MikroTik

danielillu

Hi! I am testing usermanager v7.13.5 to replace an older v6 UM. In UsermanV6, the hotspot receives, for each active user, the relevant data from the userman to set the "Session Time Left" field and hence, disconnect the user when it runs out of session time: Captura de pantalla 2024-02-23 ...

danielillu

Hello, I'm trying to enable 5 and 10 mhz channels on Netmetal 5 devices and it looks like it is not possible: ## Netmetal 5 - RB921UAGS-5SHPacD ( AR9882 ) /interface wireless info> allowed-channels country=spain band=5ghz-a channel-width=5mhz interface: wlan1 channels: ## RB433 + Ubiquiti SR5 ( AR54...

danielillu

I am having trouble when trying to set channels width of 5 and 10mhz on NetMetal5 (A9882 chipset). I can only set channel widths of 20, 40 and 80 Mhz (a/n/ac, n/ac, ac).

danielillu

I have noticed that there are some minor changes on the console syntax, at least on the NTP Client settings. 6.20: /system ntp client set enabled=yes It works. 6.22: /system ntp client set enabled=yes failure: IP address of NTP server is missing Now I cannot enable the NTP service without defining a...

danielillu

Hello,
First steps would be understand MPLS/VPLS and know what you expect. For the implementation part, having all your MPLS-wannabe network fully routed will be helpful.

We can talk in private about it, if you want (skype, for example)

danielillu

you can try adding your servers' networks to the discovery list. It will force a service discovery for all devices on the specified network and will add the new probe.

keep in mind that it will also re-add all the probes you removed from a specific device.

danielillu

We can also make something like this - 1. click any rule or item 2. click "lock" icon 3. removing of rule now impossible, shows "item locked" 4. click "unlock" to modify this item Is anybody else interested in such functionality? lock.jpg That would be perfect! What I ...

danielillu

Unfortunately there is no IDE settings in Dell PowerEdge R210 II. There is AHCI, ATA and RAID. As far as I know there is no RAID support in RouterOS. The name you are looking for your SATA Setting is " ATA ", which you indicated your Dell R210ii has. if you absolutely need a RAID setup th...

danielillu

Try not to use CoD on your routers. It worked for me.

danielillu

Hello, I've been on the same trouble for almost a year using a 493AH, that I tried to replace with a 493G with no success (instead it went worse, so I reinstalled the 493AH). On the other end I had 3 RB433AH. No matter in which port 2-7 I had them connected. I also installed new cabling from the sam...

danielillu

The field "Name" which identify any "PPP -> Profile" and "Hotspot -> User Profile" matches de "Group Name" field in Usermanager. When any usermanager user has this field filled and tries to login via any service (PPPoE or Hotspot in this case) the Mikrotik Box...

danielillu

Could you explain how did you installed the intermediate certificate?

Is it installed just like the server-side certificate?

danielillu

In a mikrotik-only network like the one eflanery showed:

Does OSPF and MPLS LDP works well?

danielillu

I've been using a Mac for three years now and I can confirm the answers given above. Winbox runs well under Darwine/Crossover except for the files' copy/paste & drag'n'drop. Some times it goes mad with winbox-terminal and MAC connectivity butfor the latter I think is as frequent as under windows...

danielillu

Same problem here in spain. I've been waiting for RB1100 since July. Then there was no hurry. Now it is becoming more urgent so I thought about using temporary an RB450G or RB493AH but... there are also no units in stock. Hope Mikroitk providers solve their problems fast so we can have our boards so...

danielillu

I'm using it under Crossover for Mac (darWine was a bit annopying with a lot of useless terminal windows opening every time).

It does not work well when testing full duplex but it does the trick most of the time.

danielillu

Hi there, If I understand what you are trying to do, I'll tell what I'd do. If I'm correct, ports 1-5 and 6-10 can be connected as a switch. What I'd do is: - set up ether1 the master port for ether2-5. - set up ether6 the master port for ether7-10. Now, you will only "see" traffic countin...

danielillu

Same here using v4.10/4.11 RB433AH + SR71A (2ghz@g-only, 2 chains active).

danielillu

There are many M2 with that same problem to burn'em all. Too much coincidence six of my customers are trying to make man in the middle attacks. I add that I've just discovered another UBNT M2 that behaves like the others that is connected to a RouterOS 3.30. I'm starting to suspect that is UBNT's fa...

