MikroTik

Alex

Hello!
Please add possibility to use custom option 82 formats
We need option 82 format like cisco, zyxel, dlink, hp - we use it for client authorization

Alex

any chance to have dhcp snooping option 82 remote id and circuit id customization? we are using option 82 for client authorization on switch ports
we need remoteid=bridge/systemmac and circuitid=port number in hex

Alex

Hello!!!
Anybody have experiance with 3.10 and 100+ Mbps routing?
Now I have p4 3.0 Ghz 512 mb ram, 2 intel 1000 nics, 2.9.51, simple routing and setup like this. I want to upgrade, but I must be sure that 3.10 will not broke my setup and works stable.

Alex

connect to board via serial cable, log in and reset configuration.

Alex

And where did you seen it on RB333?

/system health print

Alex

any news about 3.8? changelog...etc

Alex

Alex

upgrade to latest version

Alex

with 333 and 5-turbo you can get 50+ Mbps half duplex

Alex

as far i know you can use cf rard only for proxy cache, but idea is not bad.MT developers could add this fetature in future releases. You can "find" your cf in ip proxy settings, option cache-drive.
Yes, ROS have shell - busybox, but it is avalaible only for MT developers

Alex

what version of ROS do you have?try latest

Alex

what is connected to rb from other side via ethernet? try to restart this device first.

Alex

strange thing: in latest versions of Ubiquiti RadioDriver is bug with dfs radar detect.Mikrotik have same bug from 3.2........

Alex

uninstall all unneeded packages

Alex

you have to do folowing steps:
/system routerboard settings
set cpu-frequency=399MHz
keep-frequency
Shutdown your board and do powercycle (turn off and on power)

Alex

you can change cpu speed in /system routerboard settings menu if you have routerboard package installed

Alex

from manual:

Many parameters from /interface wireless menu are ignored, using the nstreme2, except:

frequency-mode 
country 
antenna-gain 
tx-power 
tx-power-mode 
antenna-mode

Alex

answer is simple: connect to router via serial cable and you will se what`s wrong

Alex

I`ve got about real 25 mbps with 5Ghz and nstreme

Alex

you can always connect to board via serail cable...

Alex

try to lower tx power.uninstall all unneeded packages, install latest version, turn off connection tracking (if you are not using nat).and always do bandwitch test throught routers not from rb to rb

Alex

I had this issue too.resolved by disabling hiper treading in bios./system hardware multiplie cpu off.

Alex

max wireless speed of 133c (wds bridge w/o conn tracking)is 2 Mb/s (16 mbps)

Alex

may be you are talking about safe mode in routeros? ctrl+x

Alex

scenario of test was pc1--411~~~411-pc2.pc1 had freebsd+proftpd,pc2 was notebook with xp and total commander.

Alex

i have tested 411 too as wds bridges.At table with ROS 3.3 i`ve got stable 3 MB/s (24 mbps) with 5Ghz and around 5 Mb/s(40 bmps) one way with nstreme enabled.

Alex

for me pair of 133c with 2.9.50 have 2,2 MB/s real troughputpair of 532a have about 4 MB/s real troughput.it is simple wds bridges. do you use nstream on 133c? it have slow cpu.for high speed ptp links you need: 1) power boards like 333 or 600 or PC router with fast cpu. 2) stable signal 3) well con...

Alex · Re: Downgrade from 3.x to 2.9.50 system package downgrade

system package downgrade

Alex

a)/system backup load/save
b)/export

Alex

please send supout file to support@mikrotik.com

Alex

upgrade to 3.3

Alex

try to format nand and do netinstall

Alex

same problem in 3.3...waiting for solution.

Alex

install routerboard package to your rb.after that do /system routerboard upgrade and restart

Alex

I think I`ts just dude server.Now you need only client for dude...

Alex

Routerboard 532, cm9.same issue and same solution.
CPU utilization was 100 % constantly, i had no time to check on which frequency it is running.supout sent to support

Alex

/log print

Alex

with rc13 and 333 i`ve got 60 mbps udp half duplex and 50 mbps tcp half duplex.nsteme,exact size, 5-turbo, wds bridge
with 3.2 and 411 i`ve got around 30 mbps.5ghz, nstreme, exact size, wds bridge.with turbo i`v got REAL 53 mbps.

Alex

post your wireless settings

Alex

try to connect to board via serial cable and check what is wrong.

Alex

what packages are installed?try to remove unneeded.if you dont use nat, disable connection tracking.try to do /system check-installation. have you tryed reset config?

