MikroTik

rushlife

I have a bunch of POE and non POE version and none of them have this problem after 6.48.1 update...

I don't see this like HW problem.

rushlife

RBmAP2nD with 6.48.1 connected to CAPsMAN ap's....MASSIVE packet loss (about 85%)

rushlife

:put [/interface ethernet get [/interface ethernet find default-name=ether1] mac-address ]

thx a lot bro
awesome

rushlife

revision r2 ?

no, first revision

rushlife

Hi everyone. What is the latest update on this issue? Was it possible to fix the problem using the new firmware version? Can I buy this device? Hi, I cannot be sure for 100% but for me, since ros 6.48 "stable" works these units just fine and I dont have any problems since then. Now I am r...

rushlife

The update-button will perform a reboot even if there is no update pending.

no, it will not

rushlife

weird, since 6.48 I have no problems whatsoever...

rushlife

rb3011 flapping, 1500 linkdowns for about 30 minutes rb4011 seems to be fine Hi @rushlife I like to ask you, did you upgrade FW (bios) on your 3011 ? I ask this because my 3011 is up with v6.48 and it is stable - NULL link down's , all ETH ports 1G, up without problems but i forgot to update FW (bi...

rushlife

rb3011 flapping, 1500 linkdowns for about 30 minutes

rb4011 seems to be fine

rushlife

CRS354 problems resolved ?
Please clarify.

viewtopic.php?t=160561

rushlife

CRS354 problems resolved ?

rushlife

Changes in this release: *) crs3xx - improved system stability on CRS354 devices; Not so successful. CRS354 is STILL useless. I can't count on this unit at all. I am waiting for fix couple of months and honestly I am starting be a little bit disappointed. Can actually someone really do something ab...

rushlife

no, even with last stable version 6.47.7 (which have mentioned fix for crs354 in changelog) problem still persist....
what a bummer....

rushlife

today installed on all of my units

rushlife

What's new in 6.48beta48 (2020-Oct-14 10:26):

Important note!!!

Using this version on CRS354-48G-4S+2Q+RM or CRS354-48P-4S+2Q+RM will cause booting issues and device may need to be reinstalled.

Carefully....

rushlife

yeah,
you can reboot device when a specific IP address does not respond or if hw freeze

rushlife

you can set netwatch action for some host which lost ping....

rushlife

I don't thing is necessarily hardware fault, but (what I think) for mikrotik is hard to reproduce. It can by caused by some type of data frame, some "wrong" hw signal from cheap network card.. I can be virtually anything.... I thing this is why is taking so long to come with some type of s...

rushlife

local forwarding ?

rushlife

today installed 6.48beta40 for all of my crs354 units
even with beta 35 no problems
we will se

problem is still present, bad luck....

rushlife

today installed 6.48beta40 for all of my crs354 units
even with beta 35 no problems
we will se

rushlife

CRS318-16P

I believe there will be also standard variant...

rushlife

thx Mikrotik

rushlife

6.48beta27 installed on my CRS354, so we will see.
Anyway - thx for your hard work / mikrotik team.

btw.after install I see in log this :
system,error,critical,,, error while running customized default configuration script: expected end of command (line 1315 column 53)

rushlife

no problem whatsoever...

rushlife

I have uptime more than 12 days and everything is just fine...
Really since upgrade to beta 12 I can not reproduce this error.

rushlife

I am running my CRS354 units with 6.48beta12 (testing), so far so gut.
Not even single problem since upgrade to this version of ROS.
I am watching this on 10pcs (354 with and without poe).

rushlife

ROS 6.48Beta23 should bring fix for CRS354 switches.
And it is "unpublic" release....

rushlife

what about 6.48Beta23 ??

rushlife

...Your comment îs more stupid than mine. I doubt it. ...And you are off-topic. More then you ? Again,I doubt it. Here, we are talking about a broken hardware, not other peoples comments. YOU are talking about NOTHING. You just whining and swearing here. Not a single bit of constructive thinking, n...

rushlife

FYI : little unstable for CRS354, sometimes this unit won't boot with this version ROS

rushlife

now I am running ros7.1b, we will see.......

rushlife

even with ros 6.47.1 is problem still present

rushlife

I just wanted to say thank you very much for all your hard work.

