x86
by Miracle
Thu Oct 04, 2018 6:44 am
Forum: Beginner Basics
Topic: Need YouTube CIDR/Netmask
Replies: 8
Views: 881

Re: Need YouTube CIDR/Netmask

thank a lot

www.youtube.com in my country is filtered by the government
I can not use the dns trick !!!

Please provide a good solution

Please provide a good solution
Why goverment filtered while you can access youtube.com ?

Google edge cache using ISP's address in some country.
by Miracle
Mon Jul 09, 2018 10:54 am
Forum: General
Topic: Any plans for SD WAN?
Replies: 18
Views: 8059

Re: Any plans for SD WAN?

Mikrotik can config to run multiwan and zero packet loss when switch line.
Hire consultants they will do it for you
by Miracle
Thu Jul 05, 2018 3:40 pm
Forum: General
Topic: How to limit bandwidth to internet, but not limit an IP segment above the NAT?
Replies: 8
Views: 1885

Re: How to limit bandwidth to internet, but not limit an IP segment above the NAT?

Place local queue above internet queue.
Very simple !
by Miracle
Wed Jul 04, 2018 4:12 am
Forum: General
Topic: Mikrotik Support is not reacting at all! - WIFI issues with realtime TCP applications
Replies: 11
Views: 1205

Re: Mikrotik Support is not reacting at all! - WIFI issues with realtime TCP applications

I see diffirent in your config and others is wmm
You should disable it. Will reduce battery life but connect always on
by Miracle
Mon May 28, 2018 6:22 am
Forum: General
Topic: CRS125 do I dare to upgrade from 6.37.4 to 6.41+ ?
Replies: 10
Views: 1022

Re: CRS125 do I dare to upgrade from 6.37.4 to 6.41+ ?

Vlan switch chip not working like their wiki after 6.40
by Miracle
Thu May 10, 2018 6:46 am
Forum: Beginner Basics
Topic: Its possible to make this in a same RB750gr3 ? [SOLVED]
Replies: 12
Views: 1358

Re: Its possible to make this in a same RB750gr3 ? [SOLVED]

Why you can not change ip 192.168.100.1 ?
I sugguest use bridge mode.
by Miracle
Wed Apr 18, 2018 4:48 pm
Forum: General
Topic: Force to redirect after hotspot login
Replies: 3
Views: 645

Re: Force to redirect after hotspot login

Hi there,

how is it possible to force login after a user authenticate on an hot spot?
Almost mobile device force close hotspot login page immediately when hotspot login success, so redirect don't work here
by Miracle
Tue Apr 17, 2018 5:48 am
Forum: General
Topic: Feature requests
Replies: 1159
Views: 207349

Re: Request : alternative DNS Port for IP DNS Setting

I've been waiting for along time MikroTik can provide alternative port for IP DNS Setting, other than 53 (default) normally user input value ip address such as 8.8.8.8 and 8.8.4.4 for IP DNS Setting alternative port, for example, can be set as easy as 8.8.8.8:553 and 8.8.4.4:533 The purpose is to g...
by Miracle
Mon Apr 16, 2018 10:07 am
Forum: Scripting
Topic: how to limitation the youtube speed in mikrotik
Replies: 5
Views: 660

Re: how to limitation the youtube speed in mikrotik

They stream from domain like this r1.sn-npoeenee.googlevideo.com But address-list can not add wildcard subdomain so very hard to filter youtube traffic. thank you very much ...do you mean that there is no aim from limitation the youtube speed ??!!!!!! you say / ican do something with address - list...
by Miracle
Mon Apr 16, 2018 3:47 am
Forum: Scripting
Topic: how to limitation the youtube speed in mikrotik
Replies: 5
Views: 660

