I see 6.49.8 is showing longterm, and 6.49.7 stable. Strange
/ip arp
add address=192.168.1.254 interface=ether1 mac-address=1C:57:3E:79:16:8F
/ip firewall nat chain=src-chain src-address=192.168.1.0/24 dst-address=192.168.1.0/24 out-interface={Your lan facing interface or bridge} action=masquerade
Well the answer for me was to just disable graphing on the device. Problem solved.Hi there,
we had same problem on CCR1036. we do everyday reboot at 04:00 AM.
After exchange for CCR2116 problem has gone.
Now we had same problem again on other CCR2116.
Anybody find solution without reboot?
I want to use it for non-payer IP's on a second routerI can send the address list to Splunk using script. On Splunk you can do a lot of stuff with it. What is your goal?
Thanks, did not even realize.You have the same MAC address on both interfaces.
It is probably not a good idea to use Winbox's Copy facility for this, which is what I assume you did to end up with it like that.
This is also part of the issue,Disable default-forward
-Chris
/interface ethernet set mtu=9000 [find]
Is the tx power set to manual tx power or regulatory domain?I'havn't no manage about power settings because in .ac device on the power section winbox can't show anything...Are you running the radios at full power?
Because -60 @200m seems a bit low.
Do you get any errors in the log?thank you buddy
i solved the above issues .
i just have 1 more problem here
when i connect lt2p "without" preshare key it connects
but as i set preshared key into my vpn client it wont connect
whats the matter?
Its based on the mac address yes.Hi!What you could do is add all the wifi devices you trust in the access list and disable default authentication.
Is access list based on the MAC address?
They was just announced a few days back,Does anybody know when we will have US availability of these? Can't seem to find them anywhere.