We have router RBSXTR&R11e-LTE , we face high CPU utilization reaches to 100 % when enabling snmp . can any one help please ?

Dears

I have IPv4 BGP peer and I want to advertise IPV6 subnet /63 ... I add it to the network in bgp and add loopback interface /63 and use redistribute connected .. but the network doesnt appear in advertisement .. any help please ?

That's correct. You cannot force anyhow the server sending udp packets to slow down them according to your wish. It just sends what it wants and you are dropping the packets that overflow the quota... so if I have for example 6 M bandwidth and want to give router1 5M and router2 1M ... if router 1 ...

HI if we have the below scenario in the first attached picture when router 2 reach its maximum limit ( 5M ) the IN interface traffic is about 6 M or more if router 2 has high number of connections so if I have customer with band 5M , it costs 6 M in reality ( see the second attached picture ) is the...

Open winbox, click on "new Terminal" and look at logs.

thank you ... what about second question .. does it mean that the user and password is sent in clear text ?

If terminal window is open in winbox, that is telnet session.

sorry can you clarify more ?

Hi

I noticed in many mikrotik routers that when I login via winbox to router it appears " user logged in via telnet " .. why this is appear ? also it may affect the security of secure mode login session ?

Netinstall doesnt solve the problem .. the device appear in netinstall and we install the packages , but after reboot the same problem ... one beep and loud voice from fans

the public IP s are loopback interfaces

No I cannot use src-address , I use the same pools for different pppoe servers ... I tried to use in interface for matching ... but it doesnt working

each interface of mikrotik RB is pppoe server ... and these interfaces connected to pppoe clients ( such as sectors )

I need to specify public IP for pppoe clients in one sector

Hello

I have a pppoe server as shown in the picture


how can I configure NAT to specify Public IP for each pppoe clients in one pppoe server ?

Dears I want to deliver pppoe users that are connected to mikrotik RB with thunder cache and deliver them cached http traffic I use the following commands but it doesnt work /ip firewall mangle add action=mark-routing chain=prerouting disabled=no dst-port=80 in-interface=\ !ether4-cache new-routing-...