danielillu

Hello everyone, I have a network with some 802.11B/G Mikrotik Hotspots using different ROS versions (3.22, 3.30, 4.06, 4.10, 4.11). Most of my current clients are using UBNT Nanostation 2. They are cheap, easy to install and robust. Now I've just started using Nanostation M2 (the new ones with MIMO,...

danielillu

Same problem here. I have a very short link that can only be used at 802.11A with both chains active because when using 11N it announces very low CCQs and signal jump 20dBi. I bought that link as soon as my distributor had R52HN in stock. Maybe there were many defective units then? I think you gave ...

danielillu

I've noticed same problem when using 3.5, 3.6 anb 4.0b1. Also under 3.4 but intermitently. I started monitoring links using routeros connection and it only updated data once or twice. Then I moved to SNMPv3 (MD5, SHA, security=private) and labels never got updated or label showed InInterfaceBitrate....

danielillu

I installed an almost fresh Dude 4 beta (I told the installer to remove older data) and after setting up 3 maps, 10 charts and a 9-chart panel, now I cannot use it :( I open Dude, tries to connect to 127.0.0.1, it starts loading the interface and get stuck in there at 100% cpu usage. After a while t...

danielillu

Hello, I read this thread because I'm setting up a new .11N link and was afraid of some unstabilities when using nstreme and/or wds. My link have the following specs: - 2x RB600A - 2x R52Hn - 2x JRC-24Duplex (dual polarity) - 2.66km long with LOS. - both chains for TX&RX. Today I powered everyth...

danielillu

Hi, I'm testing a new setup and trying to monitor tests using a fresh dude: RB450 with all ethernets bridged. ether1 is connected to a 10mbps line. bridgeFilter+queues to shape bandwidth to/from ether1 to ether5@4mbps (max 5) and ether4@6mbps (max 7). ether4 has a w2003r2 acting as dude server &...

danielillu

Dear, On my network I'm using a bunch of routerboards with 802.11B/G cards to distribute service to my customers. Most (if not all) of those distribution nodes are fixed at 802.11B. Today I started setting up one to 802.11G-only in order to get more theoretical bandwidth. In that moment I had 4 clie...

danielillu

Pop!
It is not a defective drive. I've just RMA'd the first one and I got a new one, that it is performing well under windows.

And I can't still install it via USB.

Tonight I'll try by network.

danielillu

I'm facing a similar issue but using a 8GB Kingston Elite Pro Compact Flash.

I cannot install RouterOS by network nor by USB.

I tried 3 different card readers, 2 different host operating systems, 2 different target computers and 2 different pieces of CF (same model).

danielillu

Free with full source

Nice! I can't wait that moment

danielillu

Hi Danielillu,

where are you working? I'm from BCN too.

I'm working at TGNWifi, maybe a member of your company met my boss at Madrid Training late-2007 or early-2008.

danielillu

oh, GREAT!!!

Now I'll take advantage of my old HP iPaq 2490! How are you planning to release this pice of gold?

danielillu

Hello, I want to know if my idea is possible. Is is possible to install mikrotik in a dedicated server (on a $39/month datacenter) and configure my RB450 to bond three ADSL lines (1M/512K) to get a 3M/1.5M link...could it work?? I was thinking is a VPN with bonding, will it be the best way to do th...

danielillu

What I'd do is: Connect ether1 to internet. Here you'll have your public IP. Connect ProdServer to ether2 and make sure it is full available to internet, as it was your only server. Make sure everything is working for ProdServer. Add TestServer, to ether3, or ether2 with a switch, or whatever. (I'd ...

danielillu

Maybe it is a defective drive.

After all those tests I tried again on my computer and it randomly fails to format or hangs my MacOS X when writing a lot of data.

danielillu

Hello, I tried three different USB N-in-1 card readers using two different computers and operating systems, and none of them worked. I select the correct drive, then click "Install" and it says for less than a second: "Partitioning and formating drive", and then: "Installati...

danielillu

We install RB very close to the antenna. UPS for 230 sometimes crash, then we use the AD-55 or AD-155 - http://tandem.ck.ua/ups_mt-eng.php. Monitoring food http://tandem.ck.ua/ups_mtm-eng.php. UPS-MT-monitor can also control the power, if RB411 (433) does not want to respond (hangs). Nice and neat ...

danielillu

Pop!