Re: how to limitation the youtube speed in mikrotik

They stream from domain like this
r1.sn-npoeenee.googlevideo.com

But address-list can not add wildcard subdomain so very hard to filter youtube traffic.
by Miracle
Sun Mar 11, 2018 5:33 am
Forum: Beginner Basics
Topic: L2TP IPSEC connection problem
Replies: 5
Views: 2456

Re: L2TP IPSEC connection problem

Seem your internet connect is behind an NAT router.
You must have a direct internet connect.
by Miracle
Tue Nov 07, 2017 7:49 am
Forum: Scripting
Topic: Email alert by bad ping latency
Replies: 13
Views: 2532

Re: Email alert by bad ping latency

by Miracle
Wed Oct 25, 2017 12:12 pm
Forum: SwOS
Topic: 16/32/48 ports
Replies: 51
Views: 20144

Re: 16/32/48 ports

I need 8/16 port SWOS
by Miracle
Sun Oct 08, 2017 5:06 am
Forum: Beginner Basics
Topic: sign in WIFI
Replies: 6
Views: 590

Re: sign in WIFI

Increase hotspot - idle timeout
by Miracle
Wed Sep 20, 2017 10:42 am
Forum: Beginner Basics
Topic: User Manager
Replies: 8
Views: 902

Re: User Manager

use layer 7 to block p2p now. After that you create mangle rules to shape that traffic. L7 can read data encrypted ??? I suggest you read more about layer 7 on mikroti wiki @ wiki.mikrotik.com. as for how to setup the rules, I have attached screen shot that will guide u. Your solution won't work wh...
by Miracle
Wed Sep 20, 2017 9:16 am
Forum: Beginner Basics
Topic: User Manager
Replies: 8
Views: 902

Re: User Manager

use layer 7 to block p2p now. After that you create mangle rules to shape that traffic.
L7 can read data encrypted ???
by Miracle
Wed Sep 20, 2017 7:42 am
Forum: General
Topic: Mikrotik routing with NAT
Replies: 2
Views: 553

Re: Mikrotik routing with NAT

Add a filter rule that accept forward tracffic from ip pool to gateway ip
PPOE client must use gateway ip 150.xxx.x.1
by Miracle
Wed Sep 20, 2017 7:39 am
Forum: Beginner Basics
Topic: User Manager
Replies: 8
Views: 902

Re: User Manager

P2P now encrypted, how do you know they download torrent ?
by Miracle
Sun Sep 10, 2017 6:29 pm
Forum: Announcements
Topic: v6.40.3 [current]
Replies: 95
Views: 26198

Re: v6.40.3 [current]

I can not force hotspot user using https after upgrade to 6.40.3.
Both http and https working althought I try disable www service.
by Miracle
Thu Aug 31, 2017 1:04 pm
Forum: General
Topic: Hotspot Queue HTTPS vs HTTP
Replies: 6
Views: 992

Re: Hotspot Queue HTTPs vs HTTP

Uncheck Transparent proxy
Dude, It's work very well. Thanks
How do you explain that?
When it checked all http traffic will going to mikrotik proxy server (consume router's resource) and you can trigger to run advertisment popup.
by Miracle
Thu Aug 31, 2017 12:57 pm
Forum: Wireless Networking
Topic: Event with 1200 wireless users
Replies: 8
Views: 3500

Re: Event with 1200 wireless users

Hi, I need your help and experience to do the following. I need to prepare a event with 1200 concurrent wireless users (smarthphones, tablets). I was thinking to use the mikrotik dual band 2.4 and 5Ghz. Maybe a mix Metal and Groove. The local is as open space building. My question is how many AP´s ...
by Miracle
Wed Aug 30, 2017 5:29 pm
Forum: General
Topic: Hotspot Queue HTTPS vs HTTP
Replies: 6
Views: 992

Re: Hotspot Queue HTTPs vs HTTP

Uncheck Transparent proxy
by Miracle
Fri Aug 25, 2017 4:46 pm
Forum: Virtualization
Topic: CHR suggestions for new functionality
Replies: 157
Views: 32346

Re: CHR suggestions for new functionality

CHR should run containers, docker or whatever.
Thats great
+1
Please clarify how you would use it and why :)
To run other webserver, mysql...