Alex

i uptated rb133c to 3.1 from 2.9.50 and wireless interface disappeared.system resource said that nic is present in system. after reboot card returned to list

Alex

Config from AP /interface wireless set 0 ack-timeout=dynamic adaptive-noise-immunity=yes allow-sharedkey=no \ antenna-gain=0 antenna-mode=ant-a area="" arp=enabled band=5ghz-turbo \ basic-rates-a/g=6Mbps basic-rates-b=1Mbps burst-time=disabled comment="" \ compression=no country=...

Alex

or you can set frequency mode=superchannel and country=no_country_set in wireless config and you will be able to use any supported frequency.Your license must be with extra-channel option.And dont forget add selected freq to scanlist option.

Alex

as i wroted somewhere here, with 333 and rc10 i`ve got around 55 Mbps real bandwitch.config was 5-turbo, nstreme, exact size, w/o connection tracking,wds bridge.after that i uprgaded link to 3.0 and got only 40 mbps. after that i downgraded to rc10 and all works fine. i can`t do supout because it is...

Alex

may be you have soft reset jumper (jp3) installed?

Alex

have you tried routeting-test package with 2.9.50?

Alex

i think mikrotik will make 64 bit version of routeros when it makes routerboard with 64 bit processor

Alex

http://wiki.mikrotik.com/wiki/MPLSVPLS

Alex

may be a-l-i-e-n talk about element witch is under hole?zoom is cool thing

Alex

you can try to upgrade your bios first

Alex

When i download latest winbox from demo2.mt.lv kaspersky antivirus shows this:

Alex

rc11(demo2.mt.lv) winbox terminal is buggy too

Alex

i`m doing tests now.2xrb333 with rc10.one radio per unit, tubro with nstreme,exact size.connection tracking ,bandwitch server and mac server are disabled.simle wds bridge setup. Scenario: PC1-rb333~~~~~rb333-pc2 with ftp server Results: 50-55 mbps (6-6.5 MB/s) with ftp transfer and up to 75 mbps hal...

Alex

532r5 - same problem

Alex

you cant change cpu speed on a lot of the boards can you ? the new r532 board is 400mhz so i assume its not available on that one.

I have 532r5 with 2.9.48 and I`m able to change speed of this board.

Alex

I have this bug on rb532 with RC9

Alex

do /system chek-install

Alex

import export commands in terminal?

Alex · Re: 3.0rc7 ?? ok.I`m reading future what is wireless-crd package in 2.9.48?

ok.I`m reading future

what is wireless-crd package in 2.9.48?

Alex

when system and ntp packages are installed, in winbox in system menu is 2 ntp clients

and from changelog:
*) added simple SNTP client to system package
& removed regular ntp from bundle package;
what is sntp? it is smtp or ntp?

Alex

on demo2.mt.lv now is rc6.from demo2 router when opening console in winbox: MMM MMM KKK TTTTTTTTTTT KKK MMMM MMMM KKK TTTTTTTTTTT KKK MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK KKK MMM MM MMM III KKKKK RRR RRR OOO OOO TTT III KKKKK MMM MMM III KKK KKK RRRRRR OOO OOO TTT III KKK KKK MMM MMM I...

Alex

question about mangle.for my scenario i need to divide local/overseas traffic for each bandwitch profile?can it be combined with pcq?

Alex

manual request I need scenario for this situation.I have real ip adresses. No nat. 3 bandwitch profiles - 1. local traffic: download 12m/ Upload 6m overseas 256/128kbit. 2. local traffic: download 6m/ Upload 3m overseas 128/64kbit. 3. local traffic: download 4m/ Upload 2m overseas 64/32kbit. I have ...

Alex

manual request :) I need scenario for this situation.I have real ip adresses. No nat. 3 bandwitch profiles - 1. local traffic: download 12m/ Upload 6m overseas 256/128kbit. 2. local traffic: download 6m/ Upload 3m overseas 128/64kbit. 3. local traffic: download 4m/ Upload 2m overseas 64/32kbit. I ha...

Alex

try netinstall

Alex

do netinstall

Alex

do you have wireless package installed on your board?

Alex

graphs of cpu usage, free ram, traffic(mbps,kps). signal strenght.ability to show own logo.

