Community discussions

MikroTik App

Search found 82 matches

by GiovanniG
Mon Sep 20, 2021 9:20 pm
Forum: Wireless Networking
Topic: DIfferent access list for each Cap [SOLVED]
Replies: 6
Views: 483

Re: DIfferent access list for each Cap [SOLVED]

If you use create enable... You can actually set channels and power levels per AP. Thanks, I don't remember when I read the first time the CPAs guide long time ago, but I do remember they suggested to use dynamic, and I always did like that.. but honestly know I don't know the meaning, having them ...
by GiovanniG
Fri Sep 17, 2021 8:37 pm
Forum: Wireless Networking
Topic: I have enabled CAPs on 2.1GHz and can't enable it on 5GHz
Replies: 5
Views: 318

Re: I have enabled CAPs on 2.1GHz and can't enable it on 5GHz

thanks, wow I couldn't expct even that ) Is it possible to have a one capsman on first router, then connect the 2.4GHz wifi of the second router to it but at the same time create another capsman on the second router to manage its 5GHz and another 5GHz third router? Is it just necessary to specify th...
by GiovanniG
Fri Sep 17, 2021 5:27 pm
Forum: Wireless Networking
Topic: I have enabled CAPs on 2.1GHz and can't enable it on 5GHz
Replies: 5
Views: 318

Re: I have enabled CAPs on 2.1GHz and can't enable it on 5GHz

Sure,
I can select only one interface, I can I enable CAPs to the other one?
by GiovanniG
Fri Sep 17, 2021 5:04 pm
Forum: Wireless Networking
Topic: DIfferent access list for each Cap [SOLVED]
Replies: 6
Views: 483

Re: DIfferent access list for each Cap [SOLVED]

thank you a lot for your kind answer :)
Sincerely now I don't see more the reason to use dynamic, I don't need to release resurces (if it is the meaning to use dynamic) so I'll only use create enable.
by GiovanniG
Fri Sep 17, 2021 4:55 pm
Forum: Wireless Networking
Topic: I have enabled CAPs on 2.1GHz and can't enable it on 5GHz
Replies: 5
Views: 318

I have enabled CAPs on 2.1GHz and can't enable it on 5GHz

Hi I've a AC2 router with latest 6.48.4, when I enable CAPs (as slave) I should select interface, and I can't select both (2.1+5GHz), it is possible to solve it?
Thanks
by GiovanniG
Thu Sep 16, 2021 10:05 pm
Forum: Wireless Networking
Topic: DIfferent access list for each Cap [SOLVED]
Replies: 6
Views: 483

Re: DIfferent access list for each Cap [SOLVED]

You will most likely need to make sure your provisioning rules are set to create enabled and not create dynamic enabled before setting up the access rules. Thank you, I've found the interfaces including caps, so ok it should be easy. Sorry I haven't noticed it before. Please tell me what is the dif...
by GiovanniG
Thu Sep 16, 2021 1:36 pm
Forum: Wireless Networking
Topic: DIfferent access list for each Cap [SOLVED]
Replies: 6
Views: 483

DIfferent access list for each Cap [SOLVED]

Hi, I consider access list a powerful instrument when the devices are that unwise to avoid conntecting to a more reliable/powerful AP, but this is a general option, which doesn't suite my case completely. I've 3 access points under same Capsman, one external that I'd like to keep weak signals connec...
by GiovanniG
Sat Aug 07, 2021 2:40 pm
Forum: General
Topic: How can I deep debug a 100% CPU load [SOLVED]
Replies: 4
Views: 546

Re: How can I deep debug a 100% CPU load [SOLVED]

/tool profile
Will be your best help with this.

By chance do you have capsman forwarding enabled? This is a low end CPU and it would be no surprise to see such an issue there.
Thanks, this what was I'm looking now, I'll check it when it will happen again
by GiovanniG
Sat Aug 07, 2021 2:36 pm
Forum: General
Topic: How can I deep debug a 100% CPU load [SOLVED]
Replies: 4
Views: 546

Re: How can I deep debug a 100% CPU load [SOLVED]

but why? It has no sense.. if the average load is little, it sould work fine. THere is a simple problem in FW, something is happening wrong in some circustamces. The caps working fine providing roaming and full bandwith with low cpu level.
This is the log:
by GiovanniG
Sat Aug 07, 2021 2:29 pm
Forum: General
Topic: How can I deep debug a 100% CPU load [SOLVED]
Replies: 4
Views: 546

How can I deep debug a 100% CPU load [SOLVED]

Hi, I have a small hap lite to manage a 3 router in Caps, usually the average load is 2%, ram is fine, FW 6.48.3. From the log I see caps disconnection, just after the login via Winbox, maybe the problem occours when the system is trying to summarize the status of ther router and send it to me. But ...
by GiovanniG
Wed Jul 28, 2021 11:21 pm
Forum: Wireless Networking
Topic: How to make CAPs with 2 SSID in different IP domains
Replies: 5
Views: 1596

Re: How to make CAPs with 2 SSID in different IP domains

Sorry, why? It works fine, cpu level still low and all resources are ok. It's just a small restaurant for about 30 persons max, and most of them won't need wifi
by GiovanniG
Wed Jul 28, 2021 5:00 pm
Forum: General
Topic: If I create VLAN will I loose management on remote router?
Replies: 1
Views: 538

Re: If I create VLAN will I loose management on remote router?