+1
thx Mikrotik, very appreciated

rushlife

for everyone with this issue, please try new 6.48beta 12 and let us know about results, I will try it also...

rushlife

two of my units (I have around 15pcs totally) are affected with this issue and both are failing on ether1-8, I can confirm that, no any other port show problem...

rushlife

hi, tried someone ros7.0b8 on CRS354 ?
possible fix for interfaces forwarding problem ?

viewtopic.php?t=160561

rushlife

no biggie, on many units I can move client to ether 9 or higher
i will wait for fix and if sometime some unit fail again on ports 1-8, just will do restart and show must go on...

my trust on mikrotik is no broken, everyone make mistakes

rushlife

+2
another switch started doing that thing
OMG
I am running whole network on these switches, I will kill my self...

rushlife

+1

i have about 15 pcs of crs354 (with / without POE - both variant ) and one of them have also this issue

no some special setting, just bridge all over interfaces and dhcp-client on that bridge

ros 6.47

rushlife

rushlife

Upgraded all of my 500pcs Mikrotik devices, no problem so far...
Thx for great job in this hard time. Appreciated....

rushlife

distorted fonts and slowness
don't even mention obligate to install bunch of software (over 1GB) because one small binary (about 2MB)

rushlife

Hi to all of you, especialy MIkrotik team

.
I would be awesome use these quarantene days for making dedicated versions of winbox ( for linux / os x ).
Social distancing and lots of home office workers leads to make their working hours productive at least a little....

rushlife

for what exactly ?
btw. still no native version for mac and linux, still no shortcuts implemented

,
otherwise - thanks for new version, is great, appreciated...

rushlife

Just great, my first 6pcs of CRS354-48P-4S+2Q+RM units arrived in monday and I could not be happier, BUT what a surprice about "made in china" label :-/... I was really (perhaps naively) thinking that Mikrotik always (and for ever) will be making everything in Latvia ... :(, It was HUGE pl...

rushlife

Hi, about CRS354-48P-4S+2Q,
Mikrotik support says it will be released about couple weeks after CRS354-48G variant.
I will believe them, We will seee...

rushlife

I know that, I am just wondering why is not available on market now....

rushlife

poe variant ???

rushlife

Still nothing ?

(( ??

rushlife

Still no native Linux client

+ 1

rushlife

'routeros-mipsbe-6.46.npk', no such file

I can confirm that too....

rushlife

Still nothing ?
Not a single official word about CRS354 ? No sale/release date ? Nothing ?

rushlife

It got announced today in Athens' MUM.

Thx man, it's make my day.

I am wondering when will be these on sale.

rushlife

We always announce new products in MikroTik User Meeting (MUM) events first.

Ok, I am get it BUT...CRS354 isn't a "new product".
It has been announced a way long ago on MUM and I just need to known when I can physically have these units by me.

rushlife

Still coming later this year.

Hi Normis, please can you tell us more info ?

rushlife

Look at this

!
https://www.youtube.com/watch?v=b4Wp4SzdNj4

rushlife

any hw news ?

rushlife

+1, It would be great to have this...

rushlife

Really ?
Still no CRS354 switches ?
Really ?!?!

rushlife

This is AWESOME.
Ros7 beta !

It's make my day ! Thx Mikrotik

rushlife

Normis: When will the CRS356 finally hit the surface?
It was presented as upcoming already at the Berlin MUM some 17 months ago

never, CRS356 never even exist....
however crs354 should be available around q4 this year

rushlife

Guys, I am using wine, linux, mikrotik and all of that stuffs since roughly 2008 or so... I known all of this tricks and thx for helping but this is exactly that reason for make native app (winbox). All of this little things are annoying. Especially when you work with this tool 6 or more hrs daily. ...

rushlife

P.S: fun fact, RouterOS developers develop Winbox "Wine first". I get it. I appreciate it. BUT : there is grag&drop problem (winbox sometime freeze after d&d; tested od multiple distros //with kde, gnome, mate..// and also with multiple versions of wine) font problem speed "p...

rushlife

Winbox can be easily used on *nix systems. I never said it cannot be. I wrote NATIVE... First try daily manging about 300tiks with windows and afther that the same type of work with winbox throug wine (let's say under ubuntu). If you will find no difference, you have some weird perception problem.