Alex

Alex

2.9.46
[admin@MikroTik] > :foreach i in=[/ip arp find interface=inet] do={/ip arp set $
i interface=local}
already have mapping for this IP

Alex

I have 420 arp etries with incorrect interface name. I want to change it. but how?As i know it is possible with :foreach command. script :foreach I in=[/ip arp print] do={/ip arp set $I interface=correctinterface} doesnt work

Alex

it is possible.I have many p2p wds links

Alex

screen loads very fast.I have 100 mbps fiber link.

Alex

when you open in winbox new window fields are grey and you cannot change value.maybe this is because demo user have small access, but i had this bug in some beta...

Alex

some time on demo2 router is installed rc2.bug with unchangeble value in winbox is not fixed.from winbox terminal: [demo@demo2.mt.lv] > ed, using multiline input mode MMM MMM KKK TTTTTTTTTTT KKK MMMM MMMM KKK TTTTTTTTTTT KKK MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK KKK MMM MM MMM III KKKKK...

Alex

routeros for powerpc based boards is not released yetv

Alex

set country to no_country_set

Alex

What's new in 3.0rc1: *) enable routing package on upgrade - to fix upgrade from 2.9 version where routing-test package was used; *) console - parser now accepts newlines as CR, LF, CR+LF, this fixes import; *) user manager - using +/- image for group field show/hide instead of confusing checkbox; *...

Alex

on demo2.mt.lv - beta11 same problem with terminal in latest winbox

Alex

I have strange bug in winbox.for example, I go to system -> ntp server.I see all setting, but can`t change anything.When you change setting from console, setting can be changed after reopening system -> ntp server.same in ntp client, clock...demo2.mt.lv have same bug. I have latest winbox.

Alex

may be you have expired license.try netinstall

Alex

Ap wds bridge for transparently wirreles connection, but not connected anywhere via wireless. one firewall rule for blocking access to unit from other networks. after upgrade i had about 18 megs of ram.after 3 hours free is 15.5.

Alex

You need to set country=no_country_set and frequency-mode=superchannel in your ap config and at cpe side scanlist=default,5120,country and frequency mode same in ap.You must have superchannel option in license

Alex

What's new in 3.0beta10: *) ip proxy - fixed crash; fixed HTTP POST method handling; *) fixed PCMCIA (non CARDBUS mode); *) fixed ethernet packet accounting (FCS 4 bytes were not included); *) ospf - fixed external and inter-area routes; *) ospf - after Dijkstra's algorithm was executed 256 times, i...

Alex

can this bug be named as Alex`s bug in changelog?

Alex

I`m planing to setup autoupgrade on pc based server.but i want to upgrade remote routerboards. If i upload npks for routerboard into pc router and it will reboots what happens? Is there any protection from installing mips version npks on pc?

Alex

yes, with latest winbox all working fine

Alex

on demo2.mt.lv same time is beta10.a there is one bug, witch was fixed and it is back.... terminal window in winbox can`t be open and if you type any symbol in search field winbox closes automatically

Alex

you can add to address list all local ips.and all traffic from/to ips witch are not in this list is international....

Alex

dst-nat

Alex

ok.now I have some questions: what is REAL troughtput have rb333 and rb600 series? can we do on these boards dual nstreme links with these boards? and general:price....

Alex

why rb1000 dont have minipci??? it would be very very "strong" board.without it and without posibility to connect daughtboard from rb500 series it is only strong wired router.for this i think we can use pc hardware.its cheaper and stronger....

Alex

Its nice to have ability in torch to use address lists.It may be useful for monitoring local and overseas traffic.For example from mynet to src-address-list=latvia or !latvia... I placed this request on wiki already, but want to know what think others...

Alex

with what packages?

Alex

upgraded 532A with Atheros AR5414 card.all working fine....

Alex

try to change baud rate

Alex

as I can see this company uses routerboards for units WITELCOM recommend setting Dragon II radios (all types in the Dragon II family based on MIPS) in "Regular CPU Mode - rather than the default "Power Save Mode". This is done in the CLI menu (\system routerboard settings - by the com...

Alex

do you have routerboard package installed?

Alex

updated some units(pc and rb)...working good

Alex

for nstreme you need at least 1 ghz system

Alex

download LATEST firmware from http://www.routerboard.com and follow instructions OR trythis way:format your nand from rb settings and run netinstall

Alex

you need to run netinstall.....

Alex

if you will reinstall routeros, your license will be safe. Routeros installation you can find on official site in downloads...

Alex

if your pc router support PXE booting you can boot from network.if no, your way is netinstall....

Alex

or may be works this configuration: ISP--1gbps--MT(with 2 bonded interfaces)==2x100mbps=====MT(with 2 bonded interfaces)---1gbps-FreeBSD.

