Community discussions

MikroTik App

Search found 58 matches

by kashifzai86
Fri Sep 08, 2023 8:19 am
Forum: General
Topic: CGNAT issue having 2 WAN Connection
Replies: 3
Views: 930

Re: CGNAT issue having 2 WAN Connection

If your changing config in netwatch, I think you'd have to remove all the connections associated with the failed WAN in /ip/firewall/connections as well. Otherwise, they'd still maintain the NAT mapping to the dead upstream ISP Dear Your advice is good for, Will check if this happen, I tried to rem...
by kashifzai86
Thu Sep 07, 2023 10:25 pm
Forum: General
Topic: CGNAT issue having 2 WAN Connection
Replies: 3
Views: 930

CGNAT issue having 2 WAN Connection

Hello to All Members I need help on below scenario. I have 2 WAN Connection with Fiber Optics. WAN1 = 14.192.xxx.xx/24 ---using CGNAT 1:8 ratio --- internet bandwith = 3gb WAN2 = 103.195.xxx.xx/28 ---using CGNAT 1:8 ratio --- internet bandwith = 2gb LAN = 100.64.0.0/21 ---- pppOE users dailing to Mi...
by kashifzai86
Wed Jun 21, 2023 9:15 am
Forum: General
Topic: PPPoE User start working, after restarting Router - Session Hangs
Replies: 0
Views: 410

PPPoE User start working, after restarting Router - Session Hangs

Dear Mikrotik Community From Several Months, we are observing that users are complaining about their router becomes hang. They ususally restart their router and the internet starts working. I tried to rectify the issue, but I'm not able to fix it, most probably I can't able to went to the target iss...
by kashifzai86
Fri Jun 09, 2023 6:11 am
Forum: General
Topic: How to get Facebook & Youtube IP Address list
Replies: 2
Views: 1347

How to get Facebook & Youtube IP Address list

Hi All

I need to send my Facebook and Youtube traffic to other WAN, in that case I need to fetch Facebook and Youtube IPs address list, every time so every request passed to same WAN, where I need to divert Facebook and Youtube request.
by kashifzai86
Thu Dec 08, 2022 3:40 pm
Forum: General
Topic: Mikrotik Disconnecting PPPoE Clients after upgrading to Router OS v 7.6
Replies: 0
Views: 186

Mikrotik Disconnecting PPPoE Clients after upgrading to Router OS v 7.6

Dear Experts and Mikrotik Forum Members

I'm now running in a Trouble, after updating Router OS v 7.6 in CCR2116, my few users are disconecting continously. I need help on setting routing again to *Factory Defaults Settings*

Please let me know, how to do it??
by kashifzai86
Sun Nov 13, 2022 2:59 pm
Forum: General
Topic: NetMap Configuration Issue, Need to verify it [SOLVED]
Replies: 7
Views: 1376

Re: NetMap Configuration Issue, Need to verify it [SOLVED]

Thanks Anyway ISSUE SOLVED, I delete few rules and use only 3 Rule following below:- add action=netmap chain=srcnat comment="TCP- NetMap- CGNAT Rule" \ out-interface-list=WAN protocol=tcp src-address=100.64.0.0/21 \ to-addresses=X.Y.254.0/24 to-ports=1024-9087 add action=netmap chain=srcna...
by kashifzai86
Sun Nov 13, 2022 1:48 pm
Forum: General
Topic: Cascading Mikroitk [SOLVED]
Replies: 7
Views: 1999

Re: Cascading Mikroitk [SOLVED]

It sounds like your problem is more with design than the router. Ideally you should separate network functions so they can scale. For PPPoE, take a look at this article to create multiple MikroTik BRAS routers for the same L2 domain to achieve load balancing and high availability https://stubarea51...
by kashifzai86
Mon Nov 07, 2022 5:27 pm
Forum: General
Topic: NetMap Configuration Issue, Need to verify it [SOLVED]
Replies: 7
Views: 1376