For those who may have the same question, there is no need to create VLAN to make a second IP domain working as a slave on caps, the caps protocol use an encapsluation, it's able to transport infos regardless of their IP address, so keep all APs on the same subnet and work with bridges only on Capsm...
by GiovanniG
Wed Jul 28, 2021 4:50 pm
Forum: General
Topic: Limit band on NAT rule, or in another way
Replies: 0
Views: 466

Limit band on NAT rule, or in another way

Hi mates, I've this situation: a Capsman and 2 CAPs AP, all 3 are in the same LAN broadcast/subnet, there is a slave SSID for guests, it is provisioned on a second bridge (present only on capsman), which support a local DHCP. On datapaths for guests I allowed client to client forwarding but I disabl...
by GiovanniG
Wed Jul 28, 2021 4:17 pm
Forum: Wireless Networking
Topic: How to make CAPs with 2 SSID in different IP domains
Replies: 5
Views: 1596

Re: How to make CAPs with 2 SSID in different IP domains

Hi, this post is almost dated one year, since this time my client was running with only the main Capsman serving the public WiFi, and APs servicing only the WiFi for staff, when I enabled public WiFi they don't let more clients connecting in both SSID. I've lot many hours trying figure out, and afte...
by GiovanniG
Mon Jul 26, 2021 9:42 pm
Forum: Wireless Networking
Topic: Can't add the second ap to capsman
Replies: 8
Views: 860

Re: Can't add the second ap to capsman

Mate, don't hate me, I have no clue how to prepare a file and send it, I'm not having the problem now and I don't know how to reproduce it. I can just stay that changes made on caps won't have effect if there was an "error" (actually not error, just not complete cap handshaking, keeping on...
by GiovanniG
Mon Jul 26, 2021 1:46 am
Forum: Wireless Networking
Topic: Can't add the second ap to capsman
Replies: 8
Views: 860

Re: Can't add the second ap to capsman

I solved removing the ap2 entry in the "CAP Interface", disabling and renabling Capsman I've seen on both caps a DSMB. By the time I did several canges, like disabling all drops on firewall, remove wlan from bridge, and many more changes. I consider this a bug of Mikrotik FW, since the CAP...
by GiovanniG
Mon Jul 26, 2021 1:07 am
Forum: Wireless Networking
Topic: Can't add the second ap to capsman
Replies: 8
Views: 860

Re: Can't add the second ap to capsman

Now I have the Bridge with the same MAC of ethernet, I suppose that the capsman replies to ethernet MAC and the ap2 cap isn't receiving the expected packets. Sincerely I can't figure out why in the beginning it connects, but after doesn't work. Also paramentes like SSID, fequency etc aren't passed t...
by GiovanniG
Sun Jul 25, 2021 11:31 pm
Forum: Wireless Networking
Topic: Can't add the second ap to capsman
Replies: 8
Views: 860

Re: Can't add the second ap to capsman

I suppose I need to force the bridge using another MAC, but how? Maybe by terminal? Is it safe to do? PS: I've also created the role in ap2 firewall to accept udp packets from capsman (and put the role on position1) as well on capsman to enable receive udp from ap2, no effect PS2: on ap2 I have &quo...
by GiovanniG
Sun Jul 25, 2021 11:31 pm
Forum: Wireless Networking
Topic: Can't add the second ap to capsman
Replies: 8
Views: 860

Re: Can't add the second ap to capsman

I've checked the video, nothing new for me there, my problem is more deep than standard configuration, I mean I don't know why the second ap is not getting the proper config from capsman, in the RemoteCAP I see the IP address of the second ap instead of the MAC, as I see for the ap1. I guess the pro...
by GiovanniG
Sun Jul 25, 2021 9:40 pm
Forum: General
Topic: recover a Mikrotik over another Mikrotik (same LAN) [SOLVED]
Replies: 8
Views: 638

Re: recover a Mikrotik over another Mikrotik (same LAN) [SOLVED]