And please make CHR easy to install like other OS
by Miracle
Fri Aug 25, 2017 4:22 pm
Forum: Virtualization
Topic: CHR suggestions for new functionality
Replies: 157
Views: 32346

Re: CHR suggestions for new functionality

CHR should run containers, docker or whatever.
Thats great
+1
by Miracle
Fri Aug 25, 2017 12:43 pm
Forum: Announcements
Topic: v6.40.2 [current]
Replies: 44
Views: 10089

Re: v6.40.2 [current]

I got you. Why not use 6.40 then until 6.40.3 release?
6.40 can not use torch on ppp.
Routeros so much bugs ....
by Miracle
Fri Aug 25, 2017 11:50 am
Forum: Announcements
Topic: v6.40.2 [current]
Replies: 44
Views: 10089

Re: v6.40.2 [current]

Please release 6.40.3 asap. I can't run hotspot server now. what's the problem with hotspot server in 6.38.7, for example? www and www-ssl unresponsive randomly from 6.40.1 but 6.38.7 (actual bugfix version) should not be affected, that's why I ask I concern vlan and bridge error when downgrade. My...
by Miracle
Fri Aug 25, 2017 11:33 am
Forum: Announcements
Topic: v6.40.2 [current]
Replies: 44
Views: 10089

Re: v6.40.2 [current]

Please release 6.40.3 asap.
I can't run hotspot server now.
what's the problem with hotspot server in 6.38.7, for example?
www and www-ssl unresponsive randomly from 6.40.1
by Miracle
Fri Aug 25, 2017 9:38 am
Forum: Announcements
Topic: v6.40.2 [current]
Replies: 44
Views: 10089

Re: v6.40.2 [current]

Yes, WWW crash is fixed in 6.41rc version: https://forum.mikrotik.com/viewtopic.php?f=21&t=123936&start=100#p614770 This fix will be included also in 6.40.3 version. It was made too late when 6.40.2 was already built and being tested for release. Please release 6.40.3 asap. I can't run hotspot serv...
by Miracle
Thu Aug 24, 2017 2:38 pm
Forum: Announcements
Topic: v6.40.2 [current]
Replies: 44
Views: 10089

Re: v6.40.2 [current]

Did you fix www unresponsive ?
by Miracle
Thu Aug 24, 2017 6:11 am
Forum: General
Topic: Looking for RouterOS hosting in Hong Kong
Replies: 1
Views: 414

Re: Looking for RouterOS hosting

Onecloud (oneprovider.com) can install routeros chr.
They have hongkong server (leaseweb.com)
by Miracle
Wed Aug 23, 2017 7:29 pm
Forum: Announcements
Topic: v6.40.1 [current]
Replies: 74
Views: 23051

Re: v6.40.1 [current]

Please fix www unresponse in 6.40.2, I don't want upgrade to 6.41
by Miracle
Fri Aug 11, 2017 8:03 pm
Forum: General
Topic: a virus scanner on the router board
Replies: 14
Views: 5551

Re: a virus scanner on the router board

It is a nice marketing trick to buy their products, other than that mostly it is waste of resources.
Or Mikrotik make some feature monitor and analytics connect to detect unusual traffic (ex hacker thief data) ?
by Miracle
Fri Aug 11, 2017 4:19 am
Forum: RouterBOARD hardware
Topic: FS.com BiDi SFPs?
Replies: 5
Views: 1475

Re: FS.com BiDi SFPs?