Re: NetMap Configuration Issue, Need to verify it [SOLVED]

When you had a 1:5 ratio and (supposedly) an unlimited port range, your clients complained; now, you have a 1:1024 ratio and a limited port range (so much less client-side ports available for connections to the same server) and the clients do not complain. This suggests that the reason of the short...
by kashifzai86
Mon Nov 07, 2022 10:20 am
Forum: General
Topic: NetMap Configuration Issue, Need to verify it [SOLVED]
Replies: 7
Views: 1376

NetMap Configuration Issue, Need to verify it [SOLVED]

Dear All Mikrotik Community This is Kashif Khan Actually, I was using CGNAT rules almost at Ratio of 1:5 (i.e. 1 public IP : 5 Private IPs). I have a pool of /24 network of Public IP and almost 1250 Private IPs allocated for users. My clients were complaining from last 3 to 4 months about internet s...
by kashifzai86
Sun Nov 06, 2022 9:26 pm
Forum: General
Topic: Cascading Mikroitk [SOLVED]
Replies: 7
Views: 1999

Re: Cascading Mikroitk [SOLVED]

There is no way to just "pour more CPU and RAM" into an existing router by means of interconnecting it with another one. But in the context of the other topics you have open/contributed to, you can use multiple PPPoE servers in parallel and the clients will more or less evenly distribute ...
by kashifzai86
Sun Nov 06, 2022 9:22 pm
Forum: General
Topic: Can I make Parallel PPPoE Server in 1 network [SOLVED]
Replies: 6
Views: 1082

Re: Can I make Parallel PPPoE Server in 1 network [SOLVED]

Thanks to All Friend and Group Members.

Your all suggestions works for me with multiples Ideas
by kashifzai86
Sat Nov 05, 2022 8:10 am
Forum: General
Topic: 2 pppoe servers in the same network
Replies: 3
Views: 1463

Re: 2 pppoe servers in the same network

There is an option to set service name for pppoe server that is supposed to be used just for that you need. If service name is specified in client settings that it will try to connect to specified pppoe server, not to the first one which answers. Hey, is there any update on this thread because I di...
by kashifzai86
Sat Nov 05, 2022 7:53 am
Forum: General
Topic: Cascading Mikroitk [SOLVED]
Replies: 7
Views: 1999

Re: Cascading Mikroitk [SOLVED]

By cascading do you mean load balancing across multiple routers? Or something else?
Basically, I need to Double the harware resources of Mikrotik in a same network.. I mean 2 mikoritk work together so their hardware resources become one.
by kashifzai86
Sat Nov 05, 2022 7:36 am
Forum: General
Topic: Can I make Parallel PPPoE Server in 1 network [SOLVED]
Replies: 6
Views: 1082

Can I make Parallel PPPoE Server in 1 network [SOLVED]

Hi Guys Basically, What I'm thinking to achieve is that possible that we can have 2 Mikrotik places within the same network, which can run their own PPPoE Server. I have the authority to switch clients on any of the PPPoE servers, which I can choose to move them into. Is there any way? is there othe...
by kashifzai86
Wed Sep 07, 2022 1:04 pm
Forum: General
Topic: Cascading Mikroitk [SOLVED]
Replies: 7
Views: 1999

Cascading Mikroitk [SOLVED]

Hi Guys.

I'm using CCR2116 & CCR1036 together, I was using CCR1036 (as PPPoE server) & CCR2116 (CG-Nating + Queues).

I need to about Mikrotik CASCADING configuration, so that I can achieve "Double Performance with Cores & RAM"
by kashifzai86
Wed Aug 31, 2022 9:27 am
Forum: General
Topic: PubG Game Ping Issue - High Latency
Replies: 0
Views: 303

PubG Game Ping Issue - High Latency

Hi I'm using Mikrotik CC2116, I need to prioritize PubG Game to go as FastTrack Connection.