Anyone?

danielillu

HEllo,

I set BIOS to default values and I'm still unable to netinstall RouterOS 3.30 nor 4.2.

I cannot know why is it failing again and again. Any idea?

Anyone know which filesystem has to have the CF in order to install using a card reader?

danielillu

Hello, I'm trying to install a new RouterOS over a 8GB Kingston Compact Flash and I'm failing again and again. I tried Compact Flash in two different computers (a SiS900 chipset computer and a many times net-installed asus p4b board) several times using Netinstall 4.2 and netinstall 3.30 connecting ...

danielillu

I suffered that problem a couple of times using versions prior to 3.22. Contact Mikrotik support attaching a supout file, explain the problem and they may will recover your database. Then import again using a recent Usermanager (3.22 and up). I detected this happened when a <3.22 UserManager was imp...

danielillu

I'm planning to set up 5-8 routerOS metarouters in a 493UAH for building up a big PPPoE "dialer": each metarouter just dial pppoe, NAT the outgoing traffic and send it to its parent router using the vif bridge. I have a doubt about RouterOS License. RB493 comes with Level 4 license. What I...

danielillu

Hello, A new customer has asked us to give full coverage at his campsite (1000x500m aprox). I've thought setting each node about three meter high using small omni antennas to reach de area at head level, in order to be able to connect using regular notebooks (no CPE needed). Each node set at about 1...

danielillu

I faced that too. What I do is to parse the raw strings to replace \0 and <cr> by <cr><lf> and also remove some other "non-text" chars it sends. I have a really preliminar home-made telnet version working. Now I'm tidying up the classes in order to make it scalable for a future SSH version...

danielillu

Thanks!
Now it's easier to get the results. I still get some control chars but it's easier to process the results.

danielillu

Hello, I'm programming a terminal parser for doing some specific tasks without winbox/terminal but I found that I have to remove all the colouring syntax in order to get it "visible", because I won't use colouring. How can I disable syntax highlighting for the current terminal/telnet/ssh s...

danielillu

E-mail feature must be configured under winbox -> system -> e-mail (or similar path under terminal). You need a SMTP server that doesn't require authentication for forwarding (sending) e-mails using it. I think there are still some on the internet, but I don't know a reliable one. I set up mine on m...

danielillu

Hi, I tried on the two computers I had available. Both were running from CF so they were correctly configured. I set up everything on "AUTO" but didn't work. As I told, BIOS error stands for: "Primary master disk fail". I tried also on primary slave and then stated "Primarry...

danielillu

Nah, Lost forever.

During POST appears:
- "Primary master drive fail"

What should I do?

danielillu

Hi, I have a spare Level 5 compact flash I recovered from a fried board. One I recovered it, it booted correctly, so I installed in there some now old RouterOS version and stored it. Today I was messing around to mount a lab-machine to test some features using that card but I didn't boot. I tried ne...

danielillu

Hi, What you need to do is to specify in all your routers from internet public gateway to your client's nearest node, routes to your public-ip addresses or sub-pools. To try if it is working, and how are you doing the route-setting, use traceroute to any internet ip from your client (or any other pu...

danielillu

I didn't tried it.
I'll try in an hour or so, to let all clients going to sleep and leave their p2p apps running alone.

danielillu

Hello to everyone, My user-manager - coreRouter all this morning had been suffering of micro-Powerdowns ( I think UPS is almost died). A few hours later I detected that I couldn't login, get routed through it or event ping it from anywhere. I hard rebooted it and I had these entries on log (in bold ...

danielillu

I'm jut now upgrading about 10 routerboards from 2.9.x to 2.9.51 and then to 3.7 and no issues now. Just I have some trangre behaviour with bridged interfaces acting as route after upgrading a loadbalancer 2.9.51 to 3.7 (I think because of a new behaviour of v3 bridges, I'm reacconditioning setups t...

danielillu

Hi to everyone, I've just installed a VDSL switch in a hotspot ethernet port. This switch can be managed through web, but I cannot access to it because it is behind the hotspot. How can I "free" access to vdsl's IP in order to acess to it from my management computer, while maintaining the ...

danielillu

I know that bridging part of the network and having all PPPoE in the same place is a possible option, but I don't rely on a computer in the comm-tower (long power outages are common, hot temps in a closed room, vandals, thieves...). I prefer to descentralize network paying some performance for it an...