Alex

janisk, what do you mean?

Alex

In wiki I found 3 ways how to do this but what is the best for me? :roll: My scenario: I have one 100 mbps uplink from my isp and xx.xx.xx.0/22.now we one more 100 mbps uplink.Core router is running under FreeBSD and i dont want to change this. I want to do this: ISP=Mikrotik-routeto-FreeBSD-xx.xx.x...

Alex

i have pc based router.after upgrade from 2.9.40 to 2.9.41 in logs I can see this: 02:08:41 system,info installed system-2.9.41 02:08:42 system,info installed wireless-2.9.41 02:08:42 system,info installed advanced-tools-2.9.41 02:08:42 system,info installing system-2.9.12... 02:08:42 system,info in...

Alex

all of soho routers can clone mac address.i dont think that it is hard to do this in soft.if you have 1 ethernet card, virtual interface can be linked without problem.if more, then may be by irq

Alex

Normis, can you add in next routeros virtual ethernet interface, witch can be connected to real ethernet card? When you change hardware of your router, routeros usualy lose ip address and arp table settings(they becomes invalid). If this feature will be avalaible, i think this "bug" will b...

Alex

if I have only 1 vote can i remove my vote from list and add it to other position or create new?

Alex

you can try to install latest routeros with netinstall

Alex

you need to reinstall routeros.i had this problem.use netinstall.

Alex

what is your cpu and how much memory do you have?

Alex

xp sp2 with latest updates.on 2.9.38 it works fine...where you got beta5?this bug i founded on demo server...

Alex

when open in winbox ip ->neighbour winbox closes automatically without any error

Alex

Thanks

Do that have hardware watchdog?

What speed have you seen via wireless?

The Rb500 will be 400mhz soon so that will be great.

Thanks

They (RB5xx 400 mhz) are already at stock in Latvia... I have two, but havent tested it yet

Alex

Than it is better than themes more

Alex

It Will be nice to see in MT software arpwatch tool.I had MT based core router, but now I have to use FreeBSD, because Windows (R) users very simple may change own mac-address and have access to Internet... arpwatch cant prevent it but can show "smart" user real ip, mac address...

Alex

a driver for what? your pc wireless card in windows? no way, there is too many of them

driver for nstreme

Alex

you dont need to do this.just start web-proxy and dns and all will be ok.and check your firewall rules.

Alex

Hello!
I haven`t board to test 3.0 but at public 3.0beta server(demo2.mt.lv) i found that in winbox system health shows incorrect information....wrong comma place?

this bug is only winbox bug....from console all ok

Alex

in 2.9.35 works fine for me.the file tst.txt is located in memory?what say /file print ?

Alex

this was a bug or not?

when old firrmware is located at nand, new firmware (from routerboard package) will never displayed in upgrade-firmware field...

Alex

Normis, please check mail.

Alex · i have 2.9.34 installed on this routerboard...

i have 2.9.34 installed on this routerboard...

Alex

I have few routerboards(112 and 511).As i know 2.9.34 come with new bios version 2.5...Almost on all routerboards upgrade was succeseful, but on one.... it shows current-firmware 1.13 and upgrade-firmware 1.13.routerboard package is installed.... where is problem? or it is not problem?

Alex

it is possible to redirect all users to specified web page, when clients open web pages first time? I want tell to my customers how to connect to some server....

Alex

can be added in torch posibility to watch traffic from/to address lists, specified in firewall? It may help to monitor overseas traffic, etc...

Alex

do you have wireless package installed and enabled in your system?

Alex

how you edit your message of day?(motd in bsd)

Alex

/ip neighbor discovery set ether1 discover=no. In this example RB is connected to network via ether1. Also you can setup access to your RB /ip firewall filter add chain=input src-address=myip1 action=accept /ip firewall filter add chain=input src-address=myip2 action=accept /ip firewall filter add c...

Alex

to keep config turn on "keep old configuration" in netinstall.boot device and protocol you may setup in /system routerboard settings

Alex

what cards do you use?problems with cables?routeros version?have you tried other antennas?

Alex

and without nstreme and with g-turbo 32 mbps...

Alex

If second and third routers are repeaters then you can setup wds bridge on them and route subnet /ip route add dst-address=192.168.4.0/24 gateway=10.0.10.105 from first to last router.

Alex

connect your board to pc via rs232 and check status of this board... may be you will need to reinstall routeros or reset settings

Alex

please write your config....without it we can`t help to find mistake...

