MikroTik

Miracle

Maybe they use low quality thermal paste ?

Miracle

Use watchdog it will auto reboot (if it not work try disable interface on otherside).

Miracle

You have to use active backup on bonding.
Netwatch must trigger swap poe on off both ports, delay enough time for both side reconnect wireless.

Miracle

My mistake... Miracle can you ping your device when there is no access to it? Yes, it reply ping but no data forward or login winbox, web long runs of cable require high quality cable, and good cabling installation practices to operate properly try certifying cabling to discard it as a cause long c...

Miracle

Do you see any link downs in the ethernet ports? If no then the problem is not the cable distance.

It's work well when I test with short cable.

Miracle

They are troubles when use Realtek / MediaTek switch.

Try shorter cable ?

Miracle

Disconnect console before install

Miracle

Bridge->host

Miracle

You can do almost everythings on winbox
CLI for backup, clone device setup

Miracle

Some uptime monitor service: uptimerobot.com pingdom.com...
Use them to monitor your ddns address, they can send email, sms, app arlert.

Miracle

Works fine, admin is the problem Well, I'm just telling my feeling after comparing to the cheapest TP-Link mesh kit with k/v/r supported system, it makes my hAP AC2 + cAP AC looks like an idiot. Maximum download speed, roaming performance, handling multi clients, stability, all lost. A person here ...

Miracle

I replace RB750Gr2 by new RB750Gr3,
3 ether ports have long cable (80m-90m) connect to RB750Gr2, CRS125, TPlink SG108E. It's random crash, I can not connect via ip, romon.
Watchdog auto reboot work if I disable uplink when RB750Gr3 unresponse.
Mediatek switch is worse than Qualcomm ?

Miracle

Look like cpu throtting when it lack power.
Check cable and power adaptor, POE require good cable (should be pure copper).

Miracle

I get only "Sorry, your request cannot be accepted." (http 403) in my office, in my home and on my phone via mobile operator. Looks like your blacklist is quite big

Only 127.0.0.1 in white list

Miracle

I've got DNS over TLS working on my hEX! If you've rooted your device (don't contact MT for support if you do this!) it's quite straightforward to install. Since cloudflared is written in Go, it's easy to cross-compile and the only thing it needs to operate is a ca-certificates.crt bundle which I c...

Miracle

Mac Address leaked from VLAN to main interface (CCR1009, Hex r3), I have 2 bridge same mac, it cause packet loop due leaked. What do you mean? As far as I remember, VLAN has always had the same MAC address as its parent Ethernet interface. And, as always, you can freely change MAC address of bridge...

Miracle

Client in state Automatic Power Save Delivery ?
https://routerguide.net/wmm-apsd-on-or-off/

Disable wmm and test agian ?

Miracle

...for the most part very ill suited really to networking functions and tasks... Why so harsh judgement? Tile is great for massive parallel tasks. What is typical paralelized task in networking? Packet forwarding/filtering ... Obviously there are issues due to low market penetration but that has no...

Miracle

Why don't use x86 ?
Intel Xeon D-2100 or AMD EPYC 3000

Miracle

When I set comment for PPTP client, it reconnect ! New feature ? It has always been like that. Changing comment on any interface brings that interface down and then back up. PS. The next time you post to a release topic please make sure you are reporting a problems that is specific to (was introduc...

Miracle

When I set comment for PPTP client, it reconnect !
New feature ?

Mac Address leaked from VLAN to main interface (CCR1009, Hex r3), I have 2 bridge same mac, it cause packet loop due leaked.

Miracle

My RB3011 port 5,6 flapping every day.
I add 2nd power supply over port POE, port flapping gone.

Miracle

Yes, we are aware of this peculiarity and we are working also on new routers that have higher power per core, not just many cores.

Please do some CCR with ARM or x86

Miracle

thank a lot

www.youtube.com in my country is filtered by the government
I can not use the dns trick !!!

Please provide a good solution

Please provide a good solution

Why goverment filtered while you can access youtube.com ?

Google edge cache using ISP's address in some country.

Miracle

Mikrotik can config to run multiwan and zero packet loss when switch line.
Hire consultants they will do it for you

Miracle

Place local queue above internet queue.
Very simple !

Miracle

I see diffirent in your config and others is wmm
You should disable it. Will reduce battery life but connect always on

Miracle

Vlan switch chip not working like their wiki after 6.40

Miracle

Why you can not change ip 192.168.100.1 ?
I sugguest use bridge mode.