Please, advise how to make it and how to get updated PubG Game Server Lists??
by kashifzai86
Fri Jul 29, 2022 4:38 pm
Forum: General
Topic: ISP Creation with Mikrotik to run 2000users [SOLVED]
Replies: 1
Views: 731

ISP Creation with Mikrotik to run 2000users [SOLVED]

Dear Forum Freinds & Experts I have purchased an area where around 2000 users are there and before this TMG & Linux Squid is used along with Cisco 4948e switch. Now, I need experts' suggestions on how to manage and construct a network for 2000-3000 users by using Mikrotik Device and FTTH. I'...
by kashifzai86
Fri Jun 24, 2022 12:07 pm
Forum: General
Topic: Mikroitk Perfomace over 1500suscribers - Issue [SOLVED]
Replies: 4
Views: 901

Re: Mikroitk Perfomace over 1500suscribers - Issue [SOLVED]

I'm not sure I'd replace the router at all. It's clearly well-sized for your normal load case. Instead, I'd look for a way to apply some type of queueing to PPPoE connection establishment packets, to calm the thundering herd. There's no good reason you should be expected to handle reconnection by n...
by kashifzai86
Fri Jun 24, 2022 10:14 am
Forum: General
Topic: Mikroitk Perfomace over 1500suscribers - Issue [SOLVED]
Replies: 4
Views: 901

Mikroitk Perfomace over 1500suscribers - Issue [SOLVED]

Dear All Forum Members and Experts I want to know a Practical Solution for the issue I'm addressing below. I have almost 1600 subscribers and around 1.9gb bandwidth is utilized. My CPU is running overall to 30%---to--45% every time. I'm running PPPoE Server and my clients are connecting using PPPoE ...
by kashifzai86
Thu Jun 23, 2022 11:30 am
Forum: General
Topic: Deny Rules stop Working after disabling Connection Tracking [SOLVED]
Replies: 6
Views: 837

Re: Deny Rules stop Working after disabling Connection Tracking [SOLVED]

The answer is inside what you do not read on the text you quoted... Extended: How can know the firewall if the packet is coming from an already established connection or not, if you disable connection tracking?... Thanks for helping me, but this article works goods, If you know any good method to s...
by kashifzai86
Thu Jun 23, 2022 11:06 am
Forum: General
Topic: Deny Rules stop Working after disabling Connection Tracking [SOLVED]
Replies: 6
Views: 837

Re: Deny Rules stop Working after disabling Connection Tracking [SOLVED]

For example, if you disable connection tracking, how can the firewall know if the packet is invalid or not? Obviously the firewall is not completely functional with connection tracking off, Every single new packet is considered a new connection because... is not tracked... Yes, I understand that bu...
by kashifzai86
Thu Jun 23, 2022 7:33 am
Forum: General
Topic: Deny Rules stop Working after disabling Connection Tracking [SOLVED]
Replies: 6
Views: 837

Deny Rules stop Working after disabling Connection Tracking [SOLVED]

Hey to All Experts here I m getting an issue after disabling Connection Tracking, non of my Filter Rules are working Except "Accept Rules", Please do let me know the issue, I have also attached a picture for reference. Basically, I went through this article and did it, after it happened. h...
by kashifzai86
Mon Mar 28, 2022 5:05 pm
Forum: General
Topic: RAM restriction on Unlicense x86 Machine
Replies: 4
Views: 530

Re: RAM restriction on Unlicense x86 Machine

x86 architecture is limited to 2GB RAM ... it's linux kernel doing, has nothing to do with ROS license level. If you want to use more than that, you have to either use CHR (ROS run inside a VM) which is 64-bit) or convert your installation to x86_64 (that might not be possible with recent ROS x86 v...
by kashifzai86
Sun Mar 27, 2022 10:33 pm
Forum: General
Topic: RAM restriction on Unlicense x86 Machine
Replies: 4
Views: 530