danielillu

I left it using hotspot because of difference of opinions. I prefered a mixed solution Hotspot+PPPoE but my boss prefered only hotspot yes or yes, so there's still hotspot only. In a few months I'll start my campaign again for new setups, taking advantage of new 333 boards, which I hope they support...

danielillu

I've tried with a Siemens C55 phone and haven't succeeded on a rb532. I'm able to send SMS using this phone and standard AT commands (using PDU SMS format). So or the option isn't working correctly, or there's "something" untold behind it. It also has strange behaviour when using "TAB...

danielillu

I've also noticed this behaviour. I prefer old style (v2.9) dns resolution directly from address field. When a hostname was entered, it automatically was resolved. It could be perfect if address fields could store hostnames not IP Adresses. For example NTP client, mangle dst-address, even static rou...

danielillu

When I open a standard size rc10 terminal from winbox 2.2.11, and then I maximise it (using 1280*1024 screen resolution) prompt line gets faulty and has strange behaviour. Prompt doesn't update its position, as you can see in the attached image. When I close this terminal, and open a new one, termin...

danielillu

I've done a reset-configuration and set up a really basic configuration (PPPoE client, NAT, and LAN IP address) and everything is working.
Now I have to readd all filters, mangle, queues and dns server/cache.

I'm really surprised with this error.

danielillu

check your mtu and mru setting for your pppoe connection. try a lower value like 1452 I had default values (MTU = MRU = 1480) that were working till sunday. I've tried 1452 as suggested but didn't affect behaviour. I still only access Google services. I've an an autosupout file from sunday night. I...

danielillu

oh!
I forgot to say: when connecting any of the computers 'directly' to isp bridge and stablishing pppoe connection on the computer, everything is correct.
so it doesn't seem to be an isp issue.
when routerboard is removed everything works correctly.

danielillu

I've also seen this on v3. When using 20Mhz channels, wireless Frequency list always shows 5Mhz steps, instead the usual 20Mhz step like v2.9.

danielillu

Hello, Since sunday, my testing rb532 router is doing weird things. I was running rc9 with some L7 mangle rules and some queues getting WAN connection from a PPPoE DSL line and doing NAT. Traffic on the network for its last 3 days was emule+bittorrent traffic, and some RDP, web and messanging. It ac...

danielillu

Hi to everyone, I've recently done some big changes in my network. I moved from one big bridged scenario with 6 distribution nodes, to a routed scenario with 8 different network segments. Everything is working seamlessly from clients point of view (better than before), but it is not the same for me....

danielillu

ok, I hope I understand you right, the rule was changed to: > ip firewall filter print Flags: X - disabled, I - invalid, D - dynamic 0 chain=forward action=drop protocol=tcp connection-limit=16,32 now each user can only establish 15 simultaneous tcp-connections is that right? Thats right but this a...

danielillu

I've seen, using UserManager RC5, that when adding Batch users, the username is quite weird, as you can see (creating 3 vouchers). VoucherPrefix-zzngn VoucherPrefix-4dzct VoucherPrefix-6zjxx Could be possible to change that behaviour to instead of random username strings, have sequential usernames, ...

danielillu

Thanks! That was rigth what I needed.

danielillu

I'm moving to User Manager from a hotspot system that allowed me to set "account activation" to its first login/right now/at given time. What I used most was first login. So I could create 100 batch accounts with credit 1week and 10 hours of uptime, and the 1 week period started counting w...

danielillu

Hi!

Is there a restriction about free licences?
I mean, it is a free licence per article, or one free licence per user, even he writes one or 20 useful articles?.

danielillu

a.) The comment field be added in the UM web interface or, b.) A new field for invoices (or something similar) be made, and simply displayed (uneditable, perhaps) in web interface? I'm agree with both requests, specially first one. Why we want comments in UM -> Users if we cannot edit them through ...

danielillu

I'm trying to disable a ppp-client I use to send some commands through serial port. I'm able to send commands succesfully with the ppp-client when enabled+disabled manually. Now I'm trying to script it but I can't disable interface 1s after enabling it. add name="Send_code1" policy=ftp,rea...

danielillu

I've just added a new topic under "Mikrotik RouterOS -> Your basic questions are answered here", called Initial MAC Winbox Connection (direct url: http://wiki.mikrotik.com/wiki/Initial_MAC_Winbox_Connection) Is a small HowTo about how to connect to Winbox using MAC Connection. Thanks Janis...

danielillu

I've seen these new features but I can't find what they mean:
*) added /system default-configuration;
*) ability to reset without applying default configuration;

Could anyone explain them?

danielillu

Perhaps everyone should specify if they use UM for WISP or HOTSPOT so the Programmers can get an idea of which group needs which features.

