Community discussions

MikroTik App

Search found 49 matches

by StefanM
Sun Jan 29, 2017 3:51 pm
Forum: Forwarding Protocols
Topic: MPLS LDP over VLAN interface?
Replies: 7
Views: 2230

Re: MPLS LDP over VLAN interface?

Did you try to use physical interface instead of VLAN for setting up LDP?
by StefanM
Thu Jan 26, 2017 6:22 pm
Forum: Virtualization
Topic: CHR HDD space increased to 2GB but still shows no enough space ???
Replies: 2
Views: 2330

CHR HDD space increased to 2GB but still shows no enough space ???

So i have previously opened chr vmdk in VMware player and changed size to 2gb, it all works fine in VMware player i can upload files inside CHR. But when i use that vmdk in ESXI it all works fine i can open that CHR via winbox and it shows 2GB in resource but when ever i want to upload my backup fil...
by StefanM
Mon Jan 23, 2017 6:12 pm
Forum: The Dude
Topic: How to set Default Network Map for Users?
Replies: 2
Views: 1045

Re: How to set Default Network Map for Users?

Hi there, i been looking at dude settings and i couldn't find anywhere how to set default Network Map for user that has only Read rights. What am trying to achieve is, to have separate user that has read rights, and once that user logins to The Dude he will load by default Network Map that has all ...
by StefanM
Mon Jan 23, 2017 5:35 pm
Forum: The Dude
Topic: How to set Default Network Map for Users?
Replies: 2
Views: 1045

How to set Default Network Map for Users?

Hi there, i been looking at dude settings and i couldn't find anywhere how to set default Network Map for user that has only Read rights. What am trying to achieve is, to have separate user that has read rights, and once that user logins to The Dude he will load by default Network Map that has all c...
by StefanM
Fri Nov 04, 2016 11:26 am
Forum: General
Topic: Mikrotik and Zabbix SNMP based on interface name
Replies: 5
Views: 7421

Re: Mikrotik and Zabbix SNMP based on interface name

Sorry for bumping old thread, but better then to open a new one as i want to know what i need to include in host and where to have traffic flow monitoring on zabbix ?
by StefanM
Mon Oct 24, 2016 10:49 pm
Forum: Forwarding Protocols
Topic: Multihoming with one external IP
Replies: 4
Views: 1318

Re: Multihoming with one external IP

Interesting, i would subscribe to this thread to see your progress and how you implement everything.
by StefanM
Wed Oct 05, 2016 4:23 am
Forum: Forwarding Protocols
Topic: Bridging 2 VLANs
Replies: 6
Views: 1419

Re: Bridging 2 VLANs

Well put the two vlans under the same bridge, and ip/dhcp server on that bridge?
by StefanM
Mon Oct 03, 2016 3:40 am
Forum: Announcements
Topic: We have a new homepage!
Replies: 29
Views: 8218

Re: We have a new homepage!

About time, looks very clean and simple. 10/10
by StefanM
Mon Oct 03, 2016 2:04 am
Forum: Forwarding Protocols
Topic: Packet loss on loopback / MPLS / VPLS interfaces only
Replies: 2
Views: 1144

Re: Packet loss on loopback / MPLS / VPLS interfaces only

MTU could be the problem if you forgot to add tags for Vlans
by StefanM
Wed Sep 28, 2016 3:18 am
Forum: Forwarding Protocols
Topic: MPLS/VPLS *over* EoIP - possible?
Replies: 3
Views: 1486

Re: MPLS/VPLS *over* EoIP - possible?

Am also wondering would this be possible ?
by StefanM
Thu Aug 25, 2016 10:01 pm
Forum: Beginner Basics
Topic: How to prioritize traffic of one host?
Replies: 23
Views: 17184

Re: How to prioritize traffic of one host?