Just order, they will contact you to make it compatible with your device before shipping.
by Miracle
Mon Feb 20, 2017 3:54 am
Forum: General
Topic: Upgraded to 6.38.1 and wireless interface is lost
Replies: 4
Views: 1138

Re: Upgraded to 6.38.1 nad wireless interface is lost

I got same problem.
I have to use netinstall to reinstall 2 Basebox2 from 6.37.1 to 6.38.1 and I have 6 Basebox 2 stuck at 6.37.1 in producing now.
by Miracle
Mon Feb 06, 2017 3:32 pm
Forum: General
Topic: RB 3011 asymmetric cpu load
Replies: 10
Views: 1321

Re: RB 3011 asymmetric cpu load

Your problem can be solved easily.
Drink a bottle of rum and see if you still care.
Agree
Loadblancing multicore and new trouble come like out of order packet
by Miracle
Mon Feb 06, 2017 3:30 pm
Forum: General
Topic: Mikrotik Hotspot SSL Error ? What is Error Problem ?
Replies: 13
Views: 3160

Re: Mikrotik Hotspot SSL Error ? What is Error Problem ?

Https Not redirect to login page .
http not problem .

i want https redirect to my login page.
It's true!
You can not change that
by Miracle
Fri Jan 06, 2017 6:01 am
Forum: Announcements
Topic: v6.38 [current] is released!
Replies: 168
Views: 37129

Re: v6.38 [current] is released!

Changes with RSTP is a complete disaster!!! IMHO such changes are not the subject for release branch! RPVST was great approach with high level of flexibility. Now if we just update all our routers in L2 segment it won't work at all (fortunately tested on the table) and I'm talking about network tha...
by Miracle
Tue Nov 29, 2016 7:58 am
Forum: General
Topic: Support for ACME/Let's Encrypt certificate management [SOLVED]
Replies: 93
Views: 35530

Re: Support for ACME/Let's Encrypt certificate management [SOLVED]

Please support let's encrypt
thanks
by Miracle
Sat Nov 26, 2016 5:46 am
Forum: Wireless Networking
Topic: Wired WDS?
Replies: 5
Views: 1137

Re: Wired WDS?

Hello! I've been looking at different solutions for the best WiFi system which supports roaming for all devices. I've been looking at MikroTik WDS & Mesh, and i'm just wondering if it's possible to make all MikroTik AP's broadcast with the same SSID, MAC, Channel and communicate this between eachot...
by Miracle
Wed Nov 23, 2016 2:24 am
Forum: General
Topic: HotSpot DoS
Replies: 10
Views: 1434

Re: HotSpot DoS

Change arp of hotspot bridge to read only.
by Miracle
Thu Nov 17, 2016 11:30 am
Forum: General
Topic: [SOLVED] RB3011UiAS + USB 3.0 thumb drive
Replies: 12
Views: 4624

Re: RB3011UiAS + USB 3.0 thumb drive

I have solved the issue. They provided me with a new router and it works. Probably previous one was just faulty.
Does your read/write speed higher 30MB/s with USB 3.0 ?
by Miracle
Sat Nov 12, 2016 3:06 am
Forum: General
Topic: [SOLVED] RB3011UiAS + USB 3.0 thumb drive
Replies: 12
Views: 4624

Re: RB3011UiAS + USB 3.0 thumb drive

I use SanDisk Extreme CZ80 32Gb, RB3011 can detect it and work at 5000Mbps
I format ext3, upload via ftp avarage 5MB/s, download 30MB/s (80MB/200MB when plugin to pc).

Image
Image
Image
by Miracle
Fri Nov 11, 2016 2:59 pm
Forum: General
Topic: How to create Redundancy
Replies: 6
Views: 961

Re: How to create Redundancy

Dear Understood,
But here i want the link between router boards as a backup link...
if any of one routerboard disconnected from the core router due to cable or any switch fault...
It should be connected via 2nd RouterBoard..
Make 2 vlan from R1, then add them to bridge as backup link ?
by Miracle
Tue Nov 01, 2016 12:37 pm
Forum: General
Topic: Layer2 Failover
Replies: 21
Views: 3088