rushlife

what about shortcuts guys ? :-) https://forum.mikrotik.com/viewtopic.php?f=21&t=137745&p=679086#p679086 What shortcuts? Where? Your link also doesn't explain what you want https://forum.mikrotik.com/viewtopic.php?f=21&t=139189&p=686485#p686485 I just dream about winbox, with optiona...

rushlife

what about shortcuts guys ?

viewtopic.php?f=21&t=137745&p=679086#p679086

rushlife

up up up

rushlife

hi, you must set PoE Out : to "forced ON"
I have this errors on couple of my switches but this was always solution for me.

rushlife

CRS354-48G-4S+2Q+ CRS354-48P-4S+2Q+ CRS332-32S+RM Will be these ever released ? up up up will be these ever be released ? It is one year from announcement and still nothing, not a single official word about these units.... I don't get it. It was announcement again at MUM Europe 2019, orders since Q...

rushlife

CRS354-48P-4S+2Q+
CRS354-48G-4S+2Q+

still nothing ?
:"(

up up up

rushlife

CRS354-48G-4S+2Q+
CRS354-48P-4S+2Q+
CRS332-32S+RM

Will be these ever released ?

up up up
will be these ever be released ?

It is one year from announcement and still nothing, not a single official word about these units.... I don't get it.

rushlife

Hi all,
I noticed since 6.44 and now 6.44.1 some neighbors are displayed without their IP address.. is there a solution?

+1

rushlife

ip neighbor

In most cases I don't see ip address.

All mikrotiks around are on the same version, 6.44 stable.
"Discovery interace" is set for "all" on all my devices.

rushlife

Is there any news on the CRS312-4C-8XG?

It was announced April 2018.

I am so pumped up for these product but still nothing...
I will keep looking for them.

rushlife

CRS332-32S+RM
CRS354-48P-4S+2Q+
CRS354-48G-4S+2Q+

still nothing ?
:"(

rushlife

after upgrade from v6.43.7 to v6.43.8 I am unable to have USB APPLE ethernet adapter, in /system/serources/usb
I see vendor Apple, Name : Apple USB Ethernet Adapter, even serial nuber is visible but interface "Ether2" is missing and all firewall rules for that interface are RED...

rushlife

Hi Normis, what about 48 port switches ?
When will be these available ?

Thx

rushlife

installed on hundreds of my devices,
ccr1009,1016,1036, 1072,crs328,crs317,112,226,125, metal, 750, hex, map, wsap........

No problem at all....

rushlife

Hi guys from Mikrotik.
It is there any chance to make this lineup with 1Gbps interfaces ?
I love my wsAP ac lite but, 100Mbps ifaces are little bit outdated....

I really hate UBNT but look at this piece of s**t : UBNTUAP-IW-HD

rushlife

still no release date ?

rushlife

I will be very disappointed if version for Apple iOS will be better then version for Android. I am a "little bit" for linux like (based) devices, not for Apple proprietary sh*ts.

rushlife

CRS354-48G-4S+2Q+
CRS354-48P-4S+2Q+
CRS332-32S+RM

Will be these ever released ?

rushlife

Release day of these units ?

rushlife

any date for CRS332-32S+RM and CRS354-48* units ?

rushlife

rushlife - Shortcuts are and have been available all the time. Are you talking about some specific ones? Can you provide an example? denisun - Can you provide an example? Categories mode work just fine for me also in IPv6 firewall menus. I mean something like "close all windows", open las...

rushlife

rushlife - What about them?

Will be sometimes any ? It would be useful....
Please........

rushlife

super, thx for new version
btw. what about shortcuts ?

rushlife

upgraded hAP, with empty password I can confirm bug, it is no longer possible to login

rushlife

super news, I will test it at soon as possible...
btw. It's a quite list of changes, you are doing great job, thx guys...

rushlife

I have this problem too, in log: received deauth, sending station leaving.
I have 4 APs, managed with capsman. Phone is (sometimes) flapping between APs, struggling with choose one of then to connect.

rushlife

Any date ?
I seriously need this switches...

rushlife

today. that mesh is so cool

omg, this is superb
and that look on greatest city in the world.... overwhelming

rushlife

Fixed. Problem was in chanel width. Value 20Mhz is probably not fine for 802.11n

edit, not fixed

still the same

rushlife

I was planning to upgrade my 2100s and 3100s, but the lack of USB and LCD is a deal breaker for me.
I didn't get the 1100, and it looks I will pass on the 4100 too. Will stick with the 2100 and 3100 untill I can.