RAM restriction on Unlicense x86 Machine

Hello to All Memebrs and Forum Users !!! This is Kashif Khan, from Pakistan. Long time using Mikrotik RouterOS and apprieciating Efforts of Mikrotik Community !!! ****ISSUE ***** I have install RouterOS on HP D380 gen8 machine having 32gb RAM & 10core Intel Xeon Processor, but I'm getting an iss...
by kashifzai86
Tue Jul 06, 2021 7:55 am
Forum: General
Topic: RouterOS USB not working after 24 hours - HP Proliant DL360p Gen 8
Replies: 6
Views: 949

Re: RouterOS USB not working after 24 hours - HP Proliant DL360p Gen 8

I tried to work with ESXI Vsphere after applying License it is only Allowing 8cpu limit, however I need to use all 40 threads available in my HP Proliant 360p G8 for mikrotik CHR working.

Can someone help me on XenServer is there any limit on that???
by kashifzai86
Mon Jul 05, 2021 11:58 am
Forum: General
Topic: RouterOS USB not working after 24 hours - HP Proliant DL360p Gen 8
Replies: 6
Views: 949

Re: RouterOS USB not working after 24 hours - HP Proliant DL360p Gen 8

Ok thanks for helping me, Tell me one more thing.

If I use CHR Image and I want my mikrotik Instance to start Automatically if powers goes down anyHow, Is that possible like it happen in normal x86 OR I need to be Power ON instance manually??
by kashifzai86
Mon Jul 05, 2021 11:09 am
Forum: General
Topic: RouterOS USB not working after 24 hours - HP Proliant DL360p Gen 8
Replies: 6
Views: 949

Re: RouterOS USB not working after 24 hours - HP Proliant DL360p Gen 8

I do not remember if are on timed-base use or based on current date.. See at what time you purchased the license, go back with clock at that time and date, boot without internet and apply the licence. I do not understand why your choice to use x86 instead of CHR. With VM like ESXi the virtualized h...
by kashifzai86
Mon Jul 05, 2021 10:11 am
Forum: General
Topic: RouterOS USB not working after 24 hours - HP Proliant DL360p Gen 8
Replies: 6
Views: 949

RouterOS USB not working after 24 hours - HP Proliant DL360p Gen 8

Dear All (Support Team and Experts) I have purchase HP Proliant DL360p Gen 8 server, I tried to boot from SSD SATA Hard Disk but its Show Error " COULD NOT MOUNT DISK - PLEASE ATTACHED TO SOMEWHERE ELSE". After googling & Searching Mikroitk Forum - I purchased 8gb Flash Drive (Usb) and...
by kashifzai86
Sun May 30, 2021 6:21 pm
Forum: General
Topic: DDoS Attack blocking my Own users - How to fix Users [SOLVED]
Replies: 4
Views: 1106

Re: DDoS Attack blocking my Own users - How to fix Users [SOLVED]

Change in-interface-list to WAN instead to only detect from inbound traffic.
Hmmm... Sounds Good... Will do and then see Whats happen
by kashifzai86
Sun May 30, 2021 3:04 pm
Forum: General
Topic: DDoS Attack blocking my Own users - How to fix Users [SOLVED]
Replies: 4
Views: 1106

DDoS Attack blocking my Own users - How to fix Users [SOLVED]

Hello All. I have implemented DDoS Rule quite long time, by using this thread https://help.mikrotik.com/docs/pages/viewpage.action?pageId=28606504 But from few days I'm monitoring that some of my users IP are listing within "DDoS Attackers List" (see attached file for reference) i.e. IP Ra...
by kashifzai86
Sun May 30, 2021 3:32 am
Forum: General
Topic: Mikroitk Router OS (Trial Version Limits) [SOLVED]
Replies: 3
Views: 1392

Re: Mikroitk Router OS (Trial Version Limits) [SOLVED]