IF you do not have rebooted the router do /undo , and wait some seconds, sometimes, on router terminal until go back online as before... thank you mate, this is a precious post! :)) I've done it and I got it back, I hope the previous config is now automatically stored and if a reboot accours it wil...
by GiovanniG
Sat Jul 24, 2021 10:34 pm
Forum: General
Topic: recover a Mikrotik over another Mikrotik (same LAN) [SOLVED]
Replies: 8
Views: 638

Re: recover a Mikrotik over another Mikrotik (same LAN) [SOLVED]

You gave me the idea, cool! I've never telnet a mac address! )) it opens, I've dumped the config, what I should change to revive it? Thank you! [admin@MikroTik] > export # jan/07/1970 06:47:35 by RouterOS 6.47.10 # software id = 6W5F-6GYH # # model = RouterBOARD wAP 2nD r2 # serial number = 6D820D3B...
by GiovanniG
Sat Jul 24, 2021 10:27 pm
Forum: General
Topic: recover a Mikrotik over another Mikrotik (same LAN) [SOLVED]
Replies: 8
Views: 638

Re: recover a Mikrotik over another Mikrotik (same LAN) [SOLVED]

thansk a lot of answer, I've googled and print the neighbors, the target unreachabel router is 192.68.88.3 [admin@MikroTik] /ip neighbor> find [admin@MikroTik] /ip neighbor> print # INTERFACE ADDRESS MAC-ADDRESS 0 ether2... 192.168.88.2 2C:C8:1B:22:81:DD bridge 1 ether2... 192.168.88.2 2C:C8:1B:22:8...
by GiovanniG
Sat Jul 24, 2021 8:57 pm
Forum: General
Topic: recover a Mikrotik over another Mikrotik (same LAN) [SOLVED]
Replies: 8
Views: 638

Re: recover a Mikrotik over another Mikrotik (same LAN) [SOLVED]

I've found telnet on istruments, unfortunately it doesn't answer from the local IPs too (((( but it replies to pings.
I guess I have no other chance than reset it. The problem is that this place is located 3 hours by car far from me :(
by GiovanniG
Sat Jul 24, 2021 8:44 pm
Forum: General
Topic: recover a Mikrotik over another Mikrotik (same LAN) [SOLVED]
Replies: 8
Views: 638

recover a Mikrotik over another Mikrotik (same LAN) [SOLVED]

Hi, trying to solve a problem remotely (WInbox) on Caps protocol I've unfortunately changed a wrong parameter on firewall, not the router isn't more available on internet but I guess it works fine if the source is located on the same LAN. I've access through Winbox on another Mikrotik on the same LA...
by GiovanniG
Sat Jul 24, 2021 4:52 pm
Forum: Wireless Networking
Topic: Can't add the second ap to capsman
Replies: 8
Views: 860

Re: Can't add the second ap to capsman

Is it possible that the second AP (which is a RBWAP2ND), needs different Firewall parameters as firtst AP? (which is a hAP ac2). I've declared the ethernet nterface as LAN and actually the firewall parameters are the sams between APs..
by GiovanniG
Sat Jul 24, 2021 4:42 pm
Forum: Wireless Networking
Topic: Can't add the second ap to capsman
Replies: 8
Views: 860

Can't add the second ap to capsman

Hi friends, I've almost tried everything on my knowledge, the second AP stil on MB status, the parameters are the same for the first AP but it doesn't run. It connects to capman but not possibile to connect to that AP. There is the master CapsMAN .88.1, the first AP .88.2 and the second AP .88.3 Her...
by GiovanniG
Tue Jun 08, 2021 1:17 pm
Forum: General
Topic: Can't enable both 2.4 and 5GHz with CAPS
Replies: 5
Views: 500

Re: Can't enable both 2.4 and 5GHz with CAPS

Another question, configuring CAPSman on 5GHz ch there are much less parameters available than configuring it directly on AP.
Image
by GiovanniG
Tue Jun 08, 2021 1:11 pm
Forum: General
Topic: Can't enable both 2.4 and 5GHz with CAPS
Replies: 5
Views: 500

Can't enable both 2.4 and 5GHz with CAPS

HI, that's a strange problem, configuration is done, both frequencies work with CAPS but not together, when I press the CAP putton under wireless interface it impose me to choose which interface, and I can't select both of them. Conseguentely I can see on CAPSman only the 2.4 (if I choose wlan1) or ...
by GiovanniG
Thu Apr 08, 2021 11:14 am
Forum: RouterBOARD hardware
Topic: What exactly is the "RJ11 passthrough" in wsAP?
Replies: 3
Views: 992

Re: What exactly is the "RJ11 passthrough" in wsAP?

Thank you, now it's perfectly clear ) I've downloaded some docs about this wrouter but I couldn't find those infos.
by GiovanniG
Thu Apr 08, 2021 1:40 am
Forum: RouterBOARD hardware
Topic: What exactly is the "RJ11 passthrough" in wsAP?
Replies: 3
Views: 992

What exactly is the "RJ11 passthrough" in wsAP?