Miracle

Hi there,

how is it possible to force login after a user authenticate on an hot spot?

Almost mobile device force close hotspot login page immediately when hotspot login success, so redirect don't work here

Miracle

I've been waiting for along time MikroTik can provide alternative port for IP DNS Setting, other than 53 (default) normally user input value ip address such as 8.8.8.8 and 8.8.4.4 for IP DNS Setting alternative port, for example, can be set as easy as 8.8.8.8:553 and 8.8.4.4:533 The purpose is to g...

Miracle

They stream from domain like this r1.sn-npoeenee.googlevideo.com But address-list can not add wildcard subdomain so very hard to filter youtube traffic. thank you very much ...do you mean that there is no aim from limitation the youtube speed ??!!!!!! you say / ican do something with address - list...

Miracle

They stream from domain like this
r1.sn-npoeenee.googlevideo.com

But address-list can not add wildcard subdomain so very hard to filter youtube traffic.

Miracle

Seem your internet connect is behind an NAT router.
You must have a direct internet connect.

Miracle

https://wiki.mikrotik.com/wiki/Manual:Tools/email

Add "tls=yes" after send

Miracle · Re: 16/32/48 ports I need 8/16 port SWOS

I need 8/16 port SWOS

Miracle

Increase hotspot - idle timeout

Miracle

use layer 7 to block p2p now. After that you create mangle rules to shape that traffic. L7 can read data encrypted ??? I suggest you read more about layer 7 on mikroti wiki @ wiki.mikrotik.com. as for how to setup the rules, I have attached screen shot that will guide u. Your solution won't work wh...

Miracle

use layer 7 to block p2p now. After that you create mangle rules to shape that traffic.

L7 can read data encrypted ???

Miracle

Add a filter rule that accept forward tracffic from ip pool to gateway ip
PPOE client must use gateway ip 150.xxx.x.1

Miracle

P2P now encrypted, how do you know they download torrent ?

Miracle

I can not force hotspot user using https after upgrade to 6.40.3.
Both http and https working althought I try disable www service.

Miracle

Uncheck Transparent proxy
Dude, It's work very well. Thanks
How do you explain that?

When it checked all http traffic will going to mikrotik proxy server (consume router's resource) and you can trigger to run advertisment popup.

Miracle

Hi, I need your help and experience to do the following. I need to prepare a event with 1200 concurrent wireless users (smarthphones, tablets). I was thinking to use the mikrotik dual band 2.4 and 5Ghz. Maybe a mix Metal and Groove. The local is as open space building. My question is how many AP´s ...

Miracle

Uncheck Transparent proxy

Miracle

CHR should run containers, docker or whatever.
Thats great
+1
Please clarify how you would use it and why

To run other webserver, mysql...

And please make CHR easy to install like other OS

Miracle

CHR should run containers, docker or whatever.

Thats great
+1

Miracle

I got you. Why not use 6.40 then until 6.40.3 release?

6.40 can not use torch on ppp.
Routeros so much bugs ....

Miracle

Please release 6.40.3 asap. I can't run hotspot server now. what's the problem with hotspot server in 6.38.7, for example? www and www-ssl unresponsive randomly from 6.40.1 but 6.38.7 (actual bugfix version) should not be affected, that's why I ask I concern vlan and bridge error when downgrade. My...

Miracle

Please release 6.40.3 asap.
I can't run hotspot server now.
what's the problem with hotspot server in 6.38.7, for example?

www and www-ssl unresponsive randomly from 6.40.1

Miracle

Yes, WWW crash is fixed in 6.41rc version: https://forum.mikrotik.com/viewtopic.php?f=21&t=123936&start=100#p614770 This fix will be included also in 6.40.3 version. It was made too late when 6.40.2 was already built and being tested for release. Please release 6.40.3 asap. I can't run hots...

Miracle

Did you fix www unresponsive ?

Miracle

Onecloud (oneprovider.com) can install routeros chr.
They have hongkong server (leaseweb.com)

Miracle

Please fix www unresponse in 6.40.2, I don't want upgrade to 6.41

Miracle

It is a nice marketing trick to buy their products, other than that mostly it is waste of resources.

Or Mikrotik make some feature monitor and analytics connect to detect unusual traffic (ex hacker thief data) ?

Miracle

Just order, they will contact you to make it compatible with your device before shipping.

