Hi, I wanted to put back into service a cAP ac that I had not used for about 2 years. Subnets etc I did not change during this time and the cAP ac was running at that time. Now I can no longer reach it. Tried: - winBox on the network where the router was running. - winBox with direct connection, als...

Hi,
cAP ac configured as access point.
Applications in m LAN cannot reach my mobile phone (connected to WLAN Port) . This used to work with my old (and otherwise lousy) ???-Router (no bashing).
Any hint, what I did mess up or miss?

TIA
Michael

Got it. The problem was eth1 belonging to interface list "WAN".
I set it to "LAN" and everything is workisg as expected.
Eth1 is connected to my LAN and I can connect another PC to eth2.
WLAN ist ok.

Thank you,

but the DHCP Server ist running on my Windows Server 2012 R2 Box connected to the other ethernet interface.

Hi,

are there any informations on PIM? I didn't find anything in the wiki.

TIA
Michael

Thank You all,

all interfaces are now glued to the preconfigured bridge "bridge".
But a PC connected to ether1 still doesn't get an IP address from my server.


Any help appreciated
Michael

Hi,

I got my cAP ac almost running as I want to. There is one Problem remaining and I don't know how to achieve this.
My LAN is connected to Eth2, and I want Eth1 to be in the same network as Eth2, so that I can connect a PC via the cAP ac into my LAN.

TIA
Michael

Hi,

sorry for answering myself and for posting this question.
The problem was a wrong gateway address at the internet part of quick setup.

Thank You
Michael

thank you.
CAP ac: Ping resolves the address correctly, but fails with a timeout.
Pinging from a PC in the same network does work!
TIA
Michael

Hello,

I just have been able tu update my CRS125 to 6.42.
On my CAP ac the update fails with "ERROR: Connection timed out".
Connected WiFi devices have Internet access, and DNS resolution on the CAP ac seems to work.
Where can I look further?
TIA
Michael

Thank You very much,

now I got the AP working as expected.

Michael

Thank You,

I tried, but this did't work either (PC connected via Switch to eth1).

Hello, I managed once to get this Setup working. Later I had to reset the router (5s reset button while booting). And now I can't get to work the AP mode. Router OS is 6.41.4. Router is connected via Eth1 to my LAN. Configuring from a PC in the LAN. Procedure: Quick Set => "Home AP Dual" (...

Hi, I recently bought a MikroTik CRS125-24G-1S-RM. What I want to achieve is 4 separated LANS with some connection between the LANs. 172.12.1.0/24 internal LAN (work) 172.12.65.0/24 guest LAN 172.12.129/24 VOIP LAN 172.12.254/24 "outer" LAN with my provider's internet router I set up 4 por...