MikroTik

rabienz

I am also facing this problem in aligning such dishes because in w60 there is no alignment tool like in 5G and 2.4G

rabienz

Thank you for replying sindy i fixed the mask from 32 to 24 as for all vlans are /24 mask on another note i am still can't get the available bandwidth if its free since it is in simple queue limited do you have any idea about how to give the available bandwidth to offices if there is any and not all...

rabienz

you can use the following code

:if ([/interface wireless registration-table print count-only]=0) do={
  :delay 5m
  :if ([/interface wireless registration-table print count-only]=0) do={
    /system reboot
  }
}

rabienz

Hi,
Please anyone can help in this topic
Thanks in advance

rabienz

Any Reply Experts ?
Thanks

rabienz

dear all please help me accomplish this since many scenarios on forum not match this case and not a clear solution for this. Thanks in advance i have 2 wan links with pcc one is 8m and the other is 18m i have 65 separated offices with vlans starting 10.0.1.0 till 10.0.65.0 and having dhcp server for...

rabienz

If I don't know the starting point, I cannot give you a step-by-step guide. Press the [terminal] button in WebFig or Winbox and follow the instructions in my automatic signature. And tell me how you are going to use your 5 public addresses, i.e. whether you are going to assign them to some other de...

rabienz

Dear sindy,
i just want to thank you for your effort
my configuration worked

rabienz

Dear sindy, thank you for your reply i tried your method and the pc did not work after assigning a public ip to it i can ping to the mikrotik address which is the gateway here is my configuration /interface bridge add name=private-ip-lan protocol-mode=none add name=public-ip-lan protocol-mode=none /...

rabienz

Thank you sindy for the reply i also have /29 subnet that means 5 addresses i must use i want to be able to use them on a separate devices on LAN should i add each public address to interface and add it to the bridge? please if you can send step by step configuration in order to solve this confusion...

rabienz

dear sir i have same problem like najifares and my isp is the same one and gave me this email that is not clear at all now i have created pppoe connection and the rip settings as stated above but the problem the real ip i got is not mine and its dynamic and changes every time i connect i did ip add...

rabienz

dear sir i have same problem like najifares and my isp is the same one and gave me this email that is not clear at all now i have created pppoe connection and the rip settings as stated above but the problem the real ip i got is not mine and its dynamic and changes every time i connect i did ip addr...

rabienz

for info the problem is not only for accessing PBX i can't access any devices on lan via webadmin while i can ping them all example devices are : printer nvr ip phone the only device i can access via webadmin is the hp switch which i noticed that its http and not https even the mikrotik firewall its...

rabienz

thank you for reply
i already tried clearing cache and used many browsers but without success

on another note
vpn users are using the same subnet as lan

rabienz

any help ?

rabienz

Dear Guys, i have setup RB configured as VPN l2tp over ipsec and i connect to it normally from windows 10 client everything is working fine i can ping all devices on LAN normally my only problem is that i can't access my PBX web admin while i can ping its IP address i checked it on firewall connecti...

rabienz

Use the output chain in the mangle rules.

Can you help me please in doing this because when i set output i lose connection to winbox

Sent from my iPhone using Tapatalk

rabienz

Dear,
i have load balance to 2 wans
when i use tools or scripts from firewall it uses the distance=1 route gateway

how i can mark the firewall itself to use specific Wan regardless the route distance

thank you in advance

rabienz

me too can't where to do it

rabienz

I will study the case of putting mikrotik before fortigate but i have issue that i have 2 fortigate ha and 2 switches stackable for redundancy so in this case i need 2 mikrotik to keep redundancy

Thank you in advance

rabienz

So what you are saying is to remove mikrotik from between modem-fortigate and put it in between fortigate-switch right ?

If this is the case my question is there is any chance to do it as my first scenario?

Thank you in advance

rabienz

Dear Experts, i have fortigate firewall connected to internet modem with public ip address i want to install mikrotik as bridge in between so i can get all logs and connections i installed the bridge port1 to modem and port2 to fortigate and everything worked good and i see the connections passing t...

rabienz

No i am not
What hotspot is used for ?

rabienz

i have the same problem any solution to this ?
thank you in advance

rabienz

So why under system/license i have level 4 ?

rabienz

Dear Guys i have 2 sxt lite5 ac and i am connecting them as ptp via the 5ghz wlan2 while on the client side i have the second wlan card which is 2.4 GHZ and i want to set it up as ap to server multiple clients it won't let me do it due to license error 6 on the other hand i checked the system / lice...