Re: Layer2 Failover

I won't suggest bonding over different media as you are facing different latencies. I'd advise to use RSTP as well. Enable RSTP on both bridges the links are terminating on and give the fiber bridge ports a lower (i.e. higher number) priority. Probably even a higher path cost. Give the router with ...
by Miracle
Tue Nov 01, 2016 11:34 am
Forum: General
Topic: Layer2 Failover
Replies: 21
Views: 3088

Re: Layer2 Failover

Did you try interface bonding as active backup ?
http://wiki.mikrotik.com/wiki/Manual:Interface/Bonding
by Miracle
Mon Oct 31, 2016 12:29 pm
Forum: Beginner Basics
Topic: Configure CCR1009 Multi VLANS to CRS125
Replies: 7
Views: 1095

Re: Configure CCR1009 Multi VLANS to CRS125

Ex:
Vlan10: 10.0.10.0/24
Vlan20: 10.0.20.0/24

Go to IP > firewall > mangle > add new (ccr1009)
Image
by Miracle
Mon Oct 31, 2016 12:04 pm
Forum: Beginner Basics
Topic: Configure CCR1009 Multi VLANS to CRS125
Replies: 7
Views: 1095

Re: Configure CCR1009 Multi VLANS to CRS125

You must add prerouting fillter accept src/dst address is ip range of both bridge
Don't use port 4 of ccr1009, it share speed with port 1,2,3.
by Miracle
Mon Oct 31, 2016 12:04 pm
Forum: Beginner Basics
Topic: Configure CCR1009 Multi VLANS to CRS125
Replies: 7
Views: 1095

Re: Configure CCR1009 Multi VLANS to CRS125

You must add prerouting fillter accept src/dst address is ip range of both bridge
Don't use port 4 of ccr1009, it share speed with port 1,2,3.
by Miracle
Sun Oct 30, 2016 2:24 pm
Forum: The Dude
Topic: Best Device to run Dude
Replies: 23
Views: 5512

Re: Best Device to run Dude

I am using ccr1009 with sandisk microsd for 450 hotspot clients.
I tested sandisk and samsung microsd, they run very fast.
by Miracle
Sun Oct 09, 2016 12:59 pm
Forum: RouterBOARD hardware
Topic: HAP AC
Replies: 540
Views: 134262

Re: HAP AC

Guys, please add a new feature - completely disable all leds (power led can be enabled). It is very difficult to sleep with disco-light on the roof.
Just apply black tape on them.
by Miracle
Sat Oct 01, 2016 10:17 am
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 34837

Re: v6.37 [current] is released!

Dynamic queue from hotspot get wrong priority
I tried to set priority 6,7,8, not specified then update user profile, reset hotspot server but priority of dynamic queue still 1

Image
by Miracle
Thu Sep 15, 2016 6:21 am
Forum: SwOS
Topic: SwOS v1.17 --> RB260GSP --> blank HTML
Replies: 6
Views: 1664

Re: SwOS v1.17 --> RB260GSP --> blank HTML

Same trouble with 260GS. I was able to recover the more recent of the two with the procedure here . Unfortunately, my earlier entrant into the "dumb switch" category never gets to the point of blinking the "ACT" LED, and never attempts to retrieve the firmware. Apparently even its recovery boot cod...
by Miracle
Thu Sep 15, 2016 3:35 am
Forum: SwOS
Topic: SwOS v1.17 --> RB260GSP --> blank HTML
Replies: 6
Views: 1664

Re: SwOS v1.17 --> RB260GSP --> blank HTML

Same trouble with 260GS.
by Miracle
Fri Sep 09, 2016 8:29 am
Forum: General
Topic: A wireless router for 50 concurrent users
Replies: 16
Views: 2975