Alex

MT admins, is it true?this setup can not be done with webrpoxy or webproxy-test package?is anywhere web-proxy-test documentation?

Alex

it was in Mikrotik lab at friday but not in download page...I think this delay is because new version is under stress-test now...

Alex

Hello!
How can be created transparent proxy, witch will be cache all exept connection to one first level domain (or list of ip)? If anyone is running this please share your configuration examples please....

Alex

actually it is recommended to run them at 333Mhz. that does not cause any problems at all.

but why default frequency of routerboard 5xx series cpu is 264 MHz?

Alex

i have done tests with rb532 ans 2.9.24...i used wds,a-turbo,cpu-frequency 330 MHz.Max speed what i saw was 32 mbps without nstreme and 25 mbps with nstreme enabled...

Alex

normis, how you got this speed? mips cpu installed in rb5xx series is too slow to power on nstreme...a-turbo or g-turbo cant provide these speeds...

Alex

i need to do queue per user ... if i will make only one queue rule for address list i will be able to shape my all overseas channel only

Alex

I created list with name latvia, witch contains all latvian subnets, after that i need to create 2 mangles: 0 chain=prerouting src-address-list=!latvia action=mark-connection new-connection-mark=oversea1 passthrough=yes 1 chain=prerouting dst-address-list=!latvia action=mark-connection new-connectio...

Alex

Hello! How may be done traffic division (local and overseas) on 2.9.24?I know what i need to do but don`t know how it can be done with 2.9 RouterOS :( I have local subnets list.I have to mark my subnets,then other local subnets.mark it as localtraffic.other traffic, that is not from/to mark localtra...

Alex

any info about new fast routerboard?cpu, memoty, etc

Alex

i have found bug with v 2.9.22 and intel pro 1000 gt desktop adapter.all works fine but in winbox interface stats are broken(show wrong information and blink)

.
With 2.9.20 all works fine

Alex

when this fix will be ready?

Alex

turn off nstreme.for nstreme you need at least 800 Mhz x86 CPU

Alex

We are working on NSSA. Eugene What's new in 2.9.19: *) fixed BGP memory leak in routing package; *) implemented write-sect-total for RB500; *) added feature to access hotspot servlet pages by suffix ".cgi"; *) fixed bug in sniffer; *) changed simple queues to work better together with pp...

Alex

example?

Alex

sergejs, if i dont use nat, i have to setup 2 packet-marks? and where is about traffic division (latvian and overseas) in 2.9 documentation?

Alex

I have 2 interfaces, first to isp(name=inet), second to lan.on lan interface are 3 ip addresses(3 subnets).i want to allow unlimited p2p speed beetwen my clients and limit all other (incoming and outgoing from/to internet) p2p to 70 mbps down and 50 mbps up.Version 2.9.18. Here is my config: / ip fi...

Alex

but no demo.mt.lv

Alex

since few weeks host demo.mt.lv resolves as 127.0.0.1.and anyone hasn`t access to first demo router :( I dont understand, it is mikrotik stuff mistake or someting else...but not all dors are closed :) connect to demo2.mt.lv via winbox.enter in ip->neighbors.you should see first line: internet 159.14...

Alex

firewall,arp table.for example: set arp to reply only on interface with address 192.168.1.1.add static entries from 192.168.1.2-192.168.1.9 to arp table.all others addresses will not work.sorry for my english

Alex

it`s now on demo routers

Alex

Alex

2.9.14 will be released soon.It is in mikrotik lab now.I know it because i`m spy 8) I suggest you to check again your sources where you got that info 8) My source is your demo server... http://www.latbs.lv/~alex/mt.jpg :D :D :D :D :D :D :D :D :D :D :D :D :D :D or it is a new bug? :shock:

Alex

2.9.14 will be released soon.It is in mikrotik lab now.I know it because i`m spy

Alex

I used 2.8.28, but after reading replyes about 2.9.12 i installed it on all routers.....works great...bandwich test on one link from ap to client router show 56.4 mbps (protocol tcp, direction send).Nstreme enabled, frame policy dynamic size, 2.4g-turbo, about 3 km).On 2.8.28 with same config bandwi...

Alex

checked.works

Alex

Will these versions work fine for wireless connection?I have 5 routers under 2.8.28.1 AP and 4 clients.i want upgrade all these routers to 2.9.12.If I update my AP to 2.9.12 first, other routers under 2.8.28 works with AP?