Miracle

I got same problem.
I have to use netinstall to reinstall 2 Basebox2 from 6.37.1 to 6.38.1 and I have 6 Basebox 2 stuck at 6.37.1 in producing now.

Miracle

Your problem can be solved easily.
Drink a bottle of rum and see if you still care.

Agree
Loadblancing multicore and new trouble come like out of order packet

Miracle

Https Not redirect to login page .
http not problem .

i want https redirect to my login page.

It's true!
You can not change that

Miracle

Changes with RSTP is a complete disaster!!! IMHO such changes are not the subject for release branch! RPVST was great approach with high level of flexibility. Now if we just update all our routers in L2 segment it won't work at all (fortunately tested on the table) and I'm talking about network tha...

Miracle

Please support let's encrypt
thanks

Miracle

Hello! I've been looking at different solutions for the best WiFi system which supports roaming for all devices. I've been looking at MikroTik WDS & Mesh, and i'm just wondering if it's possible to make all MikroTik AP's broadcast with the same SSID, MAC, Channel and communicate this between ea...

Miracle

Change arp of hotspot bridge to read only.

Miracle

I have solved the issue. They provided me with a new router and it works. Probably previous one was just faulty.

Does your read/write speed higher 30MB/s with USB 3.0 ?

Miracle

I use SanDisk Extreme CZ80 32Gb, RB3011 can detect it and work at 5000Mbps
I format ext3, upload via ftp avarage 5MB/s, download 30MB/s (80MB/200MB when plugin to pc).

Miracle

Dear Understood,
But here i want the link between router boards as a backup link...
if any of one routerboard disconnected from the core router due to cable or any switch fault...
It should be connected via 2nd RouterBoard..

Make 2 vlan from R1, then add them to bridge as backup link ?

Miracle

I won't suggest bonding over different media as you are facing different latencies. I'd advise to use RSTP as well. Enable RSTP on both bridges the links are terminating on and give the fiber bridge ports a lower (i.e. higher number) priority. Probably even a higher path cost. Give the router with ...

Miracle

Did you try interface bonding as active backup ?
http://wiki.mikrotik.com/wiki/Manual:Interface/Bonding

Miracle

Ex:
Vlan10: 10.0.10.0/24
Vlan20: 10.0.20.0/24

Go to IP > firewall > mangle > add new (ccr1009)

Miracle

You must add prerouting fillter accept src/dst address is ip range of both bridge
Don't use port 4 of ccr1009, it share speed with port 1,2,3.

Miracle

You must add prerouting fillter accept src/dst address is ip range of both bridge
Don't use port 4 of ccr1009, it share speed with port 1,2,3.

Miracle

I am using ccr1009 with sandisk microsd for 450 hotspot clients.
I tested sandisk and samsung microsd, they run very fast.

Miracle

Try store them in "comment"

Miracle

Guys, please add a new feature - completely disable all leds (power led can be enabled). It is very difficult to sleep with disco-light on the roof.

Just apply black tape on them.

Miracle

Dynamic queue from hotspot get wrong priority
I tried to set priority 6,7,8, not specified then update user profile, reset hotspot server but priority of dynamic queue still 1

Miracle

Same trouble with 260GS. I was able to recover the more recent of the two with the procedure here . Unfortunately, my earlier entrant into the "dumb switch" category never gets to the point of blinking the "ACT" LED, and never attempts to retrieve the firmware. Apparently even i...

Miracle

Same trouble with 260GS.

Miracle

I think you need 3 AP, keep concurrent connections under 20 per AP for best performance and stable (AP set channel 1,6,11 or 1,5,9,13)

Miracle

open 'New Terminal' then type 'export'

http://wiki.mikrotik.com/wiki/Manual:Co ... figuration

Miracle

Hi,

thank you for your answer!
I have already modified the path costs.
I tried to change the root bridge to B or C but I got loop always when I put more than 1 backup link.

regards, Gabor

Set Horizon different in Bridge - port

Miracle

Guys i am running my wifi network with x86 routeros for 2 years and decided to move to CCR1009-x but i need your advice in 2 things - CCR1009 came with microsd card slot and microUSB type AB slot, which one of those u suggest me to move user manager too, forgive me for such a basic question cause i...

