*) wifiwave2 - limit L2MTU to 1560 until a fix is available for a bug causing interfaces to fail transmitting larger frames than that;

Is this present in 7.11.2 and previous or is it isolated to 7.12 versions?

Yea we always calibrate the poe ports during deployment. Doesn't really seem to make a difference.

Seems to happen once every two to three days now.

Hi, The issue i was hoping was fixed in the new version was unfortunately not the port poe is set to on and the status was disabled. this only every happens on port 2 and is the first time encountering this on 1.15 the uptime on the RB260GSp is 1 day 9 hours at the time of problem. I will attach scr...

Hi becs,

Thank you for the quick response I did get to reboot the RB260 and it came back normally.

Just started upgrading a few of switches from 1.14 that are known to have poe issues remotely and on my 3rd one the firmware didn't upgrade properly showed me a bunch of text on a white screen (looked like code as I noticed it looked like some html code was in there) and then I lost access and unfor...

Hi Samsung172, I have tried disabling it and it didn't change the outcome, I disabled it on the switch and the bridge itself. The way we do this is we route a block of IP addresses to the CCR and put the first IP on the bridge to be the gateway then the vlans in the bridge would be handing out one p...

Hi, What I have done so far is made a bridge with vlan 11 and 12 inside it the two vlans are on interface 2 which goes out to a switch. The sunbet 172.16.88.1/24 is set up with dhcp on the bridge. What I find is that when I plug in my device it gets the ip on vlan 11 but will not get internet access...

This fixed our problem as well, As soon as we would add the vlan to the edgeswitch lite and enable it on the mikrotik everything would stop working, Now it works fine after disabling STP on the switch.

Just so others who may encounter this know, Mikrotik Support says:

Sorry, but unfortunately it is not possible at the moment. We will soon get rid of
wireless-fp (6.36) and then you should not experience problem like this any more.

Just have to wait for RouterOS 6.36...

Hi, Today I tried netinstalling on a haP ac lite as I had previously done with a haP lite and found that after installing wlan2 (5GHz) was gone and the script didn't work, so I did it again but this time applying default config instead. Still didn't work so I took a look at the packages and it appea...

@CoMMyz I heard back from their support with a 1.15RC version of firmware, They said it has some poe fixes but i am not sure whether or not it fixes these problems we are seeing. I had issues with flow control so I turned it off.. Not the best option but it worked better off... Maybe email and ask t...

It looks like the short circuit issue may be linked to the poe in long cable option on the systems page. We have it on our RB260GSp's but I just had the short circuit issue happen again where all ports say short circuit and no matter if I turn off ports and turn them back on nothing changes so I unc...

Im having these issues as well.. anyone have any fixes or know if fixes are coming?

Hi, For probably about over 6 months now we have been using more and more of these switches and are likely around 30 now but are finding more and more issues as we put more out in production. The first issue is the poe out will stop randomly on ports, So it will be set to poe out on and the device w...