rabienz

did you ever fixed that problem because i have similar problem ?

rabienz

Dear Guys, i have 2 WAN connection with basic failover setup without mangle rules here is the routing setup /ip route add check-gateway=ping distance=1 gateway=194.126.15.x add check-gateway=ping distance=2 gateway=212.28.240.x add distance=1 dst-address=10.0.0.0/24 gateway=ether1-LAN add distance=1...

rabienz

yes i am the only one
and i don't have log to disk

rabienz

no one interested in my post ?
any advice ?

rabienz

Dear All i have a problem after updating to 6.34 (2016-Jan-29 10:25) on ccr1036-12G-4S the problem is suddenly after update i noticed that i don't have link on one of my interfaces and after troubleshooting i found that the interface has been changed to sfp3 it was ether5 and it changed to sfp i cha...

rabienz

Hello sorry for late reply i applied the settings you gave me and all worked smooth as needed tests connected to vlan 2 can ping 192.168.2.1 and 192.168.15.1 and vice versa but it can't ping users on vlan 15 also it can ping 8.8.8.8 now how i can let vlans communicate to each others ? as well the mi...

rabienz

any help guys ?

rabienz

here what i did so far and all worked good for vlans except 2 things 1- there is no internet connections on all vlans 2- if i connect to ssid 1 i can ping 192.168.15.1 and 192.168.2.1 and 192.168.1.1 and same if i connect to ssid 2 ( which i don't want ) here is my code /interface ethernet set [ fin...

rabienz

no i have only one ap but i used 2 ssid on it using 2 vlan id
the problem happening when i removed the bridge is that i can't see the wifi ssids on clients at all
and not a problem of connecting the controller

see this diagram so you can understand me well

Untitled.png

rabienz

lets say we exclude bridge mode for modems idea
lets assume i used different range of ips on modems
can we do best practice for this
assuming modem 1 ip is 192.168.1.1
modem 2 ip 192.168.2.1

and vlan 10 192.168.10.0/24
vlan 20 192.168.20.0/24

is that what you suggest ?

thank you in advance

rabienz

Dear Sir i did what you said about but something is going wrong the wifi is not showing anymore i am plugging the wifi ap to ether3 is that correct ? here is the code /export compact hide-sensitive # jan/02/1970 00:08:45 by RouterOS 6.33rc22 # software id = LRHK-XD60 # /interface vlan add interface=...

rabienz

forgot to say i put unifi ap on port 3 and port 4 is used to controller for unifi

rabienz

[admin@MikroTik] > /export compact hide-sensitive # jan/02/1970 00:59:09 by RouterOS 6.33rc22 # software id = LRHK-XD60 # /interface bridge add name="bridge trunk" /interface vlan add interface="bridge trunk" l2mtu=1518 name=vlan2 vlan-id=2 add interface="bridge trunk"...

rabienz

yeah you are right what i am missing is doing routing between vlans and wans
while i can do it is was normal Ethernet and not vlan

rabienz

thank you for your reply but it seems you misunderstood me i read your pdf file but i don't want load balancing or failover or pcc i just want 2 separate networks with 2 ssids that connect to isp1 and isp2 what exactly i want is when i connect to ssid 1 i must use wan 1 and when i connect to ssid 2 ...

rabienz

Dear Guys i have routerboard RB493 and unifi UAP and 2 modems from different isp what i am trying to get is to have 2 ssid on unifi each one is separate and connect to specific wan ssid 1 can connect to wan 1 ssid 2 can connect to wan 2 wan 1 modem conf is 192.168.2.254 wan 2 modem conf is 192.168.1...

rabienz

any help guys ?
thank you in advance

rabienz

any help is being appreciated
thank you guys

rabienz

Dear Guys I am using CCR1036 for 3 wan and 1 lan My problem is from the terminal when i /ping 8.8.8.8 interface=ether2-WAN1 or ether2-WAN2 i got reply while if i /ping 8.8.8.8 interface=ether2-WAN3 ping request time out. the reason for doing this ping is to make a script that test the internet on ea...

rabienz

any help from anyone ?
thank you in advance

rabienz

i need this situation also if someone can help

rabienz

Dear Guys, i have CCR1036 i have 3 wan from different isp and i am planning to install the forth i have set the configuration in mangle and NAT check the below code Mangle /ip firewall mangle add action=mark-connection chain=input in-interface=ether2-TerraNet \ new-connection-mark=WAN-TerraNet add a...

Search found 48 matches