Nope. The wifiwave2 package won't fit in its 16MB flash storage :/RBM11G + R11e-5HaxD would be a good combination !
https://help.mikrotik.com/docs/display/ ... l+OverviewWhere did get that info from?
The only real issue with the RBM33G is the small NAND. 16MB is insufficiant for the wave2 package[...]Which features or slots are missing on M33G? https://mikrotik.com/product/rbm33g[...]
Will you entertain the idea of a CAPSMANv1 Container, or a RouterOS Container limited to CAPSMANv1 and the relevant functionality?Unfortunately, it's unlikely that it will change.
The answer is: No.I've ordered a CSS326-24G-2S+RM which is not delivered, yet. Is MAC based VLAN via RADIUS possible in the meantime? This is a must have feature for me for access switches.
This. I'm guessing we'll be flooded with AX devices once CAPSMAN-Wave2 is done.I would be very surprised if MT wasn't working on AX versions of WISP gear. I suspect they are just working through the backlog of product announcements while trying to focus on ROSv7.
Could you give us some information regarding performance & CPU load?Here with outside wAPac connected to hAPac MACSEC on v7.6 beta 10 works flawlessly. Even with PoE turned off and on again.
but did you run it with root rights? Try again, with a "sudo" in front of it- "echo "1" > /sys/bus/pci/rescan" is tried
I‘d guess we’ll see it again in 7.3When will container support be added?
Afaik, there is no IPSEC HW acceleration yet on the RB5009. Thus, Wireguard is done in software.It appears my Wireguard setup is much slower on the RB5009 than on the RB4011, achieving only 150 Mbps to the same endpoint. Has anyone else experienced this issue?
They're available now:7.1beta6 changelog:7.1beta6 changelog:
!) added MLAG support for CRS3xx devices (CLI only);
No instruction yet
https://help.mikrotik.com/docs/display/ ... tion+GroupMmmm MLAG - sounds tasty.
Any hint on how this could be configured and how it is implemented between boxes?
thx!
The graph looks like it's rrdtool. Many monitoring systems use it. OpenNMS, LibreNMS, Cacti, Observium, ...What graphing software do you use?
Yes! This. It would make life quiet a bit easier.If not checkbox, then the CTRL + Click should on/off options.
Additional should be possible to use Mouse Scrool !.
I do that setup ones what is save in WinBox Session !. I have few sessions dedicate on differ platform/models.
/me looks forward to MUM-Europe-2020Soon(TM)
On a related note, the "go to first new post in thread" button seems to be missing.Is tapatalk not working? The plugin appears OK and is configured
Awesome! ThanksWe are researching ways how to implement MC-LAG
That was evil... well played!
https://mikrotik.com/product/crs317_1g_ ... estresultsMarvell 98DX8216
How much mpps can handle per second? does some one know ?
It‘s an SFP+ port, which requires SFP+ Gbics or Transceiver. The S+RJ10 should work.And why is the RJ01 not supported?
Nope. It's crapdoes Realtek RTL8367 manageable switch and support acl?
Where do you get this updates ?
Thanks in advance!
Rule of thumb: if it has more than one cpu core it will not run Metarouter.I should have said that I'd like to use MetaROUTER, which I think is not possible on arm yet? Does it work on PPC?
You can't always have it all I suppose.
Yes! +1, pretty please?Please, add support 802.1x for wire interfaces.
That one has me positively salivating as well.I am SO HAPPY !!!!
CRS354-48P-4S+2Q+
Thank you mikrotik.
confirmed, RouterBOOT upgrade installed ok on hAP ac². Upgraded from ROS 6.41.3 to 6.42rc49, then from RouterBOOT 6.41.3 to 6.42rc49 without any problems.*) routerboot - fixed RouterBOOT upgrade process (introduced in v6.42rc);
RB750Gr2 is no longer available though...He is talking about RB750Gr2 not RB750r2. Your link is bad
Very nice! Would love if this mechanic could be added to the other CSS/CRS RM models as well.The system runs silently, but there are two fans for situations where ambient temperature gets close to maximum. They will run automatically and only when it gets too hot.
Very much looking forward to this myself, too.The performance of the CPU for routing tasks will be published shortly on this page:
https://routerboard.com/CRS326-24G-2SplusRM
Do you already have a date for general availability? Pretty please?turnip, 24x Gigabit ports, 4 SFP+ 10Gigabit ports.
Does this fix the IPSEC packet re-ordering problem?*) ipsec - updated tilera classifier for UDP encapsulated ESP;
When it's done™Do anyone know when Mikrotik start RC ?
Picture shown in original post showed two LEDs with PSU1 and PSU2 next to them. That'll be a definitive yes.Finally, are there dual power supply options?
Switch from CBC to CTR.
Which AES algorithm did you choose? CBC, CTR or GCM?l2tp+ipsec aes256
With 40MHz channel width and 1 data stream you won't get 100Mbit of actual user data rate out of that 801.11ac P2P link.its 40 MHz. we are not getting bandwidth on 5MHz 10MHz and 20 MHz
And what channel width? 5MHz? 10MHz? 20MHz? 40? 80?chain 0 and chain 1 is activatedHow many chains are active? Which Channel width is used?
Connect via Winbox "Neighbours" to MAC Address of the device. Username and password remain the same.I screwed up setting. Can not connect to the unit. How can I reset the hAP AC? It is powered through POE.
It's being offered on that site for 250zl / 60€ / 65$ / 45£ plus tax.and price?Glad to see this. Any idea on actual release date? Shipments?
[edit] never mind, Question about release retracted. was already answered two days ago.wAP ac
Hoping they'll be available by may for some testing. Then deployment to the new sitewAP ac will ship to distributors in second half of april, approximately
Would that be TCP or UDP testing with iperf? And with how many concurrent data connections?With MTU=9000 on both server and machine side, speed is now 12.5Gbit/s.