Hi! I've searched around but I can't figure it out yet.. what does that mean? It's written it is made to reduce the cabling and to connect a old fixed phone.. then I have a couple of ideas: 1) Does this port is directly connected to one of the 2 free pairs of the main ethernet cable, to bring the te...
by GiovanniG
Fri Feb 19, 2021 12:03 am
Forum: General
Topic: Help on wiring solution
Replies: 18
Views: 1566

Re: Help on wiring solution

Thank you Sindy for your lovely post, I promise to focus on it deeply soon, now it's late and I go sleep. Seems I have different ways to create my way, and VLAN on switch is the thing that scary me less, first Ill try with direct wires and eventually later insert a switch between them. I need to try...
by GiovanniG
Thu Feb 18, 2021 9:31 pm
Forum: General
Topic: Help on wiring solution
Replies: 18
Views: 1566

Re: Help on wiring solution

Hi, I hope somebody can give me some sogguestions, thank you
by GiovanniG
Tue Feb 02, 2021 4:56 pm
Forum: General
Topic: Help on wiring solution
Replies: 18
Views: 1566

Re: Help on wiring solution

I kindly need help, I'm not sure if I understood ok, on the CAPSMAN I?ve to create a new bridge and assign it to a VLAN (while for the office subnet I won't do nothing), configure lsave SSID on CAPs settings to that brigde.. and create a NAT between networks to allow internet to the VLAN bridge.. SO...
by GiovanniG
Tue Feb 02, 2021 2:52 am
Forum: General
Topic: Help on wiring solution
Replies: 18
Views: 1566

Re: Help on wiring solution

May you please explain me better? Thank you a lot!
by GiovanniG
Fri Jan 29, 2021 10:18 am
Forum: General
Topic: Help on wiring solution
Replies: 18
Views: 1566

Re: Help on wiring solution

Thanks for answer, sorry mate my english is not good enough to undrestand well you.. You suggested me to use VLAN everywhere? eth1 and eth2 of the CAPSMAN with VLAN? Connected directly to the internet provider? And all other CAPS with VLAN too? Why I need to use VLAN? Can I have all working without ...
by GiovanniG
Thu Jan 28, 2021 11:00 pm
Forum: General
Topic: Help on wiring solution
Replies: 18
Views: 1566

Re: Help on wiring solution

I'm really glad for your kind help! Yes yoi said something wise.. I can't have 2 subnets running on one link due of DHCP issues.. so my question is, can we forget about VLANs and consider this circuit: conf2.jpg The CAPSMAN router is connected with eth1 to the switch, as all other CAPs, and on eth2 ...
by GiovanniG
Thu Jan 28, 2021 12:38 pm
Forum: General
Topic: Help on wiring solution
Replies: 18
Views: 1566

Re: Help on wiring solution

I'm asking kind soul to help me showing the right way, thanks
by GiovanniG
Tue Jan 26, 2021 11:28 pm
Forum: General
Topic: Help on wiring solution
Replies: 18
Views: 1566

Re: Help on wiring solution

Thanks for answer, why only an expert with long training can do that? Why the process can't be described here? I can test it but I just need a basic guide.. which is the right way I need to follow to reach the goal. I need 2 SSID managed by capsman, each SSID should broadcast a different IP domain, ...
by GiovanniG
Mon Jan 25, 2021 11:01 pm
Forum: General
Topic: Help on wiring solution
Replies: 18
Views: 1566

Re: Help on wiring solution

Thanks for answer, the internet router will provide 2 subnets on one link (I think that is possible) with 2 gateways, one is for office, second (filtered by authorization) for guests. So you tell me I can avoid use VLAN, on CAPSMAN I can connect only ethernet1 to the main switch, assign every IP sub...
by GiovanniG
Mon Jan 25, 2021 7:01 pm
Forum: General
Topic: Help on wiring solution
Replies: 18
Views: 1566

Re: Help on wiring solution

I've just read that an unmanaged switch will not accept VLAN packets since they are 4 bytes bigger than standard, so the last solution will not be possible. I'll buy a 8 port router in case I need more than 4 edge hotspots. By the way, should I really need to use VLANs in such process? 2 different I...
by GiovanniG
Mon Jan 25, 2021 6:45 pm
Forum: General
Topic: Help on wiring solution
Replies: 18
Views: 1566

Help on wiring solution

Hi, I need to build up a network for a restaurant, it consist of internet access, a main switch where all terminals/office PC are connected and hotspots. Each hotspot should broadcast the main local office network, plus it needs provide internet access for guests. For guret access there will be nece...
by GiovanniG
Mon Aug 24, 2020 11:45 pm
Forum: General
Topic: If I create VLAN will I loose management on remote router?
Replies: 1
Views: 538

If I create VLAN will I loose management on remote router?