I'm testing UM to work on both scenarios simultaneously, as WISP with my fixed clients and as Hotspot for one-time users.
Both options don't exclude each other.

danielillu

Asterisk box is "untouchable", because it isn't strictly in my network; it's owned and administrated by a partner that let me use it. So this option, as it sounds pretty nice, cannot be tried. You can try adding a routing mark as the action to packets aimed at asterisk network, from the pu...

danielillu

As you can read on the net ( Kingston Flash Memory Guide Page 4 ), Modern flash units has a typical write/erase cycle of 10000 writes per sector. If we suppose that free disk space has remained more or less constant over the time, you have written every time over the same sectors (maybe about 1MByte...

danielillu

I have a RB532 with 4 radio+ether1 bridged all together on one side (Tower), and a RB532, with 2 radio+ether1 bridged too (Base). The Tower is connected to Base with a WDS on 5Ghz (SR5 on both sides). All radios (except the SR5 with the WDS) Now, Tower receives a Broadband line through ether2, and I...

danielillu

Maybe CF is just "running out of life", I mean, it's reaching his write limit per sector, and it's behaving that strange. To make sure there are no HW problems, I agree you should test HW with some kind of "standard" OS, like Windows XP or Linux, an run some stability tests (MemT...

danielillu

When you apply settings to wireless interface, all wireless connections are disconnected and reconected, somewhat like a radio reset. So remote connection is lost. Also, if what you have changed is the security profile, radio link won't be restablished until you've set the same sec. profile in both ...

danielillu

From User Manager - Active Sessions : When a session is started it's state is active. It can become inactive in one of the following ways: User Manager receives accounting-stop message; [...]If the router hasn't sent accounting-stop message the session may remain active even if it's closed already l...

danielillu

I've just discovered that you can use de Pool name field to avoid multiple logins (Added: from multiple places). You only need to set different name to each pool you use in your nodes ex: - node A Hotspot: poolA - node B Hotspot: poolB an so on. It also works if you use PPPoE and assign Remote IPs b...

danielillu

I've donwloaded intel/amd separate packae and can't be net-installed beause packae System is missin in te download packae.

PS: Sorry for bad typin, keyboard doesn't work well

danielillu

Thanls springwifi, but the download link you provided doesn't work, now. Maybe is a temporal error

danielillu

When logged in through Winbox, you can set a new password without having to type the old one, going to: Users -> [double click] Username -> Password. There, type the new password twice, and that's all. I'd better create a new Full user with simple credentials (like, username: demo password: demo ) t...

danielillu

How I wanted to have some programming skills to do an app like that.
Could you send me a copy: " danielillu [at] hotmail dot com "

Many thanks!

danielillu

I had same problems on a rb532. I solved disabling calea and dude packages. Seems they don't work so well on rc2 and rc3. after installing the dude package and also after each reboot with the dude package enabled the rouer could have 100% usage for few minuttes, because it is building the snmp mibs...

danielillu

I had same problems on a rb532. I solved disabling calea and dude packages.
Seems they don't work so well on rc2 and rc3.

danielillu

Main steps for setting up a basic & working hotspot are: Set a working DHCP: - add a pool with the desired IP range for DHCP. - add a dhcp -> network which match the pool settings. - add a dhcp -> server which uses the pool created, and bound to the interface which will host the hotspot. Test DH...

danielillu

Thanks bushy. I'm trying to do that: mark everything interesting and send it through the HiBW line and let bulk traffic go through a LowBW line. But not only p2p soft stablish many connections. Any browser stablish some HTTP connections (marked with content=HTTP/1.1) but also many data connections n...

danielillu

Standard procedures to do a Winbox MAC connection is so easy as soon as you know how to set a static IP in your windows/linux machine. If you don't have that knowledge, you won't be able to connect and what's more, you sure you don't need a RouterOS machine at all. If you are using a Routerboard boa...

danielillu

Can someone drop a light on this?