I believe PCQ queues would work good for what you want to achieve, and priority 1 when creating queues for specific host
http://wiki.mikrotik.com/wiki/Manual:Queue
by StefanM
Thu Aug 25, 2016 9:58 pm
Forum: General
Topic: load blance
Replies: 7
Views: 1230

Re: load blance

This would have point if you had 2 WAN providers, clarify a bit what you specifically want to achieve?
by StefanM
Thu Aug 25, 2016 9:57 pm
Forum: General
Topic: Routing multiple ISP
Replies: 3
Views: 1652

Re: Routing multiple ISP

Here are some threads to look up
http://forum.mikrotik.com/viewtopic.php?t=74271

you can always use 1:1 NAT and translate your private ip to public ip of /24 range that you have from your isp.
by StefanM
Thu Aug 25, 2016 9:51 pm
Forum: Forwarding Protocols
Topic: Problem with MPLS TE VPLS
Replies: 13
Views: 2727

Re: Problem with MPLS TE VPLS

did you advertise your loopback ip as well or you only have it in instance id in ospf? and for advertise filter in mpls you can use /24 instead of /32.
by StefanM
Thu Aug 25, 2016 9:49 pm
Forum: Forwarding Protocols
Topic: MPLS + LDP Logging
Replies: 12
Views: 3274

Re: MPLS + LDP Logging

I discovered this recently when i try'd to troubleshoot problem with vpls, and seen that there is no logging for vpls as well and mpls is not working at all.
by StefanM
Thu Aug 25, 2016 9:46 pm
Forum: Beginner Basics
Topic: How to enable port 80 in microtik router SXT5 so that i can access my local xampp server remotely
Replies: 9
Views: 1379

Re: How to enable port 80 in microtik router SXT5 so that i can access my local xampp server remotely

You need to nat your private ip of your server to public ip that you have from your isp and forward ports that you need, 80 for http 443 for https.
http://wiki.mikrotik.com/wiki/How_to_li ... Local_ones
http://wiki.mikrotik.com/wiki/NAT_Tutorial

Check this threads above.
by StefanM
Tue Aug 23, 2016 7:52 pm
Forum: Forwarding Protocols
Topic: How to share my server to public network
Replies: 3
Views: 908

Re: How to share my server to public network

at least give us ip's so we can help you out, but yes you need to nat your private ip to public ip with specific ports that you need.
by StefanM
Sun Jul 17, 2016 9:15 pm
Forum: Forwarding Protocols
Topic: QSPF question for experts
Replies: 9
Views: 1890

Re: QSPF question for experts

I also dug up my previous report of this bug, and Mikrotik stated that this behavior will be fixed in ROSv7. This seems like too large of a bug to leave un-fixed in ROSv6. i wasn't aware of this, thanks! And am joining to a list that this needs to be fixed in next stabile update of ROSv6, not to wa...
by StefanM
Sun Jul 17, 2016 9:10 pm
Forum: Forwarding Protocols
Topic: NAT performance CCR1009-8G-1S-1S+
Replies: 13
Views: 2354

Re: NAT performance CCR1009-8G-1S-1S+

Do you use mange rules that can cause high cpu with that kind of traffic?
by StefanM
Sun Jul 17, 2016 9:09 pm
Forum: Forwarding Protocols
Topic: hallo everyone,
Replies: 1
Views: 497

Re: hallo everyone,

Am sure no1 will volunteer but we can help each other :) http://forum.mikrotik.com/viewtopic.php?t=59234
by StefanM
Wed Jul 13, 2016 7:32 pm
Forum: Forwarding Protocols
Topic: Traffic Engineering second tunnel path not working
Replies: 2
Views: 733

Traffic Engineering second tunnel path not working

Hey all, i come across one issue that took my attention in tho troubleshooting but am just stuck here, so i though to ask here in mean time. From one core router to 2nd router there are two links, and 9 hops. First situation is traffic path interface is running on Core router with path of: 10.10.11....
by StefanM
Tue Jul 05, 2016 9:44 pm
Forum: Forwarding Protocols
Topic: BGP and Public IP configuration
Replies: 3
Views: 1440

Re: BGP and Public IP configuration

It's possible, but why would you use bgp ? You can use ospf instead and do 1:1 nat on your core router to private ip that you want your client to have public ip, or either provide public ip's over pppoe?
by StefanM
Tue Jul 05, 2016 8:34 pm
Forum: Beginner Basics
Topic: PPPoE Setup for WISP
Replies: 1
Views: 922

Re: PPPoE Setup for WISP

you can have userman on your core router, and have every user there in place with their package.
by StefanM
Sat Jun 18, 2016 3:32 am
Forum: General
Topic: RouterOS v6.x with Ubiquiti AirFiber 24 v2.0 - RX Error FCS
Replies: 76
Views: 32809