Re: A wireless router for 50 concurrent users

I think you need 3 AP, keep concurrent connections under 20 per AP for best performance and stable (AP set channel 1,6,11 or 1,5,9,13)
by Miracle
Sun Sep 04, 2016 8:06 am
Forum: General
Topic: Show Password in Winbox
Replies: 6
Views: 23264

Re: Show Password in Winbox

open 'New Terminal' then type 'export'

http://wiki.mikrotik.com/wiki/Manual:Co ... figuration
by Miracle
Mon Aug 22, 2016 1:32 pm
Forum: Forwarding Protocols
Topic: RSTP loops
Replies: 5
Views: 1620

Re: RSTP loops

Hi,

thank you for your answer!
I have already modified the path costs.
I tried to change the root bridge to B or C but I got loop always when I put more than 1 backup link.

regards, Gabor
Set Horizon different in Bridge - port
by Miracle
Mon Aug 08, 2016 10:35 am
Forum: General
Topic: Choose router?
Replies: 29
Views: 3365

Re: Choose router?

Guys i am running my wifi network with x86 routeros for 2 years and decided to move to CCR1009-x but i need your advice in 2 things - CCR1009 came with microsd card slot and microUSB type AB slot, which one of those u suggest me to move user manager too, forgive me for such a basic question cause i...
by Miracle
Sun Jul 24, 2016 11:01 am
Forum: General
Topic: user manager is used 98% - help me?
Replies: 1
Views: 321

Re: user manager is used 98% - help me?

hello
i have router board 1100
my database is 1,4 mb but the user manager give me used 98%
why is it?
info:
I reset the database in RB 1100  and replace the database is taken from router bord 450g 
please can any one help me ?
skype: sameer123-4
Did you try rebuild it ? (under Maintenance frame)
by Miracle
Tue Jul 12, 2016 8:16 am
Forum: General
Topic: Choose router?
Replies: 29
Views: 3365

Re: Choose router?

Which microSD? You see, there's 2 things we must pay attention to: 1) A "Class10" microSD has a guaranteed minimum speed of 10MB/s. But it doesn't say anything about the effective speed. A SD capable of 15MB/s is class10 - but a capable of 50MB/s is class10 too. 2) Wich microSD you used? Maybe it's...
by Miracle
Mon Jul 11, 2016 6:45 am
Forum: General
Topic: Choose router?
Replies: 29
Views: 3365

Re: Choose router?

Micro SD not good for random write, I tried Apacer 16G class10, Transcend 16G class10, Sandisk 4G class 4 They are running fine with fat32, but some time it's lost all database and require to format after power outage Then I tried ext3, I/O very low, write delay 1000 ~ 10000ms and timeout ~ 5% fat3...
by Miracle
Mon Jul 11, 2016 5:35 am
Forum: General
Topic: Choose router?
Replies: 29
Views: 3365

Re: Choose router?

even the mighty ccr1072 have only 128mb of nand, the rb1100ahx2 too I tried some microsd but IO very slow. Which microSD? You see, there's 2 things we must pay attention to: 1) A "Class10" microSD has a guaranteed minimum speed of 10MB/s. But it doesn't say anything about the effective speed. A SD ...
by Miracle
Sat Jul 09, 2016 11:10 am
Forum: General
Topic: Choose router?
Replies: 29
Views: 3365

Re: Choose router?

If money is no object (must be nice), go big.  We have a ccr1009-8g-1s-1s+ that serves about 2000 customers, runs nearly 800 megs during peak time and the CPU does not work hard at all!  In fact, the other day we were the victim in a massive DOS attack and the router was running about 30% on the cp...
by Miracle
Fri Jul 08, 2016 4:19 am
Forum: General
Topic: Choose router?
Replies: 29
Views: 3365

Re: Choose router?