You can check about limitations of particular ROS license levels in this document . AFAIK ROS x86 is 32-bit and is thus limited to using 2GB RAM (usual limitation of "straight" 32-bit linux kernel). I don't know about issues with exceeding certain number of PPPoE active sessions. I wouldn...
by kashifzai86
Sat May 29, 2021 1:01 pm
Forum: General
Topic: Mikroitk Router OS (Trial Version Limits) [SOLVED]
Replies: 3
Views: 1392

Mikroitk Router OS (Trial Version Limits) [SOLVED]

Dear All Please do let me know, I'm installing Mikroitk Router OS (Long term) version on my Dell PowerEdge (x86 Machine). Is there any limit in Trial Version of Mikrotik Router OS (i.e. for 24 hours) Because I'm getting below issues right now:- 1) Only 2gb RAM is showing out of 16GB Ram 2) PPPOE Ses...
by kashifzai86
Sat May 22, 2021 5:03 pm
Forum: General
Topic: Why AHCI Mode is not accepted in Mikroik !!! Need to Update it [SOLVED]
Replies: 8
Views: 2164

Re: Why AHCI Mode is not accepted in Mikroik !!! Need to Update it [SOLVED]

>>>AHCI is the new Technology and Mikrotik should need to adopt it<<< Why and for do what at "AHCI speed"? AHCI is slower than SDD native speed... NVMe is the "new Technology" (2013?), and is already exceeded, update your knowledge RouterOS is a... Router OS, not a NASsOS :))) O...
by kashifzai86
Thu May 20, 2021 7:46 pm
Forum: General
Topic: Why AHCI Mode is not accepted in Mikroik !!! Need to Update it [SOLVED]
Replies: 8
Views: 2164

Why AHCI Mode is not accepted in Mikroik !!! Need to Update it [SOLVED]

Why mikrotik not provide Support for x86 to work in AHCI Mode instead of old IDE Mode?? AHCI is the new Technology and Mikrotik should need to adopt it.
by kashifzai86
Thu May 20, 2021 7:37 pm
Forum: General
Topic: Mikrotik Router OS not installing on Dell PowerEdge 620
Replies: 3
Views: 1392

Re: Mikrotik Router OS not installing on Dell PowerEdge 620

supports only ide disks

What do you expect to do with RouterOS on Dell?
I want to Install Mikrotik Router OS on Dell Poweredge Bairbone, not willing to install it on Xen or Vmware
by kashifzai86
Wed May 12, 2021 3:49 pm
Forum: General
Topic: Mikrotik Router OS not installing on Dell PowerEdge 620
Replies: 3
Views: 1392

Mikrotik Router OS not installing on Dell PowerEdge 620

I'm trying for many days to install Mikrotik Router OS x86 on Dell Power Edge Servers 620 & 730, It says can't find Hard Disk Error. I search for any solution in Mikrotik Forum, but there no fixed available for it in Forum. I must say that I want to install in this Hardware Standalone, not willi...
by kashifzai86
Tue Feb 09, 2021 8:03 am
Forum: General
Topic: CCR1036 replacement for x86 computing
Replies: 0
Views: 491

CCR1036 replacement for x86 computing

Currently I'm using CCR10036-8G-2S+ (in which I'm running service like pppoe server, dns server, cgnat 8000 sessions/rule + powerful firewall filters + no masquerade NAT rules define). Sometimes my cpu went to 30% to 50% overall, so I need suggestion about If I replaced this Mikrotik hardware to X86...
by kashifzai86
Tue Jan 05, 2021 2:10 pm
Forum: General
Topic: DDOS Rules when Connection tracking is Off
Replies: 9
Views: 2417

Re: DDOS Rules when Connection tracking is Off

Please see below link what I want to elaborate you. https://aacable.wordpress.com/2018/03/27/separating-natting-from-routing-in-mikrotik/ Your link provides the correct information: "When using Masquarade, RouterOS has to do full connection tracking recalculation on EACH interface connect/disc...
by kashifzai86
Mon Dec 28, 2020 2:24 pm
Forum: General
Topic: DDOS Rules when Connection tracking is Off
Replies: 9
Views: 2417

