Thanks, did not even realize.You have the same MAC address on both interfaces.
It is probably not a good idea to use Winbox's Copy facility for this, which is what I assume you did to end up with it like that.
This is also part of the issue,Disable default-forward
/interface ethernet set mtu=9000 [find]
Is the tx power set to manual tx power or regulatory domain?I'havn't no manage about power settings because in .ac device on the power section winbox can't show anything...Are you running the radios at full power?
Because -60 @200m seems a bit low.
Do you get any errors in the log?thank you buddy
i solved the above issues .
i just have 1 more problem here
when i connect lt2p "without" preshare key it connects
but as i set preshared key into my vpn client it wont connect
whats the matter?
Its based on the mac address yes.Hi!What you could do is add all the wifi devices you trust in the access list and disable default authentication.
Is access list based on the MAC address?
They was just announced a few days back,Does anybody know when we will have US availability of these? Can't seem to find them anywhere.
chain=dstnat action=dst-nat to-addresses=192.168.1.252 to-ports=4001 protocol=tcp dst-port=3389 log=no log-prefix=""
You should be able to decrease that cpu usage by dropping those packets in the Raw firewall table(if you are not doing it already)Real world testing CCR1036-8G-2S+. Dropping one million packets in DDoS attack.
/ip firewall mangle add chain=forward protocol=tcp tcp-flags=syn action=change-mss tcp-mss=1350