Alex

normis, did you receive my mail with supout file?What do you think about my problem...

Alex

Alex

no, only static routing and firewalled virus ports

Alex

normis?

Alex

yes, arp blocking only works with specific ip subnets

Alex

my problem is:anybody in my network can setup any free ip from 80.70.xx.xx and can access to internet.free means that there are no other computer with same ip in network.But arp with 80.70.yy.yy and 80.70.zz.zz works fine....I tryed to add in arp table ip 80.70.1x.x with mac address 00:00:AA:AA:BB:B...

Alex

I have pc based router(p4-1.5), mkt 2.9.12, 2 realtek nics, first for uplink from my isp(inet), second looks in my network(Netw).On second nic are 3 subnets(80.70.xx.xx,80.70.yy.yy,80.70.zz.zz). Arp on interface inet is set to reply-only.I have about 530 records in arp table.Clients with correct mac...

Alex · i have 2.9.12 and all working fine

i have 2.9.12 and all working fine

Alex

and what about updated RTL8169 driver? in documentation i found this:
Chipset type: RealTek RTL8169 PCI 10/100/1000Base

Compatibility:
RealTek RTL8169 Gigabit Ethernet (not recommended: may lock up the router)

Alex

where i can paste this code? for what version it is written? i have 2.9.6.when i paste it in queue simple os returns error: [admin@MikroTik] queue simple> add name="Peer to Peer 50MB" target-addresses =0.0.0.0/0 dst-address=0.0.0.0/0 interface=all parent=none direction=both pr iority=8 que...

Alex

i want to limit all-p2p in my network to 50 Mbps download and 50 Mbps upload. is this rule "correct" for my situation: name="queue1" dst-address=0.0.0.0/0 interface=all parent=none priority=8 queue=ethernet-default/ethernet-default limit-at=51200000/51200000 max-limit=51200000/51...

Alex

package, with supports R52 wireless card....

Alex

I want to establish 5 Ghz link using 2 CM9 cards, 2 pc routers,2 flat antennas, distance 2.5-3 km and mikrotik.Any experiance, comments?

Alex

use netinstall

Alex

you can try to catch mirrored signal, but this connection will be bad and unstable... what about wifi repeater in the middle?

Alex

try 5-turbo and tx-power=default

Alex

http://forum.mikrotik.com/viewtopic.php?t=3510

Alex

I want to see in RouterOS identd service....

Alex

Anybody tryed 2.9 with wireless?how about bandwitch?

Alex

i dont know

Alex

try wireless legacy package....

Alex

first problem report for 2.9.....nice version

what about your router?it is pc router or routerboard?

Alex

Mikrotik guys told me that it`s stable.But my rb500 now is broken.When i got it back, i will try it

Alex

normis, when it will be at download page?

Alex

which cards do you use?R52?it have some problems with signal...

Alex

2.9 is in mikrotik lab now...i seen this at /interface wireless scan wlan1-ap24 ssid rtest version 2.9

Alex

How much kpps mt can provide on P4-1.7 256 DDR for simple routing(no queues, ~65-70 firewall rules)?I have read one forum and there many ISP write that mt can provide less then 10 Kpps.Is it true?????BSD, for example, can provide 30-50 Kpps on this hardware.....sorry for my english

Alex

with nstreme enabled?"old" nstreme is compatible with "new" nstreme?i have 2.8.28 and 2.9RC9(MIPS)

Alex

will this new wireless package work with 2.8.28 with wirelessR52 package intalled?

Alex

try /system license print to view license upgrade time....if you upload to router new packages, upgrade will be done and if your upgrade time is over, router will work only 24 hours....

Alex

Why its cpu load is always 100 %?And 2.9RC9?

Alex

I have this problem too.And when i ping client, who have ip from another subnet and computer is down, i have "reply from xx.xx.xx.xx TTL expired" but xx.xx.xx.xx isnt registred anywhere on router.it`s client ip....

Alex

connect to demo.mt.lv, open ip->neighbors.There you can see Demo_v.29
and it`s mac adress.now /tool mac-telnet 00:0c:42:05:01:11 login demo without password That`s all.

Alex

I`m running 2 pc routers.First P4-1.4 256 drr 333 v 2.8.28 second p2-233 32 mb sdram v. 2.8.26 with cm9 65 mW cards.I have real 36.6 Mbps bandwitch

but after few hours speed is only 20 mbps

Why?
sorry for frong section, i can`t find post delete option....

Search found 215 matches