Re: RouterOS v6.x with Ubiquiti AirFiber 24 v2.0 - RX Error FCS

Thanks for this post, am experiencing the same problem wires are inspected and replaced but this fcs error still happens will follow up with some ideas from previous posts
by StefanM
Fri Jun 17, 2016 3:46 am
Forum: Wireless Networking
Topic: Wireless performance very bad - what am I doing wrong?
Replies: 3
Views: 1085

Re: Wireless performance very bad - what am I doing wrong?

you need to choose frequency with less usage, i assuming thats the main problem there.
by StefanM
Fri Jun 17, 2016 3:41 am
Forum: Beginner Basics
Topic: pls help on how to limit speed in lan users on switch and stations on my access point
Replies: 2
Views: 661

Re: pls help on how to limit speed in lan users on switch and stations on my access point

you can create simple queues for range of ip addresses if you planning on using dhcp server you can make ip's static and limit specific ip's also with pcq queues this is a good thing to start with http://wiki.mikrotik.com/wiki/Manual:Queue  on nano stations you have in network tab use advance last o...
by StefanM
Thu Jun 16, 2016 2:35 am
Forum: General
Topic: Unable to access MKT via WAN port by WinBox
Replies: 5
Views: 1332

Re: Unable to access MKT via WAN port by WinBox

start of pinging that ip of mikrotik, see if winbox services are enabled, try ssh.. 
by StefanM
Thu Jun 16, 2016 2:22 am
Forum: General
Topic: Public-Mikrotik-Bandwidth-Test-Server(s)
Replies: 649
Views: 583160

Re: 3.5 GIG - Public-Mikrotik-Bandwidth-Test-Server

Thanks for this.
by StefanM
Fri Jun 10, 2016 5:09 am
Forum: Forwarding Protocols
Topic: OSPF losing routes randomly
Replies: 19
Views: 3343

Re: OSPF losing routes randomly

Glad you solve the problem, useful info to know also.
by StefanM
Fri Jun 10, 2016 4:52 am
Forum: Scripting
Topic: Save a backup to FTP once it is done locally
Replies: 2
Views: 1016

Re: Save a backup to FTP once it is done locally

There is a script by Harry http://harry.subnetworx.de/2013/12/27/a ... ackup-ftp/

i had no chance to try it out yet, if you test it please let me know how it works. :)
by StefanM
Tue May 24, 2016 1:55 am
Forum: Forwarding Protocols
Topic: VPLS/MPLS via ospf in wireless network
Replies: 31
Views: 6704

Re: VPLS/MPLS via ospf in wireless network

and do you change your MTU on your back hauls ? you need to adjust these as well.
From where VPLS is setup from all the way to the AP on this section has the same MPLS L2MTU 1526 ?
try with 1536
by StefanM
Sat May 21, 2016 12:48 am
Forum: Forwarding Protocols
Topic: VPLS/MPLS via ospf in wireless network
Replies: 31
Views: 6704

Re: VPLS/MPLS via ospf in wireless network

and do you change your MTU on your back hauls ? you need to adjust these as well.
by StefanM
Tue May 17, 2016 7:00 pm
Forum: General
Topic: Dual WAN question regarding splitting specific traffic
Replies: 0
Views: 875

Dual WAN question regarding splitting specific traffic

So am wondering would be possible to split traffic if i have Two WAN's connected to Mikrotik example what am trying to accomplish. add action=mark-connection chain=prerouting comment=VOIP new-connection-mark=\ VOIP port=5060,5061,10000-20000 protocol=udp add action=mark-routing chain=prerouting comm...
by StefanM
Tue Apr 19, 2016 3:13 pm
Forum: General
Topic: Winbox on OS X 10.11 El Capitan - it's a way to fix it the easy way
Replies: 39
Views: 130575

Re: Winbox on OS X 10.11 El Capitan - it's a way to fix it the easy way

This guy Joshaven has made windbox for os x and it's pretty stabile and good, i been using 3.0 for a while and am downloading now 3.4 if anyone needs this is his blog where you can find it and download it http://joshaven.com/resources/tools/winbox-for-mac/
by StefanM
Fri Apr 15, 2016 7:10 pm
Forum: Forwarding Protocols
Topic: 3 Gateway and IP PUBLIC
Replies: 8
Views: 1582

