Any Solution?
I have the same problem.
In Sophos XG 210, Winbock is bloqued in category Torrent Clients P2P

I have the dime problem.

I reset and after brick

https://youtu.be/vBAgbNVZngs

I noticed today an unusual login to my router exposed to external ip. Router had only winbox 8129, ssh on the changed high port and pptp on the default port. Version 6.41.3 The password is random char + numbers + special chars and nowhere else used. Login to my router: https://i.imgur.com/c4W8YGt.p...

We have several CCR1072s in our core and in the last 2 days we have had 2 watchdog reboots. one with the router on 6.38.5 and the other with the router on 6.39.2. What could be causing it and what should I do to prevent it in the future. Hi I have same problem with CCR1019. So I disable whatdog Env...

I have equals.


The ip is 0.0.0.0.

With winbox neigjbors i see Mikrotik 2011 with MAC. But login Error could not Connect.

Hi:
I am Router RB2011iL-RM
Firmware 6.37.1

The router is reset only every 3 to 5 minutes.
Interfaces are turned off. the beep is heard, and restarted

https://www.youtube.com/watch?v=vBAgbNVZngs

Is it a hardware problem?

Log is Empty
Watchdog is off

Traceroute from Mikrotik: Trace to 10.116.40.190 (OK) # ADDRESS LOSS SENT LAST AVG BEST WORST STD-DEV ST.. 1 192.168.25.1 0% 21 0.5ms 0.6 0.4 2.2 0.4 ... ... 6 10.116.40.190 0% 21 28.4ms 28.7 28.1 33.2 1 Traceroute from PC Trace a 10.116.40.190 (ERROR) 1 5 ms 2 ms 1 ms shaas.loc [192.168.1.1] 2 * *...

I am one Bridge in Eth2,Eth3 y Eth4 for LAN (192.168.1.0/24) 1-Should I add the eth5 within the Bridge? Currently it is not 2- This is my commands /ip address add address=192.168.25.254 interface=ether5 netmask=255.255.255.0 network=192.168.25.0 /ip route add dst-address=10.116.40.190 gateway=192.16...

Hello..
I need help..
How do I make 10.116.40.190 IP traffic to go out the ETH5 ?
The rest by the ISP that is in the ETH1