danielillu

Hi to every one. I'm trying to load balance my wisp, sending all p2p traffic to a low bandwidth line and send all "interesting things" through a higher bandwidth one. But I've found a big problem when doing some testing with emule as p2p client. when emule is loaded, it stablish by default...

danielillu

Hi, I'm running a WISP with wireless (802.11b) distribution based on bridged rb532 boards (4 with client dist and backbone conn, 2 with only distribution and 2 for only backbone) about and a concrete and not-very-well-supported-and-stable software for clients AAA, bandwidth throtling and so on. Now,...

danielillu

Maybe Hotspot profile -> "Trial" will do the job.
I haven't tried

danielillu

Two feature requests: Double condition to disable accounts: - When uptime expires - When has passed X period (1w, 1d, 1m) sincs user first login or account creation. Plans/user profiles. Create user profiles for, when adding a user, just selecting the correct profile all values become set by default...

danielillu

I was connected to central rb532 through ethernet, and slaves rb532 where connected "wireless" using sr5. bandwidth test was running from a computer sending packets to the 3 slaves. two of them were so fast (~40mbps each) but third one was slower (~10mbps). I supposed 90mbps was a hard lim...

danielillu

I've bridged ~90Mbps through routerboard + 4 Sr5@5dBm in lab environment (with no conn tracking), and I think 90mbps is its hard limit because 3rd btest was slower and more unstable than the other two (no matter which test I set first), and also, built-in ethernet are 100mbps. On my test I used the ...

danielillu

Thanks to everyone with your comments and that url. I'll get rb532 only, then, I'll go for sure devices. If its true (what I don't put in doubt) what you and that url says, I agree all of you about why they released that configration. as all advantatges of having 3 miniPCI and 5 Ethernet on board go...

danielillu

I'm going to install a backbone node with 3 SR5 (2 of them at about half or third of max power) and other one with 2 sr5+ sr2 (sr5 at less than max power) but my provider doesn't have RB532 stock, and I thought about using RB153 as they have 3 MiniPCI on board and I can get them in a couple of days,...

danielillu

ok. after some testings I've found what I exactly needs but I don't know how to solve it. I open a new thread about that, will be better.

danielillu

so there's no way of once RouterOS is installed to revoer them without downloading again (if avaliable). isn't it? I have some OEM locked RB (rOS 2.9.5, 2.9.7, 2.9.30 updatables upto 2.9.30 from its manufacturer)and I want to standarize them (just netinstall new mikrotik npks) but still have the cha...

danielillu

I have a RB with older ROS versions (2.9.5, 2.9.7 and not yet too old 2.9.30) and i want all of them have the same actual version. How can I "recover" packages from routerboard once they are installed? I want to have a full installed & configured backup just in case something goes wron...

danielillu

how do you add all these huge amount of lines?
one at a time? :S or there is any faster method I don't know?

danielillu

I think yes, a couple of MT boxes are needed. Regarding to what examples show. You are right, sorry.

I'll do some testings next weeks using a MT box and some "standard" hardware (also i'll test using 2 MT) to get a backup system working.

danielillu

I've set a pcq queue type for upload UL (classified by Src. address) and other one for download DL (Classified by Dst Address). My internet connection is a 4M symmetric WiMAX Link. as normis says, I'm using PCQ queues, so all traffic will be limited per IP. Most of my problems are on VoIP. because f...

danielillu

this diference could be because in the 2.x ghz band there are (usually) more interferences than in the 5.x ghz and this slows down the link.
always (if its technical, legal and many others possible) is better to have such ptp links in a band less crowded.

danielillu

anyone?

danielillu

If you have 1 MT box with 2 internet connections and want to use one of them as backup or distribute load over the 2 lines, you should try Bonding.
you can add one under /interface, do add bonding (or use winbox, instead)

danielillu

I think kschaefer refers to lists of typical "malware addresses" (usually from china) to ban them directly at external routers, preventing then any intent to establish a comunication to that addresses. But I don't know any place to start searching. yo could try looking for p2p banned ip li...

danielillu

Hi to everyone! I've set some queues to limit bandwidth for diferent kind of mangled traffic {http, ftp, smtp, pop, dns, https} {VoIP}, {control: means trafic from APs IP and server IP}, p2p (mikrotik p2p identified traffic), other (traffic not directly known). each queue tree will limit traffic goi...

Search found 111 matches