??
none of them actually exist..

rushlife

Hi folks. I have problem. I got new phone. BlackBerry Key2 with Android 8.1 and with capsman i have very often DEAUTH, LEAVING. Phone strugling with assotiating to one of caps ap's.

ROS in lattest version.

rushlife

@rushlife: Thank you for the scripts!

noproblemo

rushlife

enjoy

rushlife

I will take a look on this too.

edit : no change imho

rushlife

How did you upgrade 300 devices?
Script / tool? Or manual 1 by 1 ?

Hi, I have linux (ubuntu server) with bash script ( which I made myself ) to upgrade all of it.

rushlife

Up
Still +1 on this

rushlife

upgraded almost 300MK devices today and so far without problem
...

Wow, you are brave

or stupid..

no, really, I have lack of bad experiences...

rushlife

upgraded almost 300MK devices today and so far without problem

already done on types :
crs 328 poe
crs 317
crs 125
crs 226
ccr 1009
ccr 1016
ccr 1032
metal 52SHPacn
metal 2SHPn
rb 2011
rb 3011
mAP lite

In late night I must also done upgrade on main-rt CCR1072, I supposing no problem also

rushlife

xDSL modem from Mikrotik would be great....

rushlife

guys, I love winbox tool but still no shotcuts ? really ? so shame...

rushlife

According to changelog it is fixed

What's new in 6.40.8 (2018-Apr-23 11:34):

!) winbox - fixed vulnerability that allowed to gain access to an unsecured router;

So why would they post this again if it was fixed in April?

do you can read ?

rushlife

ok but what about cerfs ?

rushlife

up up

rushlife

Hi guys,
it is there some workaround to move capsman to another / more powerful / device ?
Let's say I have capsman on rb3011 and I wanna move this to some CCR hw...
How I can do this ?

rushlife

eap-ttls-mschapv2 on capsman ???
can someone help me ?
It is even possible ?

rushlife

I am using Mikrotik for whole our company. I have already 4pcs ccr1072, about 5pcs ccr1036, many many CRS switches with different numbers of ports and speeds. Also all wireless solutions (Hundreds of pcs) are builded on mikrotik. All our warehouses using CAPsMAN technology and Mikrotik radios. All o...

rushlife

still no shortcuts ?

rushlife

I am SO HAPPY !!!!

CRS354-48P-4S+2Q+
Thank you mikrotik.

rushlife · Re: 16/32/48 ports I am SO HAPPY !!!! CRS354-48P-4S+2Q+

I am SO HAPPY !!!!

CRS354-48P-4S+2Q+

rushlife

hi, anybody...
some fix ? any update ?

rushlife

Just a little remark: generally, I would first rename interfaces to "default_name.temporary_suffix", and then finally to "default_name". Because if, for example, ether1 was renamed to ether2 and ether2 was renamed to ether1 - the script will fail :) Nice tip, some example ? :-)

rushlife

How you guys learned this scripting ? I mean...training directly in ROS and debuging is awful... How you doing that ? It's like any other programming language, each has its own specifics. So I basically maintain some basic knowledge regarding what is possible in that language and what are its disti...

rushlife

any update ?

rushlife

Absolutely great. Thx.
Works like a charm.

How you guys learned this scripting ? I mean...training directly in ROS and debuging is awful...
How you doing that ?

rushlife

I want to print a subset of the inetrfaces via script, i.e. something like: "/interface print where name="ether*" /interface print where name~"^ether" Hi Chupaka, I need write some script to rename ALL interfaces in router to DEFAULT-NAME. Ex.: if some idiot renamed interfa...

rushlife

hi, still no shortcuts, shame....

rushlife · Re: 16/32/48 ports up up up pls, make some CRS with 48 ports for us....

up up up
pls, make some CRS with 48 ports for us....

rushlife

up
I alsa wanna mikrotik CRS with 48 ports....
Pls take my money !