Hi, it's a bit hard here to receive support, I'm sorry for this, I'm trying to figure out myself but I'm afaraid to lose control of remote host, and I?m no tin the place to eventually fix it. I guess that for create CAPS with different SSID connected to different IP domains I need VLAN, now I read t...
by GiovanniG
Sat Aug 22, 2020 1:06 am
Forum: Wireless Networking
Topic: How to make CAPs with 2 SSID in different IP domains
Replies: 5
Views: 1596

Re: How to make CAPs with 2 SSID in different IP domains

Is this 6.45.9 version working ok? I choose it because it is "long", the most stable, but I've experience already a couple of spontaneous reboot (log went out of order for the time usual it takes to reboot, I was busy to check logs and now the log is over). After disable the public profile...
by GiovanniG
Sat Aug 22, 2020 12:15 am
Forum: Wireless Networking
Topic: How to make CAPs with 2 SSID in different IP domains
Replies: 5
Views: 1596

How to make CAPs with 2 SSID in different IP domains

Hi, I've tried myself and spent many hours, but I'm a disaster. I need to create 2 SSID, one for internal private network, the second for public/guests, with bandiwith limitation and that will not access to the private network. For this purposes I setup a CAPs with two satellite routers connected di...
by GiovanniG
Fri Aug 21, 2020 5:06 pm
Forum: General
Topic: I can't see traffic on the NAT, it uses the main bridge
Replies: 6
Views: 1123

Re: I can't see traffic on the NAT, it uses the main bridge

Actually this rule works, I can't access any IP of network .88 from oublic 10.0. my problem is another as I described, I can't limit the bandwidth of NAT or limit the bandwidth of public bridge. How? Thank you
by GiovanniG
Fri Aug 21, 2020 10:59 am
Forum: General
Topic: I can't see traffic on the NAT, it uses the main bridge
Replies: 6
Views: 1123

Re: I can't see traffic on the NAT, it uses the main bridge

Hi, teorically, why I need vlans? Caps should work like a vlan for different bridges, yes? The important is on the main router and without NAT the bridge public will not access internet. The problemmis that I don't need traffic in that nat, neither in bridge public, why? Fast track? The purpose is t...
by GiovanniG
Thu Aug 20, 2020 11:09 pm
Forum: General
Topic: I can't see traffic on the NAT, it uses the main bridge
Replies: 6
Views: 1123

Re: I can't see traffic on the NAT, it uses the main bridge

Thank you for answer, sorry for delay I haven't enabled the subscritpion here: # aug/20/2020 23:07:05 by RouterOS 6.45.9 # software id = SA7S-N6BA # # model = RB941-2nD # serial number = A1C30ABEA2ED /caps-man channel add band=2ghz-b/g/n control-channel-width=20mhz frequency=2412 name=ch1 add band=2...
by GiovanniG
Thu Aug 20, 2020 11:05 pm
Forum: Wireless Networking
Topic: disconnected, registered to other interface
Replies: 1
Views: 1117

disconnected, registered to other interface

My CAPs doesn't work good, and I want to know if there is a proble with routers or stupid device that loves to "flipping" between network without sense. 1) What cases are when this log appear? 2)There is any resposibility of Mikrotik? 3) There is anything I can special setting on Mikrotik ...
by GiovanniG
Sun Aug 16, 2020 8:35 pm
Forum: General
Topic: I can't see traffic on the NAT, it uses the main bridge
Replies: 6
Views: 1123

I can't see traffic on the NAT, it uses the main bridge

Hi, I have one Mikrotik as CAPman, there are 2 SSID, the second is based on another brigde (le'ts call it bridge1), there is a DCHP and a NAT which suppose to route everything from the bridge1 to the default bridge. It works but I can't see the traffic on the NAT, it looks it does the first NAT and ...
by GiovanniG
Fri Aug 14, 2020 7:33 pm
Forum: Wireless Networking
Topic: HELP: CAPSMAN reduce bandwith/QoS
Replies: 11
Views: 4748

Re: HELP: CAPSMAN reduce bandwith/QoS

Thank you for reply, this topic doesn't work, I'll create 2 of them more specific, let's see
by GiovanniG
Fri Aug 14, 2020 11:55 am
Forum: Wireless Networking
Topic: HELP: CAPSMAN reduce bandwith/QoS
Replies: 11
Views: 4748

Re: HELP: CAPSMAN reduce bandwith/QoS

thank you for your kind help
by GiovanniG
Tue Aug 11, 2020 10:14 am
Forum: Wireless Networking
Topic: HELP: CAPSMAN reduce bandwith/QoS
Replies: 11
Views: 4748