Re: DDOS Rules when Connection tracking is Off

Dear Chupaka (Sorry using yr short name)

How to rectify a user (whose IP is DDoS attackers list in mikrotik)??
by kashifzai86
Sun Dec 27, 2020 6:12 pm
Forum: General
Topic: DDOS Rules when Connection tracking is Off
Replies: 9
Views: 2417

Re: DDOS Rules when Connection tracking is Off

When connection tracking is off, RAW tab rules won't work
by kashifzai86
Sun Dec 27, 2020 12:02 pm
Forum: General
Topic: DDOS Rules when Connection tracking is Off
Replies: 9
Views: 2417

Re: DDOS Rules when Connection tracking is Off

I think I didn't elaborate my network completely, let me tell you everything I'm working as Mini ISP having 1500 users, I have 2 publics pools of /24 which are routed by main ISP through my these IPs 14.x.x.x/29 assigned by my ISP to my Mikrotik router (my router IPs are /29). So, my Edge router is ...
by kashifzai86
Thu Dec 24, 2020 10:34 am
Forum: General
Topic: DDOS Rules when Connection tracking is Off
Replies: 9
Views: 2417

DDOS Rules when Connection tracking is Off

I'm wondering how to place DDos Attack filter rules when Connection Tracking is Off on Mikrotik CCR-1036 as I'm using this router for Routing only and my rest of traffic is forwarding to CGNAT CCR-1009.

Anyone can help on it
by kashifzai86
Sat Nov 23, 2019 11:34 am
Forum: General
Topic: Routing & Natting possible on same Mikrotik??
Replies: 1
Views: 754

Routing & Natting possible on same Mikrotik??

Hello !!! Can someone help me ?? I have 254 public routable IPs assingned by my ISP, but I have more than 400 clients.. Can I use both Natting and Routing on same CCR Router. Example:- ISP IP: 11.11.11.1/29 CCR WAN: 11.11.11.2/29 Routed user IP Pool /24 sent to user by my pppoe: 12.12.12.0/24 (254 C...
by kashifzai86
Fri Nov 22, 2019 11:57 am
Forum: Beginner Basics
Topic: static ip forwording
Replies: 4
Views: 1280

Re: static ip forwording

try to Google it as " Mikrotik Proxy arp in WAN interface"

or check that post

viewtopic.php?t=4402
by kashifzai86
Wed Nov 13, 2019 9:05 pm
Forum: Forwarding Protocols
Topic: Issue assigning Public IPs to cleints
Replies: 10
Views: 3286

Re: Issue assigning Public IPs to cleints

Thanks dear 'sob' & 'MRTCA' for suggestions..
by kashifzai86
Wed Nov 13, 2019 4:57 pm
Forum: Beginner Basics
Topic: static ip forwording
Replies: 4
Views: 1280

Re: static ip forwording

Use PROXY-ARP on your mikrotik WAN Interface port
by kashifzai86
Wed Nov 13, 2019 4:54 pm
Forum: Forwarding Protocols
Topic: Issue assigning Public IPs to cleints
Replies: 10
Views: 3286

Re: Issue assigning Public IPs to cleints

Dear SOB

My thoughts are similar what you had told me, but my ISP not providing me more IP Space...Well hope will get any other possible options.
by kashifzai86
Wed Nov 13, 2019 4:52 pm
Forum: Forwarding Protocols
Topic: Issue assigning Public IPs to cleints
Replies: 10
Views: 3286

Re: Issue assigning Public IPs to cleints

Hello MRTCA

your posts commands and structure not works, Please suggest anything oR any butter workaround
by kashifzai86
Wed Nov 13, 2019 2:39 pm
Forum: Forwarding Protocols
Topic: Issue assigning Public IPs to cleints
Replies: 10
Views: 3286

Re: Issue assigning Public IPs to cleints

Thanks for your Reply..

