It's possible client isolation on the Cisco AP is at fault. Check the SSID settings I believe. Alternatively verify no ACLs are set on that SSID on the controller or anywhere else that might be interfering. Shouldn't require anything otherwise, the VLAN wired to a MikroTik connected as a station (l...
Hi guys, I'm trying to create Layer 2 tunnel between 2 Mikrotik devices via Cisco Lightweight AP connected to Cisco wireelss controller. (Capwap tunnel) Mikrotik 1 (acting as server) is connected (wired) to the same VLAN that the WLC is pushing to the SSID that Mikrotik 2 (client) is connecting to. ...
You're right, it's system-dns=yes I use XML mobileconfig file, read here: https://wiki.strongswan.org/projects/strongswan/wiki/AppleIKEv2Profile Can I have a copy of your ios mobileconfig? Just use the "EAP authentication (base template)" and then replace the parts for "Pre-shared ke...
I got it working with Pre-Shared key with my iPhone using this config: /ip pool add name=rw-pool ranges=192.168.77.2-192.168.77.254 /ip ipsec policy set 0 level=unique dst-address=192.168.77.0/24 /ip ipsec mode-conf add name=cfg1 send-dns=yes address-pool=rw-pool address-prefix=32 /ip ipsec peer add...
v6.38rc37 and I'm still having trouble with L2TP/IPSec VPN. Policy is "port override" and I'm getting "...failed to pre-process ph2 packet." Anyone with the same issue?
Currently it works wit Macs with psk and should work wit certificates without eap. In the future it will be possible to use EAP with RADIUS server. Ok, got it working with iOS with certificates (enc 3des, auth sha1, esn off), but I'm getting extremely slow speeds? ICMP pings look fine, but Speedtes...
Guys, it's working fine with Windows 10 and client certificate. But not working with iOS or MacOS :/ 16:11:29 ipsec,debug payload seen: ID_I 16:11:29 ipsec,debug payload seen: NOTIFY 16:11:29 ipsec,debug payload seen: NOTIFY 16:11:29 ipsec,debug payload seen: ID_R 16:11:29 ipsec,debug payload seen: ...
Hi guys, I'm completely frustrated. hAP Lite v 6.36 I'm setting up VPN for a friend. Internet is PPPoE, fast, no problems. PPTP is working excellent, DNS reponds are very fast, max speed. However if I use L2TP/IPsec, DNS requests are not working at all. Same with SSTP. nslookup on client gives me ti...
Guys, please someone help me port forward a damn IIS server running a webpage with Websockets: https://en.wikipedia.org/wiki/WebSocket I know websockets are running on top of port 80 HTTP protocol, but simple dst-nat forwarding is not working... Server is respoding perfectly on the local network, bu...
Hi guys, I upgraded my router (RB2011UAS-RM) to the latest v6.33.5 and L2TP over IPSec (with pre-shared secret) stopped working. Clients receive error 789:The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer...
Guys, it's 2015 now, is there a solution to this problem in MT? I'm trying to route traffic from my VPN clients to other networks over SSTP with no success.... anyone with a solution?
Hi guys, I followed this tutorial to get LAN to LAN bridge over SSTP: https://youtu.be/E0_v6R2ppcg But almost all day I can't get routing to work between the local networks....please help. Here's the setup: 1. Router 1 has dual WAN with failover setup, as described here: https://youtu.be/dnLKyu4_md8...