I honestly love mikrotik hw.

rushlife

Up again.
CRS with 48ports and with some SFP+ ports also.
Shut up and take my money !

rushlife

Hi guys, it is here some list of shortcuts for using with winbox ?
Support winbox actually some shortcuts ? I could be superb.

up

rushlife

never mind forget it
I already figured out, it is under / interfaces - list

Hope this will help someone

rushlife

Hi folks. Since ROS 6.41 I was noticed some changes on IP NEIGHBOR. Before upgrade my ROS, it can be changed every single interface for recieving/transmiting LLDP (l2 neigbor information). Now I cannot figure out, how I can disable discovering on my "WAN" interfaces and public "WIFI&q...

rushlife

I'm so sorry, I will miss that function.
It is there any chance to implement this in future ? I mean WEB static keys to CAPs ?

rushlife

up up

rushlife

Hi guys, it is here some list of shortcuts for using with winbox ?
Support winbox actually some shortcuts ? I could be superb.

rushlife

Hi guys. I wanna set my mikrotiks to cap-mode. It is for big depot building with many mobile terminals (mototola,symbol) and I want try roaming (between APs) with CAP function. BUT, I have problem. These little terminals are set from supplier to use WEP, 104bit static key wifi security and I dont kn...

rushlife

up again for 48ports switch CRS, more SFP+ ports = better switch for me

rushlife

hi guys I also have some problem with global variable. I have already two script, one reading "default routes" (given by dhcp server) and these IP addressis storing as global variable. One for each WAN interface ( I have two wans ). But when i run another script, which need these variables...

rushlife

Big thanks for script on dhcp-client, it's handy.
BUT, what about script for "dhcp-client" integrated in ppp client / section ?

Thanks guys.

rushlife · Re: 16/32/48 ports any official statement ?

any official statement ?

rushlife

+1 for swicth

I also wish 48 ports for CCR router ( some sort version of 1072 or something )...

rushlife

Sure. I am using distant logging together with local logging to files. I know how to use multiple conditional logging or other stuff. But simple handy and fast search / filter feature within winbox is really missing.

+1

rushlife

"First - you can't delete dynamic routes...the system just won't let you." Obviously you know much less than I, surprisingly. Dynamic GW routes from dhcp server can be easily deleted, no problem at all. I helped myself and I wrote this : :foreach c in=[/ip route find distance=88 dynamic=ye...

rushlife

still nothing ?

rushlife

I wish standard bash ( or another command processor ) scripting interface. Scripting in mikrotik and debugging scripts for mikrotik is horrible. Sorry but it is just true. I spoken about that with many many colleagues and every single man have this wish for new mikrotik. Please, please consider this...

rushlife

Hi folks, can someone help me ? I am trying write a script, that will take two "default routes" (dhcp client on two interfaces/WANs) given from DHCP servers and rewrite them, like a standard static route. I want this for adding ROUTE-MARKS on these "new" created routes. I have al...

rushlife

Hi. Found someone solution for this case ?
I need routing marks on routes from DHCP server smi

Pleease. Help meeee.

rushlife

any solution?
i have the same situation

...

rushlife

I can confirm this behaviour also.
RB2011, ROS 6.36, mikrotik firmware 3.33
Usb modem is not recognized until I remove power cord and do COLD reset.
Weird.

rushlife

+1 for advanced DNS server

rushlife · Re: 16/32/48 ports up ccr with 48ports pls ideal with sfp+ port for uplink

up
ccr with 48ports pls
ideal with sfp+ port for uplink

rushlife · Re: 16/32/48 ports up for 48port switch and ccr take my money

up
for 48port switch and ccr

take my money

rushlife

ROS 6.35.2 on ccr1072 is there problem, LCD does not working, whole time is screen empty / white

rushlife

on ccr1072 is there problem, LCD does not working, whole time is screen empty / white

rushlife · Re: 16/32/48 ports up up I need this....

up up
I need this....

rushlife

+1 for advanced DNS server

I love mikrotik and I use it every day but standard DNS feature is simply poor.
I definitely need built-in advanced DNS in new ROS.

rushlife

+1 for advanced DNS server

I love mikrotik and I use it every day but standard DNS feature is simply poor.
I definitely need built-in advanced DNS in new ROS.

rushlife · Re: 16/32/48 ports up up up

up
up up

rushlife · Re: 16/32/48 ports up It's anybody here ?

up

It's anybody here ?

rushlife

ok, working on it
horray..

thanks MikroTik.
but no promises! I'm just saying we will consider the possibilities

hi Normis, any progress ?
I am waiting for routerboard cloud router with 48 ports almost two years

Search found 155 matches