Community discussions

MikroTik App

Search found 10 matches

by Calrion
Wed Oct 28, 2009 8:56 am
Forum: General
Topic: v4.2 released
Replies: 33
Views: 12177

Re: v4.2 released

"not work" how? please explain in detail Sorry, you're right, I should've expanded that! :) MetaROUTERs fail to both start and shutdown, seeming to hang mid-way through. Occasionally I've seen ~40 lines worth of errors on the MR's console, but haven't managed to capture this yet—think the...
by Calrion
Wed Oct 28, 2009 6:54 am
Forum: General
Topic: v4.2 released
Replies: 33
Views: 12177

Re: v4.2 released

After upgrading from 4.0rc1 to 4.2 on my RB433UAH, MetaROUTERs appear not to work anymore. This goes for both existing and new MetaROUTERs. :?

On the bright side, the Ethernet interfaces are now all working perfectly! :wink:
by Calrion
Tue Nov 11, 2008 5:39 am
Forum: General
Topic: RouterOS supported hardware
Replies: 29
Views: 26932

Re: RouterOS supported hardware

Just wanted to pop in here to mention the success I've had with HSDPA modems under RouterOS 3.14. I've been quite successfully (not surprising since it's mentioned in the wiki) using a Huawei E220 with ROS for my 'broadband' Internet connection for a while, but this morning my wife needed to borrow ...
by Calrion
Sat Oct 20, 2007 3:50 pm
Forum: General
Topic: Second and subsequent PPPoE connections fail
Replies: 11
Views: 2922

Re: Second and subsequent PPPoE connections fail

This post originally asked for a way to specify the session ID... Well I went back and read the RFC, and my bad, ROS is doing exactly what it's supposed to do (of course!). Turns out that the session ID MUST be 0 in the PADI, PADO and PADR packets. Next step is to sniff things and see if the AC ever...
by Calrion
Fri Oct 19, 2007 10:53 am
Forum: General
Topic: Second and subsequent PPPoE connections fail
Replies: 11
Views: 2922

Re: Second and subsequent PPPoE connections fail

Four phone lines would certainly be overkill, and the redundancy isn't really required as the connection hasn't had significant downtime since its inception (and a dial-up modem would be sufficient when it does). I could use multiple ethernet interfaces connected to the ADSL modem, but I'm hoping to...
by Calrion
Fri Oct 19, 2007 1:33 am
Forum: General
Topic: VMWare ESX Server
Replies: 10
Views: 2675

Re: VMWare ESX Server

I've had no issues running ROS 2.9.x on VMware Server for Windows, but I mostly use it for testing rather than production. Although I love VMware, I don't think I'd use it for MT in production unless I was using MT to protect the VMs from the LAN (or vice-versa).

It's definitely functional.
by Calrion
Fri Oct 19, 2007 1:26 am
Forum: General
Topic: Second and subsequent PPPoE connections fail
Replies: 11
Views: 2922

Re: Second and subsequent PPPoE connections fail

I am? Excellent! I guess this means the problem is at the AC, and not my end (and perhaps a result of the dreaded "by design"). Unfortunately, the AC is run either by my ISP or, worse luck, the incumbent telecommunications company. The trouble with this is--and also why I'd basically disco...
by Calrion
Thu Oct 18, 2007 4:14 pm
Forum: General
Topic: Second and subsequent PPPoE connections fail
Replies: 11
Views: 2922

Re: Second and subsequent PPPoE connections fail

Well, unfortunately (it's not the preferred outcome), I think I've solved the problem: you can't have two PPPoE connections between the same pair of MAC addresses. I've taken quite a few steps to troubleshoot this, including setting up a vanilla ROS box, and using Windows Vista to setup connections....
by Calrion
Tue Oct 16, 2007 3:09 am
Forum: General
Topic: Second and subsequent PPPoE connections fail
Replies: 11
Views: 2922

Re: Second and subsequent PPPoE connections fail

Ahh, fair enough. Ok, so I told ROS: add topics=pppoe,debug prefix="" action=memory system logging action And got the following when I enabled the second PPPoE connection, let it try to connect (and fail), then disabled it again: 09:20:30 pppoe,ppp,debug dsl-XXXXXXXXX-dyn2: PPP restart 09:...
by Calrion
Mon Oct 15, 2007 5:48 pm
Forum: General
Topic: Second and subsequent PPPoE connections fail
Replies: 11
Views: 2922

Second and subsequent PPPoE connections fail

After configuring multiple PPPoE connections to my ISP, the second and subsequent connection(s) always fail. It doesn't matter which I enable first; the first one always works, the others always fail. So, some facts: my MT box is behind an ADSL modem in bridge mode. I'm running ROS 2.9.38. My ISP pe...