Re: 3 Gateway and IP PUBLIC

okay, so in that case you can also use PPPOE or like mrz have told above, you can nat all private to public ip's so that would also work.
by StefanM
Fri Apr 08, 2016 4:08 am
Forum: Forwarding Protocols
Topic: OSFP setup
Replies: 4
Views: 1132

Re: OSFP setup

there is no need for ospf setup in environment like this, like post above have mention use static routing instead and 1:1 nat private to public ip.
by StefanM
Fri Apr 08, 2016 3:58 am
Forum: Forwarding Protocols
Topic: Routing Public IP address in this Environment
Replies: 3
Views: 1100

Re: Routing Public IP address in this Environment

well you would need to do nat private ip to public ip, and having that public subnet on your interface, or just make dhcp pool with public ip's and give them public ip's instead of private but that depends how are their edge devices configured.
by StefanM
Wed Apr 06, 2016 12:54 am
Forum: Forwarding Protocols
Topic: IPsec Life time problem
Replies: 11
Views: 6355

Re: IPsec Life time problem

Would you try 6.29.1, no any issues on IPsec lifetime there so far.
by StefanM
Wed Apr 06, 2016 12:41 am
Forum: Beginner Basics
Topic: IPSEC VPN between PaloAlto and Mikrotik
Replies: 14
Views: 7388

Re: IPSEC VPN between PaloAlto and Mikrotik

@StefanM 1. I highly doubt DNS will solve anything, as everything is IP related. How do I disable remote request? 2. You can see in previous posts my whole router config, could you please tell me which firewall rules have to be removed? 2. It's an IP/IPsec tunnel. So by removing peer, I will genera...
by StefanM
Tue Apr 05, 2016 2:53 pm
Forum: Beginner Basics
Topic: IPSEC VPN between PaloAlto and Mikrotik
Replies: 14
Views: 7388

Re: IPSEC VPN between PaloAlto and Mikrotik

you should remove default configuration when ever you configure mikrotik and do it from scratch. Try changing: Dns to point to google disable remote request thats important remove default firewall config change ip sec peer to 0.0.0.0/0 and enable Nat traversal, change policy to port override and wha...
by StefanM
Sun Apr 03, 2016 2:33 pm
Forum: Forwarding Protocols
Topic: IPsec Life time problem
Replies: 11
Views: 6355

Re: IPsec Life time problem

just having the same problem. could you solve this?
Whats the version of Router OS your using ?
by StefanM
Sun Apr 03, 2016 2:30 pm
Forum: Announcements
Topic: Winbox3.4 released!
Replies: 54
Views: 24084

Re: Winbox3.4 released!

Are there any plans for official version of windbox for os x ?
by StefanM
Wed Mar 30, 2016 12:30 am
Forum: General
Topic: user interface
Replies: 19
Views: 4348

Re: user interface

I don't think user interface is so much important to be changed, functions and optimization is what matters.
by StefanM
Wed Mar 30, 2016 12:17 am
Forum: Announcements
Topic: v6.34.4 [current] is released!
Replies: 30
Views: 17144

Re: v6.34.4 [current] is released!

So what happen earlier yesterday is after upgrading one of my test mikrotiks to v6.34.4 and we did some testings for ipv6 and after rebooting router my wireless interface disappeared, did couple of reboots and it was not there, the package was enabled and everything looked fine but after rebooting a...
by StefanM
Fri Mar 25, 2016 8:49 pm
Forum: General
Topic: Which USB-Ethernet adaptor can I use ?
Replies: 7
Views: 2714

Re: Which USB-Ethernet adaptor can I use ?

Sorry for replaying to old post i know, but just to mention in future if some one wondering. USB 2.0 works fine and for 1Gbps there is thunderbolt ethernet adapter, so it does not use any of usb ports, it use thunderbolt port on Apple macbook's
by StefanM
Wed Feb 17, 2016 5:22 am
Forum: Forwarding Protocols
Topic: Challenge if anyone is up to it.
Replies: 10
Views: 1394

Re: Challenge if anyone is up to it.

Would you be kind to illustrate network map with routers connected and their subnets please, it looks really interesting that i would like to try in a lab.


Thanks