Yes, I'm sure becoz, I'm using this PROXY-ARP from last 2 years and now I need to change this for Routing...

Tell what should I do, or any alternative possibility??
can I use OSPF without ISP provision??
by kashifzai86
Tue Nov 12, 2019 7:52 am
Forum: General
Topic: PubG Game Prioirtise
Replies: 2
Views: 3568

Re: PubG Game Prioirtise

Can you elaborate more in details??
by kashifzai86
Tue Nov 12, 2019 7:39 am
Forum: Forwarding Protocols
Topic: Issue assigning Public IPs to cleints
Replies: 10
Views: 3286

Issue assigning Public IPs to cleints

pic2.jpg I'm not new in Router OS, but from long time I'm working on NATTing, Now I have some issue regarding ROUTING public ip addressing to the clients. My network Diagram also attached with this topic, My ISP has assigned me 13.13.1.0/23 public IP pool (here pool assigned IPs are fake provided d...
by kashifzai86
Sat Oct 12, 2019 11:49 am
Forum: General
Topic: PubG Game Prioirtise
Replies: 2
Views: 3568

PubG Game Prioirtise

We are getting issue with PUBG Game, since we are using NATTing. Many time users complaint regarding increase in pings and Lags.

Is there any way to prioritize Games port or something like QoS???
by kashifzai86
Mon Apr 02, 2018 2:08 pm
Forum: General
Topic: Online game issue [SOLVED]
Replies: 11
Views: 3133

Re: Online game issue [SOLVED]

Dear Shavnary

Better & Long Lasting solution is to provide Real Ip / Public IP to those users whom are getting issue..

Use "Proxy-Arp" on your WAN Interface.. then release static Real IP to your these users.

Smile
Kashif Khan
by kashifzai86
Sat Nov 18, 2017 1:02 pm
Forum: General
Topic: Mikrotik Switches Vs Cisco Switches
Replies: 20
Views: 9824

Re: Mikrotik Switches Vs Cisco Switches

Thanks Kevin... for helping me to take appropriate decision. One more thing need to ask... I Google to find about the processing speed for Cisco & DELLPower Connect Series but I can't able to find about their processing speed as what it is easier in Mikroitk?? How we can differentiate that mikto...
by kashifzai86
Fri Nov 17, 2017 4:29 pm
Forum: General
Topic: Mikrotik Switches Vs Cisco Switches
Replies: 20
Views: 9824

Mikrotik Switches Vs Cisco Switches

Hello Guys !!! I'm using Cisco Switch 2960-TTL (10/100Mbps) from Long time (approx 3 years), now I'm trying to change vendor from Cisco to Mikrotik and willing to purchase (CRS326-24G-2S+RM OR CRS125-24G-1S-IN)... as there is less theoretical information available for Mikrotik... I need suggestion w...
by kashifzai86
Tue Sep 19, 2017 9:06 am
Forum: General
Topic: Mikrotik routing with NAT
Replies: 2
Views: 1253

Mikrotik routing with NAT

Hello I'm newbie with mikrotik, using CCR1009.. I have 50 client and using PPPoE for the client to Authenticate in Mikroitk with masquerade (using private IP i.e. 172.16.0.1/24).... Now, I have purchase 150.xxx.x.0/24 pool from my ISP having Gateway address 150.xxx.x.1/24... I tried to assign Puclic...
by kashifzai86
Mon Nov 09, 2015 9:05 am
Forum: General
Topic: x86 PC vs. MT RB1100AHx2
Replies: 11
Views: 4097

Re: x86 PC vs. MT RB1100AHx2

Well I'm also using x86 Machine (Core 2 dou @ 2.9Ghz, 2 Gb RAM).. I still confuse in between RB1100AHx2 and x86 PCs. I thought that RB1100AHx2 are designed for RISC Architecture (Reduced Instruction Sets computing) which make the processin gof data flow upto 1Million pps. While x86 PCs not get upto ...