If money is no object (must be nice), go big.  We have a ccr1009-8g-1s-1s+ that serves about 2000 customers, runs nearly 800 megs during peak time and the CPU does not work hard at all!  In fact, the other day we were the victim in a massive DOS attack and the router was running about 30% on the cp...
by Miracle
Fri Jul 08, 2016 4:05 am
Forum: General
Topic: CRS125/CRS226/etc - Help with port isolation!
Replies: 5
Views: 988

Re: CRS125/CRS226/etc - Help with port isolation!

You can set more than a Master port ?
by Miracle
Sat Jul 02, 2016 7:02 am
Forum: General
Topic: Help !!!!! Load Balance PCC 3 Wan. Added Wan 4 drop internet speed.
Replies: 16
Views: 2632

Re: Help !!!!! Load Balance PCC 3 Wan. Added Wan 4 drop internet speed.

so the internet speed drop because the router RB2011 can't handle it ? Not because of the config ?? Yes, CPU AR9344 not enough power You can do it with 200Mbps single WAN, but it can't run PCC loadblancing more than 70Mbps but im using load balance with 3 wan and it has 140mbits and it worked fine ...
by Miracle
Fri Jul 01, 2016 8:04 pm
Forum: General
Topic: Help !!!!! Load Balance PCC 3 Wan. Added Wan 4 drop internet speed.
Replies: 16
Views: 2632

Re: Help !!!!! Load Balance PCC 3 Wan. Added Wan 4 drop internet speed.

You should upgrade to RB1100 or CCR1009
so the internet speed drop because the router RB2011 can't handle it ?
Not because of the config ??
Yes, CPU AR9344 not enough power
You can do it with 200Mbps single WAN, but it can't run PCC loadblancing more than 70Mbps
by Miracle
Fri Jul 01, 2016 1:48 pm
Forum: General
Topic: Help !!!!! Load Balance PCC 3 Wan. Added Wan 4 drop internet speed.
Replies: 16
Views: 2632

Re: Help !!!!! Load Balance PCC 3 Wan. Added Wan 4 drop internet speed.

You should upgrade to RB1100 or CCR1009
by Miracle
Thu Jun 30, 2016 9:28 pm
Forum: General
Topic: Long Cat-5 Run
Replies: 6
Views: 814

Re: Long Cat-5 Run

10BASE-T use 2 pairs, split your 4 pairs cable to 2 lines then bonding (LACP) them
Just cost 4 RJ45 connector to have 20mb
by Miracle
Mon Apr 25, 2016 4:04 am
Forum: General
Topic: now hotspot user can see balance data from status page
Replies: 11
Views: 9145

Re: now hotspot user can see balance data from status page

hi
my client in network have limit on using internet they should buy some amount of gigabytes each time for using internet. I want they could see how much gigabyte remain for them in their status page?
$(remain-bytes-total) or $(remain-bytes-total-nice)

Tested on 6.30 -> 6.35
by Miracle
Sat Mar 12, 2016 3:19 pm
Forum: Announcements
Topic: v6.34.3 [current] is released!
Replies: 58
Views: 15851

Re: v6.34.3 [current] is released!

CCR1009-8G-1S-1S+ active cooling but now lost fan speed and psu status

Image
by Miracle
Sat Mar 12, 2016 12:55 pm
Forum: General
Topic: How to update ssl ?
Replies: 2
Views: 645

Re: How to update ssl ?

Can someone help me ?

Image
by Miracle
Tue Mar 08, 2016 3:50 am
Forum: General
Topic: How to update ssl ?
Replies: 2
Views: 645

How to update ssl ?

