Have the same problem, my laptop connected from different ISP through L2TP to my home have full access to home network and home internet connection. But Android can be connected only to home mikrotik by mikrotik app, no internet access, no access to home network. NAT traversal enabled, firewall rule...

Changed roles of routers, master became slave, slave became master and now it's work perfectly. Don't understand why my rb2011 does not work like master and slave in one role... mAP do it perfectly.

On main router you also exclude wlan from local bridge,and configure as it was remote AP. Worked! But... i set "Discovery Interfaces" as bridge-local, instead IP of master "CAPsMAN Addresses", after changing it changed state, but it does not use CAPsMAN config, no any SSID and o...

I even setup other router that managing by main and it's work perfectly. But wifi on main router still does not work.

Remove wlan interface on the device from any birdges you want to use as cap.

It first that i did

HI all! Try to use capsman for my 2 routers, but cant setup it on my first router. After setup looks like wifi does not work at all. No any caps interfaces in list(cap interfaces list, bridge, wifi interfaces) my caps config /caps-man channel add band=2ghz-onlyn control-channel-width=20mhz extension...

You said that the neighbor has his own firewall and you don't want to filter his traffic. The easiest way to completely do that is what I stated in my reply. If fasttrack is bad for your particular situation, then simply remove that one rule. Long story short - either you're filtering your neighbor...

If you want to NOT filter your neighbor's traffic, then that's very easy to do in just two rules. For performance, it's best to fasttrack and allow the already-checked sessions first, so here are what I recommend as your first four rules in the forwarding chain: chain=forward connection-state=estab...

First of all, I would suggest some organization. You have forward chain rules and input chain rules all mixed together. It will work that way, but sure makes it harder to read for us human beings. Firewall rules are handled in the order that they are listed. In the code extract below, since the fir...

Without you posting your configuration, we can only guess. From that we can tell what you are doing to get traffic onto different chains (among other stuff). Use the command: /export hide-sensitive /interface list member add interface=ether1-master-local list=LAN add interface=ether2-slave-local li...

Hi, all! I have network Capture.PNG I want to create some chains on router №1. Chains for traffic to&from internet to my neighbor (router №2) by lists of interfaces WAN-NEIGHBOR,NEIGHBOR-WAN(WAN: pppoe, ether1 NEIGHBOR: ether2). And chains for my network to&from internet (router №1) by lists...

+1 for tls-auth
+1 LZO & UDP
Please.

+1 UDP and LZO

Hello! I'm Install OpenWRT in Metarouter and configure it. But the opkg source not found (wget returned 1). The network is okay I think, I can ping sites: facebook.com, google.com.. I'm test downloads.openwrt.com and get IP from DNS, but can't ping that ip. After test it from realPC, I can't ping i...

Hi all. Two days I build openwrt image with different version of OpenWRT... but stability of build images very bad... some times services crashed, some times router go to cyclical reboot...(I was trying Barrier Breaker 14.07, Attitude Adjustment 12.09 and kamikaze). I need one minimal openwrt vm on ...

Hello guys! I have next config of my mikrotik 2011uias-2hnd-in : ether1 - master-local (1000Mb\s) ether2-5 salve-local (1000Mb\s) ether6-gateway on switch 2 throught this port i have my internet ppoe connection.(100Mb\s) ether7-master-local (100Mb\s) ether8-10 salve-local (100Mb\s) bridget ether1 et...