I have some equipment that use 24v dc together with ethernet. I also have some left over Mikrotik HEX lite devices that only support passive POE. Is there any way i can split the passive 24v POEoutput from the HEX lite and power my device with that? It only needs 5-10w. I am aware that if the device...

Hi, thanks for the replies. MT just referred to the local vendor, which talked to MT and they both agreed that it is outside the 1y warranty so not much they could do. I also got a quote for a new PSU, but at $195 it didnt seem like the obvious choice. Is there somewhere these PSU's can be ordered f...

Hi Just did an autopsy of a broken CRS328 2019 model. It seems like an IC let out the magic smoke, anyone that know the part no. of this component? If someone has some schematics that would also be of great help. On another note. Is this a common problem on these switches? IMG_3722.jpg IMG_3719-copy...

It might be that you are providing 24v to the input. And as the device has no dc/dc conversion it will only provide its own line voltage to the POE port. If the connected devices require the POE/POE+ voltage of 48-57 volts to turn on, it will remain off. However, if you set the power to always on, i...

Yes, you can use them outdoors in cold northern Norway. Just make sure to mount the unit with cable pointing downwards, since some water could seep into the case next to the cable opening, depends on how you close it's lid.

Thanks alot!

So you want to know if it can be used outdoors ?

Yes! Do you have any information regarding this?

Hi I am concidering running 3 pairs of RBwAPG-60adkit to connect some buildings, but i cannot find anything conclusive regarding these units in an outdoor climate. I find that in the brocure they say that they can be mast mounted, but thats the only reference i can find. They will be mounted outdoor...

Hi all

I recently got a reply from MT after sending them the support files from affected switches. The said that I should start an RMA process with my vendor. I did and got the new qsfp switch instead. Has worked flawlessly so far.

Anyone tested the CRS326-24S+2Q+RM yet?

Hi! I just found this topic. Did you use the Mikrotik switch through an UPS(uninterruptible power supply - sinus wave type) hardware ? If not, then this maybe a main problem - the power supply might have receiving some OVP/OCP/SCP effects - causing the port flapping. In my case - yes, they were on ...

Hi people! Looks like MT is finally stepping up. I got this email from them today. We got the Supout.rif from CRS317 that you just sent, looks like we didn't receive couple of emails that you sent previously (sic) . But yeah, from Supout.rif we can see that CRS317 - 846C083E29E4 is indeed faulty and...

Hi! I just found this topic. Did you use the Mikrotik switch through an UPS(uninterruptible power supply - sinus wave type) hardware ? If not, then this maybe a main problem - the power supply might have receiving some OVP/OCP/SCP effects - causing the port flapping. In my case - yes, they were on ...

To all posters here, i'm afraid that this is a combination of HW and SW problem when there's a SFP+ connection between CRS 317 and CRS 328 and simply put, don't expect that anything's gonna change anytime soon. We've replaced CRS 328 with much more expensive Cisco devices and it works like a charm....

as MK support said: "if possible, please, consider using CRS309-1G-8S+ as replacement in similar applications to decrease probability of encountering this issue." :shock: :shock: :shock: :shock: :shock: :shock: :shock: If this is the case - it is simply not good enough. I have 30 of these...

Have anyone gotten any time estimates on when flapgate is beeing fixed?

Hi Looking for a VPN or tunnel of some sort suitable for use in IOT applications. Ideally i could have a sim card with a ~10mb data cap costing allmost nothing and a VPN for debugging, snmp and such. But most VPNs i have tested (IPSec in particular) use quite a bit of data as part of their keep aliv...

Could you please send us email, about your setup and problem, to support@mikrotik.com?

Ticket#2019040322003846

Where do i get additional information about tickets? I see no links in the emails i have gotten.

Have the same problem with UF-SM-10G & CRS317-1G-16S+ with 6.42.12.
Any RoOS version with fix?

Could you please send us email, about your setup and problem, to support@mikrotik.com?

Hi! How Is the fix coming along?

hello folks, update: After we switched on the CRS317-1G-16S+ to SwitchOS 2.9 5 days without port flapping. :) regards This is good news and indicative of software issues. Raising the probability of a fix. I have however met nothing but radio silence from MT lately, have any of you guys gotten any i...

Are any of you using port ether1 or just sfp-plus ports? If you are, remember that "The new Cloud Router Switch 317-1G-16S+RM is a rack-mountable manageable switch with Layer3 features, it has 16 SFP+ ports for high performance 10GbE connectivity and a 1GbE copper port for management. " I...

I sendt MT a service dump in november - still no answer. Could i bother you guys that are experiencing the same problem with sending MT an email urging them to have a look at the issue - or at least give some feedback. I am experiencing total radio silence.

From the MikroTik site it looks to me like the S+32LC10D is specifically meant to have the S+23LC10D module on the other end. Are you using the same module on both ends?

I am using the paired SFP+ from Mikrotik S+2332LC10D. So yes.

I have the SAME EXACT problem. Mikrotik needs to fix this. No problem with 1Gbps SFP but with OWM SFP+ it's hell. I think this could be combination of software and hardware problem with SFP+ modules. I agree with you assumtion that this is an edge case between the SFP units and the switch. But stra...

Unfortunately not. I sendt them the support files at 22. Nov and did a follow up on 4. Des. Still no reply. Would be great if MT would have a look at this.

Try 6.43.7 and make sure routerboot is also updated.

Sad to say, but this made no difference.

Sure, i dont see anything about the 317s in the changelog, but i'll try. Will give a new status in about 24h, will see if anything has changed.

Hi I am running 17 CRS328-24P-4S+ connected to 2 CRS317-1G-16S+ using this SFP S+32LC10D. The 328 boxes are running RouterOS 6.43.2 and the CRS317 boxes are running 6.43.4. I am experiencing that all the ports on the CRS317 are going up and down with anything between minutes to hours apart. It is al...

I'm having some strange issues with my AP. When i enable all three chains on the wireless nic, i get package loss on all interfaces. But with only chain0 and chain1 enabled (both rx and tx) - it works fine and i am getting ~200mbit/s a few meters away from it. It is running fw version 3.33 and Route...

I was indeed peaking the capabilities of the router. The CPU was peaking. The reason why i did not suspect this at first, was that the CPU peaked and blocked the GUI update before the counter got to 100% - leaving me with a stable far lower number. I figured this out by doing a speed test with a ram...

I am experience some performance issues on my RB 750. Its running RouterOS 6.33.3 and FW version 3.24. I am not running a HotSpot, no queues and about 20 firewall rules. Over NAT i am currently only getting about 210mbit/s of my line that should be 250mbit/s. I have of course tried it without the RB...