I using CCR1009-8G-1S-1S+ version 6.34.2 (stable)
With a valid certificates from comodo
COMODO RSA Domain Validation Secure Server CA
When I open https://mydomain.com, chrome warning
Your connection to mydomain.com is encrypted using an obsolete cipher suite.
by Miracle
Sat Mar 05, 2016 2:32 am
Forum: RouterBOARD hardware
Topic: Underclock or disable processors on CCR1036-8G-2S+
Replies: 17
Views: 2023

Re: Underclock or disable processors on CCR1036-8G-2S+

I think disable processor by software don't save electric power. (Frequency, die voltage are fixed)
They need to make it like intel's cpu :lol:
by Miracle
Fri Feb 26, 2016 6:12 pm
Forum: Wireless Networking
Topic: Balance connected customers between AP - s
Replies: 12
Views: 2794

Re: Balance connected customers between AP - s

Hi all, any clue if the solutions provided in this topic worked ? I am asking because i have to front the challenge to manage to configure 5 ap's that should covering a single conference room in order to provide internet access to 200 - 300 peoples. The challenge that i see it's to try to balance c...
by Miracle
Fri Feb 26, 2016 5:39 pm
Forum: General
Topic: Poor performance of Cloud Core Router - CCR1009-8G-1S-1S+
Replies: 2
Views: 879

Re: Poor performance of Cloud Core Router - CCR1009-8G-1S-1S+

CCR is multi thread cpu so it cause out of order udp packets ?
by Miracle
Wed Feb 17, 2016 6:17 pm
Forum: The User Manager
Topic: Auto disconnect old connection when new connection exceeds "shared-users"?
Replies: 1
Views: 1016

Re: Auto disconnect old connection when new connection exceeds "shared-users"?

My idea is set shared-users = n+1 then write script kick the oldest user when number clients reach n+1
by Miracle
Mon Feb 15, 2016 7:48 am
Forum: Wireless Networking
Topic: Printer Access with "client to client forwarding" disabled
Replies: 6
Views: 1250

Re: Printer Access with "client to client forwarding" disabled

Add more IP address for router then nat forward it from printer's IP to new router's IP
by Miracle
Fri Jan 29, 2016 5:09 pm
Forum: Announcements
Topic: v6.34 [current] is released!
Replies: 91
Views: 22902

Re: v6.34 [current] is released!

Does anyone tested on CCR1009 ?
by Miracle
Sat Jan 23, 2016 1:29 pm
Forum: The User Manager
Topic: Translate Errors Messages
Replies: 2
Views: 1870

Re: Translate Errors Messages

Hi Dears I use the Hotspot with Usermanger I want to Translate the Errors messages that apear in the Login Page for User to my native language like this message .... ( No Valid Profile Found ) , ( simultaneous session limit reached ) ...etc i try to change the Error.txt file in the Hotspot Foulder ...
by Miracle
Tue Dec 22, 2015 6:31 am
Forum: RouterBOARD hardware
Topic: CCR1009-8G-1S-1S+ is a BEST ROUTER !!!
Replies: 19
Views: 6023

Re: CCR1009-8G-1S-1S+ is a BEST ROUTER !!!

CCR1009 HDD only 128Mb, (70Mb useable) while RAM 2GB
You need sdcard for running usermanger
by Miracle
Mon Dec 07, 2015 4:49 am
Forum: General
Topic: is it possible to share an address-list with other routeros?
Replies: 3
Views: 873

Re: is it possible to share an address-list with other route

No, you cannot. At least not with built in tools. You can write a script that collects that info, writes it to a file, uses "/tool fetch" to push it to the other router, which can then auto execute it. This is unlikely to scale because the built in scripting language cannot handle files larger than...
by Miracle
Wed Nov 25, 2015 8:05 am
Forum: General
Topic: MikroTik Load Balance Types .. pppoe clients
Replies: 8
Views: 1327

Re: MikroTik Load Balance Types .. pppoe clients

PCC load blancing 2 WAN PPOE

https://aacable.wordpress.com/2013/12/0 ... oe-server/

I'm using this for load blancing 8 WAN PPOE
mikload.png
by Miracle
Fri Sep 11, 2015 9:08 am
Forum: General
Topic: Cable test
Replies: 4
Views: 1411

Cable test

I run cable test and it report the 2nd pairs is open
But I don't know the 2nd pairs's color ?
I use T568B for my cable

Thank you