Re: HELP: CAPSMAN reduce bandwith/QoS

Can someone please tell me how to reduce bandwidth? Thank you a lot
by GiovanniG
Sun Aug 09, 2020 4:03 pm
Forum: Wireless Networking
Topic: HELP: CAPSMAN reduce bandwith/QoS
Replies: 11
Views: 4748

Re: HELP: CAPSMAN reduce bandwith/QoS

Help, thank you
by GiovanniG
Thu Aug 06, 2020 5:35 pm
Forum: Wireless Networking
Topic: HELP: CAPSMAN reduce bandwith/QoS
Replies: 11
Views: 4748

Re: HELP: CAPSMAN reduce bandwith/QoS

Please help, thank you
by GiovanniG
Wed Aug 05, 2020 3:10 pm
Forum: Wireless Networking
Topic: HELP: CAPSMAN reduce bandwith/QoS
Replies: 11
Views: 4748

Re: CAPSMAN reduce bandwith/QoS

Hi, I hope someone may kindly help here, finally I succeded to create CAPs and 2 different SSID, the main is based on the bridge, the same IP domain of the main router and where each mikrotik has its loopback ip address, the second CAPs SSID is based on a new bridge for public internet WiFi, where t...
by GiovanniG
Sun Aug 02, 2020 11:32 pm
Forum: General
Topic: URGENT: Capsman not working (MB only, I guess certficate problem)
Replies: 5
Views: 1766

Re: URGENT: Capsman not working (MB only, I guess certficate problem)

I had lot of difficulties to set CAPSMAN, they went registered and after couple of seconds not more, I can't say now if it was a problem with firewall (I enabled UDP incoming packets from CAPs (on CAPSMAN) and CAPSMAN (on CAPS), or with the config tabs which weren't fllled as I supposed they were (a...
by GiovanniG
Sun Aug 02, 2020 11:00 pm
Forum: General
Topic: HELP: CAPSMAN with different IP domain
Replies: 5
Views: 1399

Re: HELP: CAPSMAN with different IP domain

i've tried a souce nat chain, src addr: 10.0.0.0/22, out interface: bridge, connection rate: 10M, action src-nat to address: the desidered one. But I need to wait tomorrow to test it
by GiovanniG
Sun Aug 02, 2020 10:33 pm
Forum: General
Topic: HELP: CAPSMAN with different IP domain
Replies: 5
Views: 1399

Re: HELP: CAPSMAN with different IP domain

I have 2 NATs, one is the default masquerade, (with OUT interface WAN), the other is what I created to nat any request from the new network to the old one. There is something I don't understand, the masqueade default seems NATting but it's set to use the WAN, and the ethernet 1 wan port is not conne...
by GiovanniG
Sun Aug 02, 2020 7:20 pm
Forum: General
Topic: HELP: CAPSMAN with different IP domain
Replies: 5
Views: 1399

Re: HELP: CAPSMAN with different IP domain

Thank you, it works :) Exactly I used local-forwarding=no and it suddenly worked, there is no reasons for VLAN since CAPS are connected directly to CAPSman. I've created a new IP on the CAPSman and NATted on it the new bridge, on the new bridge I created a DCHP, that's all. Interesting to know how C...
by GiovanniG
Sun Aug 02, 2020 11:21 am
Forum: General
Topic: HELP: CAPSMAN with different IP domain
Replies: 5
Views: 1399

HELP: CAPSMAN with different IP domain

It is possible to create another SSID with another IP domain on a remote CAPS? How to proceed with it? Is it just necessary do create a second bridge on the CAP manager and assign this new bridge to the configs containing the second ssid? The second ssid should be slave of the first one? Or it is ne...
by GiovanniG
Sat Aug 01, 2020 11:50 pm
Forum: General
Topic: URGENT: Capsman not working (MB only, I guess certficate problem)
Replies: 5
Views: 1766

Re: URGENT: Capsman not working (MB only, I guess certficate problem)

I still have problems, remote CAPS go to SMB, not running, and on the Remote CAP I see the MAC address instead of IP addresses, I'm not 100% sure but I think when it's working I see here the IP address! Sometime it was working, I believe the problems with these f* certificates (( (which I don't need...
by GiovanniG
Wed Jul 29, 2020 1:59 pm
Forum: Wireless Networking
Topic: HELP: CAPSMAN reduce bandwith/QoS
Replies: 11
Views: 4748

Re: CAPSMAN reduce bandwith/QoS

Thnak you for your kind answer, - it seems a rb941-2nd will not be able to managa about 30 megabit (max) of traffic on CAPSMAN yes? - What about the solutions of fixed bandith reduction for public or QoS? May the fixed solves the CPU limitations? - Cosnidering the following scheme, where circles are...
by GiovanniG
Mon Jul 27, 2020 10:26 pm
Forum: Wireless Networking
Topic: HELP: CAPSMAN reduce bandwith/QoS
Replies: 11
Views: 4748