Miracle

hello
i have router board 1100
my database is 1,4 mb but the user manager give me used 98%
why is it?
info:
I reset the database in RB 1100 and replace the database is taken from router bord 450g
please can any one help me ?
skype: sameer123-4

Did you try rebuild it ? (under Maintenance frame)

Miracle

Which microSD? You see, there's 2 things we must pay attention to: 1) A "Class10" microSD has a guaranteed minimum speed of 10MB/s. But it doesn't say anything about the effective speed. A SD capable of 15MB/s is class10 - but a capable of 50MB/s is class10 too. 2) Wich microSD you used? ...

Miracle

Micro SD not good for random write, I tried Apacer 16G class10, Transcend 16G class10, Sandisk 4G class 4 They are running fine with fat32, but some time it's lost all database and require to format after power outage Then I tried ext3, I/O very low, write delay 1000 ~ 10000ms and timeout ~ 5% fat3...

Miracle

even the mighty ccr1072 have only 128mb of nand, the rb1100ahx2 too I tried some microsd but IO very slow. Which microSD? You see, there's 2 things we must pay attention to: 1) A "Class10" microSD has a guaranteed minimum speed of 10MB/s. But it doesn't say anything about the effective sp...

Miracle

If money is no object (must be nice), go big. We have a ccr1009-8g-1s-1s+ that serves about 2000 customers, runs nearly 800 megs during peak time and the CPU does not work hard at all! In fact, the other day we were the victim in a massive DOS attack and the router was running about 30% on the cp...

Miracle

If money is no object (must be nice), go big. We have a ccr1009-8g-1s-1s+ that serves about 2000 customers, runs nearly 800 megs during peak time and the CPU does not work hard at all! In fact, the other day we were the victim in a massive DOS attack and the router was running about 30% on the cp...

Miracle

You can set more than a Master port ?

Miracle

so the internet speed drop because the router RB2011 can't handle it ? Not because of the config ?? Yes, CPU AR9344 not enough power You can do it with 200Mbps single WAN, but it can't run PCC loadblancing more than 70Mbps but im using load balance with 3 wan and it has 140mbits and it worked fine ...

Miracle

You should upgrade to RB1100 or CCR1009
so the internet speed drop because the router RB2011 can't handle it ?
Not because of the config ??

Yes, CPU AR9344 not enough power
You can do it with 200Mbps single WAN, but it can't run PCC loadblancing more than 70Mbps

Miracle

You should upgrade to RB1100 or CCR1009

Miracle

10BASE-T use 2 pairs, split your 4 pairs cable to 2 lines then bonding (LACP) them
Just cost 4 RJ45 connector to have 20mb

Miracle

hi
my client in network have limit on using internet they should buy some amount of gigabytes each time for using internet. I want they could see how much gigabyte remain for them in their status page?

$(remain-bytes-total) or $(remain-bytes-total-nice)

Tested on 6.30 -> 6.35

Miracle

CCR1009-8G-1S-1S+ active cooling but now lost fan speed and psu status

Miracle

Can someone help me ?

Miracle

I using CCR1009-8G-1S-1S+ version 6.34.2 (stable)
With a valid certificates from comodo

COMODO RSA Domain Validation Secure Server CA

When I open https://mydomain.com, chrome warning

Your connection to mydomain.com is encrypted using an obsolete cipher suite.

Miracle

I think disable processor by software don't save electric power. (Frequency, die voltage are fixed)
They need to make it like intel's cpu

Miracle

Hi all, any clue if the solutions provided in this topic worked ? I am asking because i have to front the challenge to manage to configure 5 ap's that should covering a single conference room in order to provide internet access to 200 - 300 peoples. The challenge that i see it's to try to balance c...

Miracle

CCR is multi thread cpu so it cause out of order udp packets ?

Miracle

My idea is set shared-users = n+1 then write script kick the oldest user when number clients reach n+1

Miracle

Add more IP address for router then nat forward it from printer's IP to new router's IP

Miracle

Does anyone tested on CCR1009 ?

Miracle

CCR1009 HDD only 128Mb, (70Mb useable) while RAM 2GB
You need sdcard for running usermanger

Miracle

No, you cannot. At least not with built in tools. You can write a script that collects that info, writes it to a file, uses "/tool fetch" to push it to the other router, which can then auto execute it. This is unlikely to scale because the built in scripting language cannot handle files l...

Miracle

PCC load blancing 2 WAN PPOE

https://aacable.wordpress.com/2013/12/0 ... oe-server/

I'm using this for load blancing 8 WAN PPOE

mikload.png

Miracle

I run cable test and it report the 2nd pairs is open
But I don't know the 2nd pairs's color ?
I use T568B for my cable

Thank you

Search found 106 matches