HELP: CAPSMAN reduce bandwith/QoS

EDIT: to avoid create another topic I suggest you to read directly the last post, https://forum.mikrotik.com/viewtopic.php?f=7&t=164248&p=809469#p809469 HERE[/url], thanks a lot Hi, I'm going to face soon a problem and I would like to read your suggestions about, thank you in advance for thi...
by GiovanniG
Tue May 19, 2020 12:23 pm
Forum: General
Topic: Solution needed: router PoE + WIreless
Replies: 6
Views: 1647

Re: Solution needed: router PoE + WIreless

Thank you a lot! Now it's clear, to reduce costs it's more convenient for me to buy a RB941-2nD hAP lite which should be enough for home usage and a Dahua PoE switch (the same brand of doorbells) to manage power correctly in any conditions that may happen in future. As RB941-2nD hAP lite is very sma...
by GiovanniG
Sun May 17, 2020 11:20 pm
Forum: General
Topic: Solution needed: router PoE + WIreless
Replies: 6
Views: 1647

Re: Solution needed: router PoE + WIreless

Thank you a lot for your precious help! Very good infos, let me go deeper with that, the PoE system is well projected and consider all possible situations to avoid any damage, the device will test in every port some conditions between wires before give out the power, which occurrs after some time, c...
by GiovanniG
Sat May 16, 2020 2:06 pm
Forum: General
Topic: Solution needed: router PoE + WIreless
Replies: 6
Views: 1647

Re: Solution needed: router PoE + WIreless

May someone kindly help me? Thank you!
by GiovanniG
Thu May 14, 2020 12:48 am
Forum: General
Topic: Solution needed: router PoE + WIreless
Replies: 6
Views: 1647

Solution needed: router PoE + WIreless

Hi mates, I have a Dahua doorbell system, 2 doorbells need PoE 802.3af (few watts), 1 monitor which needs 12Volt (I'll just wire 1-2-3-6 ethernt pins) and one wireless cAP lite AP which needs PoE too. I think the good solution is to buy RB750UPr2 but I'm not really sure about it, I have some questio...
by GiovanniG
Thu Apr 23, 2020 6:06 pm
Forum: General
Topic: Can't access NAT of the same network
Replies: 4
Views: 1741

Re: Can't access NAT of the sae network

thank you for your kind answer, which configuration I need to add?
Becuse there are mobile terminals that connects on LTE, but when under wifi it's better to use wifi.. and without change the address.
If we use a classic router, it works, so I was thinking it won't be that complicated
by GiovanniG
Thu Apr 23, 2020 3:55 pm
Forum: General
Topic: Can't access NAT of the same network
Replies: 4
Views: 1741

Can't access NAT of the same network

Hi, it's strange situation, I've different networks on a router, for each one I have some NATs on public IP, if I try to access the publicaddress:natport-on the network A from network A it doesn' work, from network B and C yes. The same for network B, if I try to access the publicaddress:natport-on ...
by GiovanniG
Wed Mar 11, 2020 6:12 pm
Forum: General
Topic: How can I change the internet gateway metric? [SOLVED]
Replies: 11
Views: 4647

Re: How can I change the internet gateway metric? [SOLVED]

Thank you, you opened my eyes on the next hop mistake, I've just corrected it and woute worked, suddenly I've got answer from host on network D! I'll leave the config like I did but I?ll try to answer your questions, inside your quote: Hi, I'm a bit confused with the complexity of your settings 1. I...
by GiovanniG
Wed Mar 11, 2020 1:36 am
Forum: General
Topic: How can I change the internet gateway metric? [SOLVED]
Replies: 11
Views: 4647

Re: How can I change the internet gateway metric? [SOLVED]

Thank you a lot for your patience ) tomorrow I'll try it.
Reading you I understood a stupid mistake I did, to which Mac address should the mikrotik direct the subnet D packet? This is not an answer that ARP table of network C can tell, I forgot to specify the next hop.
I'll post soon )
by GiovanniG
Tue Mar 10, 2020 1:37 pm
Forum: General
Topic: How can I change the internet gateway metric? [SOLVED]
Replies: 11
Views: 4647

Re: How can I change the internet gateway metric? [SOLVED]

Thank you for answer, when I've made srcnat I chould specify a protocol, the field was in red, and I typed tcp. ICMP wasn't in the list, I don't now why.. Yes I've confirmed you I typed as gateway the Mikrotik IP address I assigned for Eth 5, the one I'm using to NAT to the C subnet, and there it wo...
by GiovanniG
Tue Mar 10, 2020 12:46 am
Forum: General
Topic: How can I change the internet gateway metric? [SOLVED]
Replies: 11
Views: 4647

Re: How can I change the internet gateway metric? [SOLVED]

Thank you all mates for your kind replies :) I attach the scheme I hope you only added an IP route to the D network not a source NAT to a D network address. The source NAT should still translate to a C network address to reach the D network adress. source = A network address - NAT - C network addres...
by GiovanniG
Mon Mar 09, 2020 5:09 pm
Forum: General
Topic: How can I change the internet gateway metric? [SOLVED]
Replies: 11
Views: 4647

Re: How can I change the internet gateway metric? [SOLVED]

Hopefull somebody may help, thank you
by GiovanniG
Fri Mar 06, 2020 1:27 am
Forum: General
Topic: How can I change the internet gateway metric? [SOLVED]
Replies: 11
Views: 4647

How can I change the internet gateway metric? [SOLVED]

Hi mates, I have a particular situation, let's call the local subnet A, the internet subnet (ethernet1) B, and another local network (ethernet5) C. The network C is the network of videosurveillance, which has another internet gateway, instead of reaching it passing through internet providers I've de...
by GiovanniG
Mon Oct 21, 2019 5:37 pm
Forum: Beginner Basics
Topic: RB952Ui-5ac2nD + RB941-2nD with CAPsMAN
Replies: 3
Views: 1056

Re: RB952Ui-5ac2nD + RB941-2nD with CAPsMAN

Thank you! What about the second question.. to configure them as a simple bridge WiFi for the local LAN?
I suppose it can be possible using not the WAN port but another LAN port, disable the DCHP. True?
by GiovanniG
Mon Oct 21, 2019 3:10 pm
Forum: Beginner Basics
Topic: RB952Ui-5ac2nD + RB941-2nD with CAPsMAN
Replies: 3
Views: 1056

RB952Ui-5ac2nD + RB941-2nD with CAPsMAN

Hi friends, thank you for your support! I'm a beginner with Mikrotik and I need a suggestion from an expert, my client actually has a RB952Ui-5ac2nD as a internet router with wifi, the room he wants to serve is too big and on 2 floors for this router, I would like to buy another Mikrotik and extend ...
by GiovanniG
Fri Sep 06, 2019 6:13 am
Forum: Beginner Basics
Topic: Change DDNS name (Mikrotik cloud)
Replies: 11
Views: 5376

Re: Change DDNS name (Mikrotik cloud)

I guess it became a political topic )) On my point of view it's a really good useful feature to chose a name on Mikrotik cloud, I don't have to read it back somewhere to remember it. Asus does, and no one complained with them about, I guess too a Mikrotik router is enough protected to consider it sa...
by GiovanniG
Thu Sep 05, 2019 6:41 pm
Forum: Beginner Basics
Topic: Change DDNS name (Mikrotik cloud)
Replies: 11
Views: 5376

Re: Change DDNS name (Mikrotik cloud)

Unfortunately those DDNS services became all on payment, if not they will work for 30 days only, and after you have to confirm renovation by email. I love ASUS routers because you add any available DDNS and press save button, yes that's all! DO you want "mycomanyname.asuscomm.com"? if not ...
by GiovanniG
Thu Sep 05, 2019 11:50 am
Forum: Beginner Basics
Topic: Change DDNS name (Mikrotik cloud)
Replies: 11
Views: 5376

Re: Change DDNS name (Mikrotik cloud)

Thank you for your kind answer. I hope one day MIkrotik may enable the name editing, like ASUS does already for its routers. I don't see reasons to don't let us do it..
by GiovanniG
Wed Sep 04, 2019 10:51 pm
Forum: Beginner Basics
Topic: Change DDNS name (Mikrotik cloud)
Replies: 11
Views: 5376

Change DDNS name (Mikrotik cloud)

Hi, I'm glad Mikrotik gave us a free DDNS service, really useful. I read this guide: https://wiki.mikrotik.com/wiki/Manual:IP/Cloud#DDNS Can I change the dns-name? IN the example there is this: dns-name: 529c0491d41c.sn.mynetname.net I'll never remember 529c0491d41c, I would like to use mycompanynam...
by GiovanniG
Sun Nov 15, 2015 4:57 pm
Forum: Beginner Basics
Topic: Suggestion for a new project (2SSID in roaming), thank you
Replies: 0
Views: 706

Suggestion for a new project (2SSID in roaming), thank you

Good evening! Thank you for your attention! I'm going to wiring a new restaurant and I'm thinking about Microtic technology, as I've seen it working in another restaurant with the same features I need, here is the description: I have an ethernet cable